| /* |
| * (C) Copyright 2000 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <watchdog.h> |
| #include <405gp_enet.h> |
| #include <asm/processor.h> |
| #include <ppc4xx.h> |
| |
| |
| #define mtebc(reg, data) mtdcr(ebccfga,reg);mtdcr(ebccfgd,data) |
| |
| |
| /* |
| * Breath some life into the CPU... |
| * |
| * Set up the memory map, |
| * initialize a bunch of registers |
| */ |
| void |
| cpu_init_f (void) |
| { |
| /* |
| * External Bus Controller (EBC) Setup |
| */ |
| #if (defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR)) |
| /* |
| * Move the next instructions into icache, since these modify the flash |
| * we are running from! |
| */ |
| asm volatile(" bl 0f" ::: "lr"); |
| asm volatile("0: mflr 3" ::: "r3"); |
| asm volatile(" addi 4, 0, 14" ::: "r4"); |
| asm volatile(" mtctr 4" ::: "ctr"); |
| asm volatile("1: icbt 0, 3"); |
| asm volatile(" addi 3, 3, 32" ::: "r3"); |
| asm volatile(" bdnz 1b" ::: "ctr", "cr0"); |
| asm volatile(" addis 3, 0, 0x0" ::: "r3"); |
| asm volatile(" ori 3, 3, 0xA000" ::: "r3"); |
| asm volatile(" mtctr 3" ::: "ctr"); |
| asm volatile("2: bdnz 2b" ::: "ctr", "cr0"); |
| |
| mtebc(pb0ap, CFG_EBC_PB0AP); |
| mtebc(pb0cr, CFG_EBC_PB0CR); |
| #endif |
| |
| #if (defined(CFG_EBC_PB1AP) && defined(CFG_EBC_PB1CR)) |
| mtebc(pb1ap, CFG_EBC_PB1AP); |
| mtebc(pb1cr, CFG_EBC_PB1CR); |
| #endif |
| |
| #if (defined(CFG_EBC_PB2AP) && defined(CFG_EBC_PB2CR)) |
| mtebc(pb2ap, CFG_EBC_PB2AP); |
| mtebc(pb2cr, CFG_EBC_PB2CR); |
| #endif |
| |
| #if (defined(CFG_EBC_PB3AP) && defined(CFG_EBC_PB3CR)) |
| mtebc(pb3ap, CFG_EBC_PB3AP); |
| mtebc(pb3cr, CFG_EBC_PB3CR); |
| #endif |
| |
| #if (defined(CFG_EBC_PB4AP) && defined(CFG_EBC_PB4CR)) |
| mtebc(pb4ap, CFG_EBC_PB4AP); |
| mtebc(pb4cr, CFG_EBC_PB4CR); |
| #endif |
| |
| #if (defined(CFG_EBC_PB5AP) && defined(CFG_EBC_PB5CR)) |
| mtebc(pb5ap, CFG_EBC_PB5AP); |
| mtebc(pb5cr, CFG_EBC_PB5CR); |
| #endif |
| |
| #if (defined(CFG_EBC_PB6AP) && defined(CFG_EBC_PB6CR)) |
| mtebc(pb6ap, CFG_EBC_PB6AP); |
| mtebc(pb6cr, CFG_EBC_PB6CR); |
| #endif |
| |
| #if (defined(CFG_EBC_PB7AP) && defined(CFG_EBC_PB7CR)) |
| mtebc(pb7ap, CFG_EBC_PB7AP); |
| mtebc(pb7cr, CFG_EBC_PB7CR); |
| #endif |
| |
| #if defined(CONFIG_WATCHDOG) |
| unsigned long val; |
| |
| val = mfspr(tcr); |
| val |= 0xf0000000; /* generate system reset after 2.684 seconds */ |
| mtspr(tcr, val); |
| |
| val = mfspr(tsr); |
| val |= 0x80000000; /* enable watchdog timer */ |
| mtspr(tsr, val); |
| |
| reset_4xx_watchdog(); |
| #endif /* CONFIG_WATCHDOG */ |
| } |
| |
| /* |
| * initialize higher level parts of CPU like time base and timers |
| */ |
| int cpu_init_r (void) |
| { |
| #ifdef CONFIG_405GP |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| bd_t *bd = gd->bd; |
| unsigned long reg; |
| uint pvr = get_pvr(); |
| |
| /* |
| * Write Ethernetaddress into on-chip register |
| */ |
| reg = 0x00000000; |
| reg |= bd->bi_enetaddr[0]; /* set high address */ |
| reg = reg << 8; |
| reg |= bd->bi_enetaddr[1]; |
| out32 (EMAC_IAH, reg); |
| |
| reg = 0x00000000; |
| reg |= bd->bi_enetaddr[2]; /* set low address */ |
| reg = reg << 8; |
| reg |= bd->bi_enetaddr[3]; |
| reg = reg << 8; |
| reg |= bd->bi_enetaddr[4]; |
| reg = reg << 8; |
| reg |= bd->bi_enetaddr[5]; |
| out32 (EMAC_IAL, reg); |
| |
| /* |
| * Set edge conditioning circuitry on PPC405GPr |
| * for compatibility to existing PPC405GP designs. |
| */ |
| if ((pvr & 0xfffffff0) == (PVR_405GPR_RB & 0xfffffff0)) { |
| mtdcr(ecr, 0x60606000); |
| } |
| |
| #endif /* CONFIG_405GP */ |
| return (0); |
| } |