| /* |
| * (C) Copyright 2006 |
| * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com |
| * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com |
| * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com |
| * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com |
| * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com |
| * |
| * (C) Copyright 2006-2007 |
| * Stefan Roese, DENX Software Engineering, sr@denx.de. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| /* define DEBUG for debug output */ |
| #undef DEBUG |
| |
| #include <common.h> |
| #include <asm/processor.h> |
| #include <asm/io.h> |
| #include <ppc440.h> |
| |
| extern int denali_wait_for_dlllock(void); |
| extern void denali_core_search_data_eye(void); |
| |
| |
| #if defined(CONFIG_NAND_SPL) |
| /* Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big |
| * for the 4k NAND boot image so define bus_frequency to 133MHz here |
| * which is save for the refresh counter setup. |
| */ |
| #define get_bus_freq(val) 133000000 |
| #endif |
| |
| /************************************************************************* |
| * |
| * initdram -- 440EPx's DDR controller is a DENALI Core |
| * |
| ************************************************************************/ |
| phys_size_t initdram (int board_type) |
| { |
| #if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) |
| #if !defined(CONFIG_NAND_SPL) |
| ulong speed = get_bus_freq(0); |
| #else |
| ulong speed = 133333333; /* 133MHz is on the safe side */ |
| #endif |
| |
| mtsdram(DDR0_02, 0x00000000); |
| |
| mtsdram(DDR0_00, 0x0000190A); |
| mtsdram(DDR0_01, 0x01000000); |
| mtsdram(DDR0_03, 0x02030602); |
| mtsdram(DDR0_04, 0x0A020200); |
| mtsdram(DDR0_05, 0x02020308); |
| mtsdram(DDR0_06, 0x0102C812); |
| mtsdram(DDR0_07, 0x000D0100); |
| mtsdram(DDR0_08, 0x02430001); |
| mtsdram(DDR0_09, 0x00011D5F); |
| mtsdram(DDR0_10, 0x00000300); |
| mtsdram(DDR0_11, 0x0027C800); |
| mtsdram(DDR0_12, 0x00000003); |
| mtsdram(DDR0_14, 0x00000000); |
| mtsdram(DDR0_17, 0x19000000); |
| mtsdram(DDR0_18, 0x19191919); |
| mtsdram(DDR0_19, 0x19191919); |
| mtsdram(DDR0_20, 0x0B0B0B0B); |
| mtsdram(DDR0_21, 0x0B0B0B0B); |
| mtsdram(DDR0_22, 0x00267F0B); |
| mtsdram(DDR0_23, 0x00000000); |
| mtsdram(DDR0_24, 0x01010002); |
| if (speed > 133333334) |
| mtsdram(DDR0_26, 0x5B26050C); |
| else |
| mtsdram(DDR0_26, 0x5B260408); |
| mtsdram(DDR0_27, 0x0000682B); |
| mtsdram(DDR0_28, 0x00000000); |
| mtsdram(DDR0_31, 0x00000000); |
| mtsdram(DDR0_42, 0x01000006); |
| mtsdram(DDR0_43, 0x030A0200); |
| mtsdram(DDR0_44, 0x00000003); |
| mtsdram(DDR0_02, 0x00000001); |
| |
| denali_wait_for_dlllock(); |
| #endif /* #ifndef CONFIG_NAND_U_BOOT */ |
| |
| #ifdef CONFIG_DDR_DATA_EYE |
| /* -----------------------------------------------------------+ |
| * Perform data eye search if requested. |
| * ----------------------------------------------------------*/ |
| denali_core_search_data_eye(); |
| #endif |
| |
| /* |
| * Clear possible errors resulting from data-eye-search. |
| * If not done, then we could get an interrupt later on when |
| * exceptions are enabled. |
| */ |
| set_mcsr(get_mcsr()); |
| |
| return (CONFIG_SYS_MBYTES_SDRAM << 20); |
| } |