| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2020 Gateworks Corporation |
| */ |
| |
| #include "imx8mm-venice-u-boot.dtsi" |
| |
| &gpio1 { |
| uart1_rs422 { |
| gpio-hog; |
| output-high; |
| gpios = <0 GPIO_ACTIVE_HIGH>; |
| line-name = "uart1_rs422#"; |
| }; |
| |
| uart1rs485 { |
| gpio-hog; |
| output-high; |
| gpios = <3 GPIO_ACTIVE_HIGH>; |
| line-name = "uart1_rs485#"; |
| }; |
| |
| uart1rs232 { |
| gpio-hog; |
| output-high; |
| gpios = <5 GPIO_ACTIVE_HIGH>; |
| line-name = "uart1_rs232#"; |
| }; |
| |
| dig1in { |
| gpio-hog; |
| input; |
| gpios = <6 GPIO_ACTIVE_HIGH>; |
| line-name = "dig1_in"; |
| }; |
| |
| dig1out { |
| gpio-hog; |
| output-low; |
| gpios = <7 GPIO_ACTIVE_HIGH>; |
| line-name = "dig1_out"; |
| }; |
| }; |
| |
| &gpio4 { |
| uart3_rs232 { |
| gpio-hog; |
| output-high; |
| gpios = <6 GPIO_ACTIVE_HIGH>; |
| line-name = "uart3_rs232#"; |
| }; |
| |
| uart3_rs422 { |
| gpio-hog; |
| output-high; |
| gpios = <7 GPIO_ACTIVE_HIGH>; |
| line-name = "uart3_rs422#"; |
| }; |
| |
| uart3_rs485 { |
| gpio-hog; |
| output-high; |
| gpios = <8 GPIO_ACTIVE_HIGH>; |
| line-name = "uart3_rs485#"; |
| }; |
| |
| uart4_rs485 { |
| gpio-hog; |
| output-high; |
| gpios = <27 GPIO_ACTIVE_HIGH>; |
| line-name = "uart4_rs485#"; |
| }; |
| |
| sim1det { |
| gpio-hog; |
| input; |
| gpios = <29 GPIO_ACTIVE_HIGH>; |
| line-name = "sim1_det"; |
| }; |
| |
| sim2det { |
| gpio-hog; |
| input; |
| gpios = <30 GPIO_ACTIVE_HIGH>; |
| line-name = "sim2_det"; |
| }; |
| }; |
| |
| &gpio5 { |
| dig2out { |
| gpio-hog; |
| output-low; |
| gpios = <3 GPIO_ACTIVE_HIGH>; |
| line-name = "dig2_out"; |
| }; |
| |
| dig2in { |
| gpio-hog; |
| input; |
| gpios = <4 GPIO_ACTIVE_HIGH>; |
| line-name = "dig2_in"; |
| }; |
| |
| sim2sel { |
| gpio-hog; |
| output-low; |
| gpios = <5 GPIO_ACTIVE_HIGH>; |
| line-name = "sim2_sel"; |
| }; |
| |
| uart4_rs232 { |
| gpio-hog; |
| output-high; |
| gpios = <10 GPIO_ACTIVE_HIGH>; |
| line-name = "uart4_rs232#"; |
| }; |
| |
| uart4_rs422 { |
| gpio-hog; |
| output-high; |
| gpios = <13 GPIO_ACTIVE_HIGH>; |
| line-name = "uart4_rs422#"; |
| }; |
| }; |
| |
| &fec1 { |
| phy-reset-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; |
| phy-reset-duration = <1>; |
| phy-reset-post-delay = <1>; |
| }; |
| |
| &pinctrl_fec1 { |
| u-boot,dm-spl; |
| }; |
| |
| &{/soc@0/bus@30800000/i2c@30a30000/pmic@4b} { |
| u-boot,dm-spl; |
| }; |
| |
| &{/soc@0/bus@30800000/i2c@30a30000/pmic@4b/regulators} { |
| u-boot,dm-spl; |
| }; |
| |
| &pinctrl_pmic { |
| u-boot,dm-spl; |
| }; |