| /* SPDX-License-Identifier: GPL-2.0+ */ |
| |
| /* |
| * Copyright (C) 2017 Armadeus Systems |
| */ |
| |
| /* Environment is stored in the eMMC boot partition */ |
| |
| env_version=100 |
| consoledev=ttymxc0 |
| board_name=opos6ul |
| fdt_addr=0x88000000 |
| fdt_high=0xffffffff |
| fdt_name=opos6uldev |
| initrd_high=0xffffffff |
| ip_dyn=yes |
| stdin=serial |
| stdout=serial |
| stderr=serial |
| mmcdev=0 |
| mmcpart=2 |
| mmcroot=/dev/mmcblk0p2 ro |
| mmcrootfstype=ext4 rootwait |
| kernelimg=opos6ul-linux.bin |
| splashpos=0,0 |
| splashimage=CONFIG_SYS_LOAD_ADDR |
| videomode=video=ctfb:x:800,y:480,depth:18,pclk:33033,le:96,ri:96,up:20,lo:21,hs:64,vs:4,sync:0,vmode:0 |
| check_env=if test -n ${flash_env_version}; |
| then env default env_version; |
| else env set flash_env_version ${env_version}; env save; |
| fi; |
| if itest ${flash_env_version} != ${env_version}; then |
| echo "*** Warning - Environment version |
| change suggests: run flash_reset_env; reset"; |
| env default flash_reset_env; |
| else exit; fi; |
| flash_reset_env=env default -f -a && saveenv && |
| echo Environment variables erased! |
| download_uboot_spl=tftpboot ${loadaddr} ${board_name}-u-boot.spl |
| flash_uboot_spl= |
| if mmc dev 0 1; then |
| setexpr sz ${filesize} / 0x200; |
| setexpr sz ${sz} + 1; |
| if mmc write ${loadaddr} 0x2 ${sz}; then |
| echo Flashing of U-boot SPL succeed; |
| else echo Flashing of U-boot SPL failed; |
| fi; |
| fi; |
| download_uboot_img=tftpboot ${loadaddr} ${board_name}-u-boot.img |
| flash_uboot_img= |
| if mmc dev 0 1; then |
| setexpr sz ${filesize} / 0x200; |
| setexpr sz ${sz} + 1; |
| if mmc write ${loadaddr} 0x8a ${sz}; then |
| echo Flashing of U-boot image succeed; |
| else echo Flashing of U-boot image failed; |
| fi; |
| fi; |
| update_uboot=run download_uboot_spl flash_uboot_spl |
| download_uboot_img flash_uboot_img |
| download_kernel=tftpboot ${loadaddr} ${kernelimg} |
| flash_kernel= |
| if ext4write mmc ${mmcdev}:${mmcpart} ${loadaddr} /boot/${kernelimg} ${filesize}; then |
| echo kernel update succeed; |
| else echo kernel update failed; |
| fi; |
| update_kernel=run download_kernel flash_kernel |
| download_dtb=tftpboot ${fdt_addr} imx6ul-${fdt_name}.dtb |
| flash_dtb= |
| if ext4write mmc ${mmcdev}:${mmcpart} ${fdt_addr} /boot/imx6ul-${fdt_name}.dtb ${filesize}; then |
| echo dtb update succeed; |
| else echo dtb update in failed; |
| fi; |
| update_dtb=run download_dtb flash_dtb |
| download_rootfs=tftpboot ${loadaddr} ${board_name}-rootfs.ext4 |
| flash_rootfs= |
| if mmc dev 0 0; then |
| setexpr nbblocks ${filesize} / 0x200; |
| setexpr nbblocks ${nbblocks} + 1; |
| if mmc write ${loadaddr} 0x40800 ${nbblocks}; then |
| echo Flashing of rootfs image succeed; |
| else echo Flashing of rootfs image failed; |
| fi; |
| fi; |
| update_rootfs=run download_rootfs flash_rootfs |
| flash_failsafe= |
| if mmc dev 0 0; then |
| setexpr nbblocks ${filesize} / 0x200; |
| setexpr nbblocks ${nbblocks} + 1; |
| if mmc write ${loadaddr} 0x800 ${nbblocks}; then |
| echo Flashing of rootfs image in failsafe partition succeed; |
| else echo Flashing of rootfs image in failsafe partition failed; |
| fi; |
| fi; |
| update_failsafe=run download_rootfs flash_failsafe |
| download_userdata=tftpboot ${loadaddr} ${board_name}-user_data.ext4 |
| flash_userdata= |
| if mmc dev 0 0; then |
| setexpr nbblocks ${filesize} / 0x200; |
| setexpr nbblocks ${nbblocks} + 1; |
| if mmc write ${loadaddr} 0 ${nbblocks}; then |
| echo Flashing of user_data image succeed; |
| else echo Flashing of user_data image failed; |
| fi; |
| fi; |
| update_userdata=run download_userdata flash_userdata; mmc rescan |
| erase_userdata= |
| if mmc dev 0 0; then |
| echo Erasing eMMC User Data partition, no way out...; |
| mw ${loadaddr} 0 0x200000; |
| mmc write ${loadaddr} 0 0x1000; |
| mmc write ${loadaddr} 0x800 0x1000; |
| mmc write ${loadaddr} 0x40800 0x1000; |
| mmc write ${loadaddr} 0x440800 0x1000; |
| fi; |
| mmc rescan |
| update_all=run update_rootfs update_uboot |
| initargs=setenv bootargs console=${consoledev},${baudrate} ${extrabootargs} |
| addipargs=setenv bootargs ${bootargs} |
| ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:eth0:off |
| addmmcargs=setenv bootargs ${bootargs} root=${mmcroot} |
| rootfstype=${mmcrootfstype} |
| emmcboot=run initargs; run addmmcargs; |
| load mmc ${mmcdev}:${mmcpart} ${loadaddr} /boot/${kernelimg} && |
| load mmc ${mmcdev}:${mmcpart} ${fdt_addr} /boot/imx6ul-${fdt_name}.dtb && |
| bootz ${loadaddr} - ${fdt_addr}; |
| emmcsafeboot=setenv mmcpart 1; setenv mmcroot /dev/mmcblk0p1 ro; run emmcboot; |
| addnfsargs=setenv bootargs ${bootargs} root=/dev/nfs rw |
| nfsroot=${serverip}:${rootpath} |
| nfsboot=run initargs; run addnfsargs addipargs; |
| nfs ${loadaddr} ${serverip}:${rootpath}/boot/${kernelimg} && |
| nfs ${fdt_addr} ${serverip}:${rootpath}/boot/imx6ul-${fdt_name}.dtb && |
| bootz ${loadaddr} - ${fdt_addr}; |