| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2003 |
| * Steven Scholz, imc Measurement & Control, steven.scholz@imc-berlin.de |
| * |
| * (C) Copyright 2002 |
| * Rich Ireland, Enterasys Networks, rireland@enterasys.com. |
| */ |
| |
| #include <common.h> /* core U-Boot definitions */ |
| #include <console.h> |
| #include <ACEX1K.h> /* ACEX device family */ |
| #include <linux/delay.h> |
| |
| /* Define FPGA_DEBUG to get debug printf's */ |
| #ifdef FPGA_DEBUG |
| #define PRINTF(fmt,args...) printf (fmt ,##args) |
| #else |
| #define PRINTF(fmt,args...) |
| #endif |
| |
| /* Note: The assumption is that we cannot possibly run fast enough to |
| * overrun the device (the Slave Parallel mode can free run at 50MHz). |
| * If there is a need to operate slower, define CONFIG_FPGA_DELAY in |
| * the board config file to slow things down. |
| */ |
| #ifndef CONFIG_FPGA_DELAY |
| #define CONFIG_FPGA_DELAY() |
| #endif |
| |
| #ifndef CONFIG_SYS_FPGA_WAIT |
| #define CONFIG_SYS_FPGA_WAIT CONFIG_SYS_HZ/10 /* 100 ms */ |
| #endif |
| |
| static int ACEX1K_ps_load(Altera_desc *desc, const void *buf, size_t bsize); |
| static int ACEX1K_ps_dump(Altera_desc *desc, const void *buf, size_t bsize); |
| /* static int ACEX1K_ps_info(Altera_desc *desc); */ |
| |
| /* ------------------------------------------------------------------------- */ |
| /* ACEX1K Generic Implementation */ |
| int ACEX1K_load(Altera_desc *desc, const void *buf, size_t bsize) |
| { |
| int ret_val = FPGA_FAIL; |
| |
| switch (desc->iface) { |
| case passive_serial: |
| PRINTF ("%s: Launching Passive Serial Loader\n", __FUNCTION__); |
| ret_val = ACEX1K_ps_load (desc, buf, bsize); |
| break; |
| |
| /* Add new interface types here */ |
| |
| default: |
| printf ("%s: Unsupported interface type, %d\n", |
| __FUNCTION__, desc->iface); |
| } |
| |
| return ret_val; |
| } |
| |
| int ACEX1K_dump(Altera_desc *desc, const void *buf, size_t bsize) |
| { |
| int ret_val = FPGA_FAIL; |
| |
| switch (desc->iface) { |
| case passive_serial: |
| PRINTF ("%s: Launching Passive Serial Dump\n", __FUNCTION__); |
| ret_val = ACEX1K_ps_dump (desc, buf, bsize); |
| break; |
| |
| /* Add new interface types here */ |
| |
| default: |
| printf ("%s: Unsupported interface type, %d\n", |
| __FUNCTION__, desc->iface); |
| } |
| |
| return ret_val; |
| } |
| |
| int ACEX1K_info( Altera_desc *desc ) |
| { |
| return FPGA_SUCCESS; |
| } |
| |
| |
| /* ------------------------------------------------------------------------- */ |
| /* ACEX1K Passive Serial Generic Implementation */ |
| |
| static int ACEX1K_ps_load(Altera_desc *desc, const void *buf, size_t bsize) |
| { |
| int ret_val = FPGA_FAIL; /* assume the worst */ |
| Altera_ACEX1K_Passive_Serial_fns *fn = desc->iface_fns; |
| int i; |
| |
| PRINTF ("%s: start with interface functions @ 0x%p\n", |
| __FUNCTION__, fn); |
| |
| if (fn) { |
| size_t bytecount = 0; |
| unsigned char *data = (unsigned char *) buf; |
| int cookie = desc->cookie; /* make a local copy */ |
| unsigned long ts; /* timestamp */ |
| |
| PRINTF ("%s: Function Table:\n" |
| "ptr:\t0x%p\n" |
| "struct: 0x%p\n" |
| "config:\t0x%p\n" |
| "status:\t0x%p\n" |
| "clk:\t0x%p\n" |
| "data:\t0x%p\n" |
| "done:\t0x%p\n\n", |
| __FUNCTION__, &fn, fn, fn->config, fn->status, |
| fn->clk, fn->data, fn->done); |
| #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK |
| printf ("Loading FPGA Device %d...", cookie); |
| #endif |
| |
| /* |
| * Run the pre configuration function if there is one. |
| */ |
| if (*fn->pre) { |
| (*fn->pre) (cookie); |
| } |
| |
| /* Establish the initial state */ |
| (*fn->config) (true, true, cookie); /* Assert nCONFIG */ |
| |
| udelay(2); /* T_cfg > 2us */ |
| |
| /* nSTATUS should be asserted now */ |
| (*fn->done) (cookie); |
| if ( !(*fn->status) (cookie) ) { |
| puts ("** nSTATUS is not asserted.\n"); |
| (*fn->abort) (cookie); |
| return FPGA_FAIL; |
| } |
| |
| (*fn->config) (false, true, cookie); /* Deassert nCONFIG */ |
| udelay(2); /* T_cf2st1 < 4us */ |
| |
| /* Wait for nSTATUS to be released (i.e. deasserted) */ |
| ts = get_timer (0); /* get current time */ |
| do { |
| CONFIG_FPGA_DELAY (); |
| if (get_timer (ts) > CONFIG_SYS_FPGA_WAIT) { /* check the time */ |
| puts ("** Timeout waiting for STATUS to go high.\n"); |
| (*fn->abort) (cookie); |
| return FPGA_FAIL; |
| } |
| (*fn->done) (cookie); |
| } while ((*fn->status) (cookie)); |
| |
| /* Get ready for the burn */ |
| CONFIG_FPGA_DELAY (); |
| |
| /* Load the data */ |
| while (bytecount < bsize) { |
| unsigned char val=0; |
| #ifdef CONFIG_SYS_FPGA_CHECK_CTRLC |
| if (ctrlc ()) { |
| (*fn->abort) (cookie); |
| return FPGA_FAIL; |
| } |
| #endif |
| /* Altera detects an error if INIT goes low (active) |
| while DONE is low (inactive) */ |
| #if 0 /* not yet implemented */ |
| if ((*fn->done) (cookie) == 0 && (*fn->init) (cookie)) { |
| puts ("** CRC error during FPGA load.\n"); |
| (*fn->abort) (cookie); |
| return (FPGA_FAIL); |
| } |
| #endif |
| val = data [bytecount ++ ]; |
| i = 8; |
| do { |
| /* Deassert the clock */ |
| (*fn->clk) (false, true, cookie); |
| CONFIG_FPGA_DELAY (); |
| /* Write data */ |
| (*fn->data) ((val & 0x01), true, cookie); |
| CONFIG_FPGA_DELAY (); |
| /* Assert the clock */ |
| (*fn->clk) (true, true, cookie); |
| CONFIG_FPGA_DELAY (); |
| val >>= 1; |
| i --; |
| } while (i > 0); |
| |
| #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK |
| if (bytecount % (bsize / 40) == 0) |
| putc ('.'); /* let them know we are alive */ |
| #endif |
| } |
| |
| CONFIG_FPGA_DELAY (); |
| |
| #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK |
| putc (' '); /* terminate the dotted line */ |
| #endif |
| |
| /* |
| * Checking FPGA's CONF_DONE signal - correctly booted ? |
| */ |
| |
| if ( ! (*fn->done) (cookie) ) { |
| puts ("** Booting failed! CONF_DONE is still deasserted.\n"); |
| (*fn->abort) (cookie); |
| return (FPGA_FAIL); |
| } |
| |
| /* |
| * "DCLK must be clocked an additional 10 times fpr ACEX 1K..." |
| */ |
| |
| for (i = 0; i < 12; i++) { |
| CONFIG_FPGA_DELAY (); |
| (*fn->clk) (true, true, cookie); /* Assert the clock pin */ |
| CONFIG_FPGA_DELAY (); |
| (*fn->clk) (false, true, cookie); /* Deassert the clock pin */ |
| } |
| |
| ret_val = FPGA_SUCCESS; |
| |
| #ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK |
| if (ret_val == FPGA_SUCCESS) { |
| puts ("Done.\n"); |
| } |
| else { |
| puts ("Fail.\n"); |
| } |
| #endif |
| (*fn->post) (cookie); |
| |
| } else { |
| printf ("%s: NULL Interface function table!\n", __FUNCTION__); |
| } |
| |
| return ret_val; |
| } |
| |
| static int ACEX1K_ps_dump(Altera_desc *desc, const void *buf, size_t bsize) |
| { |
| /* Readback is only available through the Slave Parallel and */ |
| /* boundary-scan interfaces. */ |
| printf ("%s: Passive Serial Dumping is unavailable\n", |
| __FUNCTION__); |
| return FPGA_FAIL; |
| } |