| # |
| # GPIO infrastructure and drivers |
| # |
| |
| menu "GPIO Support" |
| |
| config DM_GPIO |
| bool "Enable Driver Model for GPIO drivers" |
| depends on DM |
| help |
| Enable driver model for GPIO access. The standard GPIO |
| interface (gpio_get_value(), etc.) is then implemented by |
| the GPIO uclass. Drivers provide methods to query the |
| particular GPIOs that they provide. The uclass interface |
| is defined in include/asm-generic/gpio.h. |
| |
| config SPL_DM_GPIO |
| bool "Enable Driver Model for GPIO drivers in SPL" |
| depends on DM_GPIO && SPL_DM && SPL_GPIO_SUPPORT |
| default y |
| help |
| Enable driver model for GPIO access in SPL. The standard GPIO |
| interface (gpio_get_value(), etc.) is then implemented by |
| the GPIO uclass. Drivers provide methods to query the |
| particular GPIOs that they provide. The uclass interface |
| is defined in include/asm-generic/gpio.h. |
| |
| config TPL_DM_GPIO |
| bool "Enable Driver Model for GPIO drivers in TPL" |
| depends on DM_GPIO && TPL_DM && TPL_GPIO_SUPPORT |
| default y |
| help |
| Enable driver model for GPIO access in TPL. The standard GPIO |
| interface (gpio_get_value(), etc.) is then implemented by |
| the GPIO uclass. Drivers provide methods to query the |
| particular GPIOs that they provide. The uclass interface |
| is defined in include/asm-generic/gpio.h. |
| |
| config GPIO_HOG |
| bool "Enable GPIO hog support" |
| depends on DM_GPIO |
| default n |
| help |
| Enable gpio hog support |
| The GPIO chip may contain GPIO hog definitions. GPIO hogging |
| is a mechanism providing automatic GPIO request and config- |
| uration as part of the gpio-controller's driver probe function. |
| |
| config DM_GPIO_LOOKUP_LABEL |
| bool "Enable searching for gpio labelnames" |
| depends on DM_GPIO |
| help |
| This option enables searching for gpio names in |
| the defined gpio labels, if the search for the |
| gpio bank name failed. This makes sense if you use |
| different gpios on different hardware versions |
| for the same functionality in board code. |
| |
| config SPL_DM_GPIO_LOOKUP_LABEL |
| bool "Enable searching for gpio labelnames" |
| depends on DM_GPIO && SPL_DM && SPL_GPIO_SUPPORT |
| help |
| This option enables searching for gpio names in |
| the defined gpio labels, if the search for the |
| gpio bank name failed. This makes sense if you use |
| different gpios on different hardware versions |
| for the same functionality in board code. |
| |
| config ALTERA_PIO |
| bool "Altera PIO driver" |
| depends on DM_GPIO |
| help |
| Select this to enable PIO for Altera devices. Please find |
| details on the "Embedded Peripherals IP User Guide" of Altera. |
| |
| config BCM6345_GPIO |
| bool "BCM6345 GPIO driver" |
| depends on DM_GPIO && (ARCH_BMIPS || ARCH_BCM68360 || \ |
| ARCH_BCM6858 || ARCH_BCM63158) |
| help |
| This driver supports the GPIO banks on BCM6345 SoCs. |
| |
| config CORTINA_GPIO |
| bool "Cortina-Access GPIO driver" |
| depends on DM_GPIO && CORTINA_PLATFORM |
| help |
| Enable support for the GPIO controller in Cortina CAxxxx SoCs. |
| This driver supports all CPU ISA variants supported by Cortina |
| Access CAxxxx SoCs. |
| |
| config DWAPB_GPIO |
| bool "DWAPB GPIO driver" |
| depends on DM && DM_GPIO |
| default n |
| help |
| Support for the Designware APB GPIO driver. |
| |
| config AT91_GPIO |
| bool "AT91 PIO GPIO driver" |
| default n |
| help |
| Say yes here to select AT91 PIO GPIO driver. AT91 PIO |
| controller manages up to 32 fully programmable input/output |
| lines. Each I/O line may be dedicated as a general-purpose |
| I/O or be assigned to a function of an embedded peripheral. |
| The assignment to a function of an embedded peripheral is |
| the responsibility of AT91 Pinctrl driver. This driver is |
| responsible for the general-purpose I/O. |
| |
| config ATMEL_PIO4 |
| bool "ATMEL PIO4 driver" |
| depends on DM_GPIO |
| default n |
| help |
| Say yes here to support the Atmel PIO4 driver. |
| The PIO4 is new version of Atmel PIO controller, which manages |
| up to 128 fully programmable input/output lines. Each I/O line |
| may be dedicated as a general purpose I/O or be assigned to |
| a function of an embedded peripheral. |
| |
| config DA8XX_GPIO |
| bool "DA8xx GPIO Driver" |
| help |
| This driver supports the DA8xx GPIO controller |
| |
| config INTEL_BROADWELL_GPIO |
| bool "Intel Broadwell GPIO driver" |
| depends on DM |
| help |
| This driver supports Broadwell U devices which have an expanded |
| GPIO feature set. The difference is large enough to merit a separate |
| driver from the common Intel ICH6 driver. It supports a total of |
| 95 GPIOs which can be configured from the device tree. |
| |
| config INTEL_GPIO |
| bool "Intel generic GPIO driver" |
| depends on DM_GPIO |
| help |
| Say yes here to select Intel generic GPIO driver. This controller |
| supports recent chips (e.g. Apollo Lake). It permits basic GPIO |
| control including setting pins to input/output. It makes use of its |
| parent pinctrl driver to actually effect changes. |
| |
| config INTEL_ICH6_GPIO |
| bool "Intel ICH6 compatible legacy GPIO driver" |
| depends on DM_GPIO |
| help |
| Say yes here to select Intel ICH6 compatible legacy GPIO driver. |
| |
| config IMX_RGPIO2P |
| bool "i.MX7ULP RGPIO2P driver" |
| depends on DM |
| default n |
| help |
| This driver supports i.MX7ULP Rapid GPIO2P controller. |
| |
| config IPROC_GPIO |
| bool "Broadcom iProc GPIO driver(without pinconf)" |
| default n |
| help |
| The Broadcom iProc based SoCs- Cygnus, NS2, NS3, NSP and Stingray, |
| use the same GPIO Controller IP hence this driver could be used |
| for all. |
| |
| The Broadcom iProc based SoCs have multiple GPIO controllers and only |
| the always-ON GPIO controller (CRMU/AON) is supported by this driver. |
| |
| config HSDK_CREG_GPIO |
| bool "HSDK CREG GPIO griver" |
| depends on DM_GPIO |
| default n |
| help |
| This driver supports CREG GPIOs on Synopsys HSDK SOC. |
| |
| config LPC32XX_GPIO |
| bool "LPC32XX GPIO driver" |
| depends on DM |
| default n |
| help |
| Support for the LPC32XX GPIO driver. |
| |
| config MSCC_SGPIO |
| bool "Microsemi Serial GPIO driver" |
| depends on DM_GPIO && SOC_VCOREIII |
| help |
| Support for the VCoreIII SoC serial GPIO device. By using a |
| serial interface, the SIO controller significantly extends |
| the number of available GPIOs with a minimum number of |
| additional pins on the device. The primary purpose of the |
| SIO controller is to connect control signals from SFP |
| modules and to act as an LED controller. |
| |
| config MSM_GPIO |
| bool "Qualcomm GPIO driver" |
| depends on DM_GPIO |
| default n |
| help |
| Support GPIO controllers on Qualcomm Snapdragon family of SoCs. |
| This controller have single bank (default name "soc"), every |
| gpio has it's own set of registers. |
| Only simple GPIO operations are supported (get/set, change of |
| direction and checking pin function). |
| Supported devices: |
| - APQ8016 |
| - MSM8916 |
| |
| config MXC_GPIO |
| bool "Freescale/NXP MXC GPIO driver" |
| help |
| Support GPIO controllers on various i.MX platforms |
| |
| config MXS_GPIO |
| bool "Freescale/NXP MXS GPIO driver" |
| help |
| Support GPIO controllers on i.MX23 and i.MX28 platforms |
| |
| config OMAP_GPIO |
| bool "TI OMAP GPIO driver" |
| depends on ARCH_OMAP2PLUS |
| default y |
| help |
| Support GPIO controllers on the TI OMAP3/4/5 and related (such as |
| AM335x/AM43xx/AM57xx/DRA7xx/etc) families of SoCs. |
| |
| config CMD_PCA953X |
| bool "Enable the pca953x command" |
| help |
| Deprecated: This should be converted to driver model. |
| |
| This command provides access to a pca953x GPIO device using the |
| legacy GPIO interface. Several subcommands are provided which mirror |
| the standard 'gpio' command. It should use that instead. |
| |
| config PM8916_GPIO |
| bool "Qualcomm PM8916 PMIC GPIO/keypad driver" |
| depends on DM_GPIO && PMIC_PM8916 |
| help |
| Support for GPIO pins and power/reset buttons found on |
| Qualcomm PM8916 PMIC. |
| Default name for GPIO bank is "pm8916". |
| Power and reset buttons are placed in "pm8916_key" bank and |
| have gpio numbers 0 and 1 respectively. |
| |
| config PCF8575_GPIO |
| bool "PCF8575 I2C GPIO Expander driver" |
| depends on DM_GPIO && DM_I2C |
| help |
| Support for PCF8575 I2C 16-bit GPIO expander. Most of these |
| chips are from NXP and TI. |
| |
| config RCAR_GPIO |
| bool "Renesas RCar GPIO driver" |
| depends on DM_GPIO && ARCH_RMOBILE |
| help |
| This driver supports the GPIO banks on Renesas RCar SoCs. |
| |
| config RZA1_GPIO |
| bool "Renesas RZ/A1 GPIO driver" |
| depends on DM_GPIO && RZA1 |
| help |
| This driver supports the GPIO banks on Renesas RZ/A1 R7S72100 SoCs. |
| |
| config ROCKCHIP_GPIO |
| bool "Rockchip GPIO driver" |
| depends on DM_GPIO |
| help |
| Support GPIO access on Rockchip SoCs. The GPIOs are arranged into |
| a number of banks (different for each SoC type) each with 32 GPIOs. |
| The GPIOs for a device are defined in the device tree with one node |
| for each bank. |
| |
| config SANDBOX_GPIO |
| bool "Enable sandbox GPIO driver" |
| depends on SANDBOX && DM && DM_GPIO |
| help |
| This driver supports some simulated GPIOs which can be adjusted |
| using 'back door' functions like sandbox_gpio_set_value(). Then the |
| GPIOs can be inspected through the normal get_get_value() |
| interface. The purpose of this is to allow GPIOs to be used as |
| normal in sandbox, perhaps with test code actually driving the |
| behaviour of those GPIOs. |
| |
| config SANDBOX_GPIO_COUNT |
| int "Number of sandbox GPIOs" |
| depends on SANDBOX_GPIO |
| default 128 |
| help |
| The sandbox driver can support any number of GPIOs. Generally these |
| are specified using the device tree. But you can also have a number |
| of 'anonymous' GPIOs that do not belong to any device or bank. |
| Select a suitable value depending on your needs. |
| |
| config SUNXI_GPIO |
| bool "Allwinner GPIO driver" |
| depends on ARCH_SUNXI |
| help |
| Support the GPIO device in Allwinner SoCs. |
| |
| config XILINX_GPIO |
| bool "Xilinx GPIO driver" |
| depends on DM_GPIO |
| help |
| This config enable the Xilinx GPIO driver for Microblaze. |
| |
| config CMD_TCA642X |
| bool "tca642x - Command to access tca642x state" |
| help |
| DEPRECATED - This needs conversion to driver model |
| |
| This provides a way to looking at the pin state of this device. |
| This mirrors the 'gpio' command and that should be used in preference |
| to custom code. |
| |
| config TEGRA_GPIO |
| bool "Tegra20..210 GPIO driver" |
| depends on DM_GPIO |
| help |
| Support for the GPIO controller contained in NVIDIA Tegra20 through |
| Tegra210. |
| |
| config TEGRA186_GPIO |
| bool "Tegra186 GPIO driver" |
| depends on DM_GPIO |
| help |
| Support for the GPIO controller contained in NVIDIA Tegra186. This |
| covers both the "main" and "AON" controller instances, even though |
| they have slightly different register layout. |
| |
| config GPIO_UNIPHIER |
| bool "UniPhier GPIO" |
| depends on ARCH_UNIPHIER |
| help |
| Say yes here to support UniPhier GPIOs. |
| |
| config VYBRID_GPIO |
| bool "Vybrid GPIO driver" |
| depends on DM |
| default n |
| help |
| Say yes here to support Vybrid vf610 GPIOs. |
| |
| config PIC32_GPIO |
| bool "Microchip PIC32 GPIO driver" |
| depends on DM_GPIO && MACH_PIC32 |
| default y |
| help |
| Say yes here to support Microchip PIC32 GPIOs. |
| |
| config OCTEON_GPIO |
| bool "Octeon II/III/TX/TX2 GPIO driver" |
| depends on DM_GPIO && DM_PCI && (ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2) |
| default y |
| help |
| Add support for the Marvell Octeon GPIO driver. This is used with |
| various Octeon parts such as Octeon II/III and OcteonTX/TX2. |
| Octeon II/III has 32 GPIOs (count defined via DT) and OcteonTX/TX2 |
| has 64 GPIOs (count defined via internal register). |
| |
| config STM32_GPIO |
| bool "ST STM32 GPIO driver" |
| depends on DM_GPIO && (ARCH_STM32 || ARCH_STM32MP) |
| default y |
| help |
| Device model driver support for STM32 GPIO controller. It should be |
| usable on many stm32 families like stm32f4/f7/h7 and stm32mp1. |
| Tested on STM32F7. |
| |
| config SIFIVE_GPIO |
| bool "SiFive GPIO driver" |
| depends on DM_GPIO |
| help |
| Device model driver for GPIO controller present in SiFive FU540 SoC. This |
| driver enables GPIO interface on HiFive Unleashed A00 board. |
| |
| config MVEBU_GPIO |
| bool "Marvell MVEBU GPIO driver" |
| depends on DM_GPIO && (ARCH_MVEBU || ARCH_KIRKWOOD) |
| default y |
| help |
| Say yes here to support Marvell MVEBU (Armada XP/38x) GPIOs. |
| |
| config ZYNQ_GPIO |
| bool "Zynq GPIO driver" |
| depends on DM_GPIO |
| default y if ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL |
| help |
| Supports GPIO access on Zynq SoC. |
| |
| config DM_74X164 |
| bool "74x164 serial-in/parallel-out 8-bits shift register" |
| depends on DM_GPIO |
| help |
| Driver for 74x164 compatible serial-in/parallel-out 8-outputs |
| shift registers, such as 74lv165, 74hc595. |
| This driver can be used to provide access to more gpio outputs. |
| |
| config DM_PCA953X |
| bool "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports" |
| depends on DM_GPIO && DM_I2C |
| help |
| Say yes here to provide access to several register-oriented |
| SMBus I/O expanders, made mostly by NXP or TI. Compatible |
| models include: |
| |
| 4 bits: pca9536, pca9537 |
| |
| 8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554, |
| pca9556, pca9557, pca9574, tca6408, xra1202 |
| |
| 16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575, |
| tca6416 |
| |
| 24 bits: tca6424 |
| |
| 40 bits: pca9505, pca9698 |
| |
| Now, max 24 bits chips and PCA953X compatible chips are |
| supported |
| |
| config SPL_DM_PCA953X |
| bool "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports in SPL" |
| depends on DM_GPIO |
| help |
| Say yes here to provide access to several register-oriented |
| SMBus I/O expanders, made mostly by NXP or TI. Compatible |
| models include: |
| |
| 4 bits: pca9536, pca9537 |
| |
| 8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554, |
| pca9556, pca9557, pca9574, tca6408, xra1202 |
| |
| 16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575, |
| tca6416 |
| |
| 24 bits: tca6424 |
| |
| 40 bits: pca9505, pca9698 |
| |
| Now, max 24 bits chips and PCA953X compatible chips are |
| supported |
| |
| config MPC8XXX_GPIO |
| bool "Freescale MPC8XXX GPIO driver" |
| depends on DM_GPIO |
| help |
| This driver supports the built-in GPIO controller of MPC8XXX CPUs. |
| Each GPIO bank is identified by its own entry in the device tree, |
| i.e. |
| |
| gpio-controller@fc00 { |
| #gpio-cells = <2>; |
| compatible = "fsl,pq3-gpio"; |
| reg = <0xfc00 0x100> |
| } |
| |
| By default, each bank is assumed to have 32 GPIOs, but the ngpios |
| setting is honored, so the number of GPIOs for each bank is |
| configurable to match the actual GPIO count of the SoC (e.g. the |
| 32/32/23 banks of the P1022 SoC). |
| |
| Aside from the standard functions of input/output mode, and output |
| value setting, the open-drain feature, which can configure individual |
| GPIOs to work as open-drain outputs, is supported. |
| |
| config MPC83XX_SPISEL_BOOT |
| bool "Freescale MPC83XX SPISEL_BOOT driver" |
| depends on DM_GPIO && ARCH_MPC830X |
| help |
| GPIO driver to set/clear dedicated SPISEL_BOOT output on MPC83XX. |
| |
| This pin is typically used as spi chip select to a spi nor flash. |
| |
| config MT7620_GPIO |
| bool "MediaTek MT7620 GPIO driver" |
| depends on DM_GPIO && SOC_MT7620 |
| default y |
| help |
| Device model driver for GPIO controller present in MediaTek MT7620 |
| and earlier SoCs. |
| |
| config MT7621_GPIO |
| bool "MediaTek MT7621 GPIO driver" |
| depends on DM_GPIO && SOC_MT7628 |
| default y |
| help |
| Say yes here to support MediaTek MT7621 compatible GPIOs. |
| |
| config NX_GPIO |
| bool "Nexell GPIO driver" |
| depends on DM_GPIO |
| help |
| Support GPIO access on Nexell SoCs. The GPIOs are arranged into |
| a number of banks (different for each SoC type) each with 32 GPIOs. |
| The GPIOs for a device are defined in the device tree with one node |
| for each bank. |
| |
| config NOMADIK_GPIO |
| bool "Nomadik GPIO driver" |
| depends on DM_GPIO |
| help |
| Support GPIO access on ST-Ericsson Ux500 SoCs. The GPIOs are arranged |
| into a number of banks each with 32 GPIOs. The GPIOs for a device are |
| defined in the device tree with one node for each bank. |
| |
| endmenu |