| /* |
| * Overview: |
| * Platform independend driver for NDFC (NanD Flash Controller) |
| * integrated into EP440 cores |
| * |
| * (C) Copyright 2006-2007 |
| * Stefan Roese, DENX Software Engineering, sr@denx.de. |
| * |
| * Based on original work by |
| * Thomas Gleixner |
| * Copyright 2006 IBM |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| |
| #if defined(CONFIG_CMD_NAND) && !defined(CFG_NAND_LEGACY) && \ |
| (defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ |
| defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ |
| defined(CONFIG_405EZ) || defined(CONFIG_405EX)) |
| |
| #include <nand.h> |
| #include <linux/mtd/ndfc.h> |
| #include <linux/mtd/nand_ecc.h> |
| #include <asm/processor.h> |
| #include <asm/io.h> |
| #include <ppc4xx.h> |
| |
| static u8 hwctl = 0; |
| |
| static void ndfc_hwcontrol(struct mtd_info *mtdinfo, int cmd) |
| { |
| switch (cmd) { |
| case NAND_CTL_SETCLE: |
| hwctl |= 0x1; |
| break; |
| |
| case NAND_CTL_CLRCLE: |
| hwctl &= ~0x1; |
| break; |
| |
| case NAND_CTL_SETALE: |
| hwctl |= 0x2; |
| break; |
| |
| case NAND_CTL_CLRALE: |
| hwctl &= ~0x2; |
| break; |
| } |
| } |
| |
| static void ndfc_write_byte(struct mtd_info *mtdinfo, u_char byte) |
| { |
| struct nand_chip *this = mtdinfo->priv; |
| ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc; |
| |
| if (hwctl & 0x1) |
| out_8((u8 *)(base + NDFC_CMD), byte); |
| else if (hwctl & 0x2) |
| out_8((u8 *)(base + NDFC_ALE), byte); |
| else |
| out_8((u8 *)(base + NDFC_DATA), byte); |
| } |
| |
| static u_char ndfc_read_byte(struct mtd_info *mtdinfo) |
| { |
| struct nand_chip *this = mtdinfo->priv; |
| ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc; |
| |
| return (in_8((u8 *)(base + NDFC_DATA))); |
| } |
| |
| static int ndfc_dev_ready(struct mtd_info *mtdinfo) |
| { |
| struct nand_chip *this = mtdinfo->priv; |
| ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc; |
| |
| while (!(in_be32((u32 *)(base + NDFC_STAT)) & NDFC_STAT_IS_READY)) |
| ; |
| |
| return 1; |
| } |
| |
| static void ndfc_enable_hwecc(struct mtd_info *mtdinfo, int mode) |
| { |
| struct nand_chip *this = mtdinfo->priv; |
| ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc; |
| u32 ccr; |
| |
| ccr = in_be32((u32 *)(base + NDFC_CCR)); |
| ccr |= NDFC_CCR_RESET_ECC; |
| out_be32((u32 *)(base + NDFC_CCR), ccr); |
| } |
| |
| static int ndfc_calculate_ecc(struct mtd_info *mtdinfo, |
| const u_char *dat, u_char *ecc_code) |
| { |
| struct nand_chip *this = mtdinfo->priv; |
| ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc; |
| u32 ecc; |
| u8 *p = (u8 *)&ecc; |
| |
| ecc = in_be32((u32 *)(base + NDFC_ECC)); |
| |
| /* The NDFC uses Smart Media (SMC) bytes order |
| */ |
| ecc_code[0] = p[2]; |
| ecc_code[1] = p[1]; |
| ecc_code[2] = p[3]; |
| |
| return 0; |
| } |
| |
| /* |
| * Speedups for buffer read/write/verify |
| * |
| * NDFC allows 32bit read/write of data. So we can speed up the buffer |
| * functions. No further checking, as nand_base will always read/write |
| * page aligned. |
| */ |
| static void ndfc_read_buf(struct mtd_info *mtdinfo, uint8_t *buf, int len) |
| { |
| struct nand_chip *this = mtdinfo->priv; |
| ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc; |
| uint32_t *p = (uint32_t *) buf; |
| |
| for (;len > 0; len -= 4) |
| *p++ = in_be32((u32 *)(base + NDFC_DATA)); |
| } |
| |
| #ifndef CONFIG_NAND_SPL |
| /* |
| * Don't use these speedup functions in NAND boot image, since the image |
| * has to fit into 4kByte. |
| */ |
| static void ndfc_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len) |
| { |
| struct nand_chip *this = mtdinfo->priv; |
| ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc; |
| uint32_t *p = (uint32_t *) buf; |
| |
| for (; len > 0; len -= 4) |
| out_be32((u32 *)(base + NDFC_DATA), *p++); |
| } |
| |
| static int ndfc_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len) |
| { |
| struct nand_chip *this = mtdinfo->priv; |
| ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc; |
| uint32_t *p = (uint32_t *) buf; |
| |
| for (; len > 0; len -= 4) |
| if (*p++ != in_be32((u32 *)(base + NDFC_DATA))) |
| return -1; |
| |
| return 0; |
| } |
| #endif /* #ifndef CONFIG_NAND_SPL */ |
| |
| void board_nand_select_device(struct nand_chip *nand, int chip) |
| { |
| /* |
| * Don't use "chip" to address the NAND device, |
| * generate the cs from the address where it is encoded. |
| */ |
| int cs = (ulong)nand->IO_ADDR_W & 0x00000003; |
| ulong base = (ulong)nand->IO_ADDR_W & 0xfffffffc; |
| |
| /* Set NandFlash Core Configuration Register */ |
| /* 1 col x 2 rows */ |
| out_be32((u32 *)(base + NDFC_CCR), 0x00000000 | (cs << 24)); |
| } |
| |
| int board_nand_init(struct nand_chip *nand) |
| { |
| int cs = (ulong)nand->IO_ADDR_W & 0x00000003; |
| ulong base = (ulong)nand->IO_ADDR_W & 0xfffffffc; |
| |
| nand->hwcontrol = ndfc_hwcontrol; |
| nand->read_byte = ndfc_read_byte; |
| nand->read_buf = ndfc_read_buf; |
| nand->write_byte = ndfc_write_byte; |
| nand->dev_ready = ndfc_dev_ready; |
| |
| nand->eccmode = NAND_ECC_HW3_256; |
| nand->enable_hwecc = ndfc_enable_hwecc; |
| nand->calculate_ecc = ndfc_calculate_ecc; |
| nand->correct_data = nand_correct_data; |
| |
| #ifndef CONFIG_NAND_SPL |
| nand->write_buf = ndfc_write_buf; |
| nand->verify_buf = ndfc_verify_buf; |
| #else |
| /* |
| * Setup EBC (CS0 only right now) |
| */ |
| mtebc(EBC0_CFG, 0xb8400000); |
| |
| mtebc(pb0cr, CFG_EBC_PB0CR); |
| mtebc(pb0ap, CFG_EBC_PB0AP); |
| #endif |
| |
| /* |
| * Select required NAND chip in NDFC |
| */ |
| board_nand_select_device(nand, cs); |
| out_be32((u32 *)(base + NDFC_BCFG0 + (cs << 2)), 0x80002222); |
| |
| return 0; |
| } |
| |
| #endif |