blob: 1b4617311c577f581d0c3eeadfd232959b812950 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2007 Michal Simek
*
* Michal SIMEK <monstr@monstr.eu>
*/
#include <common.h>
#include <fdtdec.h>
#include <init.h>
#include <log.h>
#include <time.h>
#include <asm/microblaze_timer.h>
#include <asm/microblaze_intc.h>
#include <linux/delay.h>
DECLARE_GLOBAL_DATA_PTR;
volatile int timestamp = 0;
microblaze_timer_t *tmr;
ulong get_timer (ulong base)
{
if (tmr)
return timestamp - base;
return timestamp++ - base;
}
void __udelay(unsigned long usec)
{
u32 i;
if (tmr) {
i = get_timer(0);
while ((get_timer(0) - i) < (usec / 1000))
;
}
}
#ifndef CONFIG_SPL_BUILD
static void timer_isr(void *arg)
{
timestamp++;
tmr->control = tmr->control | TIMER_INTERRUPT;
}
int timer_init (void)
{
int irq = -1;
u32 preload = 0;
u32 ret = 0;
const void *blob = gd->fdt_blob;
int node = 0;
u32 cell[2];
debug("TIMER: Initialization\n");
/* Do not init before relocation */
if (!(gd->flags & GD_FLG_RELOC))
return 0;
node = fdt_node_offset_by_compatible(blob, node,
"xlnx,xps-timer-1.00.a");
if (node != -1) {
fdt_addr_t base = fdtdec_get_addr(blob, node, "reg");
if (base == FDT_ADDR_T_NONE)
return -1;
debug("TIMER: Base addr %lx\n", base);
tmr = (microblaze_timer_t *)base;
ret = fdtdec_get_int_array(blob, node, "interrupts",
cell, ARRAY_SIZE(cell));
if (ret)
return ret;
irq = cell[0];
debug("TIMER: IRQ %x\n", irq);
preload = fdtdec_get_int(blob, node, "clock-frequency", 0);
preload /= CONFIG_SYS_HZ;
} else {
return node;
}
if (tmr && preload && irq >= 0) {
tmr->loadreg = preload;
tmr->control = TIMER_INTERRUPT | TIMER_RESET;
tmr->control = TIMER_ENABLE | TIMER_ENABLE_INTR |\
TIMER_RELOAD | TIMER_DOWN_COUNT;
timestamp = 0;
ret = install_interrupt_handler (irq, timer_isr, (void *)tmr);
if (ret)
tmr = NULL;
}
/* No problem if timer is not found/initialized */
return 0;
}
#else
int timer_init(void)
{
return 0;
}
#endif
/*
* This function is derived from PowerPC code (read timebase as long long).
* On Microblaze it just returns the timer value.
*/
unsigned long long get_ticks(void)
{
return get_timer(0);
}
/*
* This function is derived from PowerPC code (timebase clock frequency).
* On Microblaze it returns the number of timer ticks per second.
*/
ulong get_tbclk(void)
{
return CONFIG_SYS_HZ;
}