| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * JZ4780 PLL setup |
| * |
| * Copyright (c) 2013 Imagination Technologies |
| * Author: Paul Burton <paul.burton@imgtec.com> |
| */ |
| |
| #include <config.h> |
| #include <common.h> |
| #include <asm/io.h> |
| #include <linux/delay.h> |
| #include <mach/jz4780.h> |
| |
| #define CPM_CPCCR 0x00 |
| #define CPM_LCR 0x04 |
| #define CPM_RSR 0x08 |
| #define CPM_CPPCR 0x0c |
| #define CPM_CPAPCR 0x10 |
| #define CPM_CPMPCR 0x14 |
| #define CPM_CPEPCR 0x18 |
| #define CPM_CPVPCR 0x1c |
| #define CPM_CLKGR0 0x20 |
| #define CPM_OPCR 0x24 |
| #define CPM_CLKGR1 0x28 |
| #define CPM_DDCDR 0x2c |
| #define CPM_VPUCDR 0x30 |
| #define CPM_CPSPR 0x34 |
| #define CPM_CPSPPR 0x38 |
| #define CPM_USBPCR 0x3c |
| #define CPM_USBRDT 0x40 |
| #define CPM_USBVBFIL 0x44 |
| #define CPM_USBPCR1 0x48 |
| #define CPM_USBCDR 0x50 |
| #define CPM_LPCDR 0x54 |
| #define CPM_I2SCDR 0x60 |
| #define CPM_LPCDR1 0x64 |
| #define CPM_MSCCDR 0x68 |
| #define CPM_UHCCDR 0x6c |
| #define CPM_SSICDR 0x74 |
| #define CPM_CIMCDR 0x7c |
| #define CPM_PCMCDR 0x84 |
| #define CPM_GPUCDR 0x88 |
| #define CPM_HDMICDR 0x8c |
| #define CPM_I2S1CDR 0xa0 |
| #define CPM_MSCCDR1 0xa4 |
| #define CPM_MSCCDR2 0xa8 |
| #define CPM_BCHCDR 0xac |
| #define CPM_SPCR0 0xb8 |
| #define CPM_SPCR1 0xbc |
| #define CPM_CPCSR 0xd4 |
| #define CPM_PSWCST(n) ((0x4 * (n)) + 0x90) |
| |
| /* Clock control register */ |
| #define CPM_CPCCR_SEL_SRC_BIT 30 |
| #define CPM_CPCCR_SEL_SRC_MASK (0x3 << CPM_CPCCR_SEL_SRC_BIT) |
| #define CPM_SRC_SEL_STOP 0 |
| #define CPM_SRC_SEL_APLL 1 |
| #define CPM_SRC_SEL_EXCLK 2 |
| #define CPM_SRC_SEL_RTCLK 3 |
| #define CPM_CPCCR_SEL_CPLL_BIT 28 |
| #define CPM_CPCCR_SEL_CPLL_MASK (0x3 << CPM_CPCCR_SEL_CPLL_BIT) |
| #define CPM_CPCCR_SEL_H0PLL_BIT 26 |
| #define CPM_CPCCR_SEL_H0PLL_MASK (0x3 << CPM_CPCCR_SEL_H0PLL_BIT) |
| #define CPM_CPCCR_SEL_H2PLL_BIT 24 |
| #define CPM_CPCCR_SEL_H2PLL_MASK (0x3 << CPM_CPCCR_SEL_H2PLL_BIT) |
| #define CPM_PLL_SEL_STOP 0 |
| #define CPM_PLL_SEL_SRC 1 |
| #define CPM_PLL_SEL_MPLL 2 |
| #define CPM_PLL_SEL_EPLL 3 |
| #define CPM_CPCCR_CE_CPU (0x1 << 22) |
| #define CPM_CPCCR_CE_AHB0 (0x1 << 21) |
| #define CPM_CPCCR_CE_AHB2 (0x1 << 20) |
| #define CPM_CPCCR_PDIV_BIT 16 |
| #define CPM_CPCCR_PDIV_MASK (0xf << CPM_CPCCR_PDIV_BIT) |
| #define CPM_CPCCR_H2DIV_BIT 12 |
| #define CPM_CPCCR_H2DIV_MASK (0xf << CPM_CPCCR_H2DIV_BIT) |
| #define CPM_CPCCR_H0DIV_BIT 8 |
| #define CPM_CPCCR_H0DIV_MASK (0x0f << CPM_CPCCR_H0DIV_BIT) |
| #define CPM_CPCCR_L2DIV_BIT 4 |
| #define CPM_CPCCR_L2DIV_MASK (0x0f << CPM_CPCCR_L2DIV_BIT) |
| #define CPM_CPCCR_CDIV_BIT 0 |
| #define CPM_CPCCR_CDIV_MASK (0x0f << CPM_CPCCR_CDIV_BIT) |
| |
| /* Clock Status register */ |
| #define CPM_CPCSR_H2DIV_BUSY BIT(2) |
| #define CPM_CPCSR_H0DIV_BUSY BIT(1) |
| #define CPM_CPCSR_CDIV_BUSY BIT(0) |
| |
| /* PLL control register */ |
| #define CPM_CPPCR_PLLST_BIT 0 |
| #define CPM_CPPCR_PLLST_MASK (0xff << CPM_CPPCR_PLLST_BIT) |
| |
| /* XPLL control register */ |
| #define CPM_CPXPCR_XPLLM_BIT 19 |
| #define CPM_CPXPCR_XPLLM_MASK (0x1fff << CPM_CPXPCR_XPLLM_BIT) |
| #define CPM_CPXPCR_XPLLN_BIT 13 |
| #define CPM_CPXPCR_XPLLN_MASK (0x3f << CPM_CPXPCR_XPLLN_BIT) |
| #define CPM_CPXPCR_XPLLOD_BIT 9 |
| #define CPM_CPXPCR_XPLLOD_MASK (0xf << CPM_CPXPCR_XPLLOD_BIT) |
| #define CPM_CPXPCR_XLOCK BIT(6) |
| #define CPM_CPXPCR_XPLL_ON BIT(4) |
| #define CPM_CPXPCR_XF_MODE BIT(3) |
| #define CPM_CPXPCR_XPLLBP BIT(1) |
| #define CPM_CPXPCR_XPLLEN BIT(0) |
| |
| /* CPM scratch protected register */ |
| #define CPM_CPSPPR_BIT 0 |
| #define CPM_CPSPPR_MASK (0xffff << CPM_CPSPPR_BIT) |
| |
| /* USB parameter control register */ |
| #define CPM_USBPCR_USB_MODE BIT(31) /* 1: OTG, 0: UDC*/ |
| #define CPM_USBPCR_AVLD_REG BIT(30) |
| #define CPM_USBPCR_IDPULLUP_MASK_BIT 28 |
| #define CPM_USBPCR_IDPULLUP_MASK_MASK (0x02 << IDPULLUP_MASK_BIT) |
| #define CPM_USBPCR_INCR_MASK BIT(27) |
| #define CPM_USBPCR_CLK12_EN BIT(26) |
| #define CPM_USBPCR_COMMONONN BIT(25) |
| #define CPM_USBPCR_VBUSVLDEXT BIT(24) |
| #define CPM_USBPCR_VBUSVLDEXTSEL BIT(23) |
| #define CPM_USBPCR_POR BIT(22) |
| #define CPM_USBPCR_SIDDQ BIT(21) |
| #define CPM_USBPCR_OTG_DISABLE BIT(20) |
| #define CPM_USBPCR_COMPDISTUNE_BIT 17 |
| #define CPM_USBPCR_COMPDISTUNE_MASK (0x07 << COMPDISTUNE_BIT) |
| #define CPM_USBPCR_OTGTUNE_BIT 14 |
| #define CPM_USBPCR_OTGTUNE_MASK (0x07 << OTGTUNE_BIT) |
| #define CPM_USBPCR_SQRXTUNE_BIT 11 |
| #define CPM_USBPCR_SQRXTUNE_MASK (0x7x << SQRXTUNE_BIT) |
| #define CPM_USBPCR_TXFSLSTUNE_BIT 7 |
| #define CPM_USBPCR_TXFSLSTUNE_MASK (0x0f << TXFSLSTUNE_BIT) |
| #define CPM_USBPCR_TXPREEMPHTUNE BIT(6) |
| #define CPM_USBPCR_TXRISETUNE_BIT 4 |
| #define CPM_USBPCR_TXRISETUNE_MASK (0x03 << TXRISETUNE_BIT) |
| #define CPM_USBPCR_TXVREFTUNE_BIT 0 |
| #define CPM_USBPCR_TXVREFTUNE_MASK (0x0f << TXVREFTUNE_BIT) |
| |
| /* DDR memory clock divider register */ |
| #define CPM_DDRCDR_DCS_BIT 30 |
| #define CPM_DDRCDR_DCS_MASK (0x3 << CPM_DDRCDR_DCS_BIT) |
| #define CPM_DDRCDR_DCS_STOP (0x0 << CPM_DDRCDR_DCS_BIT) |
| #define CPM_DDRCDR_DCS_SRC (0x1 << CPM_DDRCDR_DCS_BIT) |
| #define CPM_DDRCDR_DCS_MPLL (0x2 << CPM_DDRCDR_DCS_BIT) |
| #define CPM_DDRCDR_CE_DDR BIT(29) |
| #define CPM_DDRCDR_DDR_BUSY BIT(28) |
| #define CPM_DDRCDR_DDR_STOP BIT(27) |
| #define CPM_DDRCDR_DDRDIV_BIT 0 |
| #define CPM_DDRCDR_DDRDIV_MASK (0xf << CPM_DDRCDR_DDRDIV_BIT) |
| |
| /* USB reset detect timer register */ |
| #define CPM_USBRDT_VBFIL_LD_EN BIT(25) |
| #define CPM_USBRDT_IDDIG_EN BIT(24) |
| #define CPM_USBRDT_IDDIG_REG BIT(23) |
| #define CPM_USBRDT_USBRDT_BIT 0 |
| #define CPM_USBRDT_USBRDT_MASK (0x7fffff << CPM_USBRDT_USBRDT_BIT) |
| |
| /* USB OTG PHY clock divider register */ |
| #define CPM_USBCDR_UCS BIT(31) |
| #define CPM_USBCDR_UPCS BIT(30) |
| #define CPM_USBCDR_CEUSB BIT(29) |
| #define CPM_USBCDR_USB_BUSY BIT(28) |
| #define CPM_USBCDR_OTGDIV_BIT 0 |
| #define CPM_USBCDR_OTGDIV_MASK (0xff << CPM_USBCDR_OTGDIV_BIT) |
| |
| /* I2S device clock divider register */ |
| #define CPM_I2SCDR_I2CS BIT(31) |
| #define CPM_I2SCDR_I2PCS BIT(30) |
| #define CPM_I2SCDR_I2SDIV_BIT 0 |
| #define CPM_I2SCDR_I2SDIV_MASK (0x1ff << CPM_I2SCDR_I2SDIV_BIT) |
| |
| /* LCD0 pix clock divider register */ |
| #define CPM_LPCDR_LPCS_BIT 30 |
| #define CPM_LPCDR_LPCS_MASK (0x3 << CPM_LPCDR_LPCS_BIT) |
| #define CPM_LPCDR_CELCD BIT(28) |
| #define CPM_LPCDR_LCD_BUSY BIT(27) |
| #define CPM_LPCDR_LCD_STOP BIT(26) |
| #define CPM_LPCDR_PIXDIV_BIT 0 |
| #define CPM_LPCDR_PIXDIV_MASK (0xff << CPM_LPCDR_PIXDIV_BIT) |
| |
| /* MSC clock divider register */ |
| #define CPM_MSCCDR_MPCS_BIT 30 |
| #define CPM_MSCCDR_MPCS_MASK (3 << CPM_MSCCDR_MPCS_BIT) |
| #define CPM_MSCCDR_MPCS_STOP (0x0 << CPM_MSCCDR_MPCS_BIT) |
| #define CPM_MSCCDR_MPCS_SRC (0x1 << CPM_MSCCDR_MPCS_BIT) |
| #define CPM_MSCCDR_MPCS_MPLL (0x2 << CPM_MSCCDR_MPCS_BIT) |
| #define CPM_MSCCDR_CE BIT(29) |
| #define CPM_MSCCDR_MSC_BUSY BIT(28) |
| #define CPM_MSCCDR_MSC_STOP BIT(27) |
| #define CPM_MSCCDR_MSC_CLK0_SEL BIT(15) |
| #define CPM_MSCCDR_MSCDIV_BIT 0 |
| #define CPM_MSCCDR_MSCDIV_MASK (0xff << CPM_MSCCDR_MSCDIV_BIT) |
| |
| /* UHC 48M clock divider register */ |
| #define CPM_UHCCDR_UHCS_BIT 30 |
| #define CPM_UHCCDR_UHCS_MASK (0x3 << CPM_UHCCDR_UHCS_BIT) |
| #define CPM_UHCCDR_UHCS_SRC (0x0 << CPM_UHCCDR_UHCS_BIT) |
| #define CPM_UHCCDR_UHCS_MPLL (0x1 << CPM_UHCCDR_UHCS_BIT) |
| #define CPM_UHCCDR_UHCS_EPLL (0x2 << CPM_UHCCDR_UHCS_BIT) |
| #define CPM_UHCCDR_UHCS_OTG (0x3 << CPM_UHCCDR_UHCS_BIT) |
| #define CPM_UHCCDR_CE_UHC BIT(29) |
| #define CPM_UHCCDR_UHC_BUSY BIT(28) |
| #define CPM_UHCCDR_UHC_STOP BIT(27) |
| #define CPM_UHCCDR_UHCDIV_BIT 0 |
| #define CPM_UHCCDR_UHCDIV_MASK (0xff << CPM_UHCCDR_UHCDIV_BIT) |
| |
| /* SSI clock divider register */ |
| #define CPM_SSICDR_SCS BIT(31) |
| #define CPM_SSICDR_SSIDIV_BIT 0 |
| #define CPM_SSICDR_SSIDIV_MASK (0x3f << CPM_SSICDR_SSIDIV_BIT) |
| |
| /* CIM MCLK clock divider register */ |
| #define CPM_CIMCDR_CIMDIV_BIT 0 |
| #define CPM_CIMCDR_CIMDIV_MASK (0xff << CPM_CIMCDR_CIMDIV_BIT) |
| |
| /* GPS clock divider register */ |
| #define CPM_GPSCDR_GPCS BIT(31) |
| #define CPM_GPSCDR_GPSDIV_BIT 0 |
| #define CPM_GSPCDR_GPSDIV_MASK (0xf << CPM_GPSCDR_GPSDIV_BIT) |
| |
| /* PCM device clock divider register */ |
| #define CPM_PCMCDR_PCMS BIT(31) |
| #define CPM_PCMCDR_PCMPCS BIT(30) |
| #define CPM_PCMCDR_PCMDIV_BIT 0 |
| #define CPM_PCMCDR_PCMDIV_MASK (0x1ff << CPM_PCMCDR_PCMDIV_BIT) |
| |
| /* GPU clock divider register */ |
| #define CPM_GPUCDR_GPCS BIT(31) |
| #define CPM_GPUCDR_GPUDIV_BIT 0 |
| #define CPM_GPUCDR_GPUDIV_MASK (0x7 << CPM_GPUCDR_GPUDIV_BIT) |
| |
| /* HDMI clock divider register */ |
| #define CPM_HDMICDR_HPCS_BIT 30 |
| #define CPM_HDMICDR_HPCS_MASK (0x3 << CPM_HDMICDR_HPCS_BIT) |
| #define CPM_HDMICDR_CEHDMI BIT(29) |
| #define CPM_HDMICDR_HDMI_BUSY BIT(28) |
| #define CPM_HDMICDR_HDMI_STOP BIT(26) |
| #define CPM_HDMICDR_HDMIDIV_BIT 0 |
| #define CPM_HDMICDR_HDMIDIV_MASK (0xff << CPM_HDMICDR_HDMIDIV_BIT) |
| |
| /* Low Power Control Register */ |
| #define CPM_LCR_PD_SCPU BIT(31) |
| #define CPM_LCR_PD_VPU BIT(30) |
| #define CPM_LCR_PD_GPU BIT(29) |
| #define CPM_LCR_PD_GPS BIT(28) |
| #define CPM_LCR_SCPUS BIT(27) |
| #define CPM_LCR_VPUS BIT(26) |
| #define CPM_LCR_GPUS BIT(25) |
| #define CPM_LCR_GPSS BIT(24) |
| #define CPM_LCR_GPU_IDLE BIT(20) |
| #define CPM_LCR_PST_BIT 8 |
| #define CPM_LCR_PST_MASK (0xfff << CPM_LCR_PST_BIT) |
| #define CPM_LCR_DOZE_DUTY_BIT 3 |
| #define CPM_LCR_DOZE_DUTY_MASK (0x1f << CPM_LCR_DOZE_DUTY_BIT) |
| #define CPM_LCR_DOZE_ON BIT(2) |
| #define CPM_LCR_LPM_BIT 0 |
| #define CPM_LCR_LPM_MASK (0x3 << CPM_LCR_LPM_BIT) |
| #define CPM_LCR_LPM_IDLE (0x0 << CPM_LCR_LPM_BIT) |
| #define CPM_LCR_LPM_SLEEP (0x1 << CPM_LCR_LPM_BIT) |
| |
| /* Clock Gate Register0 */ |
| #define CPM_CLKGR0_DDR1 BIT(31) |
| #define CPM_CLKGR0_DDR0 BIT(30) |
| #define CPM_CLKGR0_IPU BIT(29) |
| #define CPM_CLKGR0_LCD1 BIT(28) |
| #define CPM_CLKGR0_LCD BIT(27) |
| #define CPM_CLKGR0_CIM BIT(26) |
| #define CPM_CLKGR0_I2C2 BIT(25) |
| #define CPM_CLKGR0_UHC BIT(24) |
| #define CPM_CLKGR0_MAC BIT(23) |
| #define CPM_CLKGR0_GPS BIT(22) |
| #define CPM_CLKGR0_PDMAC BIT(21) |
| #define CPM_CLKGR0_SSI2 BIT(20) |
| #define CPM_CLKGR0_SSI1 BIT(19) |
| #define CPM_CLKGR0_UART3 BIT(18) |
| #define CPM_CLKGR0_UART2 BIT(17) |
| #define CPM_CLKGR0_UART1 BIT(16) |
| #define CPM_CLKGR0_UART0 BIT(15) |
| #define CPM_CLKGR0_SADC BIT(14) |
| #define CPM_CLKGR0_KBC BIT(13) |
| #define CPM_CLKGR0_MSC2 BIT(12) |
| #define CPM_CLKGR0_MSC1 BIT(11) |
| #define CPM_CLKGR0_OWI BIT(10) |
| #define CPM_CLKGR0_TSSI BIT(9) |
| #define CPM_CLKGR0_AIC BIT(8) |
| #define CPM_CLKGR0_SCC BIT(7) |
| #define CPM_CLKGR0_I2C1 BIT(6) |
| #define CPM_CLKGR0_I2C0 BIT(5) |
| #define CPM_CLKGR0_SSI0 BIT(4) |
| #define CPM_CLKGR0_MSC0 BIT(3) |
| #define CPM_CLKGR0_OTG BIT(2) |
| #define CPM_CLKGR0_BCH BIT(1) |
| #define CPM_CLKGR0_NEMC BIT(0) |
| |
| /* Clock Gate Register1 */ |
| #define CPM_CLKGR1_P1 BIT(15) |
| #define CPM_CLKGR1_X2D BIT(14) |
| #define CPM_CLKGR1_DES BIT(13) |
| #define CPM_CLKGR1_I2C4 BIT(12) |
| #define CPM_CLKGR1_AHB BIT(11) |
| #define CPM_CLKGR1_UART4 BIT(10) |
| #define CPM_CLKGR1_HDMI BIT(9) |
| #define CPM_CLKGR1_OTG1 BIT(8) |
| #define CPM_CLKGR1_GPVLC BIT(7) |
| #define CPM_CLKGR1_AIC1 BIT(6) |
| #define CPM_CLKGR1_COMPRES BIT(5) |
| #define CPM_CLKGR1_GPU BIT(4) |
| #define CPM_CLKGR1_PCM BIT(3) |
| #define CPM_CLKGR1_VPU BIT(2) |
| #define CPM_CLKGR1_TSSI1 BIT(1) |
| #define CPM_CLKGR1_I2C3 BIT(0) |
| |
| /* Oscillator and Power Control Register */ |
| #define CPM_OPCR_O1ST_BIT 8 |
| #define CPM_OPCR_O1ST_MASK (0xff << CPM_OPCR_O1ST_BIT) |
| #define CPM_OPCR_SPENDN BIT(7) |
| #define CPM_OPCR_GPSEN BIT(6) |
| #define CPM_OPCR_SPENDH BIT(5) |
| #define CPM_OPCR_O1SE BIT(4) |
| #define CPM_OPCR_ERCS BIT(2) /* 0: select EXCLK/512 clock, 1: RTCLK clock */ |
| #define CPM_OPCR_USBM BIT(0) /* 0: select EXCLK/512 clock, 1: RTCLK clock */ |
| |
| /* Reset Status Register */ |
| #define CPM_RSR_P0R BIT(2) |
| #define CPM_RSR_WR BIT(1) |
| #define CPM_RSR_PR BIT(0) |
| |
| /* BCH clock divider register */ |
| #define CPM_BCHCDR_BPCS_BIT 30 |
| #define CPM_BCHCDR_BPCS_MASK (0x3 << CPM_BCHCDR_BPCS_BIT) |
| #define CPM_BCHCDR_BPCS_STOP (0X0 << CPM_BCHCDR_BPCS_BIT) |
| #define CPM_BCHCDR_BPCS_SRC_CLK (0x1 << CPM_BCHCDR_BPCS_BIT) |
| #define CPM_BCHCDR_BPCS_MPLL (0x2 << CPM_BCHCDR_BPCS_BIT) |
| #define CPM_BCHCDR_BPCS_EPLL (0x3 << CPM_BCHCDR_BPCS_BIT) |
| #define CPM_BCHCDR_CE_BCH BIT(29) |
| #define CPM_BCHCDR_BCH_BUSY BIT(28) |
| #define CPM_BCHCDR_BCH_STOP BIT(27) |
| #define CPM_BCHCDR_BCHCDR_BIT 0 |
| #define CPM_BCHCDR_BCHCDR_MASK (0x7 << CPM_BCHCDR_BCHCDR_BIT) |
| |
| /* CPM scratch pad protected register(CPSPPR) */ |
| #define CPSPPR_CPSPR_WRITABLE 0x00005a5a |
| #define RECOVERY_SIGNATURE 0x1a1a /* means "RECY" */ |
| #define RECOVERY_SIGNATURE_SEC 0x800 /* means "RECY" */ |
| |
| #define REBOOT_SIGNATURE 0x3535 /* means reboot */ |
| |
| /* XPLL control register */ |
| #define XLOCK (1 << 6) |
| #define XPLL_ON (1 << 4) |
| #define XF_MODE (1 << 3) |
| #define XPLLBP (1 << 1) |
| #define XPLLEN (1 << 0) |
| |
| enum PLLS { |
| EXTCLK = 0, |
| APLL, |
| MPLL, |
| EPLL, |
| VPLL, |
| }; |
| |
| #define M_N_OD(m, n, od) \ |
| ((((m) - 1) << 19) | (((n) - 1) << 13) | (((od) - 1) << 9)) |
| |
| struct cgu_pll_select { |
| u8 reg; |
| u8 pll; |
| u8 pll_shift; |
| }; |
| |
| static void pll_init_one(int pll, int m, int n, int od) |
| { |
| void __iomem *cpm_regs = (void __iomem *)CPM_BASE; |
| void __iomem *pll_reg = cpm_regs + CPM_CPAPCR + ((pll - 1) * 4); |
| |
| setbits_le32(pll_reg, M_N_OD(m, n, od) | XPLLEN); |
| |
| /* FIXME */ |
| while (!(readl(pll_reg) & XPLL_ON)) |
| ; |
| } |
| |
| static void cpu_mux_select(int pll) |
| { |
| void __iomem *cpm_regs = (void __iomem *)CPM_BASE; |
| u32 clk_ctrl; |
| unsigned int selectplls[] = { |
| CPM_PLL_SEL_STOP, |
| CPM_PLL_SEL_SRC, |
| CPM_PLL_SEL_MPLL, |
| CPM_PLL_SEL_EPLL |
| }; |
| |
| /* Init CPU, L2CACHE, AHB0, AHB2, APB clock */ |
| clk_ctrl = CPM_CPCCR_CE_CPU | CPM_CPCCR_CE_AHB0 | CPM_CPCCR_CE_AHB2 | |
| ((6 - 1) << CPM_CPCCR_H2DIV_BIT) | |
| ((3 - 1) << CPM_CPCCR_H0DIV_BIT) | |
| ((2 - 1) << CPM_CPCCR_L2DIV_BIT) | |
| ((1 - 1) << CPM_CPCCR_CDIV_BIT); |
| |
| if (CONFIG_SYS_MHZ >= 1000) |
| clk_ctrl |= (12 - 1) << CPM_CPCCR_PDIV_BIT; |
| else |
| clk_ctrl |= (6 - 1) << CPM_CPCCR_PDIV_BIT; |
| |
| clrsetbits_le32(cpm_regs + CPM_CPCCR, 0x00ffffff, clk_ctrl); |
| |
| while (readl(cpm_regs + CPM_CPCSR) & (CPM_CPCSR_CDIV_BUSY | |
| CPM_CPCSR_H0DIV_BUSY | CPM_CPCSR_H2DIV_BUSY)) |
| ; |
| |
| clk_ctrl = (selectplls[pll] << CPM_CPCCR_SEL_CPLL_BIT) | |
| (selectplls[MPLL] << CPM_CPCCR_SEL_H0PLL_BIT) | |
| (selectplls[MPLL] << CPM_CPCCR_SEL_H2PLL_BIT); |
| if (pll == APLL) |
| clk_ctrl |= CPM_PLL_SEL_SRC << CPM_CPCCR_SEL_SRC_BIT; |
| else |
| clk_ctrl |= CPM_SRC_SEL_EXCLK << CPM_CPCCR_SEL_SRC_BIT; |
| |
| clrsetbits_le32(cpm_regs + CPM_CPCCR, 0xff << 24, clk_ctrl); |
| } |
| |
| static void ddr_mux_select(int pll) |
| { |
| void __iomem *cpm_regs = (void __iomem *)CPM_BASE; |
| int selectplls[] = { CPM_DDRCDR_DCS_STOP, |
| CPM_DDRCDR_DCS_SRC, |
| CPM_DDRCDR_DCS_MPLL}; |
| |
| writel(selectplls[pll] | CPM_DDRCDR_CE_DDR | (JZ4780_SYS_MEM_DIV - 1), |
| cpm_regs + CPM_DDCDR); |
| |
| while (readl(cpm_regs + CPM_DDCDR) & CPM_DDRCDR_DDR_BUSY) |
| ; |
| |
| clrbits_le32(cpm_regs + CPM_CLKGR0, CPM_CLKGR0_DDR0); |
| |
| mdelay(200); |
| } |
| |
| static void cgu_mux_init(struct cgu_pll_select *cgu, unsigned int num) |
| { |
| void __iomem *cpm_regs = (void __iomem *)CPM_BASE; |
| unsigned int selectplls[] = {0, 1, 2, 3, 2, 6}; |
| int i; |
| |
| for (i = 0; i < num; i++) |
| writel(selectplls[cgu[i].pll] << cgu[i].pll_shift, |
| cpm_regs + cgu[i].reg); |
| } |
| |
| void pll_init(void) |
| { |
| void __iomem *cpm_regs = (void __iomem *)CPM_BASE; |
| struct cgu_pll_select cgu_mux[] = { |
| { CPM_MSCCDR, MPLL, 30 }, |
| { CPM_LPCDR, VPLL, 30 }, |
| { CPM_LPCDR1, VPLL, 30 }, |
| { CPM_GPUCDR, MPLL, 30 }, |
| { CPM_HDMICDR, VPLL, 30 }, |
| { CPM_I2SCDR, EPLL, 30 }, |
| { CPM_BCHCDR, MPLL, 30 }, |
| { CPM_VPUCDR, 0x1, 30 }, |
| { CPM_UHCCDR, 0x3, 30 }, |
| { CPM_CIMCDR, 0x1, 31 }, |
| { CPM_PCMCDR, 0x5, 29 }, |
| { CPM_SSICDR, 0x3, 30 }, |
| }; |
| |
| /* PLL stable time set to default -- 1ms */ |
| clrsetbits_le32(cpm_regs + CPM_CPPCR, 0xfffff, (16 << 8) | 0x20); |
| |
| pll_init_one(APLL, JZ4780_APLL_M, JZ4780_APLL_N, JZ4780_APLL_OD); |
| pll_init_one(MPLL, JZ4780_MPLL_M, JZ4780_MPLL_N, JZ4780_MPLL_OD); |
| pll_init_one(VPLL, JZ4780_VPLL_M, JZ4780_VPLL_N, JZ4780_VPLL_OD); |
| pll_init_one(EPLL, JZ4780_EPLL_M, JZ4780_EPLL_N, JZ4780_EPLL_OD); |
| |
| cpu_mux_select(MPLL); |
| ddr_mux_select(MPLL); |
| cgu_mux_init(cgu_mux, ARRAY_SIZE(cgu_mux)); |
| } |
| |
| const u32 jz4780_clk_get_efuse_clk(void) |
| { |
| void __iomem *cpm_regs = (void __iomem *)CPM_BASE; |
| u32 cpccr = readl(cpm_regs + CPM_CPCCR); |
| u32 ahb2_div = ((cpccr & CPM_CPCCR_H2DIV_MASK) >> |
| CPM_CPCCR_H2DIV_BIT) + 1; |
| return JZ4780_SYS_MEM_SPEED / ahb2_div; |
| } |
| |
| void jz4780_clk_ungate_ethernet(void) |
| { |
| void __iomem *cpm_regs = (void __iomem *)CPM_BASE; |
| |
| clrbits_le32(cpm_regs + CPM_CLKGR0, CPM_CLKGR0_MAC); |
| clrbits_le32(cpm_regs + CPM_CLKGR0, CPM_CLKGR0_NEMC); |
| } |
| |
| void jz4780_clk_ungate_mmc(void) |
| { |
| void __iomem *cpm_regs = (void __iomem *)CPM_BASE; |
| u32 msc_cdr = JZ4780_SYS_MEM_SPEED / 24000000 / 2 - 1; |
| |
| msc_cdr |= CPM_MSCCDR_MPCS_MPLL | CPM_MSCCDR_CE; |
| writel(msc_cdr, cpm_regs + CPM_MSCCDR); |
| writel(msc_cdr, cpm_regs + CPM_MSCCDR1); |
| writel(msc_cdr, cpm_regs + CPM_MSCCDR2); |
| |
| /* The wait_for_bit() won't fit, thus unbounded loop here. */ |
| while (readl(cpm_regs + CPM_MSCCDR1) & CPM_MSCCDR_MSC_BUSY) |
| ; |
| } |
| |
| void jz4780_clk_ungate_uart(const unsigned int uart) |
| { |
| void __iomem *cpm_regs = (void __iomem *)CPM_BASE; |
| |
| if (uart == 0) |
| clrbits_le32(cpm_regs + CPM_CLKGR0, CPM_CLKGR0_UART0); |
| else if (uart == 1) |
| clrbits_le32(cpm_regs + CPM_CLKGR0, CPM_CLKGR0_UART1); |
| else if (uart == 2) |
| clrbits_le32(cpm_regs + CPM_CLKGR0, CPM_CLKGR0_UART2); |
| else if (uart == 3) |
| clrbits_le32(cpm_regs + CPM_CLKGR0, CPM_CLKGR0_UART3); |
| else if (uart == 4) |
| clrbits_le32(cpm_regs + CPM_CLKGR1, CPM_CLKGR1_UART4); |
| else |
| printf("%s[%i]: Invalid UART %d\n", __func__, __LINE__, uart); |
| } |