blob: 0ed2adfd84a36f7a3e356dd76266b8ccfa2dadc7 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2016-2021 Intel Corporation
*/
#include <altera.h>
#include <common.h>
#include <errno.h>
#include <fdtdec.h>
#include <init.h>
#include <miiphy.h>
#include <netdev.h>
#include <ns16550.h>
#include <spi_flash.h>
#include <watchdog.h>
#include <asm/arch/misc.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/reset_manager.h>
#include <asm/arch/reset_manager_arria10.h>
#include <asm/arch/sdram_arria10.h>
#include <asm/arch/system_manager.h>
#include <asm/arch/nic301.h>
#include <asm/io.h>
#include <asm/pl310.h>
#include <linux/sizes.h>
#define PINMUX_UART0_TX_SHARED_IO_OFFSET_Q1_3 0x08
#define PINMUX_UART0_TX_SHARED_IO_OFFSET_Q2_11 0x58
#define PINMUX_UART0_TX_SHARED_IO_OFFSET_Q3_3 0x68
#define PINMUX_UART1_TX_SHARED_IO_OFFSET_Q1_7 0x18
#define PINMUX_UART1_TX_SHARED_IO_OFFSET_Q3_7 0x78
#define PINMUX_UART1_TX_SHARED_IO_OFFSET_Q4_3 0x98
#define REGULAR_BOOT_MAGIC 0xd15ea5e
#define PERIPH_RBF_PROG_FORCE 0x50455249
#define QSPI_S25FL_SOFT_RESET_COMMAND 0x00f0ff82
#define QSPI_N25_SOFT_RESET_COMMAND 0x00000001
#define QSPI_NO_SOFT_RESET 0x00000000
/*
* FPGA programming support for SoC FPGA Arria 10
*/
static Altera_desc altera_fpga[] = {
{
/* Family */
Altera_SoCFPGA,
/* Interface type */
fast_passive_parallel,
/* No limitation as additional data will be ignored */
-1,
/* No device function table */
NULL,
/* Base interface address specified in driver */
NULL,
/* No cookie implementation */
0
},
};
#if defined(CONFIG_SPL_BUILD)
static struct pl310_regs *const pl310 =
(struct pl310_regs *)CONFIG_SYS_PL310_BASE;
static const struct socfpga_noc_fw_ocram *noc_fw_ocram_base =
(void *)SOCFPGA_SDR_FIREWALL_OCRAM_ADDRESS;
/*
+ * This function initializes security policies to be consistent across
+ * all logic units in the Arria 10.
+ *
+ * The idea is to set all security policies to be normal, nonsecure
+ * for all units.
+ */
void socfpga_init_security_policies(void)
{
/* Put OCRAM in non-secure */
writel(0x003f0000, &noc_fw_ocram_base->region0);
writel(0x1, &noc_fw_ocram_base->enable);
/* Put DDR in non-secure */
writel(0xffff0000, SOCFPGA_SDR_FIREWALL_L3_ADDRESS + 0xc);
writel(0x1, SOCFPGA_SDR_FIREWALL_L3_ADDRESS);
/* Enable priviledged and non-priviledged access to L4 peripherals */
writel(~0, SOCFPGA_NOC_L4_PRIV_FLT_OFST);
/* Enable secure and non-secure transactions to bridges */
writel(~0, SOCFPGA_NOC_FW_H2F_SCR_OFST);
writel(~0, SOCFPGA_NOC_FW_H2F_SCR_OFST + 4);
writel(0x0007FFFF,
socfpga_get_sysmgr_addr() + SYSMGR_A10_ECC_INTMASK_SET);
}
void socfpga_sdram_remap_zero(void)
{
/* Configure the L2 controller to make SDRAM start at 0 */
writel(0x1, &pl310->pl310_addr_filter_start);
}
#endif
int arch_early_init_r(void)
{
/* Add device descriptor to FPGA device table */
socfpga_fpga_add(&altera_fpga[0]);
return 0;
}
/*
* Print CPU information
*/
#if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo(void)
{
const u32 bootinfo = readl(socfpga_get_sysmgr_addr() +
SYSMGR_A10_BOOTINFO);
const u32 bsel = SYSMGR_GET_BOOTINFO_BSEL(bootinfo);
puts("CPU: Altera SoCFPGA Arria 10\n");
printf("BOOT: %s\n", bsel_str[bsel].name);
return 0;
}
#endif
void do_bridge_reset(int enable, unsigned int mask)
{
if (enable)
socfpga_reset_deassert_bridges_handoff();
else
socfpga_bridges_reset();
}
/*
* This function set/unset flag with number "0x50455249" to
* handoff register isw_handoff[7] - 0xffd0624c
* This flag is used to force periph RBF program regardless FPGA status
* and double periph RBF config are needed on some devices or boards to
* stabilize the IO config system.
*/
void force_periph_program(unsigned int status)
{
if (status)
writel(PERIPH_RBF_PROG_FORCE, socfpga_get_sysmgr_addr() +
SYSMGR_A10_ISW_HANDOFF_BASE + SYSMGR_A10_ISW_HANDOFF_7);
else
writel(0, socfpga_get_sysmgr_addr() +
SYSMGR_A10_ISW_HANDOFF_BASE + SYSMGR_A10_ISW_HANDOFF_7);
}
/*
* This function is used to check whether
* handoff register isw_handoff[7] contains
* flag for forcing the periph RBF program "0x50455249".
*/
bool is_periph_program_force(void)
{
unsigned int status;
status = readl(socfpga_get_sysmgr_addr() +
SYSMGR_A10_ISW_HANDOFF_BASE + SYSMGR_A10_ISW_HANDOFF_7);
if (status == PERIPH_RBF_PROG_FORCE)
return true;
else
return false;
}
/*
* This function set/unset magic number "0xd15ea5e" to
* handoff register isw_handoff[7] - 0xffd0624c
* This magic number is part of boot progress tracking
* and it's required for warm reset workaround on MPFE hang issue.
*/
void set_regular_boot(unsigned int status)
{
if (status)
writel(REGULAR_BOOT_MAGIC, socfpga_get_sysmgr_addr() +
SYSMGR_A10_ISW_HANDOFF_BASE + SYSMGR_A10_ISW_HANDOFF_7);
else
writel(0, socfpga_get_sysmgr_addr() +
SYSMGR_A10_ISW_HANDOFF_BASE + SYSMGR_A10_ISW_HANDOFF_7);
}
/*
* This function is used to check whether
* handoff register isw_handoff[7] contains
* magic number "0xd15ea5e".
*/
bool is_regular_boot_valid(void)
{
unsigned int status;
status = readl(socfpga_get_sysmgr_addr() +
SYSMGR_A10_ISW_HANDOFF_BASE + SYSMGR_A10_ISW_HANDOFF_7);
if (status == REGULAR_BOOT_MAGIC)
return true;
else
return false;
}
#if IS_ENABLED(CONFIG_CADENCE_QSPI)
/* This function is used to trigger software reset
* to the QSPI flash. On some boards, the QSPI flash reset may
* not be connected to the HPS warm reset.
*/
int qspi_flash_software_reset(void)
{
struct udevice *flash;
int ret;
/* Get the flash info */
ret = spi_flash_probe_bus_cs(CONFIG_SF_DEFAULT_BUS,
CONFIG_SF_DEFAULT_CS,
CONFIG_SF_DEFAULT_SPEED,
CONFIG_SF_DEFAULT_MODE,
&flash);
if (ret) {
debug("Failed to initialize SPI flash at ");
debug("%u:%u (error %d)\n", CONFIG_SF_DEFAULT_BUS,
CONFIG_SF_DEFAULT_CS, ret);
return -ENODEV;
}
if (!flash)
return -EINVAL;
/*
* QSPI flash software reset command, for the case where
* no HPS reset connected to QSPI flash reset
*/
if (!memcmp(flash->name, "N25", SZ_1 + SZ_2))
writel(QSPI_N25_SOFT_RESET_COMMAND, socfpga_get_sysmgr_addr() +
SYSMGR_A10_ROMCODE_QSPIRESETCOMMAND);
else if (!memcmp(flash->name, "S25FL", SZ_1 + SZ_4))
writel(QSPI_S25FL_SOFT_RESET_COMMAND,
socfpga_get_sysmgr_addr() +
SYSMGR_A10_ROMCODE_QSPIRESETCOMMAND);
else /* No software reset */
writel(QSPI_NO_SOFT_RESET, socfpga_get_sysmgr_addr() +
SYSMGR_A10_ROMCODE_QSPIRESETCOMMAND);
return 0;
}
#endif