| /* |
| * Copyright (C) 2018 MediaTek Inc. |
| * Author: Ryder Lee <ryder.lee@mediatek.com> |
| * |
| * SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| */ |
| |
| #include <dt-bindings/clock/mt7623-clk.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/phy/phy.h> |
| #include <dt-bindings/power/mt7623-power.h> |
| #include <dt-bindings/reset/mt7623-reset.h> |
| #include "skeleton.dtsi" |
| |
| / { |
| compatible = "mediatek,mt7623"; |
| interrupt-parent = <&sysirq>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| enable-method = "mediatek,mt6589-smp"; |
| |
| cpu0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0x0>; |
| clocks = <&infracfg CLK_INFRA_CPUSEL>, |
| <&apmixedsys CLK_APMIXED_MAINPLL>; |
| clock-names = "cpu", "intermediate"; |
| clock-frequency = <1300000000>; |
| }; |
| |
| cpu1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0x1>; |
| clocks = <&infracfg CLK_INFRA_CPUSEL>, |
| <&apmixedsys CLK_APMIXED_MAINPLL>; |
| clock-names = "cpu", "intermediate"; |
| clock-frequency = <1300000000>; |
| }; |
| |
| cpu2: cpu@2 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0x2>; |
| clocks = <&infracfg CLK_INFRA_CPUSEL>, |
| <&apmixedsys CLK_APMIXED_MAINPLL>; |
| clock-names = "cpu", "intermediate"; |
| clock-frequency = <1300000000>; |
| }; |
| |
| cpu3: cpu@3 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a7"; |
| reg = <0x3>; |
| clocks = <&infracfg CLK_INFRA_CPUSEL>, |
| <&apmixedsys CLK_APMIXED_MAINPLL>; |
| clock-names = "cpu", "intermediate"; |
| clock-frequency = <1300000000>; |
| }; |
| }; |
| |
| system_clk: dummy13m { |
| compatible = "fixed-clock"; |
| clock-frequency = <13000000>; |
| #clock-cells = <0>; |
| }; |
| |
| rtc32k: oscillator-1 { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <32000>; |
| clock-output-names = "rtc32k"; |
| }; |
| |
| clk26m: oscillator-0 { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <26000000>; |
| clock-output-names = "clk26m"; |
| }; |
| |
| timer { |
| compatible = "arm,armv7-timer"; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| clock-frequency = <13000000>; |
| arm,cpu-registers-not-fw-configured; |
| }; |
| |
| topckgen: clock-controller@10000000 { |
| compatible = "mediatek,mt7623-topckgen"; |
| reg = <0x10000000 0x1000>; |
| #clock-cells = <1>; |
| u-boot,dm-pre-reloc; |
| }; |
| |
| infracfg: syscon@10001000 { |
| compatible = "mediatek,mt7623-infracfg", "syscon"; |
| reg = <0x10001000 0x1000>; |
| #clock-cells = <1>; |
| u-boot,dm-pre-reloc; |
| }; |
| |
| pericfg: syscon@10003000 { |
| compatible = "mediatek,mt7623-pericfg", "syscon"; |
| reg = <0x10003000 0x1000>; |
| #clock-cells = <1>; |
| u-boot,dm-pre-reloc; |
| }; |
| |
| pinctrl: pinctrl@10005000 { |
| compatible = "mediatek,mt7623-pinctrl"; |
| reg = <0x10005000 0x1000>; |
| |
| gpio: gpio-controller { |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| }; |
| |
| scpsys: scpsys@10006000 { |
| compatible = "mediatek,mt7623-scpsys"; |
| #power-domain-cells = <1>; |
| reg = <0x10006000 0x1000>; |
| infracfg = <&infracfg>; |
| clocks = <&topckgen CLK_TOP_MM_SEL>, |
| <&topckgen CLK_TOP_MFG_SEL>, |
| <&topckgen CLK_TOP_ETHIF_SEL>; |
| clock-names = "mm", "mfg", "ethif"; |
| }; |
| |
| watchdog: watchdog@10007000 { |
| compatible = "mediatek,wdt"; |
| reg = <0x10007000 0x100>; |
| }; |
| |
| wdt-reboot { |
| compatible = "wdt-reboot"; |
| wdt = <&watchdog>; |
| }; |
| |
| timer0: timer@10008000 { |
| compatible = "mediatek,timer"; |
| reg = <0x10008000 0x80>; |
| interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&system_clk>; |
| clock-names = "system-clk"; |
| u-boot,dm-pre-reloc; |
| }; |
| |
| sysirq: interrupt-controller@10200100 { |
| compatible = "mediatek,sysirq"; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| interrupt-parent = <&gic>; |
| reg = <0x10200100 0x1c>; |
| }; |
| |
| apmixedsys: clock-controller@10209000 { |
| compatible = "mediatek,mt7623-apmixedsys"; |
| reg = <0x10209000 0x1000>; |
| #clock-cells = <1>; |
| u-boot,dm-pre-reloc; |
| }; |
| |
| gic: interrupt-controller@10211000 { |
| compatible = "arm,cortex-a7-gic"; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| interrupt-parent = <&gic>; |
| reg = <0x10211000 0x1000>, |
| <0x10212000 0x1000>, |
| <0x10214000 0x2000>, |
| <0x10216000 0x2000>; |
| }; |
| |
| uart0: serial@11002000 { |
| compatible = "mediatek,hsuart"; |
| reg = <0x11002000 0x400>; |
| reg-shift = <2>; |
| interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&topckgen CLK_TOP_UART_SEL>, |
| <&pericfg CLK_PERI_UART0>; |
| clock-names = "baud", "bus"; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@11003000 { |
| compatible = "mediatek,hsuart"; |
| reg = <0x11003000 0x400>; |
| reg-shift = <2>; |
| interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&topckgen CLK_TOP_UART_SEL>, |
| <&pericfg CLK_PERI_UART1>; |
| clock-names = "baud", "bus"; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@11004000 { |
| compatible = "mediatek,hsuart"; |
| reg = <0x11004000 0x400>; |
| reg-shift = <2>; |
| interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&topckgen CLK_TOP_UART_SEL>, |
| <&pericfg CLK_PERI_UART2>; |
| clock-names = "baud", "bus"; |
| status = "disabled"; |
| u-boot,dm-pre-reloc; |
| }; |
| |
| uart3: serial@11005000 { |
| compatible = "mediatek,hsuart"; |
| reg = <0x11005000 0x400>; |
| reg-shift = <2>; |
| interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&topckgen CLK_TOP_UART_SEL>, |
| <&pericfg CLK_PERI_UART3>; |
| clock-names = "baud", "bus"; |
| status = "disabled"; |
| }; |
| |
| mmc0: mmc@11230000 { |
| compatible = "mediatek,mt7623-mmc"; |
| reg = <0x11230000 0x1000>; |
| interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&pericfg CLK_PERI_MSDC30_0>, |
| <&topckgen CLK_TOP_MSDC30_0_SEL>; |
| clock-names = "source", "hclk"; |
| status = "disabled"; |
| }; |
| |
| mmc1: mmc@11240000 { |
| compatible = "mediatek,mt7623-mmc"; |
| reg = <0x11240000 0x1000>; |
| interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&pericfg CLK_PERI_MSDC30_1>, |
| <&topckgen CLK_TOP_MSDC30_1_SEL>; |
| clock-names = "source", "hclk"; |
| status = "disabled"; |
| }; |
| |
| hifsys: syscon@1a000000 { |
| compatible = "mediatek,mt7623-hifsys", "syscon"; |
| reg = <0x1a000000 0x1000>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| pcie: pcie@1a140000 { |
| compatible = "mediatek,mt7623-pcie"; |
| device_type = "pci"; |
| reg = <0x1a140000 0x1000>, /* PCIe shared registers */ |
| <0x1a142000 0x1000>, /* Port0 registers */ |
| <0x1a143000 0x1000>, /* Port1 registers */ |
| <0x1a144000 0x1000>; /* Port2 registers */ |
| reg-names = "subsys", "port0", "port1", "port2"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0xf800 0 0 0>; |
| interrupt-map = <0x0000 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>, |
| <0x0800 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>, |
| <0x1000 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>; |
| clocks = <&topckgen CLK_TOP_ETHIF_SEL>, |
| <&hifsys CLK_HIFSYS_PCIE0>, |
| <&hifsys CLK_HIFSYS_PCIE1>, |
| <&hifsys CLK_HIFSYS_PCIE2>; |
| clock-names = "free_ck", "sys_ck0", "sys_ck1", "sys_ck2"; |
| resets = <&hifsys HIFSYS_PCIE0_RST>, |
| <&hifsys HIFSYS_PCIE1_RST>, |
| <&hifsys HIFSYS_PCIE2_RST>; |
| reset-names = "pcie-rst0", "pcie-rst1", "pcie-rst2"; |
| phys = <&pcie0_port PHY_TYPE_PCIE>, |
| <&pcie1_port PHY_TYPE_PCIE>, |
| <&u3port1 PHY_TYPE_PCIE>; |
| phy-names = "pcie-phy0", "pcie-phy1", "pcie-phy2"; |
| power-domains = <&scpsys MT7623_POWER_DOMAIN_HIF>; |
| bus-range = <0x00 0xff>; |
| status = "disabled"; |
| ranges = <0x81000000 0 0x1a160000 0x1a160000 0 0x00010000 |
| 0x83000000 0 0x60000000 0x60000000 0 0x10000000>; |
| |
| pcie@0,0 { |
| reg = <0x0000 0 0 0 0>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0>; |
| interrupt-map = <0 0 0 0 &sysirq GIC_SPI 193 IRQ_TYPE_LEVEL_LOW>; |
| ranges; |
| status = "disabled"; |
| }; |
| |
| pcie@1,0 { |
| reg = <0x0800 0 0 0 0>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0>; |
| interrupt-map = <0 0 0 0 &sysirq GIC_SPI 194 IRQ_TYPE_LEVEL_LOW>; |
| ranges; |
| status = "disabled"; |
| }; |
| |
| pcie@2,0 { |
| reg = <0x1000 0 0 0 0>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0>; |
| interrupt-map = <0 0 0 0 &sysirq GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>; |
| ranges; |
| status = "disabled"; |
| }; |
| }; |
| |
| pcie0_phy: pcie-phy@1a149000 { |
| compatible = "mediatek,generic-tphy-v1"; |
| reg = <0x1a149000 0x0700>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| status = "disabled"; |
| |
| pcie0_port: pcie-phy@1a149900 { |
| reg = <0x1a149900 0x0700>; |
| clocks = <&clk26m>; |
| clock-names = "ref"; |
| #phy-cells = <1>; |
| status = "okay"; |
| }; |
| }; |
| |
| pcie1_phy: pcie-phy@1a14a000 { |
| compatible = "mediatek,generic-tphy-v1"; |
| reg = <0x1a14a000 0x0700>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| status = "disabled"; |
| |
| pcie1_port: pcie-phy@1a14a900 { |
| reg = <0x1a14a900 0x0700>; |
| clocks = <&clk26m>; |
| clock-names = "ref"; |
| #phy-cells = <1>; |
| status = "okay"; |
| }; |
| }; |
| |
| u3phy2: usb-phy@1a244000 { |
| compatible = "mediatek,generic-tphy-v1"; |
| reg = <0x1a244000 0x0700>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| status = "disabled"; |
| |
| u2port1: usb-phy@1a244800 { |
| reg = <0x1a244800 0x0100>; |
| clocks = <&topckgen CLK_TOP_USB_PHY48M>; |
| clock-names = "ref"; |
| #phy-cells = <1>; |
| status = "okay"; |
| }; |
| |
| u3port1: usb-phy@1a244900 { |
| reg = <0x1a244900 0x0700>; |
| clocks = <&clk26m>; |
| clock-names = "ref"; |
| #phy-cells = <1>; |
| status = "okay"; |
| }; |
| }; |
| |
| ethsys: syscon@1b000000 { |
| compatible = "mediatek,mt7623-ethsys", "syscon"; |
| reg = <0x1b000000 0x1000>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| }; |
| |
| eth: ethernet@1b100000 { |
| compatible = "mediatek,mt7623-eth", "syscon"; |
| reg = <0x1b100000 0x20000>; |
| clocks = <&topckgen CLK_TOP_ETHIF_SEL>, |
| <ðsys CLK_ETHSYS_ESW>, |
| <ðsys CLK_ETHSYS_GP1>, |
| <ðsys CLK_ETHSYS_GP2>, |
| <&apmixedsys CLK_APMIXED_TRGPLL>; |
| clock-names = "ethif", "esw", "gp1", "gp2", "trgpll"; |
| power-domains = <&scpsys MT7623_POWER_DOMAIN_ETH>; |
| resets = <ðsys ETHSYS_FE_RST>, |
| <ðsys ETHSYS_MCM_RST>; |
| reset-names = "fe", "mcm"; |
| mediatek,ethsys = <ðsys>; |
| status = "disabled"; |
| }; |
| }; |