| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com> |
| */ |
| |
| #include <dt-bindings/clock/bcm6348-clock.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/reset/bcm6348-reset.h> |
| #include "skeleton.dtsi" |
| |
| / { |
| compatible = "brcm,bcm6348"; |
| |
| aliases { |
| spi0 = &spi; |
| }; |
| |
| cpus { |
| reg = <0xfffe0000 0x4>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| u-boot,dm-pre-reloc; |
| |
| cpu@0 { |
| compatible = "brcm,bcm6348-cpu", "mips,mips4Kc"; |
| device_type = "cpu"; |
| reg = <0>; |
| u-boot,dm-pre-reloc; |
| }; |
| }; |
| |
| clocks { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| u-boot,dm-pre-reloc; |
| |
| periph_osc: periph-osc { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <50000000>; |
| u-boot,dm-pre-reloc; |
| }; |
| |
| periph_clk: periph-clk { |
| compatible = "brcm,bcm6345-clk"; |
| reg = <0xfffe0004 0x4>; |
| #clock-cells = <1>; |
| }; |
| }; |
| |
| pflash: nor@1fc00000 { |
| compatible = "cfi-flash"; |
| reg = <0x1fc00000 0x2000000>; |
| bank-width = <2>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| status = "disabled"; |
| }; |
| |
| ubus { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| u-boot,dm-pre-reloc; |
| |
| pll_cntl: syscon@fffe0008 { |
| compatible = "syscon"; |
| reg = <0xfffe0008 0x4>; |
| }; |
| |
| syscon-reboot { |
| compatible = "syscon-reboot"; |
| regmap = <&pll_cntl>; |
| offset = <0x0>; |
| mask = <0x1>; |
| }; |
| |
| periph_rst: reset-controller@fffe0028 { |
| compatible = "brcm,bcm6345-reset"; |
| reg = <0xfffe0028 0x4>; |
| #reset-cells = <1>; |
| }; |
| |
| wdt: watchdog@fffe021c { |
| compatible = "brcm,bcm6345-wdt"; |
| reg = <0xfffe021c 0xc>; |
| clocks = <&periph_osc>; |
| }; |
| |
| wdt-reboot { |
| compatible = "wdt-reboot"; |
| wdt = <&wdt>; |
| }; |
| |
| uart0: serial@fffe0300 { |
| compatible = "brcm,bcm6345-uart"; |
| reg = <0xfffe0300 0x18>; |
| clocks = <&periph_osc>; |
| |
| status = "disabled"; |
| }; |
| |
| gpio1: gpio-controller@fffe0400 { |
| compatible = "brcm,bcm6345-gpio"; |
| reg = <0xfffe0400 0x4>, <0xfffe0408 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <5>; |
| |
| status = "disabled"; |
| }; |
| |
| gpio0: gpio-controller@fffe0404 { |
| compatible = "brcm,bcm6345-gpio"; |
| reg = <0xfffe0404 0x4>, <0xfffe040c 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| status = "disabled"; |
| }; |
| |
| spi: spi@fffe0c00 { |
| compatible = "brcm,bcm6348-spi"; |
| reg = <0xfffe0c00 0xc0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&periph_clk BCM6348_CLK_SPI>; |
| resets = <&periph_rst BCM6348_RST_SPI>; |
| spi-max-frequency = <20000000>; |
| num-cs = <4>; |
| |
| status = "disabled"; |
| }; |
| |
| ohci: usb-controller@fffe1b00 { |
| compatible = "brcm,bcm6348-ohci", "generic-ohci"; |
| reg = <0xfffe1b00 0x100>; |
| phys = <&usbh>; |
| big-endian; |
| |
| status = "disabled"; |
| }; |
| |
| usbh: usb-phy@fffe1c00 { |
| compatible = "brcm,bcm6348-usbh"; |
| reg = <0xfffe1c00 0x4>; |
| #phy-cells = <0>; |
| clocks = <&periph_clk BCM6348_CLK_USBH>; |
| clock-names = "usbh"; |
| resets = <&periph_rst BCM6348_RST_USBH>; |
| |
| status = "disabled"; |
| }; |
| |
| memory-controller@fffe2300 { |
| compatible = "brcm,bcm6338-mc"; |
| reg = <0xfffe2300 0x38>; |
| u-boot,dm-pre-reloc; |
| }; |
| }; |
| }; |