| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Pinmux configuration for CompuLab CL-SOM-AM57x board |
| * |
| * (C) Copyright 2016 CompuLab, Ltd. http://compulab.co.il/ |
| * |
| * Author: Dmitry Lifshitz <lifshitz@compulab.co.il> |
| */ |
| #include <asm/arch/sys_proto.h> |
| #include <asm/arch/mux_dra7xx.h> |
| |
| /* Serial console */ |
| static const struct pad_conf_entry cl_som_am57x_padconf_console[] = { |
| {UART3_RXD, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* UART3_RXD */ |
| {UART3_TXD, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* UART3_TXD */ |
| }; |
| |
| /* PMIC I2C */ |
| static const struct pad_conf_entry cl_som_am57x_padconf_pmic[] = { |
| {MCASP1_ACLKR, (M10 | PIN_INPUT)}, /* MCASP1_ACLKR.I2C4_SDA */ |
| {MCASP1_FSR, (M10 | PIN_INPUT)}, /* MCASP1_FSR.I2C4_SCL */ |
| }; |
| |
| /* Green GPIO led */ |
| static const struct pad_conf_entry cl_som_am57x_padconf_green_led[] = { |
| {GPMC_A15, (M14 | PIN_OUTPUT_PULLDOWN)}, /* GPMC_A15.GPIO2_5 */ |
| }; |
| |
| /* MMC/SD Card */ |
| static const struct pad_conf_entry cl_som_am57x_padconf_sd_card[] = { |
| {MMC1_CLK, (M0 | PIN_INPUT_PULLUP)}, /* MMC1_CLK */ |
| {MMC1_CMD, (M0 | PIN_INPUT_PULLUP)}, /* MMC1_CMD */ |
| {MMC1_DAT0, (M0 | PIN_INPUT_PULLUP)}, /* MMC1_DAT0 */ |
| {MMC1_DAT1, (M0 | PIN_INPUT_PULLUP)}, /* MMC1_DAT1 */ |
| {MMC1_DAT2, (M0 | PIN_INPUT_PULLUP)}, /* MMC1_DAT2 */ |
| {MMC1_DAT3, (M0 | PIN_INPUT_PULLUP)}, /* MMC1_DAT3 */ |
| {MMC1_SDCD, (M14 | PIN_INPUT) }, /* MMC1_SDCD */ |
| {MMC1_SDWP, (M14 | PIN_INPUT) }, /* MMC1_SDWP */ |
| }; |
| |
| /* WiFi - must be in the safe mode on boot */ |
| static const struct pad_conf_entry cl_som_am57x_padconf_wifi[] = { |
| {UART1_CTSN, (M15 | PIN_INPUT_PULLDOWN)}, /* UART1_CTSN */ |
| {UART1_RTSN, (M15 | PIN_INPUT_PULLDOWN)}, /* UART1_RTSN */ |
| {UART2_RXD, (M15 | PIN_INPUT_PULLDOWN)}, /* UART2_RXD */ |
| {UART2_TXD, (M15 | PIN_INPUT_PULLDOWN)}, /* UART2_TXD */ |
| {UART2_CTSN, (M15 | PIN_INPUT_PULLDOWN)}, /* UART2_CTSN */ |
| {UART2_RTSN, (M15 | PIN_INPUT_PULLDOWN)}, /* UART2_RTSN */ |
| }; |
| |
| /* QSPI */ |
| static const struct pad_conf_entry cl_som_am57x_padconf_qspi[] = { |
| {GPMC_A13, (M1 | PIN_INPUT) }, /* GPMC_A13.QSPI1_RTCLK */ |
| {GPMC_A18, (M1 | PIN_INPUT) }, /* GPMC_A18.QSPI1_SCLK */ |
| {GPMC_A16, (M1 | PIN_INPUT) }, /* GPMC_A16.QSPI1_D0 */ |
| {GPMC_A17, (M1 | PIN_INPUT) }, /* GPMC_A17.QSPI1_D1 */ |
| {GPMC_CS2, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_CS2.QSPI1_CS0 */ |
| }; |
| |
| /* GPIO Expander I2C */ |
| static const struct pad_conf_entry cl_som_am57x_padconf_i2c_gpio[] = { |
| {MCASP1_AXR0, (M10 | PIN_INPUT)}, /* MCASP1_AXR0.I2C5_SDA */ |
| {MCASP1_AXR1, (M10 | PIN_INPUT)}, /* MCASP1_AXR1.I2C5_SCL */ |
| }; |
| |
| /* eMMC internal storage */ |
| static const struct pad_conf_entry cl_som_am57x_padconf_emmc[] = { |
| {GPMC_A19, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A19.MMC2_DAT4 */ |
| {GPMC_A20, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A20.MMC2_DAT5 */ |
| {GPMC_A21, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A21.MMC2_DAT6 */ |
| {GPMC_A22, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A22.MMC2_DAT7 */ |
| {GPMC_A23, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A23.MMC2_CLK */ |
| {GPMC_A24, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A24.MMC2_DAT0 */ |
| {GPMC_A25, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A25.MMC2_DAT1 */ |
| {GPMC_A26, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A26.MMC2_DAT2 */ |
| {GPMC_A27, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A27.MMC2_DAT3 */ |
| {GPMC_CS1, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_CS1.MMC2_CMD */ |
| }; |
| |
| /* usb1_drvvbus */ |
| static const struct pad_conf_entry cl_som_am57x_padconf_usb[] = { |
| /* USB1_DRVVBUS.USB1_DRVVBUS */ |
| {USB1_DRVVBUS, (M0 | PIN_OUTPUT_PULLDOWN | SLEWCONTROL) }, |
| }; |
| |
| /* Ethernet */ |
| static const struct pad_conf_entry cl_som_am57x_padconf_ethernet[] = { |
| /* MDIO bus */ |
| {VIN2A_D10, (M3 | PIN_OUTPUT_PULLUP) }, /* VIN2A_D10.MDIO_MCLK */ |
| {VIN2A_D11, (M3 | PIN_INPUT_PULLUP) }, /* VIN2A_D11.MDIO_D */ |
| /* EMAC Slave 1 at addr 0x1 - Default interface */ |
| {VIN2A_D12, (M3 | PIN_OUTPUT) }, /* VIN2A_D12.RGMII1_TXC */ |
| {VIN2A_D13, (M3 | PIN_OUTPUT) }, /* VIN2A_D13.RGMII1_TXCTL */ |
| {VIN2A_D14, (M3 | PIN_OUTPUT) }, /* VIN2A_D14.RGMII1_TXD3 */ |
| {VIN2A_D15, (M3 | PIN_OUTPUT) }, /* VIN2A_D15.RGMII1_TXD2 */ |
| {VIN2A_D16, (M3 | PIN_OUTPUT) }, /* VIN2A_D16.RGMII1_TXD1 */ |
| {VIN2A_D17, (M3 | PIN_OUTPUT) }, /* VIN2A_D17.RGMII1_TXD0 */ |
| {VIN2A_D18, (M3 | PIN_INPUT_PULLDOWN) }, /* VIN2A_D18.RGMII1_RXC */ |
| {VIN2A_D19, (M3 | PIN_INPUT_PULLDOWN) }, /* VIN2A_D19.RGMII1_RXCTL */ |
| {VIN2A_D20, (M3 | PIN_INPUT_PULLDOWN) }, /* VIN2A_D20.RGMII1_RXD3 */ |
| {VIN2A_D21, (M3 | PIN_INPUT_PULLDOWN) }, /* VIN2A_D21.RGMII1_RXD2 */ |
| {VIN2A_D22, (M3 | PIN_INPUT_PULLDOWN) }, /* VIN2A_D22.RGMII1_RXD1 */ |
| {VIN2A_D23, (M3 | PIN_INPUT_PULLDOWN) }, /* VIN2A_D23.RGMII1_RXD0 */ |
| /* Eth PHY1 reset GPIOs*/ |
| {VIN2A_CLK0, (M14 | PIN_OUTPUT_PULLDOWN)}, /* VIN2A_CLK0.GPIO3_28 */ |
| }; |
| |
| #define SET_MUX(mux_array) do_set_mux32((*ctrl)->control_padconf_core_base, \ |
| mux_array, ARRAY_SIZE(mux_array)) |
| |
| void set_muxconf_regs(void) |
| { |
| SET_MUX(cl_som_am57x_padconf_console); |
| SET_MUX(cl_som_am57x_padconf_pmic); |
| SET_MUX(cl_som_am57x_padconf_green_led); |
| SET_MUX(cl_som_am57x_padconf_sd_card); |
| SET_MUX(cl_som_am57x_padconf_wifi); |
| SET_MUX(cl_som_am57x_padconf_qspi); |
| SET_MUX(cl_som_am57x_padconf_i2c_gpio); |
| SET_MUX(cl_som_am57x_padconf_emmc); |
| SET_MUX(cl_som_am57x_padconf_usb); |
| SET_MUX(cl_som_am57x_padconf_ethernet); |
| } |