| // SPDX-License-Identifier: GPL-2.0 |
| /*- |
| * Copyright (c) 2007-2008, Juniper Networks, Inc. |
| * All rights reserved. |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <pci.h> |
| #include <usb.h> |
| #include <asm/io.h> |
| |
| #include "ehci.h" |
| |
| /* Information about a USB port */ |
| struct ehci_pci_priv { |
| struct ehci_ctrl ehci; |
| struct phy phy; |
| }; |
| |
| #ifdef CONFIG_DM_USB |
| static int ehci_pci_init(struct udevice *dev, struct ehci_hccr **ret_hccr, |
| struct ehci_hcor **ret_hcor) |
| { |
| struct ehci_pci_priv *priv = dev_get_priv(dev); |
| struct ehci_hccr *hccr; |
| struct ehci_hcor *hcor; |
| int ret; |
| u32 cmd; |
| |
| ret = ehci_setup_phy(dev, &priv->phy, 0); |
| if (ret) |
| return ret; |
| |
| hccr = (struct ehci_hccr *)dm_pci_map_bar(dev, |
| PCI_BASE_ADDRESS_0, PCI_REGION_MEM); |
| hcor = (struct ehci_hcor *)((uintptr_t) hccr + |
| HC_LENGTH(ehci_readl(&hccr->cr_capbase))); |
| |
| debug("EHCI-PCI init hccr %#lx and hcor %#lx hc_length %d\n", |
| (ulong)hccr, (ulong)hcor, |
| (u32)HC_LENGTH(ehci_readl(&hccr->cr_capbase))); |
| |
| *ret_hccr = hccr; |
| *ret_hcor = hcor; |
| |
| /* enable busmaster */ |
| dm_pci_read_config32(dev, PCI_COMMAND, &cmd); |
| cmd |= PCI_COMMAND_MASTER; |
| dm_pci_write_config32(dev, PCI_COMMAND, cmd); |
| |
| return 0; |
| } |
| |
| #else |
| |
| #ifdef CONFIG_PCI_EHCI_DEVICE |
| static struct pci_device_id ehci_pci_ids[] = { |
| /* Please add supported PCI EHCI controller ids here */ |
| {0x1033, 0x00E0}, /* NEC */ |
| {0x10B9, 0x5239}, /* ULI1575 PCI EHCI module ids */ |
| {0x12D8, 0x400F}, /* Pericom */ |
| {0, 0} |
| }; |
| #endif |
| |
| static void ehci_pci_legacy_init(pci_dev_t pdev, struct ehci_hccr **ret_hccr, |
| struct ehci_hcor **ret_hcor) |
| { |
| struct ehci_hccr *hccr; |
| struct ehci_hcor *hcor; |
| u32 cmd; |
| |
| hccr = (struct ehci_hccr *)pci_map_bar(pdev, |
| PCI_BASE_ADDRESS_0, PCI_REGION_MEM); |
| hcor = (struct ehci_hcor *)((uintptr_t) hccr + |
| HC_LENGTH(ehci_readl(&hccr->cr_capbase))); |
| |
| debug("EHCI-PCI init hccr 0x%x and hcor 0x%x hc_length %d\n", |
| (u32)hccr, (u32)hcor, |
| (u32)HC_LENGTH(ehci_readl(&hccr->cr_capbase))); |
| |
| *ret_hccr = hccr; |
| *ret_hcor = hcor; |
| |
| /* enable busmaster */ |
| pci_read_config_dword(pdev, PCI_COMMAND, &cmd); |
| cmd |= PCI_COMMAND_MASTER; |
| pci_write_config_dword(pdev, PCI_COMMAND, cmd); |
| } |
| |
| /* |
| * Create the appropriate control structures to manage |
| * a new EHCI host controller. |
| */ |
| int ehci_hcd_init(int index, enum usb_init_type init, |
| struct ehci_hccr **ret_hccr, struct ehci_hcor **ret_hcor) |
| { |
| pci_dev_t pdev; |
| |
| #ifdef CONFIG_PCI_EHCI_DEVICE |
| pdev = pci_find_devices(ehci_pci_ids, CONFIG_PCI_EHCI_DEVICE); |
| #else |
| pdev = pci_find_class(PCI_CLASS_SERIAL_USB_EHCI, index); |
| #endif |
| if (pdev < 0) { |
| printf("EHCI host controller not found\n"); |
| return -1; |
| } |
| ehci_pci_legacy_init(pdev, ret_hccr, ret_hcor); |
| |
| return 0; |
| } |
| |
| /* |
| * Destroy the appropriate control structures corresponding |
| * the the EHCI host controller. |
| */ |
| int ehci_hcd_stop(int index) |
| { |
| return 0; |
| } |
| #endif /* nCONFIG_DM_USB */ |
| |
| #ifdef CONFIG_DM_USB |
| static int ehci_pci_probe(struct udevice *dev) |
| { |
| struct ehci_hccr *hccr; |
| struct ehci_hcor *hcor; |
| int ret; |
| |
| ret = ehci_pci_init(dev, &hccr, &hcor); |
| if (ret) |
| return ret; |
| |
| return ehci_register(dev, hccr, hcor, NULL, 0, USB_INIT_HOST); |
| } |
| |
| static int ehci_pci_remove(struct udevice *dev) |
| { |
| struct ehci_pci_priv *priv = dev_get_priv(dev); |
| int ret; |
| |
| ret = ehci_deregister(dev); |
| if (ret) |
| return ret; |
| |
| return ehci_shutdown_phy(dev, &priv->phy); |
| } |
| |
| static const struct udevice_id ehci_pci_ids[] = { |
| { .compatible = "ehci-pci" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(ehci_pci) = { |
| .name = "ehci_pci", |
| .id = UCLASS_USB, |
| .probe = ehci_pci_probe, |
| .remove = ehci_pci_remove, |
| .of_match = ehci_pci_ids, |
| .ops = &ehci_usb_ops, |
| .platdata_auto_alloc_size = sizeof(struct usb_platdata), |
| .priv_auto_alloc_size = sizeof(struct ehci_pci_priv), |
| .flags = DM_FLAG_ALLOC_PRIV_DMA, |
| }; |
| |
| static struct pci_device_id ehci_pci_supported[] = { |
| { PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_EHCI, ~0) }, |
| {}, |
| }; |
| |
| U_BOOT_PCI_DEVICE(ehci_pci, ehci_pci_supported); |
| |
| #endif /* CONFIG_DM_USB */ |