| CONFIG_ARM=y |
| # CONFIG_SPL_USE_ARCH_MEMCPY is not set |
| # CONFIG_SPL_USE_ARCH_MEMSET is not set |
| CONFIG_ARCH_OMAP2PLUS=y |
| CONFIG_SYS_MALLOC_F_LEN=0x4000 |
| CONFIG_NR_DRAM_BANKS=2 |
| CONFIG_SPL_TEXT_BASE=0x40200000 |
| CONFIG_TARGET_OMAP3_EVM=y |
| CONFIG_SPL_SYS_MALLOC_F_LEN=0x400 |
| CONFIG_SPL=y |
| CONFIG_DEFAULT_DEVICE_TREE="omap3-evm" |
| CONFIG_DISTRO_DEFAULTS=y |
| CONFIG_USE_PREBOOT=y |
| CONFIG_DEFAULT_FDT_FILE="omap3-evm.dtb" |
| CONFIG_SYS_CONSOLE_INFO_QUIET=y |
| CONFIG_SPL_SYS_MALLOC_SIMPLE=y |
| CONFIG_SPL_SEPARATE_BSS=y |
| # CONFIG_SPL_FS_EXT4 is not set |
| CONFIG_SPL_MTD_SUPPORT=y |
| CONFIG_SPL_NAND_DRIVERS=y |
| CONFIG_SPL_NAND_ECC=y |
| CONFIG_SPL_NAND_SIMPLE=y |
| CONFIG_SPL_NAND_BASE=y |
| CONFIG_SYS_PROMPT="OMAP3_EVM # " |
| CONFIG_CMD_SPL=y |
| CONFIG_CMD_SPL_NAND_OFS=0x280000 |
| CONFIG_CMD_SPL_WRITE_SIZE=0x20000 |
| CONFIG_CMD_ASKENV=y |
| # CONFIG_CMD_FLASH is not set |
| CONFIG_CMD_GPIO=y |
| CONFIG_CMD_I2C=y |
| CONFIG_CMD_MMC=y |
| CONFIG_CMD_NAND=y |
| CONFIG_CMD_NAND_TRIMFFS=y |
| CONFIG_CMD_SPI=y |
| CONFIG_CMD_USB=y |
| CONFIG_CMD_CACHE=y |
| CONFIG_CMD_EXT4_WRITE=y |
| CONFIG_CMD_FS_UUID=y |
| CONFIG_CMD_MTDPARTS=y |
| CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0" |
| CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(spl),1920k(u-boot),128k(u-boot-env),128k(dtb),6m(kernel),-(rootfs)" |
| CONFIG_CMD_UBI=y |
| # CONFIG_ISO_PARTITION is not set |
| # CONFIG_SPL_EFI_PARTITION is not set |
| CONFIG_SPL_PARTITION_UUIDS=y |
| CONFIG_OF_CONTROL=y |
| CONFIG_SPL_OF_CONTROL=y |
| CONFIG_OF_SPL_REMOVE_PROPS="clocks clock-names interrupt-parent" |
| CONFIG_ENV_OVERWRITE=y |
| CONFIG_ENV_IS_IN_NAND=y |
| CONFIG_VERSION_VARIABLE=y |
| CONFIG_SPL_DM=y |
| CONFIG_SPL_DM_SEQ_ALIAS=y |
| CONFIG_SPL_OF_TRANSLATE=y |
| CONFIG_USB_FUNCTION_FASTBOOT=y |
| CONFIG_FASTBOOT_BUF_ADDR=0x82000000 |
| CONFIG_GPIO_HOG=y |
| CONFIG_MMC_OMAP_HS=y |
| CONFIG_MTD=y |
| CONFIG_MTD_RAW_NAND=y |
| CONFIG_SYS_NAND_BUSWIDTH_16BIT=y |
| CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y |
| CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000 |
| CONFIG_DM_ETH=y |
| CONFIG_SMC911X=y |
| CONFIG_SMC911X_32_BIT=y |
| CONFIG_SPI=y |
| CONFIG_DM_SPI=y |
| CONFIG_OMAP3_SPI=y |
| CONFIG_USB=y |
| CONFIG_DM_USB=y |
| # CONFIG_SPL_DM_USB is not set |
| CONFIG_USB_EHCI_HCD=y |
| CONFIG_USB_OMAP3=y |
| CONFIG_USB_MUSB_GADGET=y |
| CONFIG_USB_MUSB_OMAP2PLUS=y |
| CONFIG_USB_GADGET=y |
| CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" |
| CONFIG_USB_GADGET_VENDOR_NUM=0x0451 |
| CONFIG_USB_GADGET_PRODUCT_NUM=0x5678 |
| CONFIG_USB_ETHER=y |
| CONFIG_USB_HOST_ETHER=y |
| CONFIG_USB_ETHER_ASIX=y |
| CONFIG_USB_ETHER_MCS7830=y |
| CONFIG_USB_ETHER_SMSC95XX=y |
| CONFIG_VIDEO_OMAP3=y |
| CONFIG_BCH=y |