| config DM_PWM |
| bool "Enable support for pulse-width modulation devices (PWM)" |
| depends on DM |
| help |
| A pulse-width modulator emits a pulse of varying width and provides |
| control over the duty cycle (high and low time) of the signal. This |
| is often used to control a voltage level. The more time the PWM |
| spends in the 'high' state, the higher the voltage. The PWM's |
| frequency/period can be controlled along with the proportion of that |
| time that the signal is high. |
| |
| config PWM_ASPEED |
| bool "Enable support for the Aspeed PWM" |
| depends on DM_PWM |
| select SYSCON |
| help |
| This PWM is found on Ast2600 SoCs. It supports a programmable period |
| and duty cycle. It provides 16 channels which can be independently |
| programmed. |
| |
| config PWM_AT91 |
| bool "Enable support for PWM found on AT91 SoC's" |
| depends on DM_PWM && ARCH_AT91 |
| help |
| Support for PWM hardware on AT91 based SoC. |
| |
| config PWM_CADENCE_TTC |
| bool "Enable support for the Cadence TTC PWM" |
| depends on DM_PWM && !CADENCE_TTC_TIMER |
| help |
| Cadence TTC can be configured as timer which is done via |
| CONFIG_CADENCE_TTC_TIMER or as PWM. This is covering only PWM now. |
| |
| config PWM_CROS_EC |
| bool "Enable support for the Chrome OS EC PWM" |
| depends on DM_PWM |
| help |
| This PWM is found on several Chrome OS devices and controlled by |
| the Chrome OS embedded controller. It may be used to control the |
| screen brightness and/or the keyboard backlight depending on the |
| device. |
| |
| config PWM_EXYNOS |
| bool "Enable support for the Exynos PWM" |
| depends on DM_PWM |
| help |
| This PWM is found on Samsung Exynos 5250 and other Samsung SoCs. It |
| supports a programmable period and duty cycle. A 32-bit counter is |
| used. It provides 5 channels which can be independently |
| programmed. Channel 4 (the last) is normally used as a timer. |
| |
| config PWM_IMX |
| bool "Enable support for i.MX27 and later PWM" |
| help |
| This PWM is found i.MX27 and later i.MX SoCs. |
| |
| config PWM_MESON |
| bool "Enable support for Amlogic Meson SoCs PWM" |
| depends on DM_PWM |
| help |
| This PWM is found on Amlogic Meson SoCs. It supports a |
| programmable period and duty cycle for 2 independant channels. |
| |
| config PWM_MTK |
| bool "Enable support for MediaTek PWM" |
| depends on DM_PWM |
| help |
| This PWM is found on MT7622, MT7623, and MT7629. It supports a |
| programmable period and duty cycle. |
| |
| config PWM_ROCKCHIP |
| bool "Enable support for the Rockchip PWM" |
| depends on DM_PWM |
| help |
| This PWM is found on RK3288 and other Rockchip SoCs. It supports a |
| programmable period and duty cycle. A 32-bit counter is used. |
| Various options provided in the hardware (such as capture mode and |
| continuous/single-shot) are not supported by the driver. |
| |
| config PWM_SANDBOX |
| bool "Enable support for the sandbox PWM" |
| help |
| This is a sandbox PWM used for testing. It provides 3 channels and |
| records the settings passed into it, but otherwise does nothing |
| useful. The PWM can be enabled but is not connected to any outputs |
| so this is not very useful. |
| |
| config PWM_S5P |
| bool "Enable non-DM support for S5P PWM" |
| depends on (S5P || ARCH_NEXELL) |
| default y |
| |
| config PWM_SIFIVE |
| bool "Enable support for SiFive PWM" |
| depends on DM_PWM |
| help |
| This PWM is found SiFive's FU540 and other SoCs. |
| |
| config PWM_TEGRA |
| bool "Enable support for the Tegra PWM" |
| depends on DM_PWM |
| help |
| This PWM is found on Tegra 20 and other Nvidia SoCs. It supports |
| four channels with a programmable period and duty cycle. Only a |
| 32KHz clock is supported by the driver but the duty cycle is |
| configurable. |
| |
| config PWM_SUNXI |
| bool "Enable support for the Allwinner Sunxi PWM" |
| depends on DM_PWM |
| help |
| This PWM is found on H3, A64 and other Allwinner SoCs. It supports a |
| programmable period and duty cycle. A 16-bit counter is used. |
| |
| config PWM_TI_EHRPWM |
| bool "Enable support for EHRPWM PWM" |
| depends on DM_PWM && ARCH_OMAP2PLUS |
| default y |
| help |
| PWM driver support for the EHRPWM controller found on TI SOCs. |