| /* |
| * armboot - Startup Code for XScale CPU-core |
| * |
| * Copyright (C) 1998 Dan Malek <dmalek@jlc.net> |
| * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se> |
| * Copyright (C) 2000 Wolfgang Denk <wd@denx.de> |
| * Copyright (C) 2001 Alex Zuepke <azu@sysgo.de> |
| * Copyright (C) 2001 Marius Groger <mag@sysgo.de> |
| * Copyright (C) 2002 Alex Zupke <azu@sysgo.de> |
| * Copyright (C) 2002 Gary Jennejohn <garyj@denx.de> |
| * Copyright (C) 2002 Kyle Harris <kharris@nexus-tech.net> |
| * Copyright (C) 2003 Kai-Uwe Bloem <kai-uwe.bloem@auerswald.de> |
| * Copyright (C) 2003 Kshitij <kshitij@ti.com> |
| * Copyright (C) 2003 Richard Woodruff <r-woodruff2@ti.com> |
| * Copyright (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de> |
| * Copyright (C) 2004 Texas Instruments <r-woodruff2@ti.com> |
| * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <asm-offsets.h> |
| #include <config.h> |
| #include <version.h> |
| |
| #ifdef CONFIG_CPU_PXA25X |
| #if ((CONFIG_SYS_INIT_SP_ADDR) != 0xfffff800) |
| #error "Init SP address must be set to 0xfffff800 for PXA250" |
| #endif |
| #endif |
| |
| .globl _start |
| _start: b reset |
| #ifdef CONFIG_SPL_BUILD |
| ldr pc, _hang |
| ldr pc, _hang |
| ldr pc, _hang |
| ldr pc, _hang |
| ldr pc, _hang |
| ldr pc, _hang |
| ldr pc, _hang |
| |
| _hang: |
| .word do_hang |
| .word 0x12345678 |
| .word 0x12345678 |
| .word 0x12345678 |
| .word 0x12345678 |
| .word 0x12345678 |
| .word 0x12345678 |
| .word 0x12345678 /* now 16*4=64 */ |
| #else |
| ldr pc, _undefined_instruction |
| ldr pc, _software_interrupt |
| ldr pc, _prefetch_abort |
| ldr pc, _data_abort |
| ldr pc, _not_used |
| ldr pc, _irq |
| ldr pc, _fiq |
| |
| _undefined_instruction: .word undefined_instruction |
| _software_interrupt: .word software_interrupt |
| _prefetch_abort: .word prefetch_abort |
| _data_abort: .word data_abort |
| _not_used: .word not_used |
| _irq: .word irq |
| _fiq: .word fiq |
| _pad: .word 0x12345678 /* now 16*4=64 */ |
| #endif /* CONFIG_SPL_BUILD */ |
| .global _end_vect |
| _end_vect: |
| |
| .balignl 16,0xdeadbeef |
| /* |
| ************************************************************************* |
| * |
| * Startup Code (reset vector) |
| * |
| * do important init only if we don't start from memory! |
| * setup Memory and board specific bits prior to relocation. |
| * relocate armboot to ram |
| * setup stack |
| * |
| ************************************************************************* |
| */ |
| |
| .globl _TEXT_BASE |
| _TEXT_BASE: |
| #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE) |
| .word CONFIG_SPL_TEXT_BASE |
| #else |
| .word CONFIG_SYS_TEXT_BASE |
| #endif |
| |
| /* |
| * These are defined in the board-specific linker script. |
| * Subtracting _start from them lets the linker put their |
| * relative position in the executable instead of leaving |
| * them null. |
| */ |
| .globl _bss_start_ofs |
| _bss_start_ofs: |
| .word __bss_start - _start |
| |
| .globl _bss_end_ofs |
| _bss_end_ofs: |
| .word __bss_end - _start |
| |
| .globl _end_ofs |
| _end_ofs: |
| .word _end - _start |
| |
| #ifdef CONFIG_USE_IRQ |
| /* IRQ stack memory (calculated at run-time) */ |
| .globl IRQ_STACK_START |
| IRQ_STACK_START: |
| .word 0x0badc0de |
| |
| /* IRQ stack memory (calculated at run-time) */ |
| .globl FIQ_STACK_START |
| FIQ_STACK_START: |
| .word 0x0badc0de |
| #endif |
| |
| /* IRQ stack memory (calculated at run-time) + 8 bytes */ |
| .globl IRQ_STACK_START_IN |
| IRQ_STACK_START_IN: |
| .word 0x0badc0de |
| |
| /* |
| * the actual reset code |
| */ |
| |
| reset: |
| /* |
| * set the cpu to SVC32 mode |
| */ |
| mrs r0,cpsr |
| bic r0,r0,#0x1f |
| orr r0,r0,#0xd3 |
| msr cpsr,r0 |
| |
| #ifndef CONFIG_SKIP_LOWLEVEL_INIT |
| bl cpu_init_crit |
| #endif |
| |
| #ifdef CONFIG_CPU_PXA25X |
| bl lock_cache_for_stack |
| #endif |
| |
| bl _main |
| |
| /*------------------------------------------------------------------------------*/ |
| |
| .globl c_runtime_cpu_setup |
| c_runtime_cpu_setup: |
| |
| #ifdef CONFIG_CPU_PXA25X |
| /* |
| * Unlock (actually, disable) the cache now that board_init_f |
| * is done. We could do this earlier but we would need to add |
| * a new C runtime hook, whereas c_runtime_cpu_setup already |
| * exists. |
| * As this routine is just a call to cpu_init_crit, let us |
| * tail-optimize and do a simple branch here. |
| */ |
| b cpu_init_crit |
| #else |
| bx lr |
| #endif |
| |
| /* |
| ************************************************************************* |
| * |
| * CPU_init_critical registers |
| * |
| * setup important registers |
| * setup memory timing |
| * |
| ************************************************************************* |
| */ |
| #if !defined(CONFIG_SKIP_LOWLEVEL_INIT) || defined(CONFIG_CPU_PXA25X) |
| cpu_init_crit: |
| /* |
| * flush v4 I/D caches |
| */ |
| mov r0, #0 |
| mcr p15, 0, r0, c7, c7, 0 /* Invalidate I+D+BTB caches */ |
| mcr p15, 0, r0, c8, c7, 0 /* Invalidate Unified TLB */ |
| |
| /* |
| * disable MMU stuff and caches |
| */ |
| mrc p15, 0, r0, c1, c0, 0 |
| bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS) |
| bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM) |
| orr r0, r0, #0x00000002 @ set bit 2 (A) Align |
| orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache |
| mcr p15, 0, r0, c1, c0, 0 |
| |
| mov pc, lr /* back to my caller */ |
| #endif /* !CONFIG_SKIP_LOWLEVEL_INIT || CONFIG_CPU_PXA25X */ |
| |
| #ifndef CONFIG_SPL_BUILD |
| /* |
| ************************************************************************* |
| * |
| * Interrupt handling |
| * |
| ************************************************************************* |
| */ |
| @ |
| @ IRQ stack frame. |
| @ |
| #define S_FRAME_SIZE 72 |
| |
| #define S_OLD_R0 68 |
| #define S_PSR 64 |
| #define S_PC 60 |
| #define S_LR 56 |
| #define S_SP 52 |
| |
| #define S_IP 48 |
| #define S_FP 44 |
| #define S_R10 40 |
| #define S_R9 36 |
| #define S_R8 32 |
| #define S_R7 28 |
| #define S_R6 24 |
| #define S_R5 20 |
| #define S_R4 16 |
| #define S_R3 12 |
| #define S_R2 8 |
| #define S_R1 4 |
| #define S_R0 0 |
| |
| #define MODE_SVC 0x13 |
| #define I_BIT 0x80 |
| |
| /* |
| * use bad_save_user_regs for abort/prefetch/undef/swi ... |
| * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling |
| */ |
| |
| .macro bad_save_user_regs |
| sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current user stack |
| stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12 |
| |
| ldr r2, IRQ_STACK_START_IN @ set base 2 words into abort stack |
| ldmia r2, {r2 - r3} @ get values for "aborted" pc and cpsr (into parm regs) |
| add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack |
| |
| add r5, sp, #S_SP |
| mov r1, lr |
| stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr |
| mov r0, sp @ save current stack into r0 (param register) |
| .endm |
| |
| .macro irq_save_user_regs |
| sub sp, sp, #S_FRAME_SIZE |
| stmia sp, {r0 - r12} @ Calling r0-r12 |
| add r8, sp, #S_PC @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good. |
| stmdb r8, {sp, lr}^ @ Calling SP, LR |
| str lr, [r8, #0] @ Save calling PC |
| mrs r6, spsr |
| str r6, [r8, #4] @ Save CPSR |
| str r0, [r8, #8] @ Save OLD_R0 |
| mov r0, sp |
| .endm |
| |
| .macro irq_restore_user_regs |
| ldmia sp, {r0 - lr}^ @ Calling r0 - lr |
| mov r0, r0 |
| ldr lr, [sp, #S_PC] @ Get PC |
| add sp, sp, #S_FRAME_SIZE |
| subs pc, lr, #4 @ return & move spsr_svc into cpsr |
| .endm |
| |
| .macro get_bad_stack |
| ldr r13, IRQ_STACK_START_IN @ setup our mode stack (enter in banked mode) |
| |
| str lr, [r13] @ save caller lr in position 0 of saved stack |
| mrs lr, spsr @ get the spsr |
| str lr, [r13, #4] @ save spsr in position 1 of saved stack |
| |
| mov r13, #MODE_SVC @ prepare SVC-Mode |
| @ msr spsr_c, r13 |
| msr spsr, r13 @ switch modes, make sure moves will execute |
| mov lr, pc @ capture return pc |
| movs pc, lr @ jump to next instruction & switch modes. |
| .endm |
| |
| .macro get_bad_stack_swi |
| sub r13, r13, #4 @ space on current stack for scratch reg. |
| str r0, [r13] @ save R0's value. |
| ldr r0, IRQ_STACK_START_IN @ get data regions start |
| str lr, [r0] @ save caller lr in position 0 of saved stack |
| mrs lr, spsr @ get the spsr |
| str lr, [r0, #4] @ save spsr in position 1 of saved stack |
| ldr lr, [r0] @ restore lr |
| ldr r0, [r13] @ restore r0 |
| add r13, r13, #4 @ pop stack entry |
| .endm |
| |
| .macro get_irq_stack @ setup IRQ stack |
| ldr sp, IRQ_STACK_START |
| .endm |
| |
| .macro get_fiq_stack @ setup FIQ stack |
| ldr sp, FIQ_STACK_START |
| .endm |
| #endif /* CONFIG_SPL_BUILD */ |
| |
| /* |
| * exception handlers |
| */ |
| #ifdef CONFIG_SPL_BUILD |
| .align 5 |
| do_hang: |
| ldr sp, _TEXT_BASE /* use 32 words about stack */ |
| bl hang /* hang and never return */ |
| #else /* !CONFIG_SPL_BUILD */ |
| .align 5 |
| undefined_instruction: |
| get_bad_stack |
| bad_save_user_regs |
| bl do_undefined_instruction |
| |
| .align 5 |
| software_interrupt: |
| get_bad_stack_swi |
| bad_save_user_regs |
| bl do_software_interrupt |
| |
| .align 5 |
| prefetch_abort: |
| get_bad_stack |
| bad_save_user_regs |
| bl do_prefetch_abort |
| |
| .align 5 |
| data_abort: |
| get_bad_stack |
| bad_save_user_regs |
| bl do_data_abort |
| |
| .align 5 |
| not_used: |
| get_bad_stack |
| bad_save_user_regs |
| bl do_not_used |
| |
| #ifdef CONFIG_USE_IRQ |
| |
| .align 5 |
| irq: |
| get_irq_stack |
| irq_save_user_regs |
| bl do_irq |
| irq_restore_user_regs |
| |
| .align 5 |
| fiq: |
| get_fiq_stack |
| /* someone ought to write a more effiction fiq_save_user_regs */ |
| irq_save_user_regs |
| bl do_fiq |
| irq_restore_user_regs |
| |
| #else |
| |
| .align 5 |
| irq: |
| get_bad_stack |
| bad_save_user_regs |
| bl do_irq |
| |
| .align 5 |
| fiq: |
| get_bad_stack |
| bad_save_user_regs |
| bl do_fiq |
| |
| #endif |
| .align 5 |
| #endif /* CONFIG_SPL_BUILD */ |
| |
| |
| /* |
| * Enable MMU to use DCache as DRAM. |
| * |
| * This is useful on PXA25x and PXA26x in early bootstages, where there is no |
| * other possible memory available to hold stack. |
| */ |
| #ifdef CONFIG_CPU_PXA25X |
| .macro CPWAIT reg |
| mrc p15, 0, \reg, c2, c0, 0 |
| mov \reg, \reg |
| sub pc, pc, #4 |
| .endm |
| lock_cache_for_stack: |
| /* Domain access -- enable for all CPs */ |
| ldr r0, =0x0000ffff |
| mcr p15, 0, r0, c3, c0, 0 |
| |
| /* Point TTBR to MMU table */ |
| ldr r0, =mmutable |
| mcr p15, 0, r0, c2, c0, 0 |
| |
| /* Kick in MMU, ICache, DCache, BTB */ |
| mrc p15, 0, r0, c1, c0, 0 |
| bic r0, #0x1b00 |
| bic r0, #0x0087 |
| orr r0, #0x1800 |
| orr r0, #0x0005 |
| mcr p15, 0, r0, c1, c0, 0 |
| CPWAIT r0 |
| |
| /* Unlock Icache, Dcache */ |
| mcr p15, 0, r0, c9, c1, 1 |
| mcr p15, 0, r0, c9, c2, 1 |
| |
| /* Flush Icache, Dcache, BTB */ |
| mcr p15, 0, r0, c7, c7, 0 |
| |
| /* Unlock I-TLB, D-TLB */ |
| mcr p15, 0, r0, c10, c4, 1 |
| mcr p15, 0, r0, c10, c8, 1 |
| |
| /* Flush TLB */ |
| mcr p15, 0, r0, c8, c7, 0 |
| |
| /* Allocate 4096 bytes of Dcache as RAM */ |
| |
| /* Drain pending loads and stores */ |
| mcr p15, 0, r0, c7, c10, 4 |
| |
| mov r4, #0x00 |
| mov r5, #0x00 |
| mov r2, #0x01 |
| mcr p15, 0, r0, c9, c2, 0 |
| CPWAIT r0 |
| |
| /* 128 lines reserved (128 x 32bytes = 4096 bytes total) */ |
| mov r0, #128 |
| ldr r1, =0xfffff000 |
| |
| alloc: |
| mcr p15, 0, r1, c7, c2, 5 |
| /* Drain pending loads and stores */ |
| mcr p15, 0, r0, c7, c10, 4 |
| strd r4, [r1], #8 |
| strd r4, [r1], #8 |
| strd r4, [r1], #8 |
| strd r4, [r1], #8 |
| subs r0, #0x01 |
| bne alloc |
| /* Drain pending loads and stores */ |
| mcr p15, 0, r0, c7, c10, 4 |
| mov r2, #0x00 |
| mcr p15, 0, r2, c9, c2, 0 |
| CPWAIT r0 |
| |
| mov pc, lr |
| |
| .section .mmutable, "a" |
| mmutable: |
| .align 14 |
| /* 0x00000000 - 0xffe00000 : 1:1, uncached mapping */ |
| .set __base, 0 |
| .rept 0xfff |
| .word (__base << 20) | 0xc12 |
| .set __base, __base + 1 |
| .endr |
| |
| /* 0xfff00000 : 1:1, cached mapping */ |
| .word (0xfff << 20) | 0x1c1e |
| #endif /* CONFIG_CPU_PXA25X */ |