| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2016 Beniamino Galvani <b.galvani@gmail.com> |
| */ |
| |
| #include <common.h> |
| #include <linux/libfdt.h> |
| #include <linux/err.h> |
| #include <asm/arch/gx.h> |
| #include <asm/arch/sm.h> |
| #include <asm/armv8/mmu.h> |
| #include <asm/unaligned.h> |
| #include <linux/sizes.h> |
| #include <efi_loader.h> |
| #include <asm/io.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| int dram_init(void) |
| { |
| const fdt64_t *val; |
| int offset; |
| int len; |
| |
| offset = fdt_path_offset(gd->fdt_blob, "/memory"); |
| if (offset < 0) |
| return -EINVAL; |
| |
| val = fdt_getprop(gd->fdt_blob, offset, "reg", &len); |
| if (len < sizeof(*val) * 2) |
| return -EINVAL; |
| |
| /* Use unaligned access since cache is still disabled */ |
| gd->ram_size = get_unaligned_be64(&val[1]); |
| |
| return 0; |
| } |
| |
| phys_size_t get_effective_memsize(void) |
| { |
| /* Size is reported in MiB, convert it in bytes */ |
| return ((readl(GX_AO_SEC_GP_CFG0) & GX_AO_MEM_SIZE_MASK) |
| >> GX_AO_MEM_SIZE_SHIFT) * SZ_1M; |
| } |
| |
| static void meson_board_add_reserved_memory(void *fdt, u64 start, u64 size) |
| { |
| int ret; |
| |
| ret = fdt_add_mem_rsv(fdt, start, size); |
| if (ret) |
| printf("Could not reserve zone @ 0x%llx\n", start); |
| |
| if (IS_ENABLED(CONFIG_EFI_LOADER)) { |
| efi_add_memory_map(start, |
| ALIGN(size, EFI_PAGE_SIZE) >> EFI_PAGE_SHIFT, |
| EFI_RESERVED_MEMORY_TYPE, false); |
| } |
| } |
| |
| void meson_gx_init_reserved_memory(void *fdt) |
| { |
| u64 bl31_size, bl31_start; |
| u64 bl32_size, bl32_start; |
| u32 reg; |
| |
| /* |
| * Get ARM Trusted Firmware reserved memory zones in : |
| * - AO_SEC_GP_CFG3: bl32 & bl31 size in KiB, can be 0 |
| * - AO_SEC_GP_CFG5: bl31 physical start address, can be NULL |
| * - AO_SEC_GP_CFG4: bl32 physical start address, can be NULL |
| */ |
| |
| reg = readl(GX_AO_SEC_GP_CFG3); |
| |
| bl31_size = ((reg & GX_AO_BL31_RSVMEM_SIZE_MASK) |
| >> GX_AO_BL31_RSVMEM_SIZE_SHIFT) * SZ_1K; |
| bl32_size = (reg & GX_AO_BL32_RSVMEM_SIZE_MASK) * SZ_1K; |
| |
| bl31_start = readl(GX_AO_SEC_GP_CFG5); |
| bl32_start = readl(GX_AO_SEC_GP_CFG4); |
| |
| /* |
| * Early Meson GX Firmware revisions did not provide the reserved |
| * memory zones in the registers, keep fixed memory zone handling. |
| */ |
| if (IS_ENABLED(CONFIG_MESON_GX) && |
| !reg && !bl31_start && !bl32_start) { |
| bl31_start = 0x10000000; |
| bl31_size = 0x200000; |
| } |
| |
| /* Add first 16MiB reserved zone */ |
| meson_board_add_reserved_memory(fdt, 0, GX_FIRMWARE_MEM_SIZE); |
| |
| /* Add BL31 reserved zone */ |
| if (bl31_start && bl31_size) |
| meson_board_add_reserved_memory(fdt, bl31_start, bl31_size); |
| |
| /* Add BL32 reserved zone */ |
| if (bl32_start && bl32_size) |
| meson_board_add_reserved_memory(fdt, bl32_start, bl32_size); |
| } |
| |
| void reset_cpu(ulong addr) |
| { |
| psci_system_reset(); |
| } |
| |
| static struct mm_region gx_mem_map[] = { |
| { |
| .virt = 0x0UL, |
| .phys = 0x0UL, |
| .size = 0xc0000000UL, |
| .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | |
| PTE_BLOCK_INNER_SHARE |
| }, { |
| .virt = 0xc0000000UL, |
| .phys = 0xc0000000UL, |
| .size = 0x30000000UL, |
| .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | |
| PTE_BLOCK_NON_SHARE | |
| PTE_BLOCK_PXN | PTE_BLOCK_UXN |
| }, { |
| /* List terminator */ |
| 0, |
| } |
| }; |
| |
| struct mm_region *mem_map = gx_mem_map; |