| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2019 Google LLC |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <i2c.h> |
| #include <log.h> |
| #include <acpi/acpi_device.h> |
| #include <acpi/acpigen.h> |
| #include <acpi/acpi_dp.h> |
| #ifdef CONFIG_X86 |
| #include <asm/intel_pinctrl_defs.h> |
| #endif |
| #include <asm-generic/gpio.h> |
| #include <dm/acpi.h> |
| |
| static bool acpi_i2c_add_gpios_to_crs(struct acpi_i2c_priv *priv) |
| { |
| /* |
| * Return false if: |
| * 1. Request to explicitly disable export of GPIOs in CRS, or |
| * 2. Both reset and enable GPIOs are not provided. |
| */ |
| if (priv->disable_gpio_export_in_crs || |
| (!dm_gpio_is_valid(&priv->reset_gpio) && |
| !dm_gpio_is_valid(&priv->enable_gpio))) |
| return false; |
| |
| return true; |
| } |
| |
| static int acpi_i2c_write_gpio(struct acpi_ctx *ctx, struct gpio_desc *gpio, |
| int *curindex) |
| { |
| int ret; |
| |
| if (!dm_gpio_is_valid(gpio)) |
| return -ENOENT; |
| |
| acpi_device_write_gpio_desc(ctx, gpio); |
| ret = *curindex; |
| (*curindex)++; |
| |
| return ret; |
| } |
| |
| int acpi_i2c_fill_ssdt(const struct udevice *dev, struct acpi_ctx *ctx) |
| { |
| int reset_gpio_index = -1, enable_gpio_index = -1, irq_gpio_index = -1; |
| enum i2c_device_t type = dev_get_driver_data(dev); |
| struct acpi_i2c_priv *priv = dev_get_priv(dev); |
| struct acpi_dp *dsd = NULL; |
| char scope[ACPI_PATH_MAX]; |
| char name[ACPI_NAME_MAX]; |
| int tx_state_val; |
| int curindex = 0; |
| int ret; |
| |
| #ifdef CONFIG_X86 |
| tx_state_val = PAD_CFG0_TX_STATE; |
| #elif defined(CONFIG_SANDBOX) |
| tx_state_val = BIT(7); /* test value */ |
| #else |
| #error "Not supported on this architecture" |
| #endif |
| ret = acpi_get_name(dev, name); |
| if (ret) |
| return log_msg_ret("name", ret); |
| ret = acpi_device_scope(dev, scope, sizeof(scope)); |
| if (ret) |
| return log_msg_ret("scope", ret); |
| |
| /* Device */ |
| acpigen_write_scope(ctx, scope); |
| acpigen_write_device(ctx, name); |
| acpigen_write_name_string(ctx, "_HID", priv->hid); |
| if (type == I2C_DEVICE_HID_OVER_I2C) |
| acpigen_write_name_string(ctx, "_CID", "PNP0C50"); |
| acpigen_write_name_integer(ctx, "_UID", priv->uid); |
| acpigen_write_name_string(ctx, "_DDN", priv->desc); |
| acpigen_write_sta(ctx, acpi_device_status(dev)); |
| |
| /* Resources */ |
| acpigen_write_name(ctx, "_CRS"); |
| acpigen_write_resourcetemplate_header(ctx); |
| acpi_device_write_i2c_dev(ctx, dev); |
| |
| /* Use either Interrupt() or GpioInt() */ |
| if (dm_gpio_is_valid(&priv->irq_gpio)) { |
| irq_gpio_index = acpi_i2c_write_gpio(ctx, &priv->irq_gpio, |
| &curindex); |
| } else { |
| ret = acpi_device_write_interrupt_irq(ctx, &priv->irq); |
| if (ret < 0) |
| return log_msg_ret("irq", ret); |
| } |
| |
| if (acpi_i2c_add_gpios_to_crs(priv)) { |
| reset_gpio_index = acpi_i2c_write_gpio(ctx, &priv->reset_gpio, |
| &curindex); |
| enable_gpio_index = acpi_i2c_write_gpio(ctx, &priv->enable_gpio, |
| &curindex); |
| } |
| acpigen_write_resourcetemplate_footer(ctx); |
| |
| /* Wake capabilities */ |
| if (priv->wake) { |
| acpigen_write_name_integer(ctx, "_S0W", 4); |
| acpigen_write_prw(ctx, priv->wake, 3); |
| } |
| |
| /* DSD */ |
| if (priv->probed || priv->property_count || priv->compat_string || |
| reset_gpio_index >= 0 || enable_gpio_index >= 0 || |
| irq_gpio_index >= 0) { |
| char path[ACPI_PATH_MAX]; |
| |
| ret = acpi_device_path(dev, path, sizeof(path)); |
| if (ret) |
| return log_msg_ret("path", ret); |
| |
| dsd = acpi_dp_new_table("_DSD"); |
| if (priv->compat_string) |
| acpi_dp_add_string(dsd, "compatible", |
| priv->compat_string); |
| if (priv->probed) |
| acpi_dp_add_integer(dsd, "linux,probed", 1); |
| if (irq_gpio_index >= 0) |
| acpi_dp_add_gpio(dsd, "irq-gpios", path, |
| irq_gpio_index, 0, |
| priv->irq_gpio.flags & |
| GPIOD_ACTIVE_LOW ? |
| ACPI_GPIO_ACTIVE_LOW : 0); |
| if (reset_gpio_index >= 0) |
| acpi_dp_add_gpio(dsd, "reset-gpios", path, |
| reset_gpio_index, 0, |
| priv->reset_gpio.flags & |
| GPIOD_ACTIVE_LOW ? |
| ACPI_GPIO_ACTIVE_LOW : 0); |
| if (enable_gpio_index >= 0) |
| acpi_dp_add_gpio(dsd, "enable-gpios", path, |
| enable_gpio_index, 0, |
| priv->enable_gpio.flags & |
| GPIOD_ACTIVE_LOW ? |
| ACPI_GPIO_ACTIVE_LOW : 0); |
| /* Generic property list is not supported */ |
| acpi_dp_write(ctx, dsd); |
| } |
| |
| /* Power Resource */ |
| if (priv->has_power_resource) { |
| ret = acpi_device_add_power_res(ctx, tx_state_val, |
| "\\_SB.GPC0", "\\_SB.SPC0", |
| &priv->reset_gpio, priv->reset_delay_ms, |
| priv->reset_off_delay_ms, &priv->enable_gpio, |
| priv->enable_delay_ms, priv->enable_off_delay_ms, |
| &priv->stop_gpio, priv->stop_delay_ms, |
| priv->stop_off_delay_ms); |
| if (ret) |
| return log_msg_ret("power", ret); |
| } |
| if (priv->hid_desc_reg_offset) { |
| ret = acpi_device_write_dsm_i2c_hid(ctx, |
| priv->hid_desc_reg_offset); |
| if (ret) |
| return log_msg_ret("dsm", ret); |
| } |
| |
| acpigen_pop_len(ctx); /* Device */ |
| acpigen_pop_len(ctx); /* Scope */ |
| |
| return 0; |
| } |
| |
| int acpi_i2c_ofdata_to_platdata(struct udevice *dev) |
| { |
| struct acpi_i2c_priv *priv = dev_get_priv(dev); |
| |
| gpio_request_by_name(dev, "reset-gpios", 0, &priv->reset_gpio, |
| GPIOD_IS_OUT); |
| gpio_request_by_name(dev, "enable-gpios", 0, &priv->enable_gpio, |
| GPIOD_IS_OUT); |
| gpio_request_by_name(dev, "irq-gpios", 0, &priv->irq_gpio, GPIOD_IS_IN); |
| gpio_request_by_name(dev, "stop-gpios", 0, &priv->stop_gpio, |
| GPIOD_IS_OUT); |
| irq_get_by_index(dev, 0, &priv->irq); |
| priv->hid = dev_read_string(dev, "acpi,hid"); |
| if (!priv->hid) |
| return log_msg_ret("hid", -EINVAL); |
| dev_read_u32(dev, "acpi,uid", &priv->uid); |
| priv->desc = dev_read_string(dev, "acpi,ddn"); |
| dev_read_u32(dev, "acpi,wake", &priv->wake); |
| priv->probed = dev_read_bool(dev, "linux,probed"); |
| priv->compat_string = dev_read_string(dev, "acpi,compatible"); |
| priv->has_power_resource = dev_read_bool(dev, |
| "acpi,has-power-resource"); |
| dev_read_u32(dev, "hid-descr-addr", &priv->hid_desc_reg_offset); |
| dev_read_u32(dev, "reset-delay-ms", &priv->reset_delay_ms); |
| dev_read_u32(dev, "reset-off-delay-ms", &priv->reset_off_delay_ms); |
| dev_read_u32(dev, "enable-delay-ms", &priv->enable_delay_ms); |
| dev_read_u32(dev, "enable-off-delay-ms", &priv->enable_off_delay_ms); |
| dev_read_u32(dev, "stop-delay-ms", &priv->stop_delay_ms); |
| dev_read_u32(dev, "stop-off-delay-ms", &priv->stop_off_delay_ms); |
| |
| return 0; |
| } |
| |
| /* Use name specified in priv or build one from I2C address */ |
| static int acpi_i2c_get_name(const struct udevice *dev, char *out_name) |
| { |
| struct dm_i2c_chip *chip = dev_get_parent_platdata(dev); |
| struct acpi_i2c_priv *priv = dev_get_priv(dev); |
| |
| snprintf(out_name, ACPI_NAME_MAX, |
| priv->hid_desc_reg_offset ? "H%03X" : "D%03X", |
| chip->chip_addr); |
| |
| return 0; |
| } |
| |
| struct acpi_ops acpi_i2c_ops = { |
| .fill_ssdt = acpi_i2c_fill_ssdt, |
| .get_name = acpi_i2c_get_name, |
| }; |