| /* |
| * (C) Copyright 2000-2002 Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * (C) Copyright 2003 Martin Winistoerfer, martinwinistoerfer@gmx.ch. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| /* |
| * File: interrupt.c |
| * |
| * Discription: Contains interrupt routines needed by U-Boot |
| * |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <mpc5xx.h> |
| #include <asm/processor.h> |
| |
| #if defined(CONFIG_PATI) |
| /* PATI uses IRQs for PCI doorbell */ |
| #undef NR_IRQS |
| #define NR_IRQS 16 |
| #endif |
| |
| struct interrupt_action { |
| interrupt_handler_t *handler; |
| void *arg; |
| int count; |
| }; |
| |
| static struct interrupt_action irq_vecs[NR_IRQS]; |
| |
| /* |
| * Initialise interrupts |
| */ |
| |
| int interrupt_init_cpu (ulong *decrementer_count) |
| { |
| volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; |
| int vec; |
| |
| /* Decrementer used here for status led */ |
| *decrementer_count = get_tbclk () / CONFIG_SYS_HZ; |
| |
| /* Disable all interrupts */ |
| immr->im_siu_conf.sc_simask = 0; |
| for (vec=0; vec<NR_IRQS; vec++) { |
| irq_vecs[vec].handler = NULL; |
| irq_vecs[vec].arg = NULL; |
| irq_vecs[vec].count = 0; |
| } |
| |
| return (0); |
| } |
| |
| /* |
| * Handle external interrupts |
| */ |
| void external_interrupt (struct pt_regs *regs) |
| { |
| volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; |
| int irq; |
| ulong simask, newmask; |
| ulong vec, v_bit; |
| |
| /* |
| * read the SIVEC register and shift the bits down |
| * to get the irq number |
| */ |
| vec = immr->im_siu_conf.sc_sivec; |
| irq = vec >> 26; |
| v_bit = 0x80000000UL >> irq; |
| |
| /* |
| * Read Interrupt Mask Register and Mask Interrupts |
| */ |
| simask = immr->im_siu_conf.sc_simask; |
| newmask = simask & (~(0xFFFF0000 >> irq)); |
| immr->im_siu_conf.sc_simask = newmask; |
| |
| if (!(irq & 0x1)) { /* External Interrupt ? */ |
| ulong siel; |
| |
| /* |
| * Read Interrupt Edge/Level Register |
| */ |
| siel = immr->im_siu_conf.sc_siel; |
| |
| if (siel & v_bit) { /* edge triggered interrupt ? */ |
| /* |
| * Rewrite SIPEND Register to clear interrupt |
| */ |
| immr->im_siu_conf.sc_sipend = v_bit; |
| } |
| } |
| |
| if (irq_vecs[irq].handler != NULL) { |
| irq_vecs[irq].handler (irq_vecs[irq].arg); |
| } else { |
| printf ("\nBogus External Interrupt IRQ %d Vector %ld\n", |
| irq, vec); |
| /* turn off the bogus interrupt to avoid it from now */ |
| simask &= ~v_bit; |
| } |
| /* |
| * Re-Enable old Interrupt Mask |
| */ |
| immr->im_siu_conf.sc_simask = simask; |
| } |
| |
| /* |
| * Install and free an interrupt handler |
| */ |
| void irq_install_handler (int vec, interrupt_handler_t * handler, |
| void *arg) |
| { |
| volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; |
| /* SIU interrupt */ |
| if (irq_vecs[vec].handler != NULL) { |
| printf ("SIU interrupt %d 0x%x\n", |
| vec, |
| (uint) handler); |
| } |
| irq_vecs[vec].handler = handler; |
| irq_vecs[vec].arg = arg; |
| immr->im_siu_conf.sc_simask |= 1 << (31 - vec); |
| #if 0 |
| printf ("Install SIU interrupt for vector %d ==> %p\n", |
| vec, handler); |
| #endif |
| } |
| |
| void irq_free_handler (int vec) |
| { |
| volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; |
| /* SIU interrupt */ |
| #if 0 |
| printf ("Free CPM interrupt for vector %d\n", |
| vec); |
| #endif |
| immr->im_siu_conf.sc_simask &= ~(1 << (31 - vec)); |
| irq_vecs[vec].handler = NULL; |
| irq_vecs[vec].arg = NULL; |
| } |
| |
| /* |
| * Timer interrupt - gets called when bit 0 of DEC changes from |
| * 0. Decrementer is enabled with bit TBE in TBSCR. |
| */ |
| void timer_interrupt_cpu (struct pt_regs *regs) |
| { |
| volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; |
| |
| #if 0 |
| printf ("*** Timer Interrupt *** "); |
| #endif |
| /* Reset Timer Status Bit and Timers Interrupt Status */ |
| immr->im_clkrstk.cark_plprcrk = KAPWR_KEY; |
| __asm__ ("nop"); |
| immr->im_clkrst.car_plprcr |= PLPRCR_TEXPS | PLPRCR_TMIST; |
| |
| return; |
| } |
| |
| #if defined(CONFIG_CMD_IRQ) |
| /******************************************************************************* |
| * |
| * irqinfo - print information about IRQs |
| * |
| */ |
| int do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| int vec; |
| |
| printf ("\nInterrupt-Information:\n"); |
| printf ("Nr Routine Arg Count\n"); |
| |
| for (vec=0; vec<NR_IRQS; vec++) { |
| if (irq_vecs[vec].handler != NULL) { |
| printf ("%02d %08lx %08lx %d\n", |
| vec, |
| (ulong)irq_vecs[vec].handler, |
| (ulong)irq_vecs[vec].arg, |
| irq_vecs[vec].count); |
| } |
| } |
| return 0; |
| } |
| |
| |
| #endif |