| /* |
| * Copyright 2016 - Vikas Manocha <vikas.manocha@st.com> |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| /dts-v1/; |
| #include "stm32f746.dtsi" |
| #include <dt-bindings/memory/stm32-sdram.h> |
| #include <dt-bindings/gpio/gpio.h> |
| |
| / { |
| model = "STMicroelectronics STM32F769-DISCO board"; |
| compatible = "st,stm32f769-disco", "st,stm32f7"; |
| |
| chosen { |
| bootargs = "root=/dev/ram rdinit=/linuxrc"; |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| memory { |
| reg = <0xC0000000 0x1000000>; |
| }; |
| |
| aliases { |
| serial0 = &usart1; |
| spi0 = &qspi; |
| mmc0 = &sdio2; |
| /* Aliases for gpios so as to use sequence */ |
| gpio0 = &gpioa; |
| gpio1 = &gpiob; |
| gpio2 = &gpioc; |
| gpio3 = &gpiod; |
| gpio4 = &gpioe; |
| gpio5 = &gpiof; |
| gpio6 = &gpiog; |
| gpio7 = &gpioh; |
| gpio8 = &gpioi; |
| gpio9 = &gpioj; |
| gpio10 = &gpiok; |
| }; |
| |
| led1 { |
| compatible = "st,led1"; |
| led-gpio = <&gpioj 5 0>; |
| }; |
| |
| button1 { |
| compatible = "st,button1"; |
| button-gpio = <&gpioa 0 0>; |
| }; |
| }; |
| |
| &clk_hse { |
| clock-frequency = <25000000>; |
| }; |
| |
| &pinctrl { |
| usart1_pins_a: usart1@0 { |
| pins1 { |
| pinmux = <STM32F746_PA9_FUNC_USART1_TX>; |
| bias-disable; |
| drive-push-pull; |
| slew-rate = <2>; |
| }; |
| pins2 { |
| pinmux = <STM32F746_PA10_FUNC_USART1_RX>; |
| bias-disable; |
| }; |
| }; |
| |
| ethernet_mii: mii@0 { |
| pins { |
| pinmux = <STM32F746_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>, |
| <STM32F746_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>, |
| <STM32F746_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>, |
| <STM32F746_PA2_FUNC_ETH_MDIO>, |
| <STM32F746_PC1_FUNC_ETH_MDC>, |
| <STM32F746_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>, |
| <STM32F746_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>, |
| <STM32F746_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>, |
| <STM32F746_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>; |
| slew-rate = <2>; |
| }; |
| }; |
| |
| qspi_pins: qspi@0 { |
| pins { |
| pinmux = <STM32F746_PB2_FUNC_QUADSPI_CLK>, |
| <STM32F746_PB6_FUNC_QUADSPI_BK1_NCS>, |
| <STM32F746_PC9_FUNC_QUADSPI_BK1_IO0>, |
| <STM32F746_PC10_FUNC_QUADSPI_BK1_IO1>, |
| <STM32F746_PD13_FUNC_QUADSPI_BK1_IO3>, |
| <STM32F746_PE2_FUNC_QUADSPI_BK1_IO2>; |
| slew-rate = <2>; |
| }; |
| }; |
| |
| fmc_pins: fmc@0 { |
| pins { |
| pinmux = <STM32F746_PI10_FUNC_FMC_D31>, |
| <STM32F746_PI9_FUNC_FMC_D30>, |
| <STM32F746_PI7_FUNC_FMC_D29>, |
| <STM32F746_PI6_FUNC_FMC_D28>, |
| <STM32F746_PI3_FUNC_FMC_D27>, |
| <STM32F746_PI2_FUNC_FMC_D26>, |
| <STM32F746_PI1_FUNC_FMC_D25>, |
| <STM32F746_PI0_FUNC_FMC_D24>, |
| <STM32F746_PH15_FUNC_FMC_D23>, |
| <STM32F746_PH14_FUNC_FMC_D22>, |
| <STM32F746_PH13_FUNC_FMC_D21>, |
| <STM32F746_PH12_FUNC_FMC_D20>, |
| <STM32F746_PH11_FUNC_FMC_D19>, |
| <STM32F746_PH10_FUNC_FMC_D18>, |
| <STM32F746_PH9_FUNC_FMC_D17>, |
| <STM32F746_PH8_FUNC_FMC_D16>, |
| |
| <STM32F746_PD10_FUNC_FMC_D15>, |
| <STM32F746_PD9_FUNC_FMC_D14>, |
| <STM32F746_PD8_FUNC_FMC_D13>, |
| <STM32F746_PE15_FUNC_FMC_D12>, |
| <STM32F746_PE14_FUNC_FMC_D11>, |
| <STM32F746_PE13_FUNC_FMC_D10>, |
| <STM32F746_PE12_FUNC_FMC_D9>, |
| <STM32F746_PE11_FUNC_FMC_D8>, |
| <STM32F746_PE10_FUNC_FMC_D7>, |
| <STM32F746_PE9_FUNC_FMC_D6>, |
| <STM32F746_PE8_FUNC_FMC_D5>, |
| <STM32F746_PE7_FUNC_FMC_D4>, |
| <STM32F746_PD1_FUNC_FMC_D3>, |
| <STM32F746_PD0_FUNC_FMC_D2>, |
| <STM32F746_PD15_FUNC_FMC_D1>, |
| <STM32F746_PD14_FUNC_FMC_D0>, |
| |
| <STM32F746_PI5_FUNC_FMC_NBL3>, |
| <STM32F746_PI4_FUNC_FMC_NBL2>, |
| <STM32F746_PE1_FUNC_FMC_NBL1>, |
| <STM32F746_PE0_FUNC_FMC_NBL0>, |
| |
| <STM32F746_PG5_FUNC_FMC_A15_FMC_BA1>, |
| <STM32F746_PG4_FUNC_FMC_A14_FMC_BA0>, |
| |
| <STM32F746_PG1_FUNC_FMC_A11>, |
| <STM32F746_PG0_FUNC_FMC_A10>, |
| <STM32F746_PF15_FUNC_FMC_A9>, |
| <STM32F746_PF14_FUNC_FMC_A8>, |
| <STM32F746_PF13_FUNC_FMC_A7>, |
| <STM32F746_PF12_FUNC_FMC_A6>, |
| <STM32F746_PF5_FUNC_FMC_A5>, |
| <STM32F746_PF4_FUNC_FMC_A4>, |
| <STM32F746_PF3_FUNC_FMC_A3>, |
| <STM32F746_PF2_FUNC_FMC_A2>, |
| <STM32F746_PF1_FUNC_FMC_A1>, |
| <STM32F746_PF0_FUNC_FMC_A0>, |
| |
| <STM32F746_PH3_FUNC_FMC_SDNE0>, |
| <STM32F746_PH5_FUNC_FMC_SDNWE>, |
| <STM32F746_PF11_FUNC_FMC_SDNRAS>, |
| <STM32F746_PG15_FUNC_FMC_SDNCAS>, |
| <STM32F746_PH2_FUNC_FMC_SDCKE0>, |
| <STM32F746_PG8_FUNC_FMC_SDCLK>; |
| slew-rate = <2>; |
| }; |
| }; |
| }; |
| |
| &usart1 { |
| pinctrl-0 = <&usart1_pins_a>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &fmc { |
| pinctrl-0 = <&fmc_pins>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| |
| /* Memory configuration from sdram datasheet MT48LC_4M32_B2B5-6A */ |
| bank1: bank@0 { |
| st,sdram-control = /bits/ 8 <NO_COL_8 NO_ROW_12 MWIDTH_32 BANKS_4 |
| CAS_3 SDCLK_2 RD_BURST_EN |
| RD_PIPE_DL_0>; |
| st,sdram-timing = /bits/ 8 <TMRD_2 TXSR_6 TRAS_4 TRC_6 TWR_2 |
| TRP_2 TRCD_2>; |
| /* refcount = (64msec/total_row_sdram)*freq - 20 */ |
| st,sdram-refcount = < 1542 >; |
| }; |
| }; |
| |
| &mac { |
| status = "okay"; |
| pinctrl-0 = <ðernet_mii>; |
| phy-mode = "rmii"; |
| phy-handle = <&phy0>; |
| |
| mdio0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,dwmac-mdio"; |
| phy0: ethernet-phy@0 { |
| reg = <0>; |
| }; |
| }; |
| }; |
| |
| &qspi { |
| pinctrl-0 = <&qspi_pins>; |
| status = "okay"; |
| |
| qflash0: n25q128a { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "micron,n25q128a13", "spi-flash"; |
| spi-max-frequency = <108000000>; |
| spi-tx-bus-width = <1>; |
| spi-rx-bus-width = <1>; |
| memory-map = <0x90000000 0x1000000>; |
| reg = <0>; |
| }; |
| }; |
| |
| &sdio2 { |
| status = "okay"; |
| cd-gpios = <&gpioi 15 GPIO_ACTIVE_LOW>; |
| pinctrl-names = "default", "opendrain"; |
| pinctrl-0 = <&sdio_pins_b>; |
| pinctrl-1 = <&sdio_pins_od_b>; |
| bus-width = <4>; |
| max-frequency = <25000000>; |
| }; |