blob: ae23814bbf3b650e7a28d0753ba67f8b8d6a0cfb [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Andy Fleming <afleming@gmail.com>
*
* This file pretty much stolen from Linux's mii.h/ethtool.h/phy.h
*/
#ifndef _PHY_H
#define _PHY_H
#include <asm-generic/gpio.h>
#include <log.h>
#include <phy_interface.h>
#include <dm/ofnode.h>
#include <dm/read.h>
#include <linux/errno.h>
#include <linux/list.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/mdio.h>
struct udevice;
#define PHY_FIXED_ID 0xa5a55a5a
#define PHY_NCSI_ID 0xbeefcafe
/*
* There is no actual id for this.
* This is just a dummy id for gmii2rgmmi converter.
*/
#define PHY_GMII2RGMII_ID 0x5a5a5a5a
#define PHY_MAX_ADDR 32
#define PHY_FLAG_BROKEN_RESET (1 << 0) /* soft reset not supported */
#define PHY_DEFAULT_FEATURES (SUPPORTED_Autoneg | \
SUPPORTED_TP | \
SUPPORTED_MII)
#define PHY_10BT_FEATURES (SUPPORTED_10baseT_Half | \
SUPPORTED_10baseT_Full)
#define PHY_100BT_FEATURES (SUPPORTED_100baseT_Half | \
SUPPORTED_100baseT_Full)
#define PHY_1000BT_FEATURES (SUPPORTED_1000baseT_Half | \
SUPPORTED_1000baseT_Full)
#define PHY_BASIC_FEATURES (PHY_10BT_FEATURES | \
PHY_100BT_FEATURES | \
PHY_DEFAULT_FEATURES)
#define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \
PHY_1000BT_FEATURES)
#define PHY_10G_FEATURES (PHY_GBIT_FEATURES | \
SUPPORTED_10000baseT_Full)
#ifndef PHY_ANEG_TIMEOUT
#define PHY_ANEG_TIMEOUT 4000
#endif
struct phy_device;
#define MDIO_NAME_LEN 32
struct mii_dev {
struct list_head link;
char name[MDIO_NAME_LEN];
void *priv;
int (*read)(struct mii_dev *bus, int addr, int devad, int reg);
int (*write)(struct mii_dev *bus, int addr, int devad, int reg,
u16 val);
int (*reset)(struct mii_dev *bus);
struct phy_device *phymap[PHY_MAX_ADDR];
u32 phy_mask;
/** @reset_delay_us: Bus GPIO reset pulse width in microseconds */
int reset_delay_us;
/** @reset_post_delay_us: Bus GPIO reset deassert delay in microseconds */
int reset_post_delay_us;
/** @reset_gpiod: Bus Reset GPIO descriptor pointer */
struct gpio_desc reset_gpiod;
};
/* struct phy_driver: a structure which defines PHY behavior
*
* uid will contain a number which represents the PHY. During
* startup, the driver will poll the PHY to find out what its
* UID--as defined by registers 2 and 3--is. The 32-bit result
* gotten from the PHY will be masked to
* discard any bits which may change based on revision numbers
* unimportant to functionality
*
*/
struct phy_driver {
char *name;
unsigned int uid;
unsigned int mask;
unsigned int mmds;
u32 features;
/* Called to do any driver startup necessities */
/* Will be called during phy_connect */
int (*probe)(struct phy_device *phydev);
/* Called to configure the PHY, and modify the controller
* based on the results. Should be called after phy_connect */
int (*config)(struct phy_device *phydev);
/* Called when starting up the controller */
int (*startup)(struct phy_device *phydev);
/* Called when bringing down the controller */
int (*shutdown)(struct phy_device *phydev);
int (*readext)(struct phy_device *phydev, int addr, int devad, int reg);
int (*writeext)(struct phy_device *phydev, int addr, int devad, int reg,
u16 val);
/* Phy specific driver override for reading a MMD register */
int (*read_mmd)(struct phy_device *phydev, int devad, int reg);
/* Phy specific driver override for writing a MMD register */
int (*write_mmd)(struct phy_device *phydev, int devad, int reg,
u16 val);
/* driver private data */
ulong data;
};
struct phy_device {
/* Information about the PHY type */
/* And management functions */
struct mii_dev *bus;
struct phy_driver *drv;
void *priv;
struct udevice *dev;
ofnode node;
/* forced speed & duplex (no autoneg)
* partner speed & duplex & pause (autoneg)
*/
int speed;
int duplex;
/* The most recently read link state */
int link;
int port;
phy_interface_t interface;
u32 advertising;
u32 supported;
u32 mmds;
int autoneg;
int addr;
int pause;
int asym_pause;
u32 phy_id;
bool is_c45;
u32 flags;
};
struct fixed_link {
int phy_id;
int duplex;
int link_speed;
int pause;
int asym_pause;
};
/**
* phy_reset() - Resets the specified PHY
* Issues a reset of the PHY and waits for it to complete
*
* @phydev: PHY to reset
* @return: 0 if OK, -ve on error
*/
int phy_reset(struct phy_device *phydev);
/**
* phy_find_by_mask() - Searches for a PHY on the specified MDIO bus
* The function checks the PHY addresses flagged in phy_mask and returns a
* phy_device pointer if it detects a PHY.
* This function should only be called if just one PHY is expected to be present
* in the set of addresses flagged in phy_mask. If multiple PHYs are present,
* it is undefined which of these PHYs is returned.
*
* @bus: MII/MDIO bus to scan
* @phy_mask: bitmap of PYH addresses to scan
* @return: pointer to phy_device if a PHY is found, or NULL otherwise
*/
struct phy_device *phy_find_by_mask(struct mii_dev *bus, unsigned phy_mask);
#ifdef CONFIG_PHY_FIXED
/**
* fixed_phy_create() - create an unconnected fixed-link pseudo-PHY device
* @node: OF node for the container of the fixed-link node
*
* Description: Creates a struct phy_device based on a fixed-link of_node
* description. Can be used without phy_connect by drivers which do not expose
* a UCLASS_ETH udevice.
*/
struct phy_device *fixed_phy_create(ofnode node);
#else
static inline struct phy_device *fixed_phy_create(ofnode node)
{
return NULL;
}
#endif
/**
* phy_connect() - Creates a PHY device for the Ethernet interface
* Creates a PHY device for the PHY at the given address, if one doesn't exist
* already, and associates it with the Ethernet device.
* The function may be called with addr <= 0, in this case addr value is ignored
* and the bus is scanned to detect a PHY. Scanning should only be used if only
* one PHY is expected to be present on the MDIO bus, otherwise it is undefined
* which PHY is returned.
*
* @bus: MII/MDIO bus that hosts the PHY
* @addr: PHY address on MDIO bus
* @dev: Ethernet device to associate to the PHY
* @interface: type of MAC-PHY interface
* @return: pointer to phy_device if a PHY is found, or NULL otherwise
*/
struct phy_device *phy_connect(struct mii_dev *bus, int addr,
struct udevice *dev,
phy_interface_t interface);
/**
* phy_device_create() - Create a PHY device
*
* @bus: MII/MDIO bus that hosts the PHY
* @addr: PHY address on MDIO bus
* @phy_id: where to store the ID retrieved
* @is_c45: Device Identifiers if is_c45
* @return: pointer to phy_device if a PHY is found, or NULL otherwise
*/
struct phy_device *phy_device_create(struct mii_dev *bus, int addr,
u32 phy_id, bool is_c45);
/**
* phy_connect_phy_id() - Connect to phy device by reading PHY id
* from phy node.
*
* @bus: MII/MDIO bus that hosts the PHY
* @dev: Ethernet device to associate to the PHY
* @return: pointer to phy_device if a PHY is found,
* or NULL otherwise
*/
struct phy_device *phy_connect_phy_id(struct mii_dev *bus, struct udevice *dev,
int phyaddr);
static inline ofnode phy_get_ofnode(struct phy_device *phydev)
{
if (ofnode_valid(phydev->node))
return phydev->node;
else
return dev_ofnode(phydev->dev);
}
/**
* phy_read_mmd_poll_timeout - Periodically poll a PHY register until a
* condition is met or a timeout occurs
*
* @phydev: The phy_device struct
* @devaddr: The MMD to read from
* @regnum: The register on the MMD to read
* @val: Variable to read the register into
* @cond: Break condition (usually involving @val)
* @sleep_us: Maximum time to sleep between reads in us (0
* tight-loops). Should be less than ~20ms since usleep_range
* is used (see Documentation/timers/timers-howto.rst).
* @timeout_us: Timeout in us, 0 means never timeout
* @sleep_before_read: if it is true, sleep @sleep_us before read.
* Returns 0 on success and -ETIMEDOUT upon a timeout. In either
* case, the last read value at @args is stored in @val. Must not
* be called from atomic context if sleep_us or timeout_us are used.
*/
#define phy_read_mmd_poll_timeout(phydev, devaddr, regnum, val, cond, \
sleep_us, timeout_us, sleep_before_read) \
({ \
int __ret = read_poll_timeout(phy_read_mmd, val, (cond) || val < 0, \
sleep_us, timeout_us, \
phydev, devaddr, regnum); \
if (val < 0) \
__ret = val; \
if (__ret) \
dev_err(phydev->dev, "%s failed: %d\n", __func__, __ret); \
__ret; \
})
int phy_read(struct phy_device *phydev, int devad, int regnum);
int phy_write(struct phy_device *phydev, int devad, int regnum, u16 val);
void phy_mmd_start_indirect(struct phy_device *phydev, int devad, int regnum);
int phy_read_mmd(struct phy_device *phydev, int devad, int regnum);
int phy_write_mmd(struct phy_device *phydev, int devad, int regnum, u16 val);
int phy_set_bits_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val);
int phy_clear_bits_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val);
int phy_modify_mmd_changed(struct phy_device *phydev, int devad, u32 regnum,
u16 mask, u16 set);
int phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum,
u16 mask, u16 set);
int phy_startup(struct phy_device *phydev);
int phy_config(struct phy_device *phydev);
int phy_shutdown(struct phy_device *phydev);
int phy_set_supported(struct phy_device *phydev, u32 max_speed);
int phy_modify(struct phy_device *phydev, int devad, int regnum, u16 mask,
u16 set);
int genphy_config_aneg(struct phy_device *phydev);
int genphy_restart_aneg(struct phy_device *phydev);
int genphy_update_link(struct phy_device *phydev);
int genphy_parse_link(struct phy_device *phydev);
int genphy_config(struct phy_device *phydev);
int genphy_startup(struct phy_device *phydev);
int genphy_shutdown(struct phy_device *phydev);
int gen10g_config(struct phy_device *phydev);
int gen10g_startup(struct phy_device *phydev);
int gen10g_shutdown(struct phy_device *phydev);
int gen10g_discover_mmds(struct phy_device *phydev);
/**
* U_BOOT_PHY_DRIVER() - Declare a new U-Boot driver
* @__name: name of the driver
*/
#define U_BOOT_PHY_DRIVER(__name) \
ll_entry_declare(struct phy_driver, __name, phy_driver)
int board_phy_config(struct phy_device *phydev);
int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id);
/**
* phy_interface_is_rgmii - Convenience function for testing if a PHY interface
* is RGMII (all variants)
* @phydev: the phy_device struct
* @return: true if MII bus is RGMII or false if it is not
*/
static inline bool phy_interface_is_rgmii(struct phy_device *phydev)
{
switch (phydev->interface) {
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_TXID:
return 1;
default:
return 0;
}
}
bool phy_interface_is_ncsi(void);
/* PHY UIDs for various PHYs that are referenced in external code */
#define PHY_UID_CS4340 0x13e51002
#define PHY_UID_CS4223 0x03e57003
#define PHY_UID_TN2020 0x00a19410
#define PHY_UID_IN112525_S03 0x02107440
#endif