| CONFIG_ARM=y |
| CONFIG_ARCH_MX6=y |
| CONFIG_SYS_TEXT_BASE=0x17800000 |
| CONFIG_SPL_GPIO_SUPPORT=y |
| CONFIG_SPL_LIBCOMMON_SUPPORT=y |
| CONFIG_SPL_LIBGENERIC_SUPPORT=y |
| CONFIG_ENV_SIZE=0x2000 |
| CONFIG_ENV_OFFSET=0xFE000 |
| CONFIG_TARGET_MX6CUBOXI=y |
| CONFIG_DM_GPIO=y |
| CONFIG_SPL_TEXT_BASE=0x00908000 |
| CONFIG_SPL_MMC_SUPPORT=y |
| CONFIG_SPL_SERIAL_SUPPORT=y |
| CONFIG_NR_DRAM_BANKS=1 |
| CONFIG_SPL=y |
| CONFIG_SPL_LIBDISK_SUPPORT=y |
| # CONFIG_CMD_BMODE is not set |
| CONFIG_CMD_HDMIDETECT=y |
| CONFIG_AHCI=y |
| CONFIG_DISTRO_DEFAULTS=y |
| CONFIG_FIT=y |
| CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" |
| CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" |
| CONFIG_USE_PREBOOT=y |
| CONFIG_PREBOOT="if hdmidet; then usb start; setenv stdin serial,usbkbd; setenv stdout serial,vga; setenv stderr serial,vga; else setenv stdin serial; setenv stdout serial; setenv stderr serial; fi;" |
| CONFIG_BOUNCE_BUFFER=y |
| CONFIG_BOARD_EARLY_INIT_F=y |
| CONFIG_SPL_SEPARATE_BSS=y |
| CONFIG_SPL_FS_EXT4=y |
| CONFIG_SPL_I2C_SUPPORT=y |
| CONFIG_SPL_WATCHDOG_SUPPORT=y |
| CONFIG_CMD_GPIO=y |
| CONFIG_CMD_MMC=y |
| # CONFIG_CMD_PINMUX is not set |
| CONFIG_CMD_SATA=y |
| CONFIG_CMD_USB=y |
| CONFIG_CMD_CACHE=y |
| CONFIG_CMD_EXT4_WRITE=y |
| # CONFIG_SPL_PARTITION_UUIDS is not set |
| CONFIG_OF_CONTROL=y |
| CONFIG_SPL_OF_CONTROL=y |
| CONFIG_DEFAULT_DEVICE_TREE="imx6dl-hummingboard2-emmc-som-v15" |
| CONFIG_OF_LIST="imx6dl-hummingboard2-emmc-som-v15 imx6q-hummingboard2-emmc-som-v15" |
| CONFIG_MULTI_DTB_FIT=y |
| CONFIG_ENV_IS_IN_MMC=y |
| CONFIG_SYS_RELOC_GD_ENV_ADDR=y |
| CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y |
| CONFIG_NET_RANDOM_ETHADDR=y |
| CONFIG_DM=y |
| CONFIG_SPL_DM=y |
| CONFIG_DWC_AHSATA=y |
| CONFIG_DM_MMC=y |
| CONFIG_FSL_USDHC=y |
| CONFIG_PHYLIB=y |
| CONFIG_PHY_ATHEROS=y |
| CONFIG_DM_ETH=y |
| CONFIG_FEC_MXC=y |
| CONFIG_RGMII=y |
| CONFIG_MII=y |
| CONFIG_PINCTRL=y |
| CONFIG_PINCTRL_IMX6=y |
| CONFIG_DM_REGULATOR=y |
| CONFIG_DM_REGULATOR_FIXED=y |
| CONFIG_DM_THERMAL=y |
| CONFIG_USB=y |
| CONFIG_DM_USB=y |
| CONFIG_USB_KEYBOARD=y |
| CONFIG_VIDEO_IPUV3=y |
| CONFIG_VIDEO=y |
| # CONFIG_VIDEO_SW_CURSOR is not set |