| /* |
| * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <dt-bindings/clock/bcm63268-clock.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/power-domain/bcm63268-power-domain.h> |
| #include <dt-bindings/reset/bcm63268-reset.h> |
| #include "skeleton.dtsi" |
| |
| / { |
| compatible = "brcm,bcm63268"; |
| |
| cpus { |
| reg = <0x10000000 0x4>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| u-boot,dm-pre-reloc; |
| |
| cpu@0 { |
| compatible = "brcm,bcm63268-cpu", "mips,mips4Kc"; |
| device_type = "cpu"; |
| reg = <0>; |
| u-boot,dm-pre-reloc; |
| }; |
| |
| cpu@1 { |
| compatible = "brcm,bcm63268-cpu", "mips,mips4Kc"; |
| device_type = "cpu"; |
| reg = <1>; |
| u-boot,dm-pre-reloc; |
| }; |
| }; |
| |
| clocks { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| u-boot,dm-pre-reloc; |
| |
| periph_osc: periph-osc { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <50000000>; |
| u-boot,dm-pre-reloc; |
| }; |
| |
| periph_clk: periph-clk { |
| compatible = "brcm,bcm6345-clk"; |
| reg = <0x10000004 0x4>; |
| #clock-cells = <1>; |
| }; |
| |
| timer_clk: timer-clk { |
| compatible = "brcm,bcm6345-clk"; |
| reg = <0x100000ac 0x4>; |
| #clock-cells = <1>; |
| }; |
| }; |
| |
| ubus { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| u-boot,dm-pre-reloc; |
| |
| pll_cntl: syscon@10000008 { |
| compatible = "syscon"; |
| reg = <0x10000008 0x4>; |
| }; |
| |
| syscon-reboot { |
| compatible = "syscon-reboot"; |
| regmap = <&pll_cntl>; |
| offset = <0x0>; |
| mask = <0x1>; |
| }; |
| |
| periph_rst: reset-controller@10000010 { |
| compatible = "brcm,bcm6345-reset"; |
| reg = <0x10000010 0x4>; |
| #reset-cells = <1>; |
| }; |
| |
| wdt: watchdog@1000009c { |
| compatible = "brcm,bcm6345-wdt"; |
| reg = <0x1000009c 0xc>; |
| clocks = <&periph_osc>; |
| }; |
| |
| wdt-reboot { |
| compatible = "wdt-reboot"; |
| wdt = <&wdt>; |
| }; |
| |
| gpio1: gpio-controller@100000c0 { |
| compatible = "brcm,bcm6345-gpio"; |
| reg = <0x100000c0 0x4>, <0x100000c8 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <20>; |
| |
| status = "disabled"; |
| }; |
| |
| gpio0: gpio-controller@100000c4 { |
| compatible = "brcm,bcm6345-gpio"; |
| reg = <0x100000c4 0x4>, <0x100000cc 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| |
| status = "disabled"; |
| }; |
| |
| uart0: serial@10000180 { |
| compatible = "brcm,bcm6345-uart"; |
| reg = <0x10000180 0x18>; |
| clocks = <&periph_osc>; |
| |
| status = "disabled"; |
| }; |
| |
| uart1: serial@100001a0 { |
| compatible = "brcm,bcm6345-uart"; |
| reg = <0x100001a0 0x18>; |
| clocks = <&periph_osc>; |
| |
| status = "disabled"; |
| }; |
| |
| periph_pwr: power-controller@1000184c { |
| compatible = "brcm,bcm6328-power-domain"; |
| reg = <0x1000184c 0x4>; |
| #power-domain-cells = <1>; |
| }; |
| |
| leds: led-controller@10001900 { |
| compatible = "brcm,bcm6328-leds"; |
| reg = <0x10001900 0x24>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| status = "disabled"; |
| }; |
| |
| memory-controller@10003000 { |
| compatible = "brcm,bcm6328-mc"; |
| reg = <0x10003000 0x894>; |
| u-boot,dm-pre-reloc; |
| }; |
| }; |
| }; |