| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2016 Compulab, Ltd. |
| */ |
| |
| #include <common.h> |
| #include <hang.h> |
| #include <init.h> |
| #include <spl.h> |
| #include <i2c.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/ddr_defs.h> |
| #include <asm/gpio.h> |
| #include <power/pmic.h> |
| #include <power/tps65218.h> |
| #include "board.h" |
| |
| const struct dpll_params dpll_mpu = { 800, 24, 1, -1, -1, -1, -1 }; |
| const struct dpll_params dpll_core = { 1000, 24, -1, -1, 10, 8, 4 }; |
| const struct dpll_params dpll_per = { 960, 24, 5, -1, -1, -1, -1 }; |
| const struct dpll_params dpll_ddr = { 400, 23, 1, -1, 1, -1, -1 }; |
| |
| const struct ctrl_ioregs ioregs_ddr3 = { |
| .cm0ioctl = DDR3_ADDRCTRL_IOCTRL_VALUE, |
| .cm1ioctl = DDR3_ADDRCTRL_WD0_IOCTRL_VALUE, |
| .cm2ioctl = DDR3_ADDRCTRL_WD1_IOCTRL_VALUE, |
| .dt0ioctl = DDR3_DATA0_IOCTRL_VALUE, |
| .dt1ioctl = DDR3_DATA0_IOCTRL_VALUE, |
| .dt2ioctrl = DDR3_DATA0_IOCTRL_VALUE, |
| .dt3ioctrl = DDR3_DATA0_IOCTRL_VALUE, |
| .emif_sdram_config_ext = 0x0143, |
| }; |
| |
| /* EMIF DDR3 Configurations are different for production AM43X GP EVMs */ |
| struct emif_regs ddr3_emif_regs = { |
| .sdram_config = 0x638413B2, |
| .ref_ctrl = 0x00000C30, |
| .sdram_tim1 = 0xEAAAD4DB, |
| .sdram_tim2 = 0x266B7FDA, |
| .sdram_tim3 = 0x107F8678, |
| .read_idle_ctrl = 0x00050000, |
| .zq_config = 0x50074BE4, |
| .temp_alert_config = 0x0, |
| .emif_ddr_phy_ctlr_1 = 0x0E004008, |
| .emif_ddr_ext_phy_ctrl_1 = 0x08020080, |
| .emif_ddr_ext_phy_ctrl_2 = 0x00000066, |
| .emif_ddr_ext_phy_ctrl_3 = 0x00000091, |
| .emif_ddr_ext_phy_ctrl_4 = 0x000000B9, |
| .emif_ddr_ext_phy_ctrl_5 = 0x000000E6, |
| .emif_rd_wr_exec_thresh = 0x80000405, |
| .emif_prio_class_serv_map = 0x80000001, |
| .emif_connect_id_serv_1_map = 0x80000094, |
| .emif_connect_id_serv_2_map = 0x00000000, |
| .emif_cos_config = 0x000FFFFF |
| }; |
| |
| const u32 ext_phy_ctrl_const_base_ddr3[] = { |
| 0x00000000, |
| 0x00000044, |
| 0x00000044, |
| 0x00000046, |
| 0x00000046, |
| 0x00000000, |
| 0x00000059, |
| 0x00000077, |
| 0x00000093, |
| 0x000000A8, |
| 0x00000000, |
| 0x00000019, |
| 0x00000037, |
| 0x00000053, |
| 0x00000068, |
| 0x00000000, |
| 0x0, |
| 0x0, |
| 0x40000000, |
| 0x08102040 |
| }; |
| |
| void emif_get_ext_phy_ctrl_const_regs(const u32 **regs, u32 *size) |
| { |
| *regs = ext_phy_ctrl_const_base_ddr3; |
| *size = ARRAY_SIZE(ext_phy_ctrl_const_base_ddr3); |
| } |
| |
| const struct dpll_params *get_dpll_ddr_params(void) |
| { |
| return &dpll_ddr; |
| } |
| |
| const struct dpll_params *get_dpll_mpu_params(void) |
| { |
| return &dpll_mpu; |
| } |
| |
| const struct dpll_params *get_dpll_core_params(void) |
| { |
| return &dpll_core; |
| } |
| |
| const struct dpll_params *get_dpll_per_params(void) |
| { |
| return &dpll_per; |
| } |
| |
| void scale_vcores(void) |
| { |
| set_i2c_pin_mux(); |
| i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); |
| if (i2c_probe(TPS65218_CHIP_PM)) |
| return; |
| |
| tps65218_voltage_update(TPS65218_DCDC1, TPS65218_DCDC_VOLT_SEL_1100MV); |
| tps65218_voltage_update(TPS65218_DCDC2, TPS65218_DCDC_VOLT_SEL_1100MV); |
| } |
| |
| void sdram_init(void) |
| { |
| unsigned long ram_size; |
| |
| config_ddr(0, &ioregs_ddr3, NULL, NULL, &ddr3_emif_regs, 0); |
| ram_size = get_ram_size((long int *)CONFIG_SYS_SDRAM_BASE, 0x80000000); |
| if (ram_size == 0x80000000 || |
| ram_size == 0x40000000 || |
| ram_size == 0x20000000) |
| return; |
| |
| ddr3_emif_regs.sdram_config = 0x638453B2; |
| config_ddr(0, &ioregs_ddr3, NULL, NULL, &ddr3_emif_regs, 0); |
| ram_size = get_ram_size((long int *)CONFIG_SYS_SDRAM_BASE, 0x80000000); |
| if (ram_size == 0x08000000) |
| return; |
| |
| hang(); |
| } |