board/ge/bx50v3/bx50v3.c - platform/external/u-boot - Gitiles

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2015 Timesys Corporation
  * Copyright 2015 General Electric Company
  * Copyright 2012 Freescale Semiconductor, Inc.
  */

 #include <init.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/iomux.h>
 #include <asm/arch/mx6-pins.h>
 #include <env.h>
 #include <linux/errno.h>
 #include <linux/libfdt.h>
 #include <asm/gpio.h>
 #include <asm/mach-imx/iomux-v3.h>
 #include <asm/mach-imx/boot_mode.h>
 #include <asm/mach-imx/video.h>
 #include <mmc.h>
 #include <fsl_esdhc_imx.h>
 #include <miiphy.h>
 #include <net.h>
 #include <netdev.h>
 #include <asm/arch/mxc_hdmi.h>
 #include <asm/arch/crm_regs.h>
 #include <asm/io.h>
 #include <asm/arch/sys_proto.h>
 #include <power/regulator.h>
 #include <power/da9063_pmic.h>
 #include <input.h>
 #include <pwm.h>
 #include <version.h>
 #include <stdlib.h>
 #include <dm/root.h>
 #include "../common/ge_common.h"
 #include "../common/vpd_reader.h"
 #include "../../../drivers/net/e1000.h"
 #include <pci.h>
 #include <panel.h>

 DECLARE_GLOBAL_DATA_PTR;

 static int confidx;  /* Default to generic. */
 static struct vpd_cache vpd;

 #define NC_PAD_CTRL (PAD_CTL_PUS_100K_UP |	\
 	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm |	\
 	PAD_CTL_HYS)

 #define ENET_PAD_CTRL  (PAD_CTL_PUS_100K_UP | PAD_CTL_PUE |	\
 	PAD_CTL_SPEED_HIGH | PAD_CTL_DSE_48ohm | PAD_CTL_SRE_FAST)

 #define ENET_CLK_PAD_CTRL (PAD_CTL_SPEED_MED | \
 	PAD_CTL_DSE_120ohm | PAD_CTL_SRE_FAST)

 #define ENET_RX_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
 	PAD_CTL_SPEED_HIGH   | PAD_CTL_SRE_FAST)

 #define I2C_PAD_CTRL  (PAD_CTL_PUS_100K_UP |			\
 	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS |	\
 	PAD_CTL_ODE | PAD_CTL_SRE_FAST)

 #define I2C_PAD MUX_PAD_CTRL(I2C_PAD_CTRL)

 int dram_init(void)
 {
 	gd->ram_size = imx_ddr_size();

 	return 0;
 }

 static int mx6_rgmii_rework(struct phy_device *phydev)
 {
 	/* Configure AR8033 to ouput a 125MHz clk from CLK_25M */
 	/* set device address 0x7 */
 	phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7);
 	/* offset 0x8016: CLK_25M Clock Select */
 	phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016);
 	/* enable register write, no post increment, address 0x7 */
 	phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007);
 	/* set to 125 MHz from local PLL source */
 	phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x18);

 	/* rgmii tx clock delay enable */
 	/* set debug port address: SerDes Test and System Mode Control */
 	phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05);
 	/* enable rgmii tx clock delay */
 	/* set the reserved bits to avoid board specific voltage peak issue*/
 	phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x3D47);

 	return 0;
 }

 int board_phy_config(struct phy_device *phydev)
 {
 	mx6_rgmii_rework(phydev);

 	if (phydev->drv->config)
 		phydev->drv->config(phydev);

 	return 0;
 }

 #if defined(CONFIG_VIDEO_IPUV3)
 static void do_enable_backlight(struct display_info_t const *dev)
 {
 	struct udevice *panel;
 	int ret;

 	ret = uclass_get_device(UCLASS_PANEL, 0, &panel);
 	if (ret) {
 		printf("Could not find panel: %d\n", ret);
 		return;
 	}

 	panel_set_backlight(panel, 100);
 	panel_enable_backlight(panel);
 }

 static void do_enable_hdmi(struct display_info_t const *dev)
 {
 	imx_enable_hdmi_phy();
 }

 static int is_b850v3(void)
 {
 	return confidx == 3;
 }

 static int detect_lcd(struct display_info_t const *dev)
 {
 	return !is_b850v3();
 }

 struct display_info_t const displays[] = {{
 	.bus	= -1,
 	.addr	= -1,
 	.pixfmt	= IPU_PIX_FMT_RGB24,
 	.detect	= detect_lcd,
 	.enable	= do_enable_backlight,
 	.mode	= {
 		.name           = "G121X1-L03",
 		.refresh        = 60,
 		.xres           = 1024,
 		.yres           = 768,
 		.pixclock       = 15385,
 		.left_margin    = 20,
 		.right_margin   = 300,
 		.upper_margin   = 30,
 		.lower_margin   = 8,
 		.hsync_len      = 1,
 		.vsync_len      = 1,
 		.sync           = FB_SYNC_EXT,
 		.vmode          = FB_VMODE_NONINTERLACED
 } }, {
 	.bus	= -1,
 	.addr	= 3,
 	.pixfmt	= IPU_PIX_FMT_RGB24,
 	.detect	= detect_hdmi,
 	.enable	= do_enable_hdmi,
 	.mode	= {
 		.name           = "HDMI",
 		.refresh        = 60,
 		.xres           = 1024,
 		.yres           = 768,
 		.pixclock       = 15385,
 		.left_margin    = 220,
 		.right_margin   = 40,
 		.upper_margin   = 21,
 		.lower_margin   = 7,
 		.hsync_len      = 60,
 		.vsync_len      = 10,
 		.sync           = FB_SYNC_EXT,
 		.vmode          = FB_VMODE_NONINTERLACED
 } } };
 size_t display_count = ARRAY_SIZE(displays);

 static void enable_videopll(void)
 {
 	struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
 	s32 timeout = 100000;

 	setbits_le32(&ccm->analog_pll_video, BM_ANADIG_PLL_VIDEO_POWERDOWN);

 	/* PLL_VIDEO  455MHz (24MHz * (37+11/12) / 2)
 	 *   |
 	 * PLL5
 	 *   |
 	 * CS2CDR[LDB_DI0_CLK_SEL]
 	 *   |
 	 *   +----> LDB_DI0_SERIAL_CLK_ROOT
 	 *   |
 	 *   +--> CSCMR2[LDB_DI0_IPU_DIV] --> LDB_DI0_IPU  455 / 7 = 65 MHz
 	 */

 	clrsetbits_le32(&ccm->analog_pll_video,
 			BM_ANADIG_PLL_VIDEO_DIV_SELECT |
 			BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT,
 			BF_ANADIG_PLL_VIDEO_DIV_SELECT(37) |
 			BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(1));

 	writel(BF_ANADIG_PLL_VIDEO_NUM_A(11), &ccm->analog_pll_video_num);
 	writel(BF_ANADIG_PLL_VIDEO_DENOM_B(12), &ccm->analog_pll_video_denom);

 	clrbits_le32(&ccm->analog_pll_video, BM_ANADIG_PLL_VIDEO_POWERDOWN);

 	while (timeout--)
 		if (readl(&ccm->analog_pll_video) & BM_ANADIG_PLL_VIDEO_LOCK)
 			break;

 	if (timeout < 0)
 		printf("Warning: video pll lock timeout!\n");

 	clrsetbits_le32(&ccm->analog_pll_video,
 			BM_ANADIG_PLL_VIDEO_BYPASS,
 			BM_ANADIG_PLL_VIDEO_ENABLE);
 }

 static void setup_display_b850v3(void)
 {
 	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
 	struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;

 	enable_videopll();

 	/* IPU1 DI0 clock is 455MHz / 7 = 65MHz */
 	setbits_le32(&mxc_ccm->cscmr2, MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV);

 	imx_setup_hdmi();

 	/* Set LDB_DI0 as clock source for IPU_DI0 */
 	clrsetbits_le32(&mxc_ccm->chsccdr,
 			MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK,
 			(CHSCCDR_CLK_SEL_LDB_DI0 <<
 			 MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET));

 	/* Turn on IPU LDB DI0 clocks */
 	setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_LDB_DI0_MASK);

 	enable_ipu_clock();

 	writel(IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES |
 	       IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_LOW |
 	       IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW |
 	       IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG |
 	       IOMUXC_GPR2_DATA_WIDTH_CH1_24BIT |
 	       IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG |
 	       IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT |
 	       IOMUXC_GPR2_SPLIT_MODE_EN_MASK |
 	       IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0 |
 	       IOMUXC_GPR2_LVDS_CH1_MODE_ENABLED_DI0,
 	       &iomux->gpr[2]);

 	clrbits_le32(&iomux->gpr[3],
 		     IOMUXC_GPR3_LVDS0_MUX_CTL_MASK |
 		     IOMUXC_GPR3_LVDS1_MUX_CTL_MASK |
 		     IOMUXC_GPR3_HDMI_MUX_CTL_MASK);
 }

 static void setup_display_bx50v3(void)
 {
 	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
 	struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;

 	enable_videopll();

 	/* When a reset/reboot is performed the display power needs to be turned
 	 * off for atleast 500ms. The boot time is ~300ms, we need to wait for
 	 * an additional 200ms here. Unfortunately we use external PMIC for
 	 * doing the reset, so can not differentiate between POR vs soft reset
 	 */
 	mdelay(200);

 	/* IPU1 DI0 clock is 455MHz / 7 = 65MHz */
 	setbits_le32(&mxc_ccm->cscmr2, MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV);

 	/* Set LDB_DI0 as clock source for IPU_DI0 */
 	clrsetbits_le32(&mxc_ccm->chsccdr,
 			MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK,
 			(CHSCCDR_CLK_SEL_LDB_DI0 <<
 			MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET));

 	/* Turn on IPU LDB DI0 clocks */
 	setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_LDB_DI0_MASK);

 	enable_ipu_clock();

 	writel(IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES |
 	       IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW |
 	       IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG |
 	       IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT |
 	       IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0,
 	       &iomux->gpr[2]);

 	clrsetbits_le32(&iomux->gpr[3],
 			IOMUXC_GPR3_LVDS0_MUX_CTL_MASK,
 		       (IOMUXC_GPR3_MUX_SRC_IPU1_DI0 <<
 			IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET));
 }
 #endif /* CONFIG_VIDEO_IPUV3 */

 /*
  * Do not overwrite the console
  * Use always serial for U-Boot console
  */
 int overwrite_console(void)
 {
 	return 1;
 }

 #define VPD_TYPE_INVALID 0x00
 #define VPD_BLOCK_NETWORK 0x20
 #define VPD_BLOCK_HWID 0x44
 #define VPD_PRODUCT_B850 1
 #define VPD_PRODUCT_B650 2
 #define VPD_PRODUCT_B450 3
 #define VPD_HAS_MAC1 0x1
 #define VPD_HAS_MAC2 0x2
 #define VPD_MAC_ADDRESS_LENGTH 6

 struct vpd_cache {
 	bool is_read;
 	u8 product_id;
 	u8 has;
 	unsigned char mac1[VPD_MAC_ADDRESS_LENGTH];
 	unsigned char mac2[VPD_MAC_ADDRESS_LENGTH];
 };

 /*
  * Extracts MAC and product information from the VPD.
  */
 static int vpd_callback(struct vpd_cache *vpd, u8 id, u8 version, u8 type,
 			size_t size, u8 const *data)
 {
 	if (id == VPD_BLOCK_HWID && version == 1 && type != VPD_TYPE_INVALID &&
 	    size >= 1) {
 		vpd->product_id = data[0];
 	} else if (id == VPD_BLOCK_NETWORK && version == 1 &&
 		   type != VPD_TYPE_INVALID) {
 		if (size >= 6) {
 			vpd->has |= VPD_HAS_MAC1;
 			memcpy(vpd->mac1, data, VPD_MAC_ADDRESS_LENGTH);
 		}
 		if (size >= 12) {
 			vpd->has |= VPD_HAS_MAC2;
 			memcpy(vpd->mac2, data + 6, VPD_MAC_ADDRESS_LENGTH);
 		}
 	}

 	return 0;
 }

 static void process_vpd(struct vpd_cache *vpd)
 {
 	int fec_index = 0;
 	int i210_index = -1;

 	if (!vpd->is_read) {
 		printf("VPD wasn't read");
 		return;
 	}

 	if (vpd->has & VPD_HAS_MAC1)
 		eth_env_set_enetaddr_by_index("eth", fec_index, vpd->mac1);

 	env_set("ethact", "eth0");

 	switch (vpd->product_id) {
 	case VPD_PRODUCT_B450:
 		env_set("confidx", "1");
 		i210_index = 1;
 		break;
 	case VPD_PRODUCT_B650:
 		env_set("confidx", "2");
 		i210_index = 1;
 		break;
 	case VPD_PRODUCT_B850:
 		env_set("confidx", "3");
 		i210_index = 2;
 		break;
 	}

 	if (i210_index >= 0 && (vpd->has & VPD_HAS_MAC2))
 		eth_env_set_enetaddr_by_index("eth", i210_index, vpd->mac2);
 }

 static iomux_v3_cfg_t const misc_pads[] = {
 	MX6_PAD_KEY_ROW2__GPIO4_IO11	| MUX_PAD_CTRL(NO_PAD_CTRL),
 	MX6_PAD_EIM_A25__GPIO5_IO02	| MUX_PAD_CTRL(NC_PAD_CTRL),
 	MX6_PAD_EIM_CS0__GPIO2_IO23	| MUX_PAD_CTRL(NC_PAD_CTRL),
 	MX6_PAD_EIM_CS1__GPIO2_IO24	| MUX_PAD_CTRL(NC_PAD_CTRL),
 	MX6_PAD_EIM_OE__GPIO2_IO25	| MUX_PAD_CTRL(NC_PAD_CTRL),
 	MX6_PAD_EIM_BCLK__GPIO6_IO31	| MUX_PAD_CTRL(NC_PAD_CTRL),
 	MX6_PAD_GPIO_1__GPIO1_IO01	| MUX_PAD_CTRL(NC_PAD_CTRL),
 	MX6_PAD_GPIO_9__WDOG1_B         | MUX_PAD_CTRL(NC_PAD_CTRL),
 };
 #define SUS_S3_OUT	IMX_GPIO_NR(4, 11)
 #define WIFI_EN	IMX_GPIO_NR(6, 14)

 int board_early_init_f(void)
 {
 	imx_iomux_v3_setup_multiple_pads(misc_pads,
 					 ARRAY_SIZE(misc_pads));

 #if defined(CONFIG_VIDEO_IPUV3)
 	/* Set LDB clock to Video PLL */
 	select_ldb_di_clock_source(MXC_PLL5_CLK);
 #endif
 	return 0;
 }

 static void set_confidx(const struct vpd_cache* vpd)
 {
 	switch (vpd->product_id) {
 	case VPD_PRODUCT_B450:
 		confidx = 1;
 		break;
 	case VPD_PRODUCT_B650:
 		confidx = 2;
 		break;
 	case VPD_PRODUCT_B850:
 		confidx = 3;
 		break;
 	}
 }

 int board_init(void)
 {
 	if (!read_vpd(&vpd, vpd_callback)) {
 		int ret, rescan;

 		vpd.is_read = true;
 		set_confidx(&vpd);

 		ret = fdtdec_resetup(&rescan);
 		if (!ret && rescan) {
 			dm_uninit();
 			dm_init_and_scan(false);
 		}
 	}

 	gpio_request(SUS_S3_OUT, "sus_s3_out");
 	gpio_direction_output(SUS_S3_OUT, 1);

 	gpio_request(WIFI_EN, "wifi_en");
 	gpio_direction_output(WIFI_EN, 1);

 #if defined(CONFIG_VIDEO_IPUV3)
 	if (is_b850v3())
 		setup_display_b850v3();
 	else
 		setup_display_bx50v3();
 #endif

 	/* address of boot parameters */
 	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;

 	return 0;
 }

 #ifdef CONFIG_CMD_BMODE
 static const struct boot_mode board_boot_modes[] = {
 	/* 4 bit bus width */
 	{"sd2",	 MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
 	{"sd3",	 MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
 	{NULL,	 0},
 };
 #endif

 void pmic_init(void)
 {
 	struct udevice *reg;
 	int ret, i;
 	static const char * const bucks[] = {
 		"bcore1",
 		"bcore2",
 		"bpro",
 		"bmem",
 		"bio",
 		"bperi",
 	};

 	for (i = 0; i < ARRAY_SIZE(bucks); i++) {
 		ret = regulator_get_by_devname(bucks[i], &reg);
 		if (reg < 0) {
 			printf("%s(): Unable to get regulator %s: %d\n",
 			       __func__, bucks[i], ret);
 			continue;
 		}
 		regulator_set_mode(reg, DA9063_BUCKMODE_SYNC);
 	}
 }

 int board_late_init(void)
 {
 	process_vpd(&vpd);

 #ifdef CONFIG_CMD_BMODE
 	add_board_boot_modes(board_boot_modes);
 #endif

 	if (is_b850v3())
 		env_set("videoargs", "video=DP-1:1024x768@60 video=HDMI-A-1:1024x768@60");
 	else
 		env_set("videoargs", "video=LVDS-1:1024x768@65");

 	/* board specific pmic init */
 	pmic_init();

 	check_time();

 	pci_init();

 	return 0;
 }

 /*
  * Removes the 'eth[0-9]*addr' environment variable with the given index
  *
  * @param index [in] the index of the eth_device whose variable is to be removed
  */
 static void remove_ethaddr_env_var(int index)
 {
 	char env_var_name[9];

 	sprintf(env_var_name, index == 0 ? "ethaddr" : "eth%daddr", index);
 	env_set(env_var_name, NULL);
 }

 int last_stage_init(void)
 {
 	int i;

 	/*
 	 * Remove first three ethaddr which may have been created by
 	 * function process_vpd().
 	 */
 	for (i = 0; i < 3; ++i)
 		remove_ethaddr_env_var(i);

 	return 0;
 }

 int checkboard(void)
 {
 	printf("BOARD: %s\n", CONFIG_BOARD_NAME);
 	return 0;
 }

 #ifdef CONFIG_OF_BOARD_SETUP
 int ft_board_setup(void *blob, bd_t *bd)
 {
 	char *rtc_status = env_get("rtc_status");

 	fdt_setprop(blob, 0, "ge,boot-ver", version_string,
 		    strlen(version_string) + 1);

 	fdt_setprop(blob, 0, "ge,rtc-status", rtc_status,
 		    strlen(rtc_status) + 1);
 	return 0;
 }
 #endif

 int board_fit_config_name_match(const char *name)
 {
 	if (!vpd.is_read)
 		return strcmp(name, "imx6q-bx50v3");

 	switch (vpd.product_id) {
 	case VPD_PRODUCT_B450:
 		return strcmp(name, "imx6q-b450v3");
 	case VPD_PRODUCT_B650:
 		return strcmp(name, "imx6q-b650v3");
 	case VPD_PRODUCT_B850:
 		return strcmp(name, "imx6q-b850v3");
 	default:
 		return -1;
 	}
 }

 int embedded_dtb_select(void)
 {
 	vpd.is_read = false;
 	return fdtdec_setup();
 }
	// SPDX-License-Identifier: GPL-2.0+
	/*
	* Copyright 2015 Timesys Corporation
	* Copyright 2015 General Electric Company
	* Copyright 2012 Freescale Semiconductor, Inc.
	*/

	#include <init.h>
	#include <asm/arch/clock.h>
	#include <asm/arch/imx-regs.h>
	#include <asm/arch/iomux.h>
	#include <asm/arch/mx6-pins.h>
	#include <env.h>
	#include <linux/errno.h>
	#include <linux/libfdt.h>
	#include <asm/gpio.h>
	#include <asm/mach-imx/iomux-v3.h>
	#include <asm/mach-imx/boot_mode.h>
	#include <asm/mach-imx/video.h>
	#include <mmc.h>
	#include <fsl_esdhc_imx.h>
	#include <miiphy.h>
	#include <net.h>
	#include <netdev.h>
	#include <asm/arch/mxc_hdmi.h>
	#include <asm/arch/crm_regs.h>
	#include <asm/io.h>
	#include <asm/arch/sys_proto.h>
	#include <power/regulator.h>
	#include <power/da9063_pmic.h>
	#include <input.h>
	#include <pwm.h>
	#include <version.h>
	#include <stdlib.h>
	#include <dm/root.h>
	#include "../common/ge_common.h"
	#include "../common/vpd_reader.h"
	#include "../../../drivers/net/e1000.h"
	#include <pci.h>
	#include <panel.h>

	DECLARE_GLOBAL_DATA_PTR;

	static int confidx; /* Default to generic. */
	static struct vpd_cache vpd;

	#define NC_PAD_CTRL (PAD_CTL_PUS_100K_UP \| \
	PAD_CTL_SPEED_MED \| PAD_CTL_DSE_40ohm \| \
	PAD_CTL_HYS)

	#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP \| PAD_CTL_PUE \| \
	PAD_CTL_SPEED_HIGH \| PAD_CTL_DSE_48ohm \| PAD_CTL_SRE_FAST)

	#define ENET_CLK_PAD_CTRL (PAD_CTL_SPEED_MED \| \
	PAD_CTL_DSE_120ohm \| PAD_CTL_SRE_FAST)

	#define ENET_RX_PAD_CTRL (PAD_CTL_PKE \| PAD_CTL_PUE \| \
	PAD_CTL_SPEED_HIGH \| PAD_CTL_SRE_FAST)

	#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP \| \
	PAD_CTL_SPEED_MED \| PAD_CTL_DSE_40ohm \| PAD_CTL_HYS \| \
	PAD_CTL_ODE \| PAD_CTL_SRE_FAST)

	#define I2C_PAD MUX_PAD_CTRL(I2C_PAD_CTRL)

	int dram_init(void)
	{
	gd->ram_size = imx_ddr_size();

	return 0;
	}

	static int mx6_rgmii_rework(struct phy_device *phydev)
	{
	/* Configure AR8033 to ouput a 125MHz clk from CLK_25M */
	/* set device address 0x7 */
	phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7);
	/* offset 0x8016: CLK_25M Clock Select */
	phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016);
	/* enable register write, no post increment, address 0x7 */
	phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007);
	/* set to 125 MHz from local PLL source */
	phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x18);

	/* rgmii tx clock delay enable */
	/* set debug port address: SerDes Test and System Mode Control */
	phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05);
	/* enable rgmii tx clock delay */
	/* set the reserved bits to avoid board specific voltage peak issue*/
	phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x3D47);

	return 0;
	}

	int board_phy_config(struct phy_device *phydev)
	{
	mx6_rgmii_rework(phydev);

	if (phydev->drv->config)
	phydev->drv->config(phydev);

	return 0;
	}

	#if defined(CONFIG_VIDEO_IPUV3)
	static void do_enable_backlight(struct display_info_t const *dev)
	{
	struct udevice *panel;
	int ret;

	ret = uclass_get_device(UCLASS_PANEL, 0, &panel);
	if (ret) {
	printf("Could not find panel: %d\n", ret);
	return;
	}

	panel_set_backlight(panel, 100);
	panel_enable_backlight(panel);
	}

	static void do_enable_hdmi(struct display_info_t const *dev)
	{
	imx_enable_hdmi_phy();
	}

	static int is_b850v3(void)
	{
	return confidx == 3;
	}

	static int detect_lcd(struct display_info_t const *dev)
	{
	return !is_b850v3();
	}

	struct display_info_t const displays[] = {{
	.bus = -1,
	.addr = -1,
	.pixfmt = IPU_PIX_FMT_RGB24,
	.detect = detect_lcd,
	.enable = do_enable_backlight,
	.mode = {
	.name = "G121X1-L03",
	.refresh = 60,
	.xres = 1024,
	.yres = 768,
	.pixclock = 15385,
	.left_margin = 20,
	.right_margin = 300,
	.upper_margin = 30,
	.lower_margin = 8,
	.hsync_len = 1,
	.vsync_len = 1,
	.sync = FB_SYNC_EXT,
	.vmode = FB_VMODE_NONINTERLACED
	} }, {
	.bus = -1,
	.addr = 3,
	.pixfmt = IPU_PIX_FMT_RGB24,
	.detect = detect_hdmi,
	.enable = do_enable_hdmi,
	.mode = {
	.name = "HDMI",
	.refresh = 60,
	.xres = 1024,
	.yres = 768,
	.pixclock = 15385,
	.left_margin = 220,
	.right_margin = 40,
	.upper_margin = 21,
	.lower_margin = 7,
	.hsync_len = 60,
	.vsync_len = 10,
	.sync = FB_SYNC_EXT,
	.vmode = FB_VMODE_NONINTERLACED
	} } };
	size_t display_count = ARRAY_SIZE(displays);

	static void enable_videopll(void)
	{
	struct mxc_ccm_reg ccm = (struct mxc_ccm_reg )CCM_BASE_ADDR;
	s32 timeout = 100000;

	setbits_le32(&ccm->analog_pll_video, BM_ANADIG_PLL_VIDEO_POWERDOWN);

	/* PLL_VIDEO 455MHz (24MHz * (37+11/12) / 2)
	* \|
	* PLL5
	* \|
	* CS2CDR[LDB_DI0_CLK_SEL]
	* \|
	* +----> LDB_DI0_SERIAL_CLK_ROOT
	* \|
	* +--> CSCMR2[LDB_DI0_IPU_DIV] --> LDB_DI0_IPU 455 / 7 = 65 MHz
	*/

	clrsetbits_le32(&ccm->analog_pll_video,
	BM_ANADIG_PLL_VIDEO_DIV_SELECT \|
	BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT,
	BF_ANADIG_PLL_VIDEO_DIV_SELECT(37) \|
	BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(1));

	writel(BF_ANADIG_PLL_VIDEO_NUM_A(11), &ccm->analog_pll_video_num);
	writel(BF_ANADIG_PLL_VIDEO_DENOM_B(12), &ccm->analog_pll_video_denom);

	clrbits_le32(&ccm->analog_pll_video, BM_ANADIG_PLL_VIDEO_POWERDOWN);

	while (timeout--)
	if (readl(&ccm->analog_pll_video) & BM_ANADIG_PLL_VIDEO_LOCK)
	break;

	if (timeout < 0)
	printf("Warning: video pll lock timeout!\n");

	clrsetbits_le32(&ccm->analog_pll_video,
	BM_ANADIG_PLL_VIDEO_BYPASS,
	BM_ANADIG_PLL_VIDEO_ENABLE);
	}

	static void setup_display_b850v3(void)
	{
	struct mxc_ccm_reg mxc_ccm = (struct mxc_ccm_reg )CCM_BASE_ADDR;
	struct iomuxc iomux = (struct iomuxc )IOMUXC_BASE_ADDR;

	enable_videopll();

	/* IPU1 DI0 clock is 455MHz / 7 = 65MHz */
	setbits_le32(&mxc_ccm->cscmr2, MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV);

	imx_setup_hdmi();

	/* Set LDB_DI0 as clock source for IPU_DI0 */
	clrsetbits_le32(&mxc_ccm->chsccdr,
	MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK,
	(CHSCCDR_CLK_SEL_LDB_DI0 <<
	MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET));

	/* Turn on IPU LDB DI0 clocks */
	setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_LDB_DI0_MASK);

	enable_ipu_clock();

	writel(IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES \|
	IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_LOW \|
	IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW \|
	IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG \|
	IOMUXC_GPR2_DATA_WIDTH_CH1_24BIT \|
	IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG \|
	IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT \|
	IOMUXC_GPR2_SPLIT_MODE_EN_MASK \|
	IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0 \|
	IOMUXC_GPR2_LVDS_CH1_MODE_ENABLED_DI0,
	&iomux->gpr[2]);

	clrbits_le32(&iomux->gpr[3],
	IOMUXC_GPR3_LVDS0_MUX_CTL_MASK \|
	IOMUXC_GPR3_LVDS1_MUX_CTL_MASK \|
	IOMUXC_GPR3_HDMI_MUX_CTL_MASK);
	}

	static void setup_display_bx50v3(void)
	{
	struct mxc_ccm_reg mxc_ccm = (struct mxc_ccm_reg )CCM_BASE_ADDR;
	struct iomuxc iomux = (struct iomuxc )IOMUXC_BASE_ADDR;

	enable_videopll();

	/* When a reset/reboot is performed the display power needs to be turned
	* off for atleast 500ms. The boot time is ~300ms, we need to wait for
	* an additional 200ms here. Unfortunately we use external PMIC for
	* doing the reset, so can not differentiate between POR vs soft reset
	*/
	mdelay(200);

	/* IPU1 DI0 clock is 455MHz / 7 = 65MHz */
	setbits_le32(&mxc_ccm->cscmr2, MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV);

	/* Set LDB_DI0 as clock source for IPU_DI0 */
	clrsetbits_le32(&mxc_ccm->chsccdr,
	MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK,
	(CHSCCDR_CLK_SEL_LDB_DI0 <<
	MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET));

	/* Turn on IPU LDB DI0 clocks */
	setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_LDB_DI0_MASK);

	enable_ipu_clock();

	writel(IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES \|
	IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW \|
	IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG \|
	IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT \|
	IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0,
	&iomux->gpr[2]);

	clrsetbits_le32(&iomux->gpr[3],
	IOMUXC_GPR3_LVDS0_MUX_CTL_MASK,
	(IOMUXC_GPR3_MUX_SRC_IPU1_DI0 <<
	IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET));
	}
	#endif /* CONFIG_VIDEO_IPUV3 */

	/*
	* Do not overwrite the console
	* Use always serial for U-Boot console
	*/
	int overwrite_console(void)
	{
	return 1;
	}

	#define VPD_TYPE_INVALID 0x00
	#define VPD_BLOCK_NETWORK 0x20
	#define VPD_BLOCK_HWID 0x44
	#define VPD_PRODUCT_B850 1
	#define VPD_PRODUCT_B650 2
	#define VPD_PRODUCT_B450 3
	#define VPD_HAS_MAC1 0x1
	#define VPD_HAS_MAC2 0x2
	#define VPD_MAC_ADDRESS_LENGTH 6

	struct vpd_cache {
	bool is_read;
	u8 product_id;
	u8 has;
	unsigned char mac1[VPD_MAC_ADDRESS_LENGTH];
	unsigned char mac2[VPD_MAC_ADDRESS_LENGTH];
	};

	/*
	* Extracts MAC and product information from the VPD.
	*/
	static int vpd_callback(struct vpd_cache *vpd, u8 id, u8 version, u8 type,
	size_t size, u8 const *data)
	{
	if (id == VPD_BLOCK_HWID && version == 1 && type != VPD_TYPE_INVALID &&
	size >= 1) {
	vpd->product_id = data[0];
	} else if (id == VPD_BLOCK_NETWORK && version == 1 &&
	type != VPD_TYPE_INVALID) {
	if (size >= 6) {
	vpd->has \|= VPD_HAS_MAC1;
	memcpy(vpd->mac1, data, VPD_MAC_ADDRESS_LENGTH);
	}
	if (size >= 12) {
	vpd->has \|= VPD_HAS_MAC2;
	memcpy(vpd->mac2, data + 6, VPD_MAC_ADDRESS_LENGTH);
	}
	}

	return 0;
	}

	static void process_vpd(struct vpd_cache *vpd)
	{
	int fec_index = 0;
	int i210_index = -1;

	if (!vpd->is_read) {
	printf("VPD wasn't read");
	return;
	}

	if (vpd->has & VPD_HAS_MAC1)
	eth_env_set_enetaddr_by_index("eth", fec_index, vpd->mac1);

	env_set("ethact", "eth0");

	switch (vpd->product_id) {
	case VPD_PRODUCT_B450:
	env_set("confidx", "1");
	i210_index = 1;
	break;
	case VPD_PRODUCT_B650:
	env_set("confidx", "2");
	i210_index = 1;
	break;
	case VPD_PRODUCT_B850:
	env_set("confidx", "3");
	i210_index = 2;
	break;
	}

	if (i210_index >= 0 && (vpd->has & VPD_HAS_MAC2))
	eth_env_set_enetaddr_by_index("eth", i210_index, vpd->mac2);
	}

	static iomux_v3_cfg_t const misc_pads[] = {
	MX6_PAD_KEY_ROW2__GPIO4_IO11 \| MUX_PAD_CTRL(NO_PAD_CTRL),
	MX6_PAD_EIM_A25__GPIO5_IO02 \| MUX_PAD_CTRL(NC_PAD_CTRL),
	MX6_PAD_EIM_CS0__GPIO2_IO23 \| MUX_PAD_CTRL(NC_PAD_CTRL),
	MX6_PAD_EIM_CS1__GPIO2_IO24 \| MUX_PAD_CTRL(NC_PAD_CTRL),
	MX6_PAD_EIM_OE__GPIO2_IO25 \| MUX_PAD_CTRL(NC_PAD_CTRL),
	MX6_PAD_EIM_BCLK__GPIO6_IO31 \| MUX_PAD_CTRL(NC_PAD_CTRL),
	MX6_PAD_GPIO_1__GPIO1_IO01 \| MUX_PAD_CTRL(NC_PAD_CTRL),
	MX6_PAD_GPIO_9__WDOG1_B \| MUX_PAD_CTRL(NC_PAD_CTRL),
	};
	#define SUS_S3_OUT IMX_GPIO_NR(4, 11)
	#define WIFI_EN IMX_GPIO_NR(6, 14)

	int board_early_init_f(void)
	{
	imx_iomux_v3_setup_multiple_pads(misc_pads,
	ARRAY_SIZE(misc_pads));

	#if defined(CONFIG_VIDEO_IPUV3)
	/* Set LDB clock to Video PLL */
	select_ldb_di_clock_source(MXC_PLL5_CLK);
	#endif
	return 0;
	}

	static void set_confidx(const struct vpd_cache* vpd)
	{
	switch (vpd->product_id) {
	case VPD_PRODUCT_B450:
	confidx = 1;
	break;
	case VPD_PRODUCT_B650:
	confidx = 2;
	break;
	case VPD_PRODUCT_B850:
	confidx = 3;
	break;
	}
	}

	int board_init(void)
	{
	if (!read_vpd(&vpd, vpd_callback)) {
	int ret, rescan;

	vpd.is_read = true;
	set_confidx(&vpd);

	ret = fdtdec_resetup(&rescan);
	if (!ret && rescan) {
	dm_uninit();
	dm_init_and_scan(false);
	}
	}

	gpio_request(SUS_S3_OUT, "sus_s3_out");
	gpio_direction_output(SUS_S3_OUT, 1);

	gpio_request(WIFI_EN, "wifi_en");
	gpio_direction_output(WIFI_EN, 1);

	#if defined(CONFIG_VIDEO_IPUV3)
	if (is_b850v3())
	setup_display_b850v3();
	else
	setup_display_bx50v3();
	#endif

	/* address of boot parameters */
	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;

	return 0;
	}

	#ifdef CONFIG_CMD_BMODE
	static const struct boot_mode board_boot_modes[] = {
	/* 4 bit bus width */
	{"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
	{"sd3", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
	{NULL, 0},
	};
	#endif

	void pmic_init(void)
	{
	struct udevice *reg;
	int ret, i;
	static const char * const bucks[] = {
	"bcore1",
	"bcore2",
	"bpro",
	"bmem",
	"bio",
	"bperi",
	};

	for (i = 0; i < ARRAY_SIZE(bucks); i++) {
	ret = regulator_get_by_devname(bucks[i], &reg);
	if (reg < 0) {
	printf("%s(): Unable to get regulator %s: %d\n",
	__func__, bucks[i], ret);
	continue;
	}
	regulator_set_mode(reg, DA9063_BUCKMODE_SYNC);
	}
	}

	int board_late_init(void)
	{
	process_vpd(&vpd);

	#ifdef CONFIG_CMD_BMODE
	add_board_boot_modes(board_boot_modes);
	#endif

	if (is_b850v3())
	env_set("videoargs", "video=DP-1:1024x768@60 video=HDMI-A-1:1024x768@60");
	else
	env_set("videoargs", "video=LVDS-1:1024x768@65");

	/* board specific pmic init */
	pmic_init();

	check_time();

	pci_init();

	return 0;
	}

	/*
	* Removes the 'eth[0-9]*addr' environment variable with the given index
	*
	* @param index [in] the index of the eth_device whose variable is to be removed
	*/
	static void remove_ethaddr_env_var(int index)
	{
	char env_var_name[9];

	sprintf(env_var_name, index == 0 ? "ethaddr" : "eth%daddr", index);
	env_set(env_var_name, NULL);
	}

	int last_stage_init(void)
	{
	int i;

	/*
	* Remove first three ethaddr which may have been created by
	* function process_vpd().
	*/
	for (i = 0; i < 3; ++i)
	remove_ethaddr_env_var(i);

	return 0;
	}

	int checkboard(void)
	{
	printf("BOARD: %s\n", CONFIG_BOARD_NAME);
	return 0;
	}

	#ifdef CONFIG_OF_BOARD_SETUP
	int ft_board_setup(void blob, bd_t bd)
	{
	char *rtc_status = env_get("rtc_status");

	fdt_setprop(blob, 0, "ge,boot-ver", version_string,
	strlen(version_string) + 1);

	fdt_setprop(blob, 0, "ge,rtc-status", rtc_status,
	strlen(rtc_status) + 1);
	return 0;
	}
	#endif

	int board_fit_config_name_match(const char *name)
	{
	if (!vpd.is_read)
	return strcmp(name, "imx6q-bx50v3");

	switch (vpd.product_id) {
	case VPD_PRODUCT_B450:
	return strcmp(name, "imx6q-b450v3");
	case VPD_PRODUCT_B650:
	return strcmp(name, "imx6q-b650v3");
	case VPD_PRODUCT_B850:
	return strcmp(name, "imx6q-b850v3");
	default:
	return -1;
	}
	}

	int embedded_dtb_select(void)
	{
	vpd.is_read = false;
	return fdtdec_setup();
	}