| /** |
| * @file IxHssAcc.h |
| * |
| * @date 07-DEC-2001 |
| * |
| * @brief This file contains the public API of the IXP400 HSS Access |
| * component |
| * |
| * |
| * @par |
| * IXP400 SW Release version 2.0 |
| * |
| * -- Copyright Notice -- |
| * |
| * @par |
| * Copyright 2001-2005, Intel Corporation. |
| * All rights reserved. |
| * |
| * @par |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the name of the Intel Corporation nor the names of its contributors |
| * may be used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * @par |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| * |
| * @par |
| * -- End of Copyright Notice -- |
| */ |
| |
| /* ------------------------------------------------------ |
| Doxygen group definitions |
| ------------------------------------------------------ */ |
| /** |
| * @defgroup IxHssAccAPI IXP400 HSS Access (IxHssAcc) API |
| * |
| * @brief The public API for the IXP400 HssAccess component |
| * |
| * IxHssAcc is the access layer to the HSS packetised and channelised |
| * services |
| * |
| * <b> Design Notes </b><br> |
| * <UL> |
| * <LI>When a packet-pipe is configured for 56Kbps RAW mode, byte alignment of |
| * the transmitted data is not preserved. All raw data that is transmitted |
| * will be received in proper order by the receiver, but the first bit of |
| * the packet may be seen at any offset within a byte; all subsequent bytes |
| * will have the same offset for the duration of the packet. The same offset |
| * also applies to all subsequent packets received on the packet-pipe too. |
| * (Similar results will occur for data received from remote end.) While |
| * this behavior will also occur for 56Kbps HDLC mode, the HDLC |
| * encoding/decoding will preserve the original byte alignment at the |
| * receiver end. |
| * </UL> |
| * |
| * <b> 56Kbps Packetised Service Bandwidth Limitation </b><br> |
| * <UL> |
| * <LI>IxHssAcc supports 56Kbps packetised service at a maximum aggregate rate |
| * for all HSS ports/HDLC channels of 12.288Mbps[1] in each direction, i.e. |
| * it supports 56Kbps packetised service on up to 8 T1 trunks. It does |
| * not support 56Kbps packetised service on 8 E1 trunks (i.e. 4 trunks per |
| * HSS port) unless those trunks are running 'fractional E1' with maximum |
| * aggregate rate of 12.288 Mbps in each direction.<br> |
| * [1] 12.288Mbps = 1.536Mbp * 8 T1 |
| * </UL> |
| * @{ */ |
| |
| #ifndef IXHSSACC_H |
| #define IXHSSACC_H |
| |
| #include "IxOsal.h" |
| |
| /* |
| * #defines for function return types, etc. |
| */ |
| |
| /** |
| * @def IX_HSSACC_TSLOTS_PER_HSS_PORT |
| * |
| * @brief The max number of TDM timeslots supported per HSS port - 4E1's = |
| * 32x4 = 128 |
| */ |
| #define IX_HSSACC_TSLOTS_PER_HSS_PORT 128 |
| |
| /* ----------------------------------------------------------- |
| The following are HssAccess return values returned through |
| service interfaces. The globally defined IX_SUCCESS (0) and |
| IX_FAIL (1) in IxOsalTypes.h are also used. |
| ----------------------------------------------------------- */ |
| /** |
| * @def IX_HSSACC_PARAM_ERR |
| * |
| * @brief HssAccess function return value for a parameter error |
| */ |
| #define IX_HSSACC_PARAM_ERR 2 |
| |
| /** |
| * @def IX_HSSACC_RESOURCE_ERR |
| * |
| * @brief HssAccess function return value for a resource error |
| */ |
| #define IX_HSSACC_RESOURCE_ERR 3 |
| |
| /** |
| * @def IX_HSSACC_PKT_DISCONNECTING |
| * |
| * @brief Indicates that a disconnect call is progressing and will |
| * disconnect soon |
| */ |
| #define IX_HSSACC_PKT_DISCONNECTING 4 |
| |
| /** |
| * @def IX_HSSACC_Q_WRITE_OVERFLOW |
| * |
| * @brief Indicates that an attempt to Tx or to replenish an |
| * RxFree Q failed due to Q overflow. |
| */ |
| #define IX_HSSACC_Q_WRITE_OVERFLOW 5 |
| |
| /* ------------------------------------------------------------------- |
| The following errors are HSS/NPE errors returned on error retrieval |
| ------------------------------------------------------------------- */ |
| /** |
| * @def IX_HSSACC_NO_ERROR |
| * |
| * @brief HSS port no error present |
| */ |
| #define IX_HSSACC_NO_ERROR 0 |
| |
| /** |
| * @def IX_HSSACC_TX_FRM_SYNC_ERR |
| * |
| * @brief HSS port TX Frame Sync error |
| */ |
| #define IX_HSSACC_TX_FRM_SYNC_ERR 1 |
| |
| /** |
| * @def IX_HSSACC_TX_OVER_RUN_ERR |
| * |
| * @brief HSS port TX over-run error |
| */ |
| #define IX_HSSACC_TX_OVER_RUN_ERR 2 |
| |
| /** |
| * @def IX_HSSACC_CHANNELISED_SW_TX_ERR |
| * |
| * @brief NPE software error in channelised TX |
| */ |
| #define IX_HSSACC_CHANNELISED_SW_TX_ERR 3 |
| |
| /** |
| * @def IX_HSSACC_PACKETISED_SW_TX_ERR |
| * |
| * @brief NPE software error in packetised TX |
| */ |
| #define IX_HSSACC_PACKETISED_SW_TX_ERR 4 |
| |
| /** |
| * @def IX_HSSACC_RX_FRM_SYNC_ERR |
| * |
| * @brief HSS port RX Frame Sync error |
| */ |
| #define IX_HSSACC_RX_FRM_SYNC_ERR 5 |
| |
| /** |
| * @def IX_HSSACC_RX_OVER_RUN_ERR |
| * |
| * @brief HSS port RX over-run error |
| */ |
| #define IX_HSSACC_RX_OVER_RUN_ERR 6 |
| |
| /** |
| * @def IX_HSSACC_CHANNELISED_SW_RX_ERR |
| * |
| * @brief NPE software error in channelised RX |
| */ |
| #define IX_HSSACC_CHANNELISED_SW_RX_ERR 7 |
| |
| /** |
| * @def IX_HSSACC_PACKETISED_SW_RX_ERR |
| * |
| * @brief NPE software error in packetised TX |
| */ |
| #define IX_HSSACC_PACKETISED_SW_RX_ERR 8 |
| |
| /* ----------------------------------- |
| Packetised service specific defines |
| ----------------------------------- */ |
| |
| /** |
| * @def IX_HSSACC_PKT_MIN_RX_MBUF_SIZE |
| * |
| * @brief Minimum size of the Rx mbuf in bytes which the client must supply |
| * to the component. |
| */ |
| #define IX_HSSACC_PKT_MIN_RX_MBUF_SIZE 64 |
| |
| /* -------------------------------------------------------------------- |
| Enumerated Types - these enumerated values may be used in setting up |
| the contents of hardware registers |
| -------------------------------------------------------------------- */ |
| /** |
| * @enum IxHssAccHssPort |
| * @brief The HSS port ID - There are two identical ports (0-1). |
| * |
| */ |
| typedef enum |
| { |
| IX_HSSACC_HSS_PORT_0, /**< HSS Port 0 */ |
| IX_HSSACC_HSS_PORT_1, /**< HSS Port 1 */ |
| IX_HSSACC_HSS_PORT_MAX /**< Delimiter for error checks */ |
| } IxHssAccHssPort; |
| |
| /** |
| * @enum IxHssAccHdlcPort |
| * @brief The HDLC port ID - There are four identical HDLC ports (0-3) per |
| * HSS port and they correspond to the 4 E1/T1 trunks. |
| * |
| */ |
| typedef enum |
| { |
| IX_HSSACC_HDLC_PORT_0, /**< HDLC Port 0 */ |
| IX_HSSACC_HDLC_PORT_1, /**< HDLC Port 1 */ |
| IX_HSSACC_HDLC_PORT_2, /**< HDLC Port 2 */ |
| IX_HSSACC_HDLC_PORT_3, /**< HDLC Port 3 */ |
| IX_HSSACC_HDLC_PORT_MAX /**< Delimiter for error checks */ |
| } IxHssAccHdlcPort; |
| |
| /** |
| * @enum IxHssAccTdmSlotUsage |
| * @brief The HSS TDM stream timeslot assignment types |
| * |
| */ |
| typedef enum |
| { |
| IX_HSSACC_TDMMAP_UNASSIGNED, /**< Unassigned */ |
| IX_HSSACC_TDMMAP_HDLC, /**< HDLC - packetised */ |
| IX_HSSACC_TDMMAP_VOICE56K, /**< Voice56K - channelised */ |
| IX_HSSACC_TDMMAP_VOICE64K, /**< Voice64K - channelised */ |
| IX_HSSACC_TDMMAP_MAX /**< Delimiter for error checks */ |
| } IxHssAccTdmSlotUsage; |
| |
| /** |
| * @enum IxHssAccFrmSyncType |
| * @brief The HSS frame sync pulse type |
| * |
| */ |
| typedef enum |
| { |
| IX_HSSACC_FRM_SYNC_ACTIVE_LOW, /**< Frame sync is sampled low */ |
| IX_HSSACC_FRM_SYNC_ACTIVE_HIGH, /**< sampled high */ |
| IX_HSSACC_FRM_SYNC_FALLINGEDGE, /**< sampled on a falling edge */ |
| IX_HSSACC_FRM_SYNC_RISINGEDGE, /**< sampled on a rising edge */ |
| IX_HSSACC_FRM_SYNC_TYPE_MAX /**< Delimiter for error checks */ |
| } IxHssAccFrmSyncType; |
| |
| /** |
| * @enum IxHssAccFrmSyncEnable |
| * @brief The IxHssAccFrmSyncEnable determines how the frame sync pulse is |
| * used |
| * */ |
| typedef enum |
| { |
| IX_HSSACC_FRM_SYNC_INPUT, /**< Frame sync is sampled as an input */ |
| IX_HSSACC_FRM_SYNC_INVALID_VALUE, /**< 1 is not used */ |
| IX_HSSACC_FRM_SYNC_OUTPUT_FALLING, /**< Frame sync is an output generated |
| off a falling clock edge */ |
| IX_HSSACC_FRM_SYNC_OUTPUT_RISING, /**< Frame sync is an output generated |
| off a rising clock edge */ |
| IX_HSSACC_FRM_SYNC_ENABLE_MAX /**< Delimiter for error checks */ |
| } IxHssAccFrmSyncEnable; |
| |
| /** |
| * @enum IxHssAccClkEdge |
| * @brief IxHssAccClkEdge is used to determine the clk edge to use for |
| * framing and data |
| * |
| */ |
| typedef enum |
| { |
| IX_HSSACC_CLK_EDGE_FALLING, /**< Clock sampled off a falling edge */ |
| IX_HSSACC_CLK_EDGE_RISING, /**< Clock sampled off a rising edge */ |
| IX_HSSACC_CLK_EDGE_MAX /**< Delimiter for error checks */ |
| } IxHssAccClkEdge; |
| |
| /** |
| * @enum IxHssAccClkDir |
| * @brief The HSS clock direction |
| * |
| */ |
| typedef enum |
| { |
| IX_HSSACC_SYNC_CLK_DIR_INPUT, /**< Clock is an input */ |
| IX_HSSACC_SYNC_CLK_DIR_OUTPUT, /**< Clock is an output */ |
| IX_HSSACC_SYNC_CLK_DIR_MAX /**< Delimiter for error checks */ |
| } IxHssAccClkDir; |
| |
| /** |
| * @enum IxHssAccFrmPulseUsage |
| * @brief The HSS frame pulse usage |
| * |
| */ |
| typedef enum |
| { |
| IX_HSSACC_FRM_PULSE_ENABLED, /**< Generate/Receive frame pulses */ |
| IX_HSSACC_FRM_PULSE_DISABLED, /**< Disregard frame pulses */ |
| IX_HSSACC_FRM_PULSE_MAX /**< Delimiter for error checks */ |
| } IxHssAccFrmPulseUsage; |
| |
| /** |
| * @enum IxHssAccDataRate |
| * @brief The HSS Data rate in relation to the clock |
| * |
| */ |
| typedef enum |
| { |
| IX_HSSACC_CLK_RATE, /**< Data rate is at the configured clk speed */ |
| IX_HSSACC_HALF_CLK_RATE, /**< Data rate is half the configured clk speed */ |
| IX_HSSACC_DATA_RATE_MAX /**< Delimiter for error checks */ |
| } IxHssAccDataRate; |
| |
| /** |
| * @enum IxHssAccDataPolarity |
| * @brief The HSS data polarity type |
| * |
| */ |
| typedef enum |
| { |
| IX_HSSACC_DATA_POLARITY_SAME, /**< Don't invert data between NPE and |
| HSS FIFOs */ |
| IX_HSSACC_DATA_POLARITY_INVERT, /**< Invert data between NPE and HSS |
| FIFOs */ |
| IX_HSSACC_DATA_POLARITY_MAX /**< Delimiter for error checks */ |
| } IxHssAccDataPolarity; |
| |
| /** |
| * @enum IxHssAccBitEndian |
| * @brief HSS Data endianness |
| * |
| */ |
| typedef enum |
| { |
| IX_HSSACC_LSB_ENDIAN, /**< TX/RX Least Significant Bit first */ |
| IX_HSSACC_MSB_ENDIAN, /**< TX/RX Most Significant Bit first */ |
| IX_HSSACC_ENDIAN_MAX /**< Delimiter for the purposes of error checks */ |
| } IxHssAccBitEndian; |
| |
| |
| /** |
| * @enum IxHssAccDrainMode |
| * @brief Tx pin open drain mode |
| * |
| */ |
| typedef enum |
| { |
| IX_HSSACC_TX_PINS_NORMAL, /**< Normal mode */ |
| IX_HSSACC_TX_PINS_OPEN_DRAIN, /**< Open Drain mode */ |
| IX_HSSACC_TX_PINS_MAX /**< Delimiter for error checks */ |
| } IxHssAccDrainMode; |
| |
| /** |
| * @enum IxHssAccSOFType |
| * @brief HSS start of frame types |
| * |
| */ |
| typedef enum |
| { |
| IX_HSSACC_SOF_FBIT, /**< Framing bit transmitted and expected on rx */ |
| IX_HSSACC_SOF_DATA, /**< Framing bit not transmitted nor expected on rx */ |
| IX_HSSACC_SOF_MAX /**< Delimiter for error checks */ |
| } IxHssAccSOFType; |
| |
| /** |
| * @enum IxHssAccDataEnable |
| * @brief IxHssAccDataEnable is used to determine whether or not to drive |
| * the data pins |
| * |
| */ |
| typedef enum |
| { |
| IX_HSSACC_DE_TRI_STATE, /**< TRI-State the data pins */ |
| IX_HSSACC_DE_DATA, /**< Push data out the data pins */ |
| IX_HSSACC_DE_MAX /**< Delimiter for error checks */ |
| } IxHssAccDataEnable; |
| |
| /** |
| * @enum IxHssAccTxSigType |
| * @brief IxHssAccTxSigType is used to determine how to drive the data pins |
| * |
| */ |
| typedef enum |
| { |
| IX_HSSACC_TXSIG_LOW, /**< Drive the data pins low */ |
| IX_HSSACC_TXSIG_HIGH, /**< Drive the data pins high */ |
| IX_HSSACC_TXSIG_HIGH_IMP, /**< Drive the data pins with high impedance */ |
| IX_HSSACC_TXSIG_MAX /**< Delimiter for error checks */ |
| } IxHssAccTxSigType; |
| |
| /** |
| * @enum IxHssAccFbType |
| * @brief IxHssAccFbType determines how to drive the Fbit |
| * |
| * @warning This will only be used for T1 @ 1.544MHz |
| * |
| */ |
| typedef enum |
| { |
| IX_HSSACC_FB_FIFO, /**< Fbit is dictated in FIFO */ |
| IX_HSSACC_FB_HIGH_IMP, /**< Fbit is high impedance */ |
| IX_HSSACC_FB_MAX /**< Delimiter for error checks */ |
| } IxHssAccFbType; |
| |
| /** |
| * @enum IxHssAcc56kEndianness |
| * @brief 56k data endianness when using the 56k type |
| * |
| */ |
| typedef enum |
| { |
| IX_HSSACC_56KE_BIT_7_UNUSED, /**< High bit is unused */ |
| IX_HSSACC_56KE_BIT_0_UNUSED, /**< Low bit is unused */ |
| IX_HSSACC_56KE_MAX /**< Delimiter for error checks */ |
| } IxHssAcc56kEndianness; |
| |
| /** |
| * @enum IxHssAcc56kSel |
| * @brief 56k data transmission type when using the 56k type |
| * |
| */ |
| typedef enum |
| { |
| IX_HSSACC_56KS_32_8_DATA, /**< 32/8 bit data */ |
| IX_HSSACC_56KS_56K_DATA, /**< 56K data */ |
| IX_HSSACC_56KS_MAX /**< Delimiter for error checks */ |
| } IxHssAcc56kSel; |
| |
| |
| /** |
| * @enum IxHssAccClkSpeed |
| * @brief IxHssAccClkSpeed represents the HSS clock speeds available |
| * |
| */ |
| typedef enum |
| { |
| IX_HSSACC_CLK_SPEED_512KHZ, /**< 512KHz */ |
| IX_HSSACC_CLK_SPEED_1536KHZ, /**< 1.536MHz */ |
| IX_HSSACC_CLK_SPEED_1544KHZ, /**< 1.544MHz */ |
| IX_HSSACC_CLK_SPEED_2048KHZ, /**< 2.048MHz */ |
| IX_HSSACC_CLK_SPEED_4096KHZ, /**< 4.096MHz */ |
| IX_HSSACC_CLK_SPEED_8192KHZ, /**< 8.192MHz */ |
| IX_HSSACC_CLK_SPEED_MAX /**< Delimiter for error checking */ |
| } IxHssAccClkSpeed; |
| |
| /** |
| * @enum IxHssAccPktStatus |
| * @brief Indicates the status of packets passed to the client |
| * |
| */ |
| typedef enum |
| { |
| IX_HSSACC_PKT_OK, /**< Error free.*/ |
| IX_HSSACC_STOP_SHUTDOWN_ERROR, /**< Errored due to stop or shutdown |
| occurrance.*/ |
| IX_HSSACC_HDLC_ALN_ERROR, /**< HDLC alignment error */ |
| IX_HSSACC_HDLC_FCS_ERROR, /**< HDLC Frame Check Sum error.*/ |
| IX_HSSACC_RXFREE_Q_EMPTY_ERROR, /**< RxFree Q became empty |
| while receiving this packet.*/ |
| IX_HSSACC_HDLC_MAX_FRAME_SIZE_EXCEEDED, /**< HDLC frame size |
| received is greater than |
| max specified at connect.*/ |
| IX_HSSACC_HDLC_ABORT_ERROR, /**< HDLC frame received is invalid due to an |
| abort sequence received.*/ |
| IX_HSSACC_DISCONNECT_IN_PROGRESS /**< Packet returned |
| because a disconnect is in progress */ |
| } IxHssAccPktStatus; |
| |
| |
| /** |
| * @enum IxHssAccPktCrcType |
| * @brief HDLC CRC type |
| * |
| */ |
| typedef enum |
| { |
| IX_HSSACC_PKT_16_BIT_CRC = 16, /**< 16 bit CRC is being used */ |
| IX_HSSACC_PKT_32_BIT_CRC = 32 /**< 32 bit CRC is being used */ |
| } IxHssAccPktCrcType; |
| |
| /** |
| * @enum IxHssAccPktHdlcIdleType |
| * @brief HDLC idle transmission type |
| * |
| */ |
| typedef enum |
| { |
| IX_HSSACC_HDLC_IDLE_ONES, /**< idle tx/rx will be a succession of ones */ |
| IX_HSSACC_HDLC_IDLE_FLAGS /**< idle tx/rx will be repeated flags */ |
| } IxHssAccPktHdlcIdleType; |
| |
| /** |
| * @brief Structure containing HSS port configuration parameters |
| * |
| * Note: All of these are used for TX. Only some are specific to RX. |
| * |
| */ |
| typedef struct |
| { |
| IxHssAccFrmSyncType frmSyncType; /**< frame sync pulse type (tx/rx) */ |
| IxHssAccFrmSyncEnable frmSyncIO; /**< how the frame sync pulse is |
| used (tx/rx) */ |
| IxHssAccClkEdge frmSyncClkEdge; /**< frame sync clock edge type |
| (tx/rx) */ |
| IxHssAccClkEdge dataClkEdge; /**< data clock edge type (tx/rx) */ |
| IxHssAccClkDir clkDirection; /**< clock direction (tx/rx) */ |
| IxHssAccFrmPulseUsage frmPulseUsage; /**< whether to use the frame sync |
| pulse or not (tx/rx) */ |
| IxHssAccDataRate dataRate; /**< data rate in relation to the |
| clock (tx/rx) */ |
| IxHssAccDataPolarity dataPolarity; /**< data polarity type (tx/rx) */ |
| IxHssAccBitEndian dataEndianness; /**< data endianness (tx/rx) */ |
| IxHssAccDrainMode drainMode; /**< tx pin open drain mode (tx) */ |
| IxHssAccSOFType fBitUsage; /**< start of frame types (tx/rx) */ |
| IxHssAccDataEnable dataEnable; /**< whether or not to drive the data |
| pins (tx) */ |
| IxHssAccTxSigType voice56kType; /**< how to drive the data pins for |
| voice56k type (tx) */ |
| IxHssAccTxSigType unassignedType; /**< how to drive the data pins for |
| unassigned type (tx) */ |
| IxHssAccFbType fBitType; /**< how to drive the Fbit (tx) */ |
| IxHssAcc56kEndianness voice56kEndian;/**< 56k data endianness when using |
| the 56k type (tx) */ |
| IxHssAcc56kSel voice56kSel; /**< 56k data transmission type when |
| using the 56k type (tx) */ |
| unsigned frmOffset; /**< frame pulse offset in bits wrt |
| the first timeslot (0-1023) (tx/rx) */ |
| unsigned maxFrmSize; /**< frame size in bits (1-1024) |
| (tx/rx) */ |
| } IxHssAccPortConfig; |
| |
| /** |
| * @brief Structure containing HSS configuration parameters |
| * |
| */ |
| typedef struct |
| { |
| IxHssAccPortConfig txPortConfig; /**< HSS tx port configuration */ |
| IxHssAccPortConfig rxPortConfig; /**< HSS rx port configuration */ |
| unsigned numChannelised; /**< The number of channelised |
| timeslots (0-32) */ |
| unsigned hssPktChannelCount; /**< The number of packetised |
| clients (0 - 4) */ |
| UINT8 channelisedIdlePattern; /**< The byte to be transmitted on |
| channelised service when there |
| is no client data to tx */ |
| BOOL loopback; /**< The HSS loopback state */ |
| unsigned packetizedIdlePattern; /**< The data to be transmitted on |
| packetised service when there is |
| no client data to tx */ |
| IxHssAccClkSpeed clkSpeed; /**< The HSS clock speed */ |
| } IxHssAccConfigParams; |
| |
| /** |
| * @brief This structure contains 56Kbps, HDLC-mode configuration parameters |
| * |
| */ |
| typedef struct |
| { |
| BOOL hdlc56kMode; /**< 56kbps(true)/64kbps(false) HDLC */ |
| IxHssAcc56kEndianness hdlc56kEndian; /**< 56kbps data endianness |
| - ignored if hdlc56kMode is false*/ |
| BOOL hdlc56kUnusedBitPolarity0; /**< The polarity '0'(true)/'1'(false) of the unused |
| bit while in 56kbps mode |
| - ignored if hdlc56kMode is false*/ |
| } IxHssAccHdlcMode; |
| |
| /** |
| * @brief This structure contains information required by the NPE to |
| * configure the HDLC co-processor |
| * |
| */ |
| typedef struct |
| { |
| IxHssAccPktHdlcIdleType hdlcIdleType; /**< What to transmit when a HDLC port is idle */ |
| IxHssAccBitEndian dataEndian; /**< The HDLC data endianness */ |
| IxHssAccPktCrcType crcType; /**< The CRC type to be used for this HDLC port */ |
| } IxHssAccPktHdlcFraming; |
| |
| /** |
| * @typedef UINT32 IxHssAccPktUserId |
| * |
| * @brief The client supplied value which will be supplied as a parameter |
| * with a given callback. |
| * |
| * This value will be passed into the ixHssAccPktPortConnect function once each |
| * with given callbacks. This value will then be passed back to the client |
| * as one of the parameters to each of these callbacks, |
| * when these callbacks are called. |
| */ |
| typedef UINT32 IxHssAccPktUserId; |
| |
| |
| /** |
| * @typedef IxHssAccLastErrorCallback |
| * @brief Prototype of the clients function to accept notification of the |
| * last error |
| * |
| * This function is registered through the config. The client will initiate |
| * the last error retrieval. The HssAccess component will send a message to |
| * the NPE through the NPE Message Handler. When a response to the read is |
| * received, the NPE Message Handler will callback the HssAccess component |
| * which will execute this function in the same IxNpeMh context. The client |
| * will be passed the last error and the related service port (packetised |
| * 0-3, channelised 0) |
| * |
| * @param lastHssError unsigned [in] - The last Hss error registered that |
| * has been registered. |
| * @param servicePort unsigned [in] - This is the service port number. |
| * (packetised 0-3, channelised 0) |
| * |
| * @return void |
| */ |
| typedef void (*IxHssAccLastErrorCallback) (unsigned lastHssError, |
| unsigned servicePort); |
| |
| /** |
| * @typedef IxHssAccPktRxCallback |
| * @brief Prototype of the clients function to accept notification of |
| * packetised rx |
| * |
| * This function is registered through the ixHssAccPktPortConnect. hssPktAcc will pass |
| * received data in the form of mbufs to the client. The mbuf passed back |
| * to the client could contain a chain of buffers, depending on the packet |
| * size received. |
| * |
| * @param *buffer @ref IX_OSAL_MBUF [in] - This is the mbuf which contains the |
| * payload received. |
| * @param numHssErrs unsigned [in] - This is the number of hssErrors |
| * the Npe has received |
| * @param pktStatus @ref IxHssAccPktStatus [in] - This is the status of the |
| * mbuf that has been received. |
| * @param rxUserId @ref IxHssAccPktUserId [in] - This is the client supplied value |
| * passed in at ixHssAccPktPortConnect time which is now returned to the client. |
| * |
| * @return void |
| */ |
| typedef void (*IxHssAccPktRxCallback) (IX_OSAL_MBUF *buffer, |
| unsigned numHssErrs, |
| IxHssAccPktStatus pktStatus, |
| IxHssAccPktUserId rxUserId); |
| |
| /** |
| * @typedef IxHssAccPktRxFreeLowCallback |
| * @brief Prototype of the clients function to accept notification of |
| * requirement of more Rx Free buffers |
| * |
| * The client can choose to register a callback of this type when |
| * calling a connecting. This function is registered through the ixHssAccPktPortConnect. |
| * If defined, the access layer will provide the trigger for |
| * this callback. The callback will be responsible for supplying mbufs to |
| * the access layer for use on the receive path from the HSS using |
| * ixHssPktAccFreeBufReplenish. |
| * |
| * @return void |
| */ |
| typedef void (*IxHssAccPktRxFreeLowCallback) (IxHssAccPktUserId rxFreeLowUserId); |
| |
| /** |
| * @typedef IxHssAccPktTxDoneCallback |
| * @brief Prototype of the clients function to accept notification of |
| * completion with Tx buffers |
| * |
| * This function is registered through the ixHssAccPktPortConnect. It enables |
| * the hssPktAcc to pass buffers back to the client |
| * when transmission is complete. |
| * |
| * @param *buffer @ref IX_OSAL_MBUF [in] - This is the mbuf which contained |
| * the payload that was for Tx. |
| * @param numHssErrs unsigned [in] - This is the number of hssErrors |
| * the Npe has received |
| * @param pktStatus @ref IxHssAccPktStatus [in] - This is the status of the |
| * mbuf that has been transmitted. |
| * @param txDoneUserId @ref IxHssAccPktUserId [in] - This is the client supplied value |
| * passed in at ixHssAccPktPortConnect time which is now returned to the client. |
| * |
| * @return void |
| */ |
| typedef void (*IxHssAccPktTxDoneCallback) (IX_OSAL_MBUF *buffer, |
| unsigned numHssErrs, |
| IxHssAccPktStatus pktStatus, |
| IxHssAccPktUserId txDoneUserId); |
| |
| /** |
| * @typedef IxHssAccChanRxCallback |
| * @brief Prototype of the clients function to accept notification of |
| * channelised rx |
| * |
| * This callback, if defined by the client in the connect, will get called |
| * in the context of an IRQ. The IRQ will be triggered when the hssSyncQMQ |
| * is not empty. The queued entry will be dequeued and this function will |
| * be executed. |
| * |
| * @param hssPortId @ref IxHssAccHssPort - The HSS port Id. There are two |
| * identical ports (0-1). |
| * @param txOffset unsigned [in] - an offset indicating from where within |
| * the txPtrList the NPE is currently transmitting from. |
| * @param rxOffset unsigned [in] - an offset indicating where within the |
| * receive buffers the NPE has just written the received data to. |
| * @param numHssErrs unsigned [in] - This is the number of hssErrors |
| * the Npe has received |
| * |
| * @return void |
| */ |
| typedef void (*IxHssAccChanRxCallback) (IxHssAccHssPort hssPortId, |
| unsigned rxOffset, |
| unsigned txOffset, |
| unsigned numHssErrs); |
| |
| /* |
| * Prototypes for interface functions. |
| */ |
| |
| /** |
| * |
| * @ingroup IxHssAccAPI |
| * |
| * @fn IX_STATUS ixHssAccPortInit (IxHssAccHssPort hssPortId, |
| IxHssAccConfigParams *configParams, |
| IxHssAccTdmSlotUsage *tdmMap, |
| IxHssAccLastErrorCallback lastHssErrorCallback) |
| * |
| * @brief Initialise a HSS port. No channelised or packetised connections |
| * should exist in the HssAccess layer while this interface is being called. |
| * |
| * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two |
| * identical ports (0-1). |
| * @param *configParams @ref IxHssAccConfigParams [in] - A pointer to the HSS |
| * configuration structure |
| * @param *tdmMap @ref IxHssAccTdmSlotUsage [in] - A pointer to an array of size |
| * IX_HSSACC_TSLOTS_PER_HSS_PORT, defining the slot usage over the HSS port |
| * @param lastHssErrorCallback @ref IxHssAccLastErrorCallback [in] - Client |
| * callback to report last error |
| * |
| * @return |
| * - IX_SUCCESS The function executed successfully |
| * - IX_FAIL The function did not execute successfully |
| * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a |
| * parameter error |
| */ |
| PUBLIC IX_STATUS |
| ixHssAccPortInit (IxHssAccHssPort hssPortId, |
| IxHssAccConfigParams *configParams, |
| IxHssAccTdmSlotUsage *tdmMap, |
| IxHssAccLastErrorCallback lastHssErrorCallback); |
| |
| /** |
| * |
| * @ingroup IxHssAccAPI |
| * |
| * @fn IX_STATUS ixHssAccLastErrorRetrievalInitiate ( |
| IxHssAccHssPort hssPortId) |
| * |
| * @brief Initiate the retrieval of the last HSS error. The HSS port |
| * should be configured before attempting to call this interface. |
| * |
| * @param hssPortId @ref IxHssAccHssPort [in] - the HSS port ID |
| * |
| * @return |
| * - IX_SUCCESS The function executed successfully |
| * - IX_FAIL The function did not execute successfully |
| * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a |
| * parameter error |
| */ |
| PUBLIC IX_STATUS |
| ixHssAccLastErrorRetrievalInitiate (IxHssAccHssPort hssPortId); |
| |
| |
| /** |
| * |
| * @ingroup IxHssAccAPI |
| * |
| * @fn IX_STATUS ixHssAccInit () |
| * |
| * @brief This function is responsible for initialising resources for use |
| * by the packetised and channelised clients. It should be called after |
| * HSS NPE image has been downloaded into NPE-A and before any other |
| * HssAccess interface is called. |
| * No other HssAccPacketised interface should be called while this interface |
| * is being processed. |
| * |
| * @return |
| * - IX_SUCCESS The function executed successfully |
| * - IX_FAIL The function did not execute successfully |
| * - IX_HSSACC_RESOURCE_ERR The function did not execute successfully due |
| * to a resource error |
| */ |
| PUBLIC IX_STATUS |
| ixHssAccInit (void); |
| |
| |
| /** |
| * |
| * @ingroup IxHssAccAPI |
| * |
| * @fn ixHssAccPktPortConnect (IxHssAccHssPort hssPortId, |
| IxHssAccHdlcPort hdlcPortId, |
| BOOL hdlcFraming, |
| IxHssAccHdlcMode hdlcMode, |
| BOOL hdlcBitInvert, |
| unsigned blockSizeInWords, |
| UINT32 rawIdleBlockPattern, |
| IxHssAccPktHdlcFraming hdlcTxFraming, |
| IxHssAccPktHdlcFraming hdlcRxFraming, |
| unsigned frmFlagStart, |
| IxHssAccPktRxCallback rxCallback, |
| IxHssAccPktUserId rxUserId, |
| IxHssAccPktRxFreeLowCallback rxFreeLowCallback, |
| IxHssAccPktUserId rxFreeLowUserId, |
| IxHssAccPktTxDoneCallback txDoneCallback, |
| IxHssAccPktUserId txDoneUserId) |
| * |
| * @brief This function is responsible for connecting a client to one of |
| * the 4 available HDLC ports. The HSS port should be configured before |
| * attempting a connect. No other HssAccPacketised interface should be |
| * called while this connect is being processed. |
| * |
| * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two |
| * identical ports (0-1). |
| * @param hdlcPortId @ref IxHssAccHdlcPort [in] - This is the number of the HDLC port and |
| * it corresponds to the physical E1/T1 trunk i.e. 0, 1, 2, 3 |
| * @param hdlcFraming BOOL [in] - This value determines whether the service |
| * will use HDLC data or the debug, raw data type i.e. no HDLC processing |
| * @param hdlcMode @ref IxHssAccHdlcMode [in] - This structure contains 56Kbps, HDLC-mode |
| * configuration parameters |
| * @param hdlcBitInvert BOOL [in] - This value determines whether bit inversion |
| * will occur between HDLC and HSS co-processors i.e. post-HDLC processing for |
| * transmit and pre-HDLC processing for receive, for the specified HDLC Termination |
| * Point |
| * @param blockSizeInWords unsigned [in] - The max tx/rx block size |
| * @param rawIdleBlockPattern UINT32 [in] - Tx idle pattern in raw mode |
| * @param hdlcTxFraming @ref IxHssAccPktHdlcFraming [in] - This structure contains |
| * the following information required by the NPE to configure the HDLC |
| * co-processor for TX |
| * @param hdlcRxFraming @ref IxHssAccPktHdlcFraming [in] - This structure contains |
| * the following information required by the NPE to configure the HDLC |
| * co-processor for RX |
| * @param frmFlagStart unsigned - Number of flags to precede to |
| * transmitted flags (0-2). |
| * @param rxCallback @ref IxHssAccPktRxCallback [in] - Pointer to |
| * the clients packet receive function. |
| * @param rxUserId @ref IxHssAccPktUserId [in] - The client supplied rx value |
| * to be passed back as an argument to the supplied rxCallback |
| * @param rxFreeLowCallback @ref IxHssAccPktRxFreeLowCallback [in] - Pointer to |
| * the clients Rx free buffer request function. If NULL, assume client will |
| * trigger independently. |
| * @param rxFreeLowUserId @ref IxHssAccPktUserId [in] - The client supplied RxFreeLow value |
| * to be passed back as an argument to the supplied rxFreeLowCallback |
| * @param txDoneCallback @ref IxHssAccPktTxDoneCallback [in] - Pointer to the |
| * clients Tx done callback function |
| * @param txDoneUserId @ref IxHssAccPktUserId [in] - The client supplied txDone value |
| * to be passed back as an argument to the supplied txDoneCallback |
| * |
| * @return |
| * - IX_SUCCESS The function executed successfully |
| * - IX_FAIL The function did not execute successfully |
| * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a |
| * parameter error |
| * - IX_HSSACC_RESOURCE_ERR The function did not execute successfully due |
| * to a resource error |
| */ |
| PUBLIC IX_STATUS |
| ixHssAccPktPortConnect (IxHssAccHssPort hssPortId, |
| IxHssAccHdlcPort hdlcPortId, |
| BOOL hdlcFraming, |
| IxHssAccHdlcMode hdlcMode, |
| BOOL hdlcBitInvert, |
| unsigned blockSizeInWords, |
| UINT32 rawIdleBlockPattern, |
| IxHssAccPktHdlcFraming hdlcTxFraming, |
| IxHssAccPktHdlcFraming hdlcRxFraming, |
| unsigned frmFlagStart, |
| IxHssAccPktRxCallback rxCallback, |
| IxHssAccPktUserId rxUserId, |
| IxHssAccPktRxFreeLowCallback rxFreeLowCallback, |
| IxHssAccPktUserId rxFreeLowUserId, |
| IxHssAccPktTxDoneCallback txDoneCallback, |
| IxHssAccPktUserId txDoneUserId); |
| |
| /** |
| * |
| * @ingroup IxHssAccAPI |
| * |
| * @fn IX_STATUS ixHssAccPktPortEnable (IxHssAccHssPort hssPortId, |
| IxHssAccHdlcPort hdlcPortId) |
| * |
| * @brief This function is responsible for enabling a packetised service |
| * for the specified HSS/HDLC port combination. It enables the RX flow. The |
| * client must have already connected to a packetised service and is responsible |
| * for ensuring an adequate amount of RX mbufs have been supplied to the access |
| * component before enabling the packetised service. This function must be called |
| * on a given port before any call to ixHssAccPktPortTx on the same port. |
| * No other HssAccPacketised interface should be called while this interface is |
| * being processed. |
| * |
| * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two |
| * identical ports (0-1). |
| * @param hdlcPortId @ref IxHssAccHdlcPort [in] - The port id (0,1,2,3) to enable the service |
| * on. |
| * |
| * @return |
| * - IX_SUCCESS The function executed successfully |
| * - IX_FAIL The function did not execute successfully |
| * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a |
| * parameter error |
| */ |
| PUBLIC IX_STATUS |
| ixHssAccPktPortEnable (IxHssAccHssPort hssPortId, |
| IxHssAccHdlcPort hdlcPortId); |
| |
| /** |
| * @fn IX_STATUS ixHssAccPktPortDisable (IxHssAccHssPort hssPortId, |
| IxHssAccHdlcPort hdlcPortId) |
| * |
| * @brief This function is responsible for disabling a packetised service |
| * for the specified HSS/HDLC port combination. It disables the RX flow. |
| * The client must have already connected to and enabled a packetised service |
| * for the specified HDLC port. This disable interface can be called before a |
| * disconnect, but is not required to. |
| * |
| * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two |
| * identical ports (0-1). |
| * @param hdlcPortId @ref IxHssAccHdlcPort [in] - The port id (0,1,2,3) to disable |
| * the service on. |
| * |
| * @return |
| * - IX_SUCCESS The function executed successfully |
| * - IX_FAIL The function did not execute successfully |
| * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a |
| * parameter error |
| */ |
| PUBLIC IX_STATUS |
| ixHssAccPktPortDisable (IxHssAccHssPort hssPortId, |
| IxHssAccHdlcPort hdlcPortId); |
| |
| /** |
| * |
| * @ingroup IxHssAccAPI |
| * |
| * @fn IX_STATUS ixHssAccPktPortDisconnect (IxHssAccHssPort hssPortId, |
| IxHssAccHdlcPort hdlcPortId) |
| * |
| * @brief This function is responsible for disconnecting a client from one |
| * of the 4 available HDLC ports. It is not required that the Rx Flow |
| * has been disabled before calling this function. If the RX Flow has not been |
| * disabled, the disconnect will disable it before proceeding with the |
| * disconnect. No other HssAccPacketised |
| * interface should be called while this interface is being processed. |
| * |
| * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two |
| * identical ports (0-1). |
| * @param hdlcPortId @ref IxHssAccHdlcPort [in] - This is the number of the HDLC port |
| * to disconnect and it corresponds to the physical E1/T1 trunk i.e. 0, 1, 2, 3 |
| * |
| * @return |
| * - IX_SUCCESS The function executed successfully |
| * - IX_FAIL The function did not execute successfully |
| * - IX_HSSACC_PKT_DISCONNECTING The function has initiated the disconnecting |
| * procedure but it has not completed yet. |
| */ |
| PUBLIC IX_STATUS |
| ixHssAccPktPortDisconnect (IxHssAccHssPort hssPortId, |
| IxHssAccHdlcPort hdlcPortId); |
| |
| /** |
| * |
| * @ingroup IxHssAccAPI |
| * |
| * @fn BOOL ixHssAccPktPortIsDisconnectComplete (IxHssAccHssPort hssPortId, |
| IxHssAccHdlcPort hdlcPortId) |
| * |
| * @brief This function is called to check if a given HSS/HDLC port |
| * combination is in a connected state or not. This function may be called |
| * at any time to determine a ports state. No other HssAccPacketised |
| * interface should be called while this interface is being processed. |
| * |
| * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two |
| * identical ports (0-1). |
| * @param hdlcPortId @ref IxHssAccHdlcPort [in] - This is the number of the HDLC port |
| * to disconnect and it corresponds to the physical E1/T1 trunk i.e. 0, 1, 2, 3 |
| * |
| * @return |
| * - true The state of this HSS/HDLC port combination is disconnected, |
| * so if a disconnect was called, it is now completed. |
| * - false The state of this HSS/HDLC port combination is connected, |
| * so if a disconnect was called, it is not yet completed. |
| */ |
| PUBLIC BOOL |
| ixHssAccPktPortIsDisconnectComplete (IxHssAccHssPort hssPortId, |
| IxHssAccHdlcPort hdlcPortId); |
| |
| |
| /** |
| * |
| * @ingroup IxHssAccAPI |
| * |
| * @fn IX_STATUS ixHssAccPktPortRxFreeReplenish (IxHssAccHssPort hssPortId, |
| IxHssAccHdlcPort hdlcPortId, |
| IX_OSAL_MBUF *buffer) |
| * |
| * @brief Function which the client calls at regular intervals to provide |
| * mbufs to the access component for RX. A connection should exist for |
| * the specified hssPortId/hdlcPortId combination before attempting to call this |
| * interface. Also, the connection should not be in a disconnecting state. |
| * |
| * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two |
| * identical ports (0-1). |
| * @param hdlcPortId @ref IxHssAccHdlcPort [in] - This is the number of the HDLC port |
| * and it corresponds to the physical E1/T1 trunk i.e. 0, 1, 2, 3 |
| * @param *buffer @ref IX_OSAL_MBUF [in] - A pointer to a free mbuf to filled with payload. |
| * |
| * @return |
| * - IX_SUCCESS The function executed successfully |
| * - IX_FAIL The function did not execute successfully |
| * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a |
| * parameter error |
| * - IX_HSSACC_RESOURCE_ERR The function did not execute successfully due |
| * to a resource error |
| * - IX_HSSACC_Q_WRITE_OVERFLOW The function did not succeed due to a Q |
| * overflow |
| */ |
| PUBLIC IX_STATUS |
| ixHssAccPktPortRxFreeReplenish (IxHssAccHssPort hssPortId, |
| IxHssAccHdlcPort hdlcPortId, |
| IX_OSAL_MBUF *buffer); |
| |
| /** |
| * |
| * @ingroup IxHssAccAPI |
| * |
| * @fn IX_STATUS ixHssAccPktPortTx (IxHssAccHssPort hssPortId, |
| IxHssAccHdlcPort hdlcPortId, |
| IX_OSAL_MBUF *buffer) |
| * |
| * @brief Function which the client calls when it wants to transmit |
| * packetised data. An enabled connection should exist on the specified |
| * hssPortId/hdlcPortId combination before attempting to call this interface. |
| * No other HssAccPacketised |
| * interface should be called while this interface is being processed. |
| * |
| * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two |
| * identical ports (0-1). |
| * @param hdlcPortId @ref IxHssAccHdlcPort [in] - This is the number of the HDLC port |
| * and it corresponds to the physical E1/T1 trunk i.e. 0, 1, 2, 3 |
| * @param *buffer @ref IX_OSAL_MBUF [in] - A pointer to a chain of mbufs which the |
| * client has filled with the payload |
| * |
| * @return |
| * - IX_SUCCESS The function executed successfully |
| * - IX_FAIL The function did not execute successfully |
| * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a |
| * parameter error |
| * - IX_HSSACC_RESOURCE_ERR The function did not execute successfully due |
| * to a resource error. See note. |
| * - IX_HSSACC_Q_WRITE_OVERFLOW The function did not succeed due to a Q |
| * overflow |
| * |
| * @note IX_HSSACC_RESOURCE_ERR is returned when a free descriptor cannot be |
| * obtained to send the chain of mbufs to the NPE. This is a normal scenario. |
| * HssAcc has a pool of descriptors and this error means that they are currently |
| * all in use. |
| * The recommended approach to this is to retry until a descriptor becomes free |
| * and the packet is successfully transmitted. |
| * Alternatively, the user could wait until the next IxHssAccPktTxDoneCallback |
| * callback is triggered, and then retry, as it is this event that causes a |
| * transmit descriptor to be freed. |
| */ |
| PUBLIC IX_STATUS |
| ixHssAccPktPortTx (IxHssAccHssPort hssPortId, |
| IxHssAccHdlcPort hdlcPortId, |
| IX_OSAL_MBUF *buffer); |
| |
| /** |
| * |
| * @ingroup IxHssAccAPI |
| * |
| * @fn IX_STATUS ixHssAccChanConnect (IxHssAccHssPort hssPortId, |
| unsigned bytesPerTSTrigger, |
| UINT8 *rxCircular, |
| unsigned numRxBytesPerTS, |
| UINT32 *txPtrList, |
| unsigned numTxPtrLists, |
| unsigned numTxBytesPerBlk, |
| IxHssAccChanRxCallback rxCallback) |
| * |
| * @brief This function allows the client to connect to the Tx/Rx NPE |
| * Channelised Service. There can only be one client per HSS port. The |
| * client is responsible for ensuring that the HSS port is configured |
| * appropriately before its connect request. No other HssAccChannelised |
| * interface should be called while this interface is being processed. |
| * |
| * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two |
| * identical ports (0-1). |
| * @param bytesPerTSTrigger unsigned [in] - The NPE will trigger the access |
| * component after bytesPerTSTrigger have been received for all trunk |
| * timeslots. This figure is a multiple of 8 e.g. 8 for 1ms trigger, 16 for |
| * 2ms trigger. |
| * @param *rxCircular UINT8 [in] - A pointer to memory allocated by the |
| * client to be filled by data received. The buffer at this address is part |
| * of a pool of buffers to be accessed in a circular fashion. This address |
| * will be written to by the NPE. Therefore, it needs to be a physical address. |
| * @param numRxBytesPerTS unsigned [in] - The number of bytes allocated per |
| * timeslot within the receive memory. This figure will depend on the |
| * latency of the system. It needs to be deep enough for data to be read by |
| * the client before the NPE re-writes over that memory e.g. if the client |
| * samples at a rate of 40bytes per timeslot, numRxBytesPerTS may need to |
| * be 40bytes * 3. This would give the client 3 * 5ms of time before |
| * received data is over-written. |
| * @param *txPtrList UINT32 [in] - The address of an area of contiguous |
| * memory allocated by the client to be populated with pointers to data for |
| * transmission. Each pointer list contains a pointer per active channel. |
| * The txPtrs will point to data to be transmitted by the NPE. Therefore, |
| * they must point to physical addresses. |
| * @param numTxPtrLists unsigned [in] - The number of pointer lists in |
| * txPtrList. This figure is dependent on jitter. |
| * @param numTxBytesPerBlk unsigned [in] - The size of the Tx data, in |
| * bytes, that each pointer within the PtrList points to. |
| * @param rxCallback @ref IxHssAccChanRxCallback [in] - A client function |
| * pointer to be called back to handle the actual tx/rx of channelised |
| * data. If this is not NULL, an ISR will call this function. If this |
| * pointer is NULL, it implies that the client will use a polling mechanism |
| * to detect when the tx and rx of channelised data is to occur. The client |
| * will use hssChanAccStatus for this. |
| * |
| * @return |
| * - IX_SUCCESS The function executed successfully |
| * - IX_FAIL The function did not execute successfully |
| * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a |
| * parameter error |
| */ |
| |
| PUBLIC IX_STATUS |
| ixHssAccChanConnect (IxHssAccHssPort hssPortId, |
| unsigned bytesPerTSTrigger, |
| UINT8 *rxCircular, |
| unsigned numRxBytesPerTS, |
| UINT32 *txPtrList, |
| unsigned numTxPtrLists, |
| unsigned numTxBytesPerBlk, |
| IxHssAccChanRxCallback rxCallback); |
| |
| /** |
| * |
| * @ingroup IxHssAccAPI |
| * |
| * @fn IX_STATUS ixHssAccChanPortEnable (IxHssAccHssPort hssPortId) |
| * |
| * @brief This function is responsible for enabling a channelised service |
| * for the specified HSS port. It enables the NPE RX flow. The client must |
| * have already connected to a channelised service before enabling the |
| * channelised service. No other HssAccChannelised |
| * interface should be called while this interface is being processed. |
| * |
| * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two |
| * identical ports (0-1). |
| * |
| * @return |
| * - IX_SUCCESS The function executed successfully |
| * - IX_FAIL The function did not execute successfully |
| * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a |
| * parameter error |
| */ |
| PUBLIC IX_STATUS |
| ixHssAccChanPortEnable (IxHssAccHssPort hssPortId); |
| |
| /** |
| * |
| * @ingroup IxHssAccAPI |
| * |
| * @fn IX_STATUS ixHssAccChanPortDisable (IxHssAccHssPort hssPortId) |
| * |
| * @brief This function is responsible for disabling a channelised service |
| * for the specified HSS port. It disables the NPE RX flow. The client must |
| * have already connected to and enabled a channelised service for the |
| * specified HSS port. This disable interface can be called before a |
| * disconnect, but is not required to. No other HssAccChannelised |
| * interface should be called while this interface is being processed. |
| * |
| * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two |
| * identical ports (0-1). |
| * |
| * @return |
| * - IX_SUCCESS The function executed successfully |
| * - IX_FAIL The function did not execute successfully |
| * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a |
| * parameter error |
| */ |
| PUBLIC IX_STATUS |
| ixHssAccChanPortDisable (IxHssAccHssPort hssPortId); |
| |
| /** |
| * |
| * @ingroup IxHssAccAPI |
| * |
| * @fn IX_STATUS ixHssAccChanDisconnect (IxHssAccHssPort hssPortId) |
| * |
| * @brief This function allows the client to Disconnect from a channelised |
| * service. If the NPE RX Flow has not been disabled, the disconnect will |
| * disable it before proceeding with other disconnect functionality. |
| * No other HssAccChannelised interface should be called while this |
| * interface is being processed. |
| * |
| * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two |
| * identical ports (0-1). |
| * |
| * @return |
| * - IX_SUCCESS The function executed successfully |
| * - IX_FAIL The function did not execute successfully |
| * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a |
| * parameter error |
| */ |
| PUBLIC IX_STATUS |
| ixHssAccChanDisconnect (IxHssAccHssPort hssPortId); |
| |
| /** |
| * |
| * @ingroup IxHssAccAPI |
| * |
| * @fn IX_STATUS ixHssAccChanStatusQuery (IxHssAccHssPort hssPortId, |
| BOOL *dataRecvd, |
| unsigned *rxOffset, |
| unsigned *txOffset, |
| unsigned *numHssErrs) |
| * |
| * @brief This function is called by the client to query whether or not |
| * channelised data has been received. If there is, hssChanAcc will return |
| * the details in the output parameters. An enabled connection should |
| * exist on the specified hssPortId before attempting to call this interface. |
| * No other HssAccChannelised interface should be called while this |
| * interface is being processed. |
| * |
| * @param hssPortId @ref IxHssAccHssPort [in] - The HSS port Id. There are two |
| * identical ports (0-1). |
| * @param *dataRecvd BOOL [out] - This BOOL indicates to the client whether |
| * or not the access component has read any data for the client. If |
| * false, the other output parameters will not have been written to. |
| * @param *rxOffset unsigned [out] - An offset to indicate to the client |
| * where within the receive buffers the NPE has just written the received |
| * data to. |
| * @param *txOffset unsigned [out] - An offset to indicate to the client |
| * from where within the txPtrList the NPE is currently transmitting from |
| * @param *numHssErrs unsigned [out] - The total number of HSS port errors |
| * since initial port configuration |
| * |
| * |
| * @return |
| * - IX_SUCCESS The function executed successfully |
| * - IX_FAIL The function did not execute successfully |
| * - IX_HSSACC_PARAM_ERR The function did not execute successfully due to a |
| * parameter error |
| */ |
| PUBLIC IX_STATUS |
| ixHssAccChanStatusQuery (IxHssAccHssPort hssPortId, |
| BOOL *dataRecvd, |
| unsigned *rxOffset, |
| unsigned *txOffset, |
| unsigned *numHssErrs); |
| |
| /** |
| * |
| * @ingroup IxHssAccAPI |
| * |
| * @fn void ixHssAccShow (void) |
| * |
| * @brief This function will display the current state of the IxHssAcc |
| * component. The output is sent to stdout. |
| * |
| * @return void |
| */ |
| PUBLIC void |
| ixHssAccShow (void); |
| |
| /** |
| * |
| * @ingroup IxHssAccAPI |
| * |
| * @fn void ixHssAccStatsInit (void) |
| * |
| * @brief This function will reset the IxHssAcc statistics. |
| * |
| * @return void |
| */ |
| PUBLIC void |
| ixHssAccStatsInit (void); |
| |
| #endif /* IXHSSACC_H */ |
| |
| /** |
| * @} defgroup IxHssAcc |
| */ |