| /** |
| * @file IxPerfProfAcc.h |
| * |
| * @brief Header file for the IXP400 Perf Prof component (IxPerfProfAcc) |
| * |
| * |
| * @par |
| * IXP400 SW Release version 2.0 |
| * |
| * -- Copyright Notice -- |
| * |
| * @par |
| * Copyright 2001-2005, Intel Corporation. |
| * All rights reserved. |
| * |
| * @par |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the name of the Intel Corporation nor the names of its contributors |
| * may be used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * @par |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| * |
| * @par |
| * -- End of Copyright Notice -- |
| */ |
| |
| /** |
| * @defgroup IxPerfProfAcc IXP400 Performance Profiling (IxPerfProfAcc) API |
| * |
| * @brief IXP400 Performance Profiling Utility component Public API. |
| * @li NOTE: Xcycle measurement is not supported in Linux. |
| * |
| * |
| * @{ |
| */ |
| #ifndef IXPERFPROFACC_H |
| #define IXPERFPROFACC_H |
| |
| #include "IxOsal.h" |
| |
| #ifdef __linux |
| #include <linux/proc_fs.h> |
| #endif |
| |
| /* |
| * Section for #define |
| */ |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @def IX_PERFPROF_ACC_XSCALE_PMU_MAX_PROFILE_SAMPLES |
| * |
| * @brief This is the maximum number of profiling samples allowed, which can be |
| * modified according to the user's discretion |
| */ |
| #define IX_PERFPROF_ACC_XSCALE_PMU_MAX_PROFILE_SAMPLES 0xFFFF |
| |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @def IX_PERFPROF_ACC_BUS_PMU_MAX_PECS |
| * |
| * @brief This is the maximum number of Programmable Event Counters available. |
| * This is a hardware specific and fixed value. Do not change. |
| * |
| */ |
| #define IX_PERFPROF_ACC_BUS_PMU_MAX_PECS 7 |
| |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @def IX_PERFPROF_ACC_XCYCLE_MAX_NUM_OF_MEASUREMENTS |
| * |
| * @brief Max number of measurement allowed. This constant is used when |
| * creating storage array for Xcycle. When run in continuous mode, |
| * Xcycle will wrap around and re-use buffer. |
| */ |
| #define IX_PERFPROF_ACC_XCYCLE_MAX_NUM_OF_MEASUREMENTS 600 |
| |
| #ifdef __linux |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @def IX_PERFPROF_ACC_XSCALE_PMU_SYMBOL_ACCURACY |
| * |
| * @brief Level of accuracy required for matching the PC Address to |
| * symbol address. This is used when the XScale PMU time/event |
| * sampling functions get the PC address and search for the |
| * corresponding symbol address. |
| */ |
| #define IX_PERFPROF_ACC_XSCALE_PMU_SYMBOL_ACCURACY 0xffff |
| |
| #endif /*__linux*/ |
| |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @def IX_PERFPROF_ACC_LOG |
| * |
| * @brief Mechanism for logging a formatted message for the PerfProfAcc component |
| * |
| * @param level UINT32 [in] - trace level |
| * @param device UINT32 [in] - output device |
| * @param str char* [in] - format string, similar to printf(). |
| * @param a UINT32 [in] - first argument to display |
| * @param b UINT32 [in] - second argument to display |
| * @param c UINT32 [in] - third argument to display |
| * @param d UINT32 [in] - fourth argument to display |
| * @param e UINT32 [in] - fifth argument to display |
| * @param f UINT32 [in] - sixth argument to display |
| * |
| * @return none |
| */ |
| #ifndef NDEBUG |
| #define IX_PERFPROF_ACC_LOG(level, device, str, a, b, c, d, e, f)\ |
| (ixOsalLog (level, device, str, a, b, c, d, e, f)) |
| #else /*do nothing*/ |
| #define IX_PERFPROF_ACC_LOG(level, device, str, a, b, c, d, e, f) |
| #endif /*ifdef NDEBUG */ |
| |
| /* |
| * Section for struct |
| */ |
| |
| /** |
| * @brief contains summary of samples taken |
| * |
| * Structure contains all details of each program counter value - frequency |
| * that PC occurs |
| */ |
| typedef struct |
| { |
| UINT32 programCounter; /**<the program counter value of the sample*/ |
| UINT32 freq; /**<the frequency of the occurence of the sample*/ |
| } IxPerfProfAccXscalePmuSamplePcProfile; |
| |
| /** |
| * @brief contains results of a counter |
| * |
| * Structure contains the results of a counter, which are split into the lower |
| * and upper 32 bits of the final count |
| */ |
| typedef struct |
| { |
| UINT32 lower32BitsEventCount; /**<lower 32bits value of the event counter*/ |
| UINT32 upper32BitsEventCount; /**<upper 32bits value of the event counter*/ |
| } IxPerfProfAccXscalePmuEvtCnt; |
| |
| /** |
| * @brief contains results of counters and their overflow |
| * |
| * Structure contains all values of counters and associated overflows. The |
| * specific event and clock counters are determined by the user |
| */ |
| typedef struct |
| { |
| UINT32 clk_value; /**<current value of clock counter*/ |
| UINT32 clk_samples; /**<number of clock counter overflows*/ |
| UINT32 event1_value; /**<current value of event 1 counter*/ |
| UINT32 event1_samples; /**<number of event 1 counter overflows*/ |
| UINT32 event2_value; /**<current value of event 2 counter*/ |
| UINT32 event2_samples; /**<number of event 2 counter overflows*/ |
| UINT32 event3_value; /**<current value of event 3 counter*/ |
| UINT32 event3_samples; /**<number of event 3 counter overflows*/ |
| UINT32 event4_value; /**<current value of event 4 counter*/ |
| UINT32 event4_samples; /**<number of event 4 counter overflows*/ |
| } IxPerfProfAccXscalePmuResults; |
| |
| /** |
| * |
| * @brief Results obtained from Xcycle run |
| */ |
| typedef struct |
| { |
| float maxIdlePercentage; /**<maximum percentage of Idle cycles*/ |
| float minIdlePercentage; /**<minimum percentage of Idle cycles*/ |
| float aveIdlePercentage; /**<average percentage of Idle cycles*/ |
| UINT32 totalMeasurements; /**<total number of measurement made */ |
| } IxPerfProfAccXcycleResults; |
| |
| /** |
| * |
| * @brief Results obtained from running the Bus Pmu component. The results |
| * are obtained when the get functions is called. |
| * |
| */ |
| typedef struct |
| { |
| UINT32 statsToGetLower27Bit[IX_PERFPROF_ACC_BUS_PMU_MAX_PECS]; /**<Lower 27 Bit of counter value */ |
| UINT32 statsToGetUpper32Bit[IX_PERFPROF_ACC_BUS_PMU_MAX_PECS]; /**<Upper 32 Bit of counter value */ |
| } IxPerfProfAccBusPmuResults; |
| |
| /* |
| * Section for enum |
| */ |
| |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @enum IxPerfProfAccBusPmuEventCounters1 |
| * |
| * @brief Type of bus pmu events supported on PEC 1. |
| * |
| * Lists all bus pmu events. |
| */ |
| typedef enum |
| { |
| IX_PERFPROF_ACC_BUS_PMU_PEC1_NORTH_NPEA_GRANT_SELECT = 1, /**< Select North NPEA grant on PEC1*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC1_NORTH_NPEB_GRANT_SELECT, /**< Select North NPEB grant on PEC1*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC1_NORTH_NPEC_GRANT_SELECT, /**< Select North NPEC grant on PEC1*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC1_NORTH_BUS_IDLE_SELECT, /**< Select North bus idle on PEC1*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC1_NORTH_NPEA_REQ_SELECT, /**< Select North NPEA req on PEC1*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC1_NORTH_NPEB_REQ_SELECT, /**< Select North NPEB req on PEC1*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC1_NORTH_NPEC_REQ_SELECT, /**< Select North NPEC req on PEC1*/ |
| |
| IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_GSKT_GRANT_SELECT, /**< Select south gasket grant on PEC1*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_ABB_GRANT_SELECT, /**< Select south abb grant on PEC1*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_PCI_GRANT_SELECT, /**< Select south pci grant on PEC1*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_APB_GRANT_SELECT, /**< Select south apb grant on PEC1*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_GSKT_REQ_SELECT, /**< Select south gasket request on PEC1*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_ABB_REQ_SELECT, /**< Select south abb request on PEC1*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_PCI_REQ_SELECT, /**< Select south pci request on PEC1*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC1_SOUTH_APB_REQ_SELECT, /**< Select south apb request on PEC1*/ |
| |
| IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_0_HIT_SELECT, /**< Select sdram0 hit on PEC1*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_1_HIT_SELECT, /**< Select sdram1 hit on PEC1*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_2_HIT_SELECT, /**< Select sdram2 hit on PEC1*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_3_HIT_SELECT, /**< Select sdram3 hit on PEC1*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_4_MISS_SELECT, /**< Select sdram4 miss on PEC1*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_5_MISS_SELECT, /**< Select sdram5 miss on PEC1*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_6_MISS_SELECT, /**< Select sdram6 miss on PEC1*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC1_SDR_7_MISS_SELECT /**< Select sdram7 miss on PEC1*/ |
| } IxPerfProfAccBusPmuEventCounters1; |
| |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @enum IxPerfProfAccBusPmuEventCounters2 |
| * |
| * @brief Type of bus pmu events supported on PEC 2. |
| * |
| * Lists all bus pmu events. |
| */ |
| typedef enum |
| { |
| IX_PERFPROF_ACC_BUS_PMU_PEC2_NORTH_NPEA_XFER_SELECT = 24, /**< Select North NPEA transfer on PEC2*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC2_NORTH_NPEB_XFER_SELECT, /**< Select North NPEB transfer on PEC2*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC2_NORTH_NPEC_XFER_SELECT, /**< Select North NPEC transfer on PEC2*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC2_NORTH_BUS_WRITE_SELECT, /**< Select North bus write on PEC2*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC2_NORTH_NPEA_OWN_SELECT, /**< Select North NPEA own on PEC2*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC2_NORTH_NPEB_OWN_SELECT, /**< Select North NPEB own on PEC2*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC2_NORTH_NPEC_OWN_SELECT, /**< Select North NPEC own on PEC2*/ |
| |
| IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_GSKT_XFER_SELECT, /**< Select South gasket transfer on PEC2*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_ABB_XFER_SELECT, /**< Select South abb transfer on PEC2*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_PCI_XFER_SELECT, /**< Select South pci transfer on PEC2*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_APB_XFER_SELECT, /**< Select South apb transfer on PEC2*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_GSKT_OWN_SELECT, /**< Select South gasket own on PEC2*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_ABB_OWN_SELECT, /**< Select South abb own on PEC2*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_PCI_OWN_SELECT, /**< Select South pci own on PEC2*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC2_SOUTH_APB_OWN_SELECT, /**< Select South apb own transfer on PEC2*/ |
| |
| IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_1_HIT_SELECT, /**< Select sdram1 hit on PEC2*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_2_HIT_SELECT, /**< Select sdram2 hit on PEC2*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_3_HIT_SELECT, /**< Select sdram3 hit on PEC2*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_4_HIT_SELECT, /**< Select sdram4 hit on PEC2*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_5_MISS_SELECT, /**< Select sdram5 miss on PEC2*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_6_MISS_SELECT, /**< Select sdram6 miss on PEC2*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_7_MISS_SELECT, /**< Select sdram7 miss on PEC2*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC2_SDR_0_MISS_SELECT /**< Select sdram0 miss on PEC2*/ |
| } IxPerfProfAccBusPmuEventCounters2; |
| |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @enum IxPerfProfAccBusPmuEventCounters3 |
| * |
| * @brief Type of bus pmu events supported on PEC 3. |
| * |
| * Lists all bus pmu events. |
| */ |
| typedef enum |
| { |
| IX_PERFPROF_ACC_BUS_PMU_PEC3_NORTH_NPEA_RETRY_SELECT = 47, /**< Select north NPEA retry on PEC3*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC3_NORTH_NPEB_RETRY_SELECT, /**< Select north NPEB retry on PEC3*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC3_NORTH_NPEC_RETRY_SELECT, /**< Select north NPEC retry on PEC3*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC3_NORTH_BUS_READ_SELECT, /**< Select north bus read on PEC3*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC3_NORTH_NPEA_WRITE_SELECT, /**< Select north NPEA write on PEC3*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC3_NORTH_NPEB_WRITE_SELECT, /**< Select north NPEB write on PEC3*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC3_NORTH_NPEC_WRITE_SELECT, /**< Select north NPEC wirte on PEC3*/ |
| |
| IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_GSKT_RETRY_SELECT, /**< Select south gasket retry on PEC3*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_ABB_RETRY_SELECT, /**< Select south abb retry on PEC3*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_PCI_RETRY_SELECT, /**< Select south pci retry on PEC3*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_APB_RETRY_SELECT, /**< Select south apb retry on PEC3*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_GSKT_WRITE_SELECT, /**< Select south gasket write on PEC3*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_ABB_WRITE_SELECT, /**< Select south abb write on PEC3*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_PCI_WRITE_SELECT, /**< Select south pci write on PEC3*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC3_SOUTH_APB_WRITE_SELECT, /**< Select south apb write on PEC3*/ |
| |
| IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_2_HIT_SELECT, /**< Select sdram2 hit on PEC3*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_3_HIT_SELECT, /**< Select sdram3 hit on PEC3*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_4_HIT_SELECT, /**< Select sdram4 hit on PEC3*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_5_HIT_SELECT, /**< Select sdram5 hit on PEC3*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_6_MISS_SELECT, /**< Select sdram6 miss on PEC3*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_7_MISS_SELECT, /**< Select sdram7 miss on PEC3*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_0_MISS_SELECT, /**< Select sdram0 miss on PEC3*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC3_SDR_1_MISS_SELECT /**< Select sdram1 miss on PEC3*/ |
| } IxPerfProfAccBusPmuEventCounters3; |
| |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @enum IxPerfProfAccBusPmuEventCounters4 |
| * |
| * @brief Type of bus pmu events supported on PEC 4. |
| * |
| * Lists all bus pmu events. |
| */ |
| typedef enum |
| { |
| IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_PCI_SPLIT_SELECT = 70, /**< Select south pci split on PEC4*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_EXP_SPLIT_SELECT, /**< Select south expansion split on PEC4*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_APB_GRANT_SELECT, /**< Select south apb grant on PEC4*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_APB_XFER_SELECT, /**< Select south apb transfer on PEC4*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_GSKT_READ_SELECT, /**< Select south gasket read on PEC4*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_ABB_READ_SELECT, /**< Select south abb read on PEC4*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_PCI_READ_SELECT, /**< Select south pci read on PEC4*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC4_SOUTH_APB_READ_SELECT, /**< Select south apb read on PEC4*/ |
| |
| IX_PERFPROF_ACC_BUS_PMU_PEC4_NORTH_ABB_SPLIT_SELECT, /**< Select north abb split on PEC4*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC4_NORTH_NPEA_REQ_SELECT, /**< Select north NPEA req on PEC4*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC4_NORTH_NPEA_READ_SELECT, /**< Select north NPEA read on PEC4*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC4_NORTH_NPEB_READ_SELECT, /**< Select north NPEB read on PEC4*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC4_NORTH_NPEC_READ_SELECT, /**< Select north NPEC read on PEC4*/ |
| |
| IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_3_HIT_SELECT, /**< Select sdram3 hit on PEC4*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_4_HIT_SELECT, /**< Select sdram4 hit on PEC4*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_5_HIT_SELECT, /**< Select sdram5 hit on PEC4*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_6_HIT_SELECT, /**< Select sdram6 hit on PEC4*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_7_MISS_SELECT, /**< Select sdram7 miss on PEC4*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_0_MISS_SELECT, /**< Select sdram0 miss on PEC4*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_1_MISS_SELECT, /**< Select sdram1 miss on PEC4*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC4_SDR_2_MISS_SELECT /**< Select sdram2 miss on PEC4*/ |
| } IxPerfProfAccBusPmuEventCounters4; |
| |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @enum IxPerfProfAccBusPmuEventCounters5 |
| * |
| * @brief Type of bus pmu events supported on PEC 5. |
| * |
| * Lists all bus pmu events. |
| */ |
| typedef enum |
| { |
| IX_PERFPROF_ACC_BUS_PMU_PEC5_SOUTH_ABB_GRANT_SELECT = 91, /**< Select south abb grant on PEC5*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC5_SOUTH_ABB_XFER_SELECT, /**< Select south abb transfer on PEC5*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC5_SOUTH_ABB_RETRY_SELECT, /**< Select south abb retry on PEC5*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC5_SOUTH_EXP_SPLIT_SELECT, /**< Select south expansion split on PEC5*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC5_SOUTH_ABB_REQ_SELECT, /**< Select south abb request on PEC5*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC5_SOUTH_ABB_OWN_SELECT, /**< Select south abb own on PEC5*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC5_SOUTH_BUS_IDLE_SELECT, /**< Select south bus idle on PEC5*/ |
| |
| IX_PERFPROF_ACC_BUS_PMU_PEC5_NORTH_NPEB_GRANT_SELECT, /**< Select north NPEB grant on PEC5*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC5_NORTH_NPEB_XFER_SELECT, /**< Select north NPEB transfer on PEC5*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC5_NORTH_NPEB_RETRY_SELECT, /**< Select north NPEB retry on PEC5*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC5_NORTH_NPEB_REQ_SELECT, /**< Select north NPEB request on PEC5*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC5_NORTH_NPEB_OWN_SELECT, /**< Select north NPEB own on PEC5*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC5_NORTH_NPEB_WRITE_SELECT, /**< Select north NPEB write on PEC5*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC5_NORTH_NPEB_READ_SELECT, /**< Select north NPEB read on PEC5*/ |
| |
| IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_4_HIT_SELECT, /**< Select north sdram4 hit on PEC5*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_5_HIT_SELECT, /**< Select north sdram5 hit on PEC5*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_6_HIT_SELECT, /**< Select north sdram6 hit on PEC5*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_7_HIT_SELECT, /**< Select north sdram7 hit on PEC5*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_0_MISS_SELECT, /**< Select north sdram0 miss on PEC5*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_1_MISS_SELECT, /**< Select north sdram1 miss on PEC5*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_2_MISS_SELECT, /**< Select north sdram2 miss on PEC5*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC5_SDR_3_MISS_SELECT /**< Select north sdram3 miss on PEC5*/ |
| } IxPerfProfAccBusPmuEventCounters5; |
| |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @enum IxPerfProfAccBusPmuEventCounters6 |
| * |
| * @brief Type of bus pmu events supported on PEC 6. |
| * |
| * Lists all bus pmu events. |
| */ |
| typedef enum |
| { |
| IX_PERFPROF_ACC_BUS_PMU_PEC6_SOUTH_PCI_GRANT_SELECT = 113, /**< Select south pci grant on PEC6*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC6_SOUTH_PCI_XFER_SELECT, /**< Select south pci transfer on PEC6*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC6_SOUTH_PCI_RETRY_SELECT, /**< Select south pci retry on PEC6*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC6_SOUTH_PCI_SPLIT_SELECT, /**< Select south pci split on PEC6*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC6_SOUTH_PCI_REQ_SELECT, /**< Select south pci request on PEC6*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC6_SOUTH_PCI_OWN_SELECT, /**< Select south pci own on PEC6*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC6_SOUTH_BUS_WRITE_SELECT, /**< Select south pci write on PEC6*/ |
| |
| IX_PERFPROF_ACC_BUS_PMU_PEC6_NORTH_NPEC_GRANT_SELECT, /**< Select north NPEC grant on PEC6*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC6_NORTH_NPEC_XFER_SELECT, /**< Select north NPEC transfer on PEC6*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC6_NORTH_NPEC_RETRY_SELECT, /**< Select north NPEC retry on PEC6*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC6_NORTH_NPEC_REQ_SELECT, /**< Select north NPEC request on PEC6*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC6_NORTH_NPEC_OWN_SELECT, /**< Select north NPEC own on PEC6*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC6_NORTH_NPEB_WRITE_SELECT, /**< Select north NPEB write on PEC6*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC6_NORTH_NPEC_READ_SELECT, /**< Select north NPEC read on PEC6*/ |
| |
| IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_5_HIT_SELECT, /**< Select sdram5 hit on PEC6*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_6_HIT_SELECT, /**< Select sdram6 hit on PEC6*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_7_HIT_SELECT, /**< Select sdram7 hit on PEC6*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_0_HIT_SELECT, /**< Select sdram0 hit on PEC6*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_1_MISS_SELECT, /**< Select sdram1 miss on PEC6*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_2_MISS_SELECT, /**< Select sdram2 miss on PEC6*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_3_MISS_SELECT, /**< Select sdram3 miss on PEC6*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC6_SDR_4_MISS_SELECT /**< Select sdram4 miss on PEC6*/ |
| } IxPerfProfAccBusPmuEventCounters6; |
| |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @enum IxPerfProfAccBusPmuEventCounters7 |
| * |
| * @brief Type of bus pmu events supported on PEC 7. |
| * |
| * Lists all bus pmu events. |
| */ |
| typedef enum |
| { |
| IX_PERFPROF_ACC_BUS_PMU_PEC7_SOUTH_APB_RETRY_SELECT = 135, /**< Select south apb retry on PEC7*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC7_SOUTH_APB_REQ_SELECT, /**< Select south apb request on PEC7*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC7_SOUTH_APB_OWN_SELECT, /**< Select south apb own on PEC7*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC7_SOUTH_BUS_READ_SELECT, /**< Select south bus read on PEC7*/ |
| IX_PERFPROF_ACC_BUS_PMU_PEC7_CYCLE_COUNT_SELECT /**< Select cycle count on PEC7*/ |
| } IxPerfProfAccBusPmuEventCounters7; |
| |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @enum IxPerfProfAccXscalePmuEvent |
| * |
| * @brief Type of xscale pmu events supported |
| * |
| * Lists all xscale pmu events. The maximum is a default value that the user |
| * should not exceed. |
| */ |
| typedef enum |
| { |
| IX_PERFPROF_ACC_XSCALE_PMU_EVENT_CACHE_MISS=0, /**< cache miss*/ |
| IX_PERFPROF_ACC_XSCALE_PMU_EVENT_CACHE_INSTRUCTION,/**< cache instruction*/ |
| IX_PERFPROF_ACC_XSCALE_PMU_EVENT_STALL, /**< event stall*/ |
| IX_PERFPROF_ACC_XSCALE_PMU_EVENT_INST_TLB_MISS, /**< instruction tlb miss*/ |
| IX_PERFPROF_ACC_XSCALE_PMU_EVENT_DATA_TLB_MISS, /**< data tlb miss*/ |
| IX_PERFPROF_ACC_XSCALE_PMU_EVENT_BRANCH_EXEC, /**< branch executed*/ |
| IX_PERFPROF_ACC_XSCALE_PMU_EVENT_BRANCH_MISPREDICT, /**<branch mispredict*/ |
| IX_PERFPROF_ACC_XSCALE_PMU_EVENT_INST_EXEC, /**< instruction executed*/ |
| IX_PERFPROF_ACC_XSCALE_PMU_EVENT_FULL_EVERYCYCLE, /**< |
| *Stall - data cache |
| *buffers are full. |
| *This event occurs |
| *every cycle where |
| *condition present |
| */ |
| IX_PERFPROF_ACC_XSCALE_PMU_EVENT_ONCE, /**< |
| *Stall - data cache buffers are |
| *full.This event occurs once |
| *for each contiguous sequence |
| */ |
| IX_PERFPROF_ACC_XSCALE_PMU_EVENT_DATA_CACHE_ACCESS, /**< data cache access*/ |
| IX_PERFPROF_ACC_XSCALE_PMU_EVENT_DATA_CACHE_MISS, /**< data cache miss*/ |
| IX_PERFPROF_ACC_XSCALE_PMU_EVENT_DATA_CACHE_WRITEBACK, /**<data cache |
| *writeback |
| */ |
| IX_PERFPROF_ACC_XSCALE_PMU_EVENT_SW_CHANGE_PC, /**< sw change pc*/ |
| IX_PERFPROF_ACC_XSCALE_PMU_EVENT_MAX /**< max value*/ |
| } IxPerfProfAccXscalePmuEvent; |
| |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @enum IxPerfProfAccStatus |
| * |
| * @brief Invalid Status Definitions |
| * |
| * These status will be used by the APIs to return to the user. |
| */ |
| typedef enum |
| { |
| IX_PERFPROF_ACC_STATUS_SUCCESS = IX_SUCCESS, /**< success*/ |
| IX_PERFPROF_ACC_STATUS_FAIL = IX_FAIL, /**< fail*/ |
| IX_PERFPROF_ACC_STATUS_ANOTHER_UTIL_IN_PROGRESS,/**<another utility in |
| *progress |
| */ |
| IX_PERFPROF_ACC_STATUS_XCYCLE_MEASUREMENT_IN_PROGRESS, /**<measurement in |
| *progress |
| */ |
| IX_PERFPROF_ACC_STATUS_XCYCLE_NO_BASELINE, /**<no baseline yet*/ |
| IX_PERFPROF_ACC_STATUS_XCYCLE_MEASUREMENT_REQUEST_OUT_OF_RANGE, /**< |
| * Measurement chosen |
| * is out of range |
| */ |
| IX_PERFPROF_ACC_STATUS_XCYCLE_PRIORITY_SET_FAIL, /**< |
| * Cannot set |
| * task priority |
| */ |
| IX_PERFPROF_ACC_STATUS_XCYCLE_THREAD_CREATE_FAIL, /**< |
| * Fail create thread |
| */ |
| IX_PERFPROF_ACC_STATUS_XCYCLE_PRIORITY_RESTORE_FAIL, /**< |
| *cannot restore |
| *priority |
| */ |
| IX_PERFPROF_ACC_STATUS_XCYCLE_MEASUREMENT_NOT_RUNNING, /**< xcycle not running*/ |
| IX_PERFPROF_ACC_STATUS_XSCALE_PMU_NUM_INVALID, /**< invalid number |
| *entered |
| */ |
| IX_PERFPROF_ACC_STATUS_XSCALE_PMU_EVENT_INVALID, /**< invalid pmu event*/ |
| IX_PERFPROF_ACC_STATUS_XSCALE_PMU_START_NOT_CALLED, /**<a start process |
| *was not called |
| *before attempting |
| *a stop or results |
| *get |
| */ |
| IX_PERFPROF_ACC_STATUS_BUS_PMU_MODE_ERROR, /**< invalid mode*/ |
| IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC1_ERROR, /**< invalid pec1 entered*/ |
| IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC2_ERROR, /**< invalid pec2 entered*/ |
| IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC3_ERROR, /**< invalid pec3 entered*/ |
| IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC4_ERROR, /**< invalid pec4 entered*/ |
| IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC5_ERROR, /**< invalid pec5 entered*/ |
| IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC6_ERROR, /**< invalid pec6 entered*/ |
| IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC7_ERROR, /**< invalid pec7 entered*/ |
| IX_PERFPROF_ACC_STATUS_BUS_PMU_START_NOT_CALLED, /**<a start process |
| *was not called |
| *before attempting |
| *a stop |
| */ |
| IX_PERFPROF_ACC_STATUS_COMPONENT_NOT_SUPPORTED /**<Device or OS does not support component*/ |
| } IxPerfProfAccStatus; |
| |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @enum IxPerfProfAccBusPmuMode |
| * |
| * @brief State selection of counters. |
| * |
| * These states will be used to determine the counters whose values are to be |
| * read. |
| */ |
| typedef enum |
| { |
| IX_PERFPROF_ACC_BUS_PMU_MODE_HALT=0, /**< halt state*/ |
| IX_PERFPROF_ACC_BUS_PMU_MODE_SOUTH, /**< south state*/ |
| IX_PERFPROF_ACC_BUS_PMU_MODE_NORTH, /**< north state*/ |
| IX_PERFPROF_ACC_BUS_PMU_MODE_SDRAM /**< SDRAM state*/ |
| } IxPerfProfAccBusPmuMode; |
| |
| /* |
| * Section for prototypes interface functions |
| */ |
| |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @fn ixPerfProfAccXscalePmuEventCountStart( |
| BOOL clkCntDiv, |
| UINT32 numEvents, |
| IxPerfProfAccXscalePmuEvent pmuEvent1, |
| IxPerfProfAccXscalePmuEvent pmuEvent2, |
| IxPerfProfAccXscalePmuEvent pmuEvent3, |
| IxPerfProfAccXscalePmuEvent pmuEvent4 ) |
| * |
| * @brief This API will start the clock and event counting |
| * |
| * @param clkCntDiv BOOL [in] - enables/disables the clock divider. When |
| * true, the divider is enabled and the clock count will be incremented |
| * by one at each 64th processor clock cycle. When false, the divider |
| * is disabled and the clock count will be incremented at every |
| * processor clock cycle. |
| * @param numEvents UINT32 [in] - the number of PMU events that are to be |
| * monitored as specified by the user. For clock counting only, this |
| * is set to zero. |
| * @param pmuEvent1 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU |
| * event to be monitored by counter 1 |
| * @param pmuEvent2 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU |
| * event to be monitored by counter 2 |
| * @param pmuEvent3 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU |
| * event to be monitored by counter 3 |
| * @param pmuEvent4 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU |
| * event to be monitored by counter 4 |
| * |
| * This API will start the clock and xscale PMU event counting. Up to |
| * 4 events can be monitored simultaneously. This API has to be called before |
| * ixPerfProfAccXscalePmuEventCountStop can be called. |
| * |
| * @return |
| * - IX_PERFPROF_ACC_STATUS_SUCCESS if clock and events counting are |
| * started successfully |
| * - IX_PERFPROF_ACC_STATUS_FAIL if unable to start the counting |
| * - IX_PERFPROF_ACC_STATUS_XSCALE_PMU_NUM_INVALID if the number of events |
| * specified is out of the valid range |
| * - IX_PERFPROF_ACC_STATUS_XSCALE_PMU_EVENT_INVALID if the value of the PMU |
| * event specified does not exist |
| * - IX_PERFPROF_ACC_STATUS_ANOTHER_UTIL_IN_PROGRESS - another utility is |
| * running |
| * |
| * @li Reentrant : no |
| * @li ISR Callable : no |
| * |
| */ |
| PUBLIC IxPerfProfAccStatus |
| ixPerfProfAccXscalePmuEventCountStart( |
| BOOL clkCntDiv, |
| UINT32 numEvents, |
| IxPerfProfAccXscalePmuEvent pmuEvent1, |
| IxPerfProfAccXscalePmuEvent pmuEvent2, |
| IxPerfProfAccXscalePmuEvent pmuEvent3, |
| IxPerfProfAccXscalePmuEvent pmuEvent4 ); |
| |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @fn ixPerfProfAccXscalePmuEventCountStop ( |
| IxPerfProfAccXscalePmuResults *eventCountStopResults) |
| * |
| * @brief This API will stop the clock and event counting |
| * |
| * @param *eventCountStopResults @ref IxPerfProfAccXscalePmuResults [out] - pointer |
| * to struct containing results of counters and their overflow. It is the |
| * users's responsibility to allocate the memory for this pointer. |
| * |
| * This API will stop the clock and xscale PMU events that are being counted. |
| * The results of the clock and events count will be stored in the pointer |
| * allocated by the user. It can only be called once |
| * IxPerfProfAccEventCountStart has been called. |
| * |
| * @return |
| * - IX_PERFPROF_ACC_STATUS_SUCCESS if clock and events counting are |
| * stopped successfully |
| * - IX_PERFPROF_ACC_STATUS_XSCALE_PMU_START_NOT_CALLED if |
| * ixPerfProfAccXscalePmuEventCountStart is not called first. |
| * |
| * @li Reentrant : no |
| * @li ISR Callable : no |
| * |
| */ |
| |
| PUBLIC IxPerfProfAccStatus |
| ixPerfProfAccXscalePmuEventCountStop( |
| IxPerfProfAccXscalePmuResults *eventCountStopResults); |
| |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @fn ixPerfProfAccXscalePmuTimeSampStart( |
| UINT32 samplingRate, |
| BOOL clkCntDiv) |
| * |
| * @brief Starts the time based sampling |
| * |
| * @param samplingRate UINT32 [in] - sampling rate is the number of |
| * clock counts before a counter overflow interrupt is generated, |
| * at which, a sample is taken; the rate specified cannot be greater |
| * than the counter size of 32bits or set to zero. |
| * @param clkCntDiv BOOL [in] - enables/disables the clock divider. When |
| * true, the divider is enabled and the clock count will be incremented |
| * by one at each 64th processor clock cycle. When false, the divider |
| * is disabled and the clock count will be incremented at every |
| * processor clock cycle. |
| * |
| * This API starts the time based sampling to determine the frequency with |
| * which lines of code are being executed. Sampling is done at the rate |
| * specified by the user. At each sample,the value of the program counter |
| * is determined. Each of these occurrences are recorded to determine the |
| * frequency with which the Xscale code is being executed. This API has to be |
| * called before ixPerfProfAccXscalePmuTimeSampStop can be called. |
| * |
| * @return |
| * - IX_PERFPROF_ACC_STATUS_SUCCESS if time based sampling is started |
| * successfully |
| * - IX_PERFPROF_ACC_STATUS_FAIL if unable to start the sampling |
| * - IX_PERFPROF_ACC_STATUS_ANOTHER_UTIL_IN_PROGRESS - another utility is |
| * running |
| * |
| * @li Reentrant : no |
| * @li ISR Callable : no |
| * |
| */ |
| PUBLIC IxPerfProfAccStatus |
| ixPerfProfAccXscalePmuTimeSampStart( |
| UINT32 samplingRate, |
| BOOL clkCntDiv); |
| |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @fn ixPerfProfAccXscalePmuTimeSampStop( |
| IxPerfProfAccXscalePmuEvtCnt *clkCount, |
| IxPerfProfAccXscalePmuSamplePcProfile *timeProfile) |
| * |
| * @brief Stops the time based sampling |
| * |
| * @param *clkCount @ref IxPerfProfAccXscalePmuEvtCnt [out] - pointer to the |
| * struct containing the final clock count and its overflow. It is the |
| * user's responsibility to allocate the memory for this pointer. |
| * @param *timeProfile @ref IxPerfProfAccXscalePmuSamplePcProfile [out] - |
| * pointer to the array of profiles for each program counter value; |
| * the user should set the size of the array to |
| * IX_PERFPROF_ACC_XSCALE_PMU_MAX_PROFILE_SAMPLES. It is the user's |
| * responsibility to allocate the memory for this pointer. |
| * |
| * This API stops the time based sampling. The results are stored in the |
| * pointers allocated by the user. It can only be called once |
| * ixPerfProfAccXscalePmuTimeSampStart has been called. |
| * |
| * @return |
| * - IX_PERFPROF_ACC_STATUS_SUCCESS if time based sampling is stopped |
| * successfully |
| * - IX_PERFPROF_ACC_STATUS_XSCALE_PMU_START_NOT_CALLED if |
| * ixPerfProfAccXscalePmuTimeSampStart not called first |
| * |
| * @li Reentrant : no |
| * @li ISR Callable : no |
| * |
| */ |
| PUBLIC IxPerfProfAccStatus |
| ixPerfProfAccXscalePmuTimeSampStop( |
| IxPerfProfAccXscalePmuEvtCnt *clkCount, |
| IxPerfProfAccXscalePmuSamplePcProfile *timeProfile); |
| |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @fn ixPerfProfAccXscalePmuEventSampStart( |
| UINT32 numEvents, |
| IxPerfProfAccXscalePmuEvent pmuEvent1, |
| UINT32 eventRate1, |
| IxPerfProfAccXscalePmuEvent pmuEvent2, |
| UINT32 eventRate2, |
| IxPerfProfAccXscalePmuEvent pmuEvent3, |
| UINT32 eventRate3, |
| IxPerfProfAccXscalePmuEvent pmuEvent4, |
| UINT32 eventRate4) |
| * |
| * @brief Starts the event based sampling |
| * |
| * @param numEvents UINT32 [in] - the number of PMU events that are |
| * to be monitored as specified by the user. The value should be |
| * between 1-4 events at a time. |
| * @param pmuEvent1 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU |
| * event to be monitored by counter 1 |
| * @param eventRate1 UINT32 [in] - sampling rate of counter 1. The rate is |
| * the number of events before a sample taken. If 0 is specified, the |
| * the full counter value (0xFFFFFFFF) is used. The rate must not be |
| * greater than the full counter value. |
| * @param pmuEvent2 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU |
| * event to be monitored by counter 2 |
| * @param eventRate2 UINT32 [in] - sampling rate of counter 2. The rate is |
| * the number of events before a sample taken. If 0 is specified, the |
| * full counter value (0xFFFFFFFF) is used. The rate must not be |
| * greater than the full counter value. |
| * @param pmuEvent3 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU |
| * event to be monitored by counter 3 |
| * @param eventRate3 UINT32 [in] - sampling rate of counter 3. The rate is |
| * the number of events before a sample taken. If 0 is specified, the |
| * full counter value (0xFFFFFFFF) is used. The rate must not be |
| * greater than the full counter value. |
| * @param pmuEvent4 @ref IxPerfProfAccXscalePmuEvent [in] - the specific PMU |
| * event to be monitored by counter 4 |
| * @param eventRate4 UINT32 [in] - sampling rate of counter 4. The rate is |
| * the number of events before a sample taken. If 0 is specified, the |
| * full counter value (0xFFFFFFFF) is used. The rate must not be |
| * greater than the full counter value. |
| * |
| * Starts the event based sampling to determine the frequency with |
| * which events are being executed. The sampling rate is the number of events, |
| * as specified by the user, before a counter overflow interrupt is |
| * generated. A sample is taken at each counter overflow interrupt. At each |
| * sample,the value of the program counter determines the corresponding |
| * location in the code. Each of these occurrences are recorded to determine |
| * the frequency with which the Xscale code in each event is executed. This API |
| * has to be called before ixPerfProfAccXscalePmuEventSampStop can be called. |
| * |
| * @return |
| * - IX_PERFPROF_ACC_STATUS_SUCCESS if event based sampling is started |
| * successfully |
| * - IX_PERFPROF_ACC_STATUS_FAIL if unable to start the sampling |
| * - IX_PERFPROF_ACC_STATUS_XSCALE_PMU_NUM_INVALID if the number of events |
| * specified is out of the valid range |
| * - IX_PERFPROF_ACC_STATUS_XSCALE_PMU_EVENT_INVALID if the value of the |
| * PMU event specified does not exist |
| * - IX_PERFPROF_ACC_STATUS_ANOTHER_UTIL_IN_PROGRESS - another utility is |
| * running |
| * |
| * @li Reentrant : no |
| * @li ISR Callable : no |
| * |
| */ |
| PUBLIC IxPerfProfAccStatus |
| ixPerfProfAccXscalePmuEventSampStart( |
| UINT32 numEvents, |
| IxPerfProfAccXscalePmuEvent pmuEvent1, |
| UINT32 eventRate1, |
| IxPerfProfAccXscalePmuEvent pmuEvent2, |
| UINT32 eventRate2, |
| IxPerfProfAccXscalePmuEvent pmuEvent3, |
| UINT32 eventRate3, |
| IxPerfProfAccXscalePmuEvent pmuEvent4, |
| UINT32 eventRate4); |
| |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @fn ixPerfProfAccXscalePmuEventSampStop( |
| IxPerfProfAccXscalePmuSamplePcProfile *eventProfile1, |
| IxPerfProfAccXscalePmuSamplePcProfile *eventProfile2, |
| IxPerfProfAccXscalePmuSamplePcProfile *eventProfile3, |
| IxPerfProfAccXscalePmuSamplePcProfile *eventProfile4) |
| * |
| * @brief Stops the event based sampling |
| * |
| * @param *eventProfile1 @ref IxPerfProfAccXscalePmuSamplePcProfile [out] - |
| * pointer to the array of profiles for each program counter value; |
| * the user should set the size of the array to |
| * IX_PERFPROF_ACC_XSCALE_PMU_MAX_PROFILE_SAMPLES. It is the |
| * users's responsibility to allocate memory for this pointer. |
| * @param *eventProfile2 @ref IxPerfProfAccXscalePmuSamplePcProfile [out] - |
| * pointer to the array of profiles for each program counter value; |
| * the user should set the size of the array to |
| * IX_PERFPROF_ACC_XSCALE_PMU_MAX_PROFILE_SAMPLES. It is the |
| * users's responsibility to allocate memory for this pointer. |
| * @param *eventProfile3 @ref IxPerfProfAccXscalePmuSamplePcProfile [out] - |
| * pointer to the array of profiles for each program counter value; |
| * the user should set the size of the array to |
| * IX_PERFPROF_ACC_XSCALE_PMU_MAX_PROFILE_SAMPLES. It is the |
| * users's responsibility to allocate memory for this pointer. |
| * @param *eventProfile4 @ref IxPerfProfAccXscalePmuSamplePcProfile [out] - |
| * pointer to the array of profiles for each program counter value; |
| * the user should set the size of the array to |
| * IX_PERFPROF_ACC_XSCALE_PMU_MAX_PROFILE_SAMPLES. It is the |
| * users's responsibility to allocate memory for this pointer. |
| * |
| * This API stops the event based sampling. The results are stored in the |
| * pointers allocated by the user. It can only be called once |
| * ixPerfProfAccEventSampStart has been called. |
| * |
| * @return |
| * - IX_PERFPROF_ACC_STATUS_SUCCESS if event based sampling is stopped |
| * successfully |
| * - IX_PERFPROF_ACC_STATUS_XSCALE_PMU_START_NOT_CALLED if |
| * ixPerfProfAccEventSampStart not called first. |
| * |
| * @li Reentrant : no |
| * @li ISR Callable : no |
| * |
| */ |
| PUBLIC IxPerfProfAccStatus |
| ixPerfProfAccXscalePmuEventSampStop( |
| IxPerfProfAccXscalePmuSamplePcProfile *eventProfile1, |
| IxPerfProfAccXscalePmuSamplePcProfile *eventProfile2, |
| IxPerfProfAccXscalePmuSamplePcProfile *eventProfile3, |
| IxPerfProfAccXscalePmuSamplePcProfile *eventProfile4); |
| |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @fn ixPerfProfAccXscalePmuResultsGet(IxPerfProfAccXscalePmuResults *results) |
| * |
| * @brief Reads the current value of the counters and their overflow |
| * |
| * @param *results @ref IxPerfProfAccXscalePmuResults [out] - pointer to the |
| results struct. It is the user's responsibility to allocate memory |
| for this pointer |
| * |
| * This API reads the value of all four event counters and the clock counter, |
| * and the associated overflows. It does not give results associated with |
| * sampling, i.e. PC and their frequencies. This API can be called at any time |
| * once a process has been started. If it is called before a process has started |
| * the user should be aware that the values it contains are default values and |
| * might be meaningless. The values of the counters are stored in the pointer |
| * allocated by the client. |
| * |
| * @return - none |
| * |
| * @li Reentrant : no |
| * @li ISR Callable : no |
| * |
| */ |
| PUBLIC void |
| ixPerfProfAccXscalePmuResultsGet(IxPerfProfAccXscalePmuResults *results); |
| |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @fn ixPerfProfAccBusPmuStart( |
| IxPerfProfAccBusPmuMode mode, |
| IxPerfProfAccBusPmuEventCounters1 pecEvent1, |
| IxPerfProfAccBusPmuEventCounters2 pecEvent2, |
| IxPerfProfAccBusPmuEventCounters3 pecEvent3, |
| IxPerfProfAccBusPmuEventCounters4 pecEvent4, |
| IxPerfProfAccBusPmuEventCounters5 pecEvent5, |
| IxPerfProfAccBusPmuEventCounters6 pecEvent6, |
| IxPerfProfAccBusPmuEventCounters7 pecEvent7) |
| * @brief Initializes all the counters and selects events to be monitored. |
| * |
| * Function initializes all the counters and assigns the events associated |
| * with the counters. Users send in the mode and events they want to count. |
| * This API verifies if the combination chosen is appropriate |
| * and sets all the registers accordingly. Selecting HALT mode will result |
| * in an error. User should use ixPerfProfAccBusPmuStop() to HALT. |
| * |
| * |
| * @param mode @ref IxPerfProfAccStateBusPmuMode [in] - Mode selection. |
| * @param pecEvent1 @ref IxPerfProfAccBusPmuEventCounters1 [in] - Event for PEC1. |
| * @param pecEvent2 @ref IxPerfProfAccBusPmuEventCounters2 [in] - Event for PEC2. |
| * @param pecEvent3 @ref IxPerfProfAccBusPmuEventCounters3 [in] - Event for PEC3. |
| * @param pecEvent4 @ref IxPerfProfAccBusPmuEventCounters4 [in] - Event for PEC4. |
| * @param pecEvent5 @ref IxPerfProfAccBusPmuEventCounters5 [in] - Event for PEC5. |
| * @param pecEvent6 @ref IxPerfProfAccBusPmuEventCounters6 [in] - Event for PEC6. |
| * @param pecEvent7 @ref IxPerfProfAccBusPmuEventCounters7 [in] - Event for PEC7. |
| * |
| * @return |
| * - IX_PERFPROF_ACC_STATUS_SUCCESS - Initialization executed |
| * successfully. |
| * - IX_PERFPROF_ACC_STATUS_BUS_PMU_MODE_ERROR - Error in selection of |
| * mode. Only NORTH, SOUTH and SDRAM modes are allowed. |
| * - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC1_ERROR - Error in selection of |
| * event for PEC1 |
| * - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC2_ERROR - Error in selection of |
| * event for PEC2 |
| * - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC3_ERROR - Error in selection of |
| * event for PEC3 |
| * - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC4_ERROR - Error in selection of |
| * event for PEC4 |
| * - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC5_ERROR - Error in selection of |
| * event for PEC5 |
| * - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC6_ERROR - Error in selection of |
| * event for PEC6 |
| * - IX_PERFPROF_ACC_STATUS_BUS_PMU_PEC7_ERROR - Error in selection of |
| * event for PEC7 |
| * - IX_PERFPROF_ACC_STATUS_ANOTHER_UTIL_IN_PROGRESS - another utility |
| * is running |
| * - IX_PERFPROF_ACC_STATUS_FAIL - Failed to start because interrupt |
| * service routine fails to bind. |
| * |
| * @li Reentrant : no |
| * @li ISR Callable : no |
| * |
| **/ |
| PUBLIC |
| IxPerfProfAccStatus ixPerfProfAccBusPmuStart ( |
| IxPerfProfAccBusPmuMode mode, |
| IxPerfProfAccBusPmuEventCounters1 pecEvent1, |
| IxPerfProfAccBusPmuEventCounters2 pecEvent2, |
| IxPerfProfAccBusPmuEventCounters3 pecEvent3, |
| IxPerfProfAccBusPmuEventCounters4 pecEvent4, |
| IxPerfProfAccBusPmuEventCounters5 pecEvent5, |
| IxPerfProfAccBusPmuEventCounters6 pecEvent6, |
| IxPerfProfAccBusPmuEventCounters7 pecEvent7); |
| |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @fn ixPerfProfAccBusPmuStop(void) |
| * @brief Stops all counters. |
| * |
| * This function stops all the PECs by setting the halt bit in the ESR. |
| * |
| * |
| * @return |
| * - IX_PERFPROF_ACC_STATUS_SUCCESS - Counters successfully halted. |
| * - IX_PERFPROF_ACC_STATUS_FAIL - Counters could'nt be halted. |
| * - IX_PERFPROF_ACC_STATUS_BUS_PMU_START_NOT_CALLED - the |
| * ixPerfProfAccBusPmuStart() function is not called. |
| * |
| * @li Reentrant : no |
| * @li ISR Callable : no |
| * |
| **/ |
| PUBLIC IxPerfProfAccStatus |
| ixPerfProfAccBusPmuStop (void); |
| |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @fn ixPerfProfAccBusPmuResultsGet ( |
| IxPerfProfAccBusPmuResults *busPmuResults) |
| * @brief Gets values of all counters |
| * |
| * This function is responsible for getting all the counter values from the |
| * lower API and putting it into an array for the user. |
| * |
| * @param *busPmuResults @ref IxPerfProfAccBusPmuResults [out] |
| * - Pointer to a structure of arrays to store all counter values. |
| * |
| * @return none |
| * |
| * @li Reentrant : no |
| * @li ISR Callable : no |
| * |
| **/ |
| PUBLIC void |
| ixPerfProfAccBusPmuResultsGet (IxPerfProfAccBusPmuResults *BusPmuResults); |
| |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @fn ixPerfProfAccBusPmuPMSRGet ( |
| UINT32 *pmsrValue) |
| * @brief Get values of PMSR |
| * |
| * This API gets the Previous Master Slave Register |
| * value and returns it to the calling function. This value indicates |
| * which master or slave accessed the north, south bus or sdram last. |
| * The value returned by this function is a 32 bit value and is read |
| * from location of an offset 0x0024 of the base value. |
| * |
| * The PMSR value returned indicate the following: |
| * <pre> |
| * |
| * ************************************************************************************* |
| * * Bit * Name * Description * |
| * * * |
| * ************************************************************************************* |
| * * [31:18] *Reserved* * |
| * ************************************************************************************* |
| * * [17:12] * PSS * Indicates which of the slaves on * |
| * * * * ARBS was previously * |
| * * * * accessed by the AHBS. * |
| * * * * [000001] Expansion Bus * |
| * * * * [000010] SDRAM Controller * |
| * * * * [000100] PCI * |
| * * * * [001000] Queue Manager * |
| * * * * [010000] AHB-APB Bridge * |
| * * * * [100000] Reserved * |
| * ************************************************************************************* |
| * * [11:8] * PSN * Indicates which of the Slaves on * |
| * * * * ARBN was previously * |
| * * * * accessed the AHBN. * |
| * * * * [0001] SDRAM Controller * |
| * * * * [0010] AHB-AHB Bridge * |
| * * * * [0100] Reserved * |
| * * * * [1000] Reserved * |
| * ************************************************************************************* |
| * * [7:4] * PMS * Indicates which of the Masters on * |
| * * * * ARBS was previously * |
| * * * * accessing the AHBS. * |
| * * * * [0001] Gasket * |
| * * * * [0010] AHB-AHB Bridge * |
| * * * * [0100] PCI * |
| * * * * [1000] APB * |
| * ************************************************************************************* |
| * * [3:0] * PMN * Indicates which of the Masters on * |
| * * * * ARBN was previously * |
| * * * * accessing the AHBN. * |
| * * * * [0001] NPEA * |
| * * * * [0010] NPEB * |
| * * * * [0100] NPEC * |
| * * * * [1000] Reserved * |
| * ************************************************************************************* |
| * </pre> |
| * |
| * @param *pmsrValue UINT32 [out] - Pointer to return PMSR value. Users need to |
| * allocate storage for psmrValue. |
| * |
| * @return none |
| * |
| * @li Reentrant : no |
| * @li ISR Callable : no |
| * |
| **/ |
| PUBLIC void |
| ixPerfProfAccBusPmuPMSRGet ( |
| UINT32 *pmsrValue); |
| |
| |
| /** |
| * The APIs below are specifically used for Xcycle module. |
| **/ |
| |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @fn ixPerfProfAccXcycleBaselineRun ( |
| UINT32 *numBaselineCycle) |
| * |
| * @brief Perform baseline for Xcycle |
| * |
| * @param *numBaselineCycle UINT32 [out] - pointer to baseline value after |
| * calibration. Calling function are responsible for |
| * allocating memory space for this pointer. |
| * |
| * Global Data : |
| * - None. |
| * |
| * This function MUST be run before the Xcycle tool can be used. This |
| * function must be run immediately when the OS boots up with no other |
| * addition programs running. |
| * Addition note : This API will measure the time needed to perform |
| * a fix amount of CPU instructions (~ 1 second worth of loops) as a |
| * highest priority task and with interrupt disabled. The time measured |
| * is known as the baseline - interpreted as the shortest time |
| * needed to complete the amount of CPU instructions. The baseline is |
| * returned as unit of time in 66Mhz clock tick. |
| * |
| * @return |
| * - IX_PERFPROF_ACC_STATUS_SUCCESS - successful run, result is returned |
| * - IX_PERFPROF_ACC_STATUS_XCYCLE_PRIORITY_SET_FAIL - failed to change |
| * task priority |
| * - IX_PERFPROF_ACC_STATUS_XCYCLE_PRIORITY_RESTORE_FAIL - failed to |
| * restore task priority |
| * - IX_PERFPROF_ACC_STATUS_ANOTHER_UTIL_IN_PROGRESS - another utility |
| * is running |
| * - IX_PERFPROF_ACC_STATUS_XCYCLE_MEASUREMENT_IN_PROGRESS - Xcycle |
| * tool has already started |
| * |
| * @li Reentrant : no |
| * @li ISR Callable : no |
| * |
| */ |
| PUBLIC IxPerfProfAccStatus |
| ixPerfProfAccXcycleBaselineRun( |
| UINT32 *numBaselineCycle); |
| |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @fn ixPerfProfAccXcycleStart( |
| UINT32 numMeasurementsRequested); |
| * |
| * @brief Start the measurement |
| * |
| * @param numMeasurementsRequested UINT32 [in] - number of measurements |
| * to perform. Value can be 0 to |
| * IX_PERFPROF_ACC_XCYCLE_MAX_NUM_OF_MEASUREMENTS. |
| * 0 indicate continuous measurement. |
| * |
| * Global Data : |
| * - None. |
| * |
| * |
| * Start the measurements immediately. |
| * numMeasurementsRequested specifies number of measurements to run. |
| * If numMeasurementsRequested is set to 0, the measurement will |
| * be performed continuously until IxPerfProfAccXcycleStop() |
| * is called. |
| * It is estimated that 1 measurement takes approximately 1 second during |
| * low CPU utilization, therefore 128 measurement takes approximately 128 sec. |
| * When CPU utilization is high, the measurement will take longer. |
| * This function spawn a task the perform the measurement and returns. |
| * The measurement may continue even if this function returns. |
| * |
| * IMPORTANT: Under heavy CPU utilization, the task spawn by this |
| * function may starve and fail to respond to stop command. User |
| * may need to kill the task manually in this case. |
| * |
| * There are only IX_PERFPROF_ACC_XCYCLE_MAX_NUM_OF_MEASUREMENTS |
| * storage available so storing is wrapped around if measurements are |
| * more than IX_PERFPROF_ACC_XCYCLE_MAX_NUM_OF_MEASUREMENTS. |
| * |
| * |
| * @return |
| * - IX_PERFPROF_ACC_STATUS_SUCCESS - successful start, a thread is created |
| * in the background to perform measurement. |
| * - IX_PERFPROF_ACC_STATUS_XCYCLE_PRIORITY_SET_FAIL - failed to set |
| * task priority |
| * - IX_PERFPROF_ACC_STATUS_XCYCLE_THREAD_CREATE_FAIL - failed to create |
| * thread to perform measurement. |
| * - IX_PERFPROF_ACC_STATUS_XCYCLE_NO_BASELINE - baseline is not available |
| * - IX_PERFPROF_ACC_STATUS_XCYCLE_MEASUREMENT_REQUEST_OUT_OF_RANGE - |
| * value is larger than IX_PERFPROF_ACC_XCYCLE_MAX_NUM_OF_MEASUREMENTS |
| * - IX_PERFPROF_ACC_STATUS_XCYCLE_MEASUREMENT_IN_PROGRESS - Xcycle tool |
| * has already started |
| * - IX_PERFPROF_ACC_STATUS_ANOTHER_UTIL_IN_PROGRESS - another utility is |
| * running |
| * |
| * @li Reentrant : no |
| * @li ISR Callable : no |
| * |
| */ |
| PUBLIC IxPerfProfAccStatus |
| ixPerfProfAccXcycleStart ( |
| UINT32 numMeasurementsRequested); |
| |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @fn ixPerfProfAccXcycleStop(void); |
| * |
| * @brief Stop the Xcycle measurement |
| * |
| * @param None |
| * |
| * Global Data : |
| * - None. |
| * |
| * Stop Xcycle measurements immediately. If the measurements have stopped |
| * or not started, return IX_PERFPROF_STATUS_XCYCLE_MEASUREMENT_NOT_RUNNING. |
| * Note: This function does not stop measurement cold. The measurement thread |
| * may need a few seconds to complete the last measurement. User needs to use |
| * ixPerfProfAccXcycleInProgress() to determine if measurement is indeed |
| * completed. |
| * |
| * @return |
| * - IX_PERFPROF_ACC_STATUS_SUCCESS - successful measurement is stopped |
| * - IX_PERFPROF_STATUS_XCYCLE_MEASUREMENT_NOT_RUNNING - no measurement running |
| * |
| * @li Reentrant : no |
| * @li ISR Callable : no |
| * |
| */ |
| PUBLIC IxPerfProfAccStatus |
| ixPerfProfAccXcycleStop(void); |
| |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @fn ixPerfProfAccXcycleResultsGet( |
| IxPerfProfAccXcycleResults *xcycleResult ) |
| * |
| * @brief Get the results of Xcycle measurement |
| * |
| * @param *xcycleResult @ref IxPerfProfAccXcycleResults [out] - Pointer to |
| * results of last measurements. Calling function are |
| * responsible for allocating memory space for this pointer. |
| * |
| * Global Data : |
| * - None. |
| * |
| * Retrieve the results of last measurement. User should use |
| * ixPerfProfAccXcycleInProgress() to check if measurement is completed |
| * before getting the results. |
| * |
| * @return |
| * - IX_PERFPROF_ACC_STATUS_SUCCESS - successful |
| * - IX_PERFPROF_ACC_STATUS_FAIL - result is not complete. |
| * - IX_PERFPROF_ACC_STATUS_XCYCLE_NO_BASELINE - baseline is performed |
| * - IX_PERFPROF_ACC_STATUS_XCYCLE_MEASUREMENT_IN_PROGRESS - Xcycle |
| * tool is still running |
| * |
| * @li Reentrant : no |
| * @li ISR Callable : no |
| * |
| */ |
| PUBLIC IxPerfProfAccStatus |
| ixPerfProfAccXcycleResultsGet ( |
| IxPerfProfAccXcycleResults *xcycleResult); |
| |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @fn ixPerfProfAccXcycleInProgress (void) |
| * |
| * @brief Check if Xcycle is running |
| * |
| * @param None |
| * Global Data : |
| * - None. |
| * |
| * Check if Xcycle measuring task is running. |
| * |
| * @return |
| * - true - Xcycle is running |
| * - false - Xcycle is not running |
| * |
| * @li Reentrant : no |
| * @li ISR Callable : no |
| * |
| */ |
| PUBLIC BOOL |
| ixPerfProfAccXcycleInProgress(void); |
| |
| #ifdef __linux |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @fn ixPerfProfAccXscalePmuTimeSampCreateProcFile |
| * |
| * @brief Enables proc file to call module function |
| * |
| * @param None |
| * |
| * Global Data : |
| * - None. |
| * |
| * This function is declared globally to enable /proc directory system to call |
| * and execute the function when the registered file is called. This function is not meant to |
| * be called by the user. |
| * |
| * @return |
| * - Length of data written to file. |
| * |
| * @li Reentrant : no |
| * @li ISR Callable : no |
| * |
| */ |
| int |
| ixPerfProfAccXscalePmuTimeSampCreateProcFile (char *buf, char **start, off_t offset, |
| int count, int *eof, void *data); |
| |
| /** |
| * @ingroup IxPerfProfAcc |
| * |
| * @fn ixPerfProfAccXscalePmuEventSampCreateProcFile |
| * |
| * @brief Enables proc file to call module function |
| * |
| * @param None |
| * |
| * Global Data : |
| * - None. |
| * |
| * This function is declared globally to enable /proc directory system to call |
| * and execute the function when the registered file is called. This function is not meant to |
| * be called by the user. |
| * |
| * @return |
| * - Length of data written to file. |
| * |
| * @li Reentrant : no |
| * @li ISR Callable : no |
| * |
| */ |
| int |
| ixPerfProfAccXscalePmuEventSampCreateProcFile (char *buf, char **start, off_t offset, |
| int count, int *eof, void *data); |
| |
| |
| #endif /* ifdef __linux */ |
| |
| #endif /* ndef IXPERFPROFACC_H */ |
| |
| /** |
| *@} defgroup IxPerfProfAcc |
| */ |
| |
| |