| /dts-v1/; |
| |
| #include "tegra20.dtsi" |
| |
| / { |
| model = "NVIDIA Seaboard"; |
| compatible = "nvidia,seaboard", "nvidia,tegra20"; |
| |
| chosen { |
| bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/mmcblk1p3 rw rootwait"; |
| }; |
| |
| chosen { |
| stdout-path = &uartd; |
| }; |
| |
| aliases { |
| /* This defines the order of our ports */ |
| usb0 = "/usb@c5008000"; |
| usb1 = "/usb@c5000000"; |
| i2c0 = "/i2c@7000d000"; |
| i2c1 = "/i2c@7000c000"; |
| i2c2 = "/i2c@7000c400"; |
| i2c3 = "/i2c@7000c500"; |
| sdhci0 = "/sdhci@c8000600"; |
| sdhci1 = "/sdhci@c8000400"; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = < 0x00000000 0x40000000 >; |
| }; |
| |
| host1x@50000000 { |
| status = "okay"; |
| dc@54200000 { |
| status = "okay"; |
| rgb { |
| status = "okay"; |
| nvidia,panel = <&lcd_panel>; |
| }; |
| }; |
| |
| dc@54240000 { |
| status = "disabled"; |
| }; |
| }; |
| |
| /* This is not used in U-Boot, but is expected to be in kernel .dts */ |
| i2c@7000d000 { |
| status = "okay"; |
| clock-frequency = <100000>; |
| pmic@34 { |
| compatible = "ti,tps6586x"; |
| reg = <0x34>; |
| |
| clk_32k: clock { |
| compatible = "fixed-clock"; |
| /* |
| * leave out for now due to CPP: |
| * #clock-cells = <0>; |
| */ |
| clock-frequency = <32768>; |
| }; |
| }; |
| }; |
| |
| serial@70006300 { |
| clock-frequency = < 216000000 >; |
| }; |
| |
| nand-controller@70008000 { |
| nvidia,wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>; |
| nvidia,width = <8>; |
| nvidia,timing = <26 100 20 80 20 10 12 10 70>; |
| nand@0 { |
| reg = <0>; |
| compatible = "hynix,hy27uf4g2b", "nand-flash"; |
| }; |
| }; |
| |
| i2c@7000c000 { |
| status = "okay"; |
| clock-frequency = <100000>; |
| }; |
| |
| i2c@7000c400 { |
| status = "okay"; |
| }; |
| |
| i2c@7000c500 { |
| status = "okay"; |
| clock-frequency = <100000>; |
| }; |
| |
| kbc@7000e200 { |
| status = "okay"; |
| linux,keymap = <0x00020011 0x0003001f 0x0004001e 0x0005002c |
| 0x000701d0 0x0107007d 0x02060064 0x02070038 0x03000006 |
| 0x03010005 0x03020013 0x03030012 0x03040021 0x03050020 |
| 0x0306002d 0x04000008 0x04010007 0x04020014 0x04030023 |
| 0x04040022 0x0405002f 0x0406002e 0x04070039 0x0500000a |
| 0x05010009 0x05020016 0x05030015 0x05040024 0x05050031 |
| 0x05060030 0x0507002b 0x0600000c 0x0601000b 0x06020018 |
| 0x06030017 0x06040026 0x06050025 0x06060033 0x06070032 |
| 0x0701000d 0x0702001b 0x0703001c 0x0707008b 0x08040036 |
| 0x0805002a 0x09050061 0x0907001d 0x0b00001a 0x0b010019 |
| 0x0b020028 0x0b030027 0x0b040035 0x0b050034 0x0c000044 |
| 0x0c010043 0x0c02000e 0x0c030004 0x0c040003 0x0c050067 |
| 0x0c0600d2 0x0c070077 0x0d00006e 0x0d01006f 0x0d030068 |
| 0x0d04006d 0x0d05006a 0x0d06006c 0x0d070069 0x0e000057 |
| 0x0e010058 0x0e020042 0x0e030010 0x0e04003e 0x0e05003d |
| 0x0e060002 0x0e070041 0x0f000001 0x0f010029 0x0f02003f |
| 0x0f03000f 0x0f04003b 0x0f05003c 0x0f06003a 0x0f070040 |
| 0x14000047 0x15000049 0x15010048 0x1502004b 0x1504004f |
| 0x16010062 0x1602004d 0x1603004c 0x16040051 0x16050050 |
| 0x16070052 0x1b010037 0x1b03004a 0x1b04004e 0x1b050053 |
| 0x1c050073 0x1d030066 0x1d04006b 0x1d0500e0 0x1d060072 |
| 0x1d0700e1 0x1e000045 0x1e010046 0x1e020071 |
| 0x1f04008a>; |
| linux,fn-keymap = <0x05040002>; |
| }; |
| |
| emc@7000f400 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| emc-table@190000 { |
| reg = < 190000 >; |
| compatible = "nvidia,tegra20-emc-table"; |
| clock-frequency = < 190000 >; |
| nvidia,emc-registers = < 0x0000000c 0x00000026 |
| 0x00000009 0x00000003 0x00000004 0x00000004 |
| 0x00000002 0x0000000c 0x00000003 0x00000003 |
| 0x00000002 0x00000001 0x00000004 0x00000005 |
| 0x00000004 0x00000009 0x0000000d 0x0000059f |
| 0x00000000 0x00000003 0x00000003 0x00000003 |
| 0x00000003 0x00000001 0x0000000b 0x000000c8 |
| 0x00000003 0x00000007 0x00000004 0x0000000f |
| 0x00000002 0x00000000 0x00000000 0x00000002 |
| 0x00000000 0x00000000 0x00000083 0xa06204ae |
| 0x007dc010 0x00000000 0x00000000 0x00000000 |
| 0x00000000 0x00000000 0x00000000 0x00000000 >; |
| }; |
| emc-table@380000 { |
| reg = < 380000 >; |
| compatible = "nvidia,tegra20-emc-table"; |
| clock-frequency = < 380000 >; |
| nvidia,emc-registers = < 0x00000017 0x0000004b |
| 0x00000012 0x00000006 0x00000004 0x00000005 |
| 0x00000003 0x0000000c 0x00000006 0x00000006 |
| 0x00000003 0x00000001 0x00000004 0x00000005 |
| 0x00000004 0x00000009 0x0000000d 0x00000b5f |
| 0x00000000 0x00000003 0x00000003 0x00000006 |
| 0x00000006 0x00000001 0x00000011 0x000000c8 |
| 0x00000003 0x0000000e 0x00000007 0x0000000f |
| 0x00000002 0x00000000 0x00000000 0x00000002 |
| 0x00000000 0x00000000 0x00000083 0xe044048b |
| 0x007d8010 0x00000000 0x00000000 0x00000000 |
| 0x00000000 0x00000000 0x00000000 0x00000000 >; |
| }; |
| }; |
| |
| usb@c5000000 { |
| status = "okay"; |
| nvidia,vbus-gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>; |
| dr_mode = "otg"; |
| }; |
| |
| usb@c5004000 { |
| status = "disabled"; |
| }; |
| |
| usb@c5008000 { |
| status = "okay"; |
| }; |
| |
| sdhci@c8000400 { |
| status = "okay"; |
| cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; |
| wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>; |
| power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>; |
| bus-width = <4>; |
| }; |
| |
| sdhci@c8000600 { |
| status = "okay"; |
| bus-width = <8>; |
| }; |
| |
| clocks { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| clk32k_in: clock@0 { |
| compatible = "fixed-clock"; |
| reg=<0>; |
| #clock-cells = <0>; |
| clock-frequency = <32768>; |
| }; |
| }; |
| |
| pwm: pwm@7000a000 { |
| status = "okay"; |
| }; |
| |
| lcd_panel: panel { |
| /* Seaboard has 1366x768 */ |
| clock = <70600000>; |
| xres = <1366>; |
| yres = <768>; |
| left-margin = <58>; |
| right-margin = <58>; |
| hsync-len = <58>; |
| lower-margin = <4>; |
| upper-margin = <4>; |
| vsync-len = <4>; |
| hsync-active-high; |
| nvidia,bits-per-pixel = <16>; |
| nvidia,pwm = <&pwm 2 0>; |
| nvidia,backlight-enable-gpios = <&gpio TEGRA_GPIO(D, 4) |
| GPIO_ACTIVE_HIGH>; |
| nvidia,lvds-shutdown-gpios = <&gpio TEGRA_GPIO(B, 2) |
| GPIO_ACTIVE_HIGH>; |
| nvidia,backlight-vdd-gpios = <&gpio TEGRA_GPIO(W, 0) |
| GPIO_ACTIVE_HIGH>; |
| nvidia,panel-vdd-gpios = <&gpio TEGRA_GPIO(C, 6) |
| GPIO_ACTIVE_HIGH>; |
| nvidia,panel-timings = <400 4 203 17 15>; |
| }; |
| }; |