blob: 3eca0237f3c0fd74463e619025a0cb1de8798fe1 [file] [log] [blame]
# The ga10h is an 10" tablet with an A33 or A23 soc, 1G RAM, 8G or 16G nand,
# sdio wifi, 2 micro usb ports, 1 otg and 1 host and 1 micro sd slot.
#
# This defconfig is for the v1.1 pcb with an a33 soc.
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ippo-q8h-v1.2-lcd1024x600"
CONFIG_USB_MUSB_SUNXI=y
CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
CONFIG_AXP_GPIO=y
CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:52000,le:138,ri:162,up:22,lo:10,hs:20,vs:3,sync:3,vmode:0"
CONFIG_VIDEO_LCD_PANEL_LVDS=y
CONFIG_VIDEO_LCD_DCLK_PHASE=0
CONFIG_VIDEO_LCD_POWER="PH7"
CONFIG_VIDEO_LCD_BL_EN="PH6"
CONFIG_VIDEO_LCD_BL_PWM="PH0"
#CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW=n
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_MACH_SUN8I_A33=y
CONFIG_DRAM_CLK=432
# zq = 0x3bbb
CONFIG_DRAM_ZQ=15291
CONFIG_DRAM_ODT_EN=y
# Wifi power
CONFIG_AXP221_DLDO1_VOLT=3300
# aldo1 is connected to VCC-IO, VCC-PD, VCC-USB and VCC-HP
CONFIG_AXP221_ALDO1_VOLT=3000