blob: 0639af8fe336ba0655b6551a7144e15f8e0b4bc2 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Qualcomm QCS404 based evaluation board device tree source
*
* (C) Copyright 2022 Sumit Garg <sumit.garg@linaro.org>
*/
/dts-v1/;
#include "skeleton64.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/pinctrl-snapdragon.h>
#include <dt-bindings/clock/qcom,gcc-qcs404.h>
/ {
model = "Qualcomm Technologies, Inc. QCS404 EVB";
compatible = "qcom,qcs404-evb", "qcom,qcs404";
#address-cells = <0x2>;
#size-cells = <0x2>;
chosen {
stdout-path = "serial0:115200n8";
};
aliases {
serial0 = &debug_uart;
};
memory {
device_type = "memory";
reg = <0 0x80000000 0 0x40000000>;
};
soc {
#address-cells = <0x1>;
#size-cells = <0x1>;
ranges = <0x0 0x0 0x0 0xffffffff>;
compatible = "simple-bus";
pinctrl_north@1300000 {
compatible = "qcom,qcs404-pinctrl";
reg = <0x1300000 0x200000>;
blsp1_uart2: uart {
pins = "GPIO_17", "GPIO_18";
function = "blsp_uart2";
};
};
gcc: clock-controller@1800000 {
compatible = "qcom,gcc-qcs404";
reg = <0x1800000 0x80000>;
#address-cells = <0x1>;
#size-cells = <0x0>;
#clock-cells = <1>;
};
reset: gcc-reset@1800000 {
compatible = "qcom,gcc-reset-qcs404";
reg = <0x1800000 0x80000>;
#reset-cells = <1>;
};
debug_uart: serial@78b1000 {
compatible = "qcom,msm-uartdm-v1.4";
reg = <0x78b1000 0x200>;
clock = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
bit-rate = <0xFF>;
pinctrl-names = "uart";
pinctrl-0 = <&blsp1_uart2>;
};
sdhci@7804000 {
compatible = "qcom,sdhci-msm-v5";
reg = <0x7804000 0x1000 0x7805000 0x1000>;
clock = <&gcc GCC_SDCC1_APPS_CLK>,
<&gcc GCC_SDCC1_AHB_CLK>;
bus-width = <0x8>;
index = <0x0>;
non-removable;
mmc-ddr-1_8v;
mmc-hs400-1_8v;
};
usb3_phy: phy@78000 {
compatible = "qcom,usb-ss-28nm-phy";
#phy-cells = <0>;
reg = <0x78000 0x400>;
clocks = <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
<&gcc GCC_USB3_PHY_PIPE_CLK>;
clock-names = "ahb", "pipe";
resets = <&reset GCC_USB3_PHY_BCR>,
<&reset GCC_USB3PHY_PHY_BCR>;
reset-names = "com", "phy";
};
usb2_phy_prim: phy@7a000 {
compatible = "qcom,usb-hs-28nm-femtophy";
#phy-cells = <0>;
reg = <0x7a000 0x200>;
clocks = <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
<&gcc GCC_USB2A_PHY_SLEEP_CLK>;
clock-names = "ahb", "sleep";
resets = <&reset GCC_USB_HS_PHY_CFG_AHB_BCR>,
<&reset GCC_USB2A_PHY_BCR>;
reset-names = "phy", "por";
};
usb2_phy_sec: phy@7c000 {
compatible = "qcom,usb-hs-28nm-femtophy";
#phy-cells = <0>;
reg = <0x7c000 0x200>;
clocks = <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
<&gcc GCC_USB2A_PHY_SLEEP_CLK>;
clock-names = "ahb", "sleep";
resets = <&reset GCC_QUSB2_PHY_BCR>,
<&reset GCC_USB2_HS_PHY_ONLY_BCR>;
reset-names = "phy", "por";
};
usb3: usb@7678800 {
compatible = "qcom,dwc3";
reg = <0x7678800 0x400>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
clocks = <&gcc GCC_USB30_MASTER_CLK>,
<&gcc GCC_SYS_NOC_USB3_CLK>,
<&gcc GCC_USB30_SLEEP_CLK>,
<&gcc GCC_USB30_MOCK_UTMI_CLK>;
clock-names = "core", "iface", "sleep", "mock_utmi";
dwc3@7580000 {
compatible = "snps,dwc3";
reg = <0x7580000 0xcd00>;
phys = <&usb2_phy_prim>, <&usb3_phy>;
phy-names = "usb2-phy", "usb3-phy";
dr_mode = "host";
snps,has-lpm-erratum;
snps,hird-threshold = /bits/ 8 <0x10>;
snps,usb3_lpm_capable;
maximum-speed = "super-speed";
};
};
usb2: usb@79b8800 {
compatible = "qcom,dwc3";
reg = <0x79b8800 0x400>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>,
<&gcc GCC_PCNOC_USB2_CLK>,
<&gcc GCC_USB_HS_INACTIVITY_TIMERS_CLK>,
<&gcc GCC_USB20_MOCK_UTMI_CLK>;
clock-names = "core", "iface", "sleep", "mock_utmi";
dwc3@78c0000 {
compatible = "snps,dwc3";
reg = <0x78c0000 0xcc00>;
phys = <&usb2_phy_sec>;
phy-names = "usb2-phy";
dr_mode = "peripheral";
snps,has-lpm-erratum;
snps,hird-threshold = /bits/ 8 <0x10>;
snps,usb3_lpm_capable;
maximum-speed = "high-speed";
};
};
spmi@200f000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0x200f000 0x1000
0x2400000 0x400000
0x2c00000 0x400000>;
#address-cells = <0x1>;
#size-cells = <0x1>;
pms405_0: pms405@0 {
compatible = "qcom,spmi-pmic";
reg = <0x0 0x1>;
#address-cells = <0x1>;
#size-cells = <0x1>;
pms405_gpios: pms405_gpios@c000 {
compatible = "qcom,pms405-gpio";
reg = <0xc000 0x400>;
gpio-controller;
gpio-count = <12>;
#gpio-cells = <2>;
gpio-bank-name="pmic";
};
};
};
};
};
#include "qcs404-evb-uboot.dtsi"