drivers/gpio/omap_gpio.c - platform/external/u-boot - Gitiles

 // SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (c) 2009 Wind River Systems, Inc.
  * Tom Rix <Tom.Rix@windriver.com>
  *
  * This work is derived from the linux 2.6.27 kernel source
  * To fetch, use the kernel repository
  * git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
  * Use the v2.6.27 tag.
  *
  * Below is the original's header including its copyright
  *
  *  linux/arch/arm/plat-omap/gpio.c
  *
  * Support functions for OMAP GPIO
  *
  * Copyright (C) 2003-2005 Nokia Corporation
  * Written by Juha Yrjölä <juha.yrjola@nokia.com>
  */
 #include <common.h>
 #include <dm.h>
 #include <fdtdec.h>
 #include <asm/gpio.h>
 #include <asm/io.h>
 #include <linux/errno.h>
 #include <malloc.h>

 DECLARE_GLOBAL_DATA_PTR;

 #define OMAP_GPIO_DIR_OUT	0
 #define OMAP_GPIO_DIR_IN	1

 #ifdef CONFIG_DM_GPIO

 #define GPIO_PER_BANK			32

 struct gpio_bank {
 	/* TODO(sjg@chromium.org): Can we use a struct here? */
 	void *base;	/* address of registers in physical memory */
 };

 #endif

 static inline int get_gpio_index(int gpio)
 {
 	return gpio & 0x1f;
 }

 int gpio_is_valid(int gpio)
 {
 	return (gpio >= 0) && (gpio < OMAP_MAX_GPIO);
 }

 static void _set_gpio_direction(const struct gpio_bank *bank, int gpio,
 				int is_input)
 {
 	void *reg = bank->base;
 	u32 l;

 	reg += OMAP_GPIO_OE;

 	l = __raw_readl(reg);
 	if (is_input)
 		l |= 1 << gpio;
 	else
 		l &= ~(1 << gpio);
 	__raw_writel(l, reg);
 }

 /**
  * Get the direction of the GPIO by reading the GPIO_OE register
  * corresponding to the specified bank.
  */
 static int _get_gpio_direction(const struct gpio_bank *bank, int gpio)
 {
 	void *reg = bank->base;
 	u32 v;

 	reg += OMAP_GPIO_OE;

 	v = __raw_readl(reg);

 	if (v & (1 << gpio))
 		return OMAP_GPIO_DIR_IN;
 	else
 		return OMAP_GPIO_DIR_OUT;
 }

 static void _set_gpio_dataout(const struct gpio_bank *bank, int gpio,
 				int enable)
 {
 	void *reg = bank->base;
 	u32 l = 0;

 	if (enable)
 		reg += OMAP_GPIO_SETDATAOUT;
 	else
 		reg += OMAP_GPIO_CLEARDATAOUT;

 	l = 1 << gpio;
 	__raw_writel(l, reg);
 }

 static int _get_gpio_value(const struct gpio_bank *bank, int gpio)
 {
 	void *reg = bank->base;
 	int input;

 	input = _get_gpio_direction(bank, gpio);
 	switch (input) {
 	case OMAP_GPIO_DIR_IN:
 		reg += OMAP_GPIO_DATAIN;
 		break;
 	case OMAP_GPIO_DIR_OUT:
 		reg += OMAP_GPIO_DATAOUT;
 		break;
 	default:
 		return -1;
 	}

 	return (__raw_readl(reg) & (1 << gpio)) != 0;
 }

 #ifndef CONFIG_DM_GPIO

 static inline const struct gpio_bank *get_gpio_bank(int gpio)
 {
 	return &omap_gpio_bank[gpio >> 5];
 }

 static int check_gpio(int gpio)
 {
 	if (!gpio_is_valid(gpio)) {
 		printf("ERROR : check_gpio: invalid GPIO %d\n", gpio);
 		return -1;
 	}
 	return 0;
 }

 /**
  * Set value of the specified gpio
  */
 int gpio_set_value(unsigned gpio, int value)
 {
 	const struct gpio_bank *bank;

 	if (check_gpio(gpio) < 0)
 		return -1;
 	bank = get_gpio_bank(gpio);
 	_set_gpio_dataout(bank, get_gpio_index(gpio), value);

 	return 0;
 }

 /**
  * Get value of the specified gpio
  */
 int gpio_get_value(unsigned gpio)
 {
 	const struct gpio_bank *bank;

 	if (check_gpio(gpio) < 0)
 		return -1;
 	bank = get_gpio_bank(gpio);

 	return _get_gpio_value(bank, get_gpio_index(gpio));
 }

 /**
  * Set gpio direction as input
  */
 int gpio_direction_input(unsigned gpio)
 {
 	const struct gpio_bank *bank;

 	if (check_gpio(gpio) < 0)
 		return -1;

 	bank = get_gpio_bank(gpio);
 	_set_gpio_direction(bank, get_gpio_index(gpio), 1);

 	return 0;
 }

 /**
  * Set gpio direction as output
  */
 int gpio_direction_output(unsigned gpio, int value)
 {
 	const struct gpio_bank *bank;

 	if (check_gpio(gpio) < 0)
 		return -1;

 	bank = get_gpio_bank(gpio);
 	_set_gpio_dataout(bank, get_gpio_index(gpio), value);
 	_set_gpio_direction(bank, get_gpio_index(gpio), 0);

 	return 0;
 }

 /**
  * Request a gpio before using it.
  *
  * NOTE: Argument 'label' is unused.
  */
 int gpio_request(unsigned gpio, const char *label)
 {
 	if (check_gpio(gpio) < 0)
 		return -1;

 	return 0;
 }

 /**
  * Reset and free the gpio after using it.
  */
 int gpio_free(unsigned gpio)
 {
 	return 0;
 }

 #else /* new driver model interface CONFIG_DM_GPIO */

 /* set GPIO pin 'gpio' as an input */
 static int omap_gpio_direction_input(struct udevice *dev, unsigned offset)
 {
 	struct gpio_bank *bank = dev_get_priv(dev);

 	/* Configure GPIO direction as input. */
 	_set_gpio_direction(bank, offset, 1);

 	return 0;
 }

 /* set GPIO pin 'gpio' as an output, with polarity 'value' */
 static int omap_gpio_direction_output(struct udevice *dev, unsigned offset,
 				       int value)
 {
 	struct gpio_bank *bank = dev_get_priv(dev);

 	_set_gpio_dataout(bank, offset, value);
 	_set_gpio_direction(bank, offset, 0);

 	return 0;
 }

 /* read GPIO IN value of pin 'gpio' */
 static int omap_gpio_get_value(struct udevice *dev, unsigned offset)
 {
 	struct gpio_bank *bank = dev_get_priv(dev);

 	return _get_gpio_value(bank, offset);
 }

 /* write GPIO OUT value to pin 'gpio' */
 static int omap_gpio_set_value(struct udevice *dev, unsigned offset,
 				 int value)
 {
 	struct gpio_bank *bank = dev_get_priv(dev);

 	_set_gpio_dataout(bank, offset, value);

 	return 0;
 }

 static int omap_gpio_get_function(struct udevice *dev, unsigned offset)
 {
 	struct gpio_bank *bank = dev_get_priv(dev);

 	/* GPIOF_FUNC is not implemented yet */
 	if (_get_gpio_direction(bank, offset) == OMAP_GPIO_DIR_OUT)
 		return GPIOF_OUTPUT;
 	else
 		return GPIOF_INPUT;
 }

 static const struct dm_gpio_ops gpio_omap_ops = {
 	.direction_input	= omap_gpio_direction_input,
 	.direction_output	= omap_gpio_direction_output,
 	.get_value		= omap_gpio_get_value,
 	.set_value		= omap_gpio_set_value,
 	.get_function		= omap_gpio_get_function,
 };

 static int omap_gpio_probe(struct udevice *dev)
 {
 	struct gpio_bank *bank = dev_get_priv(dev);
 	struct omap_gpio_platdata *plat = dev_get_platdata(dev);
 	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
 	int banknum;
 	char name[18], *str;

 	banknum = plat->bank_index;
 	sprintf(name, "GPIO%d_", banknum + 1);
 	str = strdup(name);
 	if (!str)
 		return -ENOMEM;
 	uc_priv->bank_name = str;
 	uc_priv->gpio_count = GPIO_PER_BANK;
 	bank->base = (void *)plat->base;
 	return 0;
 }

 static int omap_gpio_bind(struct udevice *dev)
 {
 	struct omap_gpio_platdata *plat = dev_get_platdata(dev);
 	fdt_addr_t base_addr;

 	if (plat)
 		return 0;

 	base_addr = devfdt_get_addr(dev);
 	if (base_addr == FDT_ADDR_T_NONE)
 		return -EINVAL;

 	/*
 	* TODO:
 	* When every board is converted to driver model and DT is
 	* supported, this can be done by auto-alloc feature, but
 	* not using calloc to alloc memory for platdata.
 	*
 	* For example am33xx_gpio uses platform data rather than device tree.
 	*
 	* NOTE: DO NOT COPY this code if you are using device tree.
 	*/
 	plat = calloc(1, sizeof(*plat));
 	if (!plat)
 		return -ENOMEM;

 	plat->base = base_addr;
 	plat->port_name = fdt_get_name(gd->fdt_blob, dev_of_offset(dev), NULL);
 	dev->platdata = plat;

 	return 0;
 }

 static const struct udevice_id omap_gpio_ids[] = {
 	{ .compatible = "ti,omap3-gpio" },
 	{ .compatible = "ti,omap4-gpio" },
 	{ .compatible = "ti,am4372-gpio" },
 	{ }
 };

 U_BOOT_DRIVER(gpio_omap) = {
 	.name	= "gpio_omap",
 	.id	= UCLASS_GPIO,
 	.ops	= &gpio_omap_ops,
 	.of_match = omap_gpio_ids,
 	.bind	= omap_gpio_bind,
 	.probe	= omap_gpio_probe,
 	.priv_auto_alloc_size = sizeof(struct gpio_bank),
 	.flags = DM_FLAG_PRE_RELOC,
 };

 #endif /* CONFIG_DM_GPIO */
	// SPDX-License-Identifier: GPL-2.0
	/*
	* Copyright (c) 2009 Wind River Systems, Inc.
	* Tom Rix <Tom.Rix@windriver.com>
	*
	* This work is derived from the linux 2.6.27 kernel source
	* To fetch, use the kernel repository
	* git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
	* Use the v2.6.27 tag.
	*
	* Below is the original's header including its copyright
	*
	* linux/arch/arm/plat-omap/gpio.c
	*
	* Support functions for OMAP GPIO
	*
	* Copyright (C) 2003-2005 Nokia Corporation
	* Written by Juha Yrjölä <juha.yrjola@nokia.com>
	*/
	#include <common.h>
	#include <dm.h>
	#include <fdtdec.h>
	#include <asm/gpio.h>
	#include <asm/io.h>
	#include <linux/errno.h>
	#include <malloc.h>

	DECLARE_GLOBAL_DATA_PTR;

	#define OMAP_GPIO_DIR_OUT 0
	#define OMAP_GPIO_DIR_IN 1

	#ifdef CONFIG_DM_GPIO

	#define GPIO_PER_BANK 32

	struct gpio_bank {
	/* TODO(sjg@chromium.org): Can we use a struct here? */
	void base; / address of registers in physical memory */
	};

	#endif

	static inline int get_gpio_index(int gpio)
	{
	return gpio & 0x1f;
	}

	int gpio_is_valid(int gpio)
	{
	return (gpio >= 0) && (gpio < OMAP_MAX_GPIO);
	}

	static void _set_gpio_direction(const struct gpio_bank *bank, int gpio,
	int is_input)
	{
	void *reg = bank->base;
	u32 l;

	reg += OMAP_GPIO_OE;

	l = __raw_readl(reg);
	if (is_input)
	l \|= 1 << gpio;
	else
	l &= ~(1 << gpio);
	__raw_writel(l, reg);
	}

	/**
	* Get the direction of the GPIO by reading the GPIO_OE register
	* corresponding to the specified bank.
	*/
	static int _get_gpio_direction(const struct gpio_bank *bank, int gpio)
	{
	void *reg = bank->base;
	u32 v;

	reg += OMAP_GPIO_OE;

	v = __raw_readl(reg);

	if (v & (1 << gpio))
	return OMAP_GPIO_DIR_IN;
	else
	return OMAP_GPIO_DIR_OUT;
	}

	static void _set_gpio_dataout(const struct gpio_bank *bank, int gpio,
	int enable)
	{
	void *reg = bank->base;
	u32 l = 0;

	if (enable)
	reg += OMAP_GPIO_SETDATAOUT;
	else
	reg += OMAP_GPIO_CLEARDATAOUT;

	l = 1 << gpio;
	__raw_writel(l, reg);
	}

	static int _get_gpio_value(const struct gpio_bank *bank, int gpio)
	{
	void *reg = bank->base;
	int input;

	input = _get_gpio_direction(bank, gpio);
	switch (input) {
	case OMAP_GPIO_DIR_IN:
	reg += OMAP_GPIO_DATAIN;
	break;
	case OMAP_GPIO_DIR_OUT:
	reg += OMAP_GPIO_DATAOUT;
	break;
	default:
	return -1;
	}

	return (__raw_readl(reg) & (1 << gpio)) != 0;
	}

	#ifndef CONFIG_DM_GPIO

	static inline const struct gpio_bank *get_gpio_bank(int gpio)
	{
	return &omap_gpio_bank[gpio >> 5];
	}

	static int check_gpio(int gpio)
	{
	if (!gpio_is_valid(gpio)) {
	printf("ERROR : check_gpio: invalid GPIO %d\n", gpio);
	return -1;
	}
	return 0;
	}

	/**
	* Set value of the specified gpio
	*/
	int gpio_set_value(unsigned gpio, int value)
	{
	const struct gpio_bank *bank;

	if (check_gpio(gpio) < 0)
	return -1;
	bank = get_gpio_bank(gpio);
	_set_gpio_dataout(bank, get_gpio_index(gpio), value);

	return 0;
	}

	/**
	* Get value of the specified gpio
	*/
	int gpio_get_value(unsigned gpio)
	{
	const struct gpio_bank *bank;

	if (check_gpio(gpio) < 0)
	return -1;
	bank = get_gpio_bank(gpio);

	return _get_gpio_value(bank, get_gpio_index(gpio));
	}

	/**
	* Set gpio direction as input
	*/
	int gpio_direction_input(unsigned gpio)
	{
	const struct gpio_bank *bank;

	if (check_gpio(gpio) < 0)
	return -1;

	bank = get_gpio_bank(gpio);
	_set_gpio_direction(bank, get_gpio_index(gpio), 1);

	return 0;
	}

	/**
	* Set gpio direction as output
	*/
	int gpio_direction_output(unsigned gpio, int value)
	{
	const struct gpio_bank *bank;

	if (check_gpio(gpio) < 0)
	return -1;

	bank = get_gpio_bank(gpio);
	_set_gpio_dataout(bank, get_gpio_index(gpio), value);
	_set_gpio_direction(bank, get_gpio_index(gpio), 0);

	return 0;
	}

	/**
	* Request a gpio before using it.
	*
	* NOTE: Argument 'label' is unused.
	*/
	int gpio_request(unsigned gpio, const char *label)
	{
	if (check_gpio(gpio) < 0)
	return -1;

	return 0;
	}

	/**
	* Reset and free the gpio after using it.
	*/
	int gpio_free(unsigned gpio)
	{
	return 0;
	}

	#else /* new driver model interface CONFIG_DM_GPIO */

	/* set GPIO pin 'gpio' as an input */
	static int omap_gpio_direction_input(struct udevice *dev, unsigned offset)
	{
	struct gpio_bank *bank = dev_get_priv(dev);

	/* Configure GPIO direction as input. */
	_set_gpio_direction(bank, offset, 1);

	return 0;
	}

	/* set GPIO pin 'gpio' as an output, with polarity 'value' */
	static int omap_gpio_direction_output(struct udevice *dev, unsigned offset,
	int value)
	{
	struct gpio_bank *bank = dev_get_priv(dev);

	_set_gpio_dataout(bank, offset, value);
	_set_gpio_direction(bank, offset, 0);

	return 0;
	}

	/* read GPIO IN value of pin 'gpio' */
	static int omap_gpio_get_value(struct udevice *dev, unsigned offset)
	{
	struct gpio_bank *bank = dev_get_priv(dev);

	return _get_gpio_value(bank, offset);
	}

	/* write GPIO OUT value to pin 'gpio' */
	static int omap_gpio_set_value(struct udevice *dev, unsigned offset,
	int value)
	{
	struct gpio_bank *bank = dev_get_priv(dev);

	_set_gpio_dataout(bank, offset, value);

	return 0;
	}

	static int omap_gpio_get_function(struct udevice *dev, unsigned offset)
	{
	struct gpio_bank *bank = dev_get_priv(dev);

	/* GPIOF_FUNC is not implemented yet */
	if (_get_gpio_direction(bank, offset) == OMAP_GPIO_DIR_OUT)
	return GPIOF_OUTPUT;
	else
	return GPIOF_INPUT;
	}

	static const struct dm_gpio_ops gpio_omap_ops = {
	.direction_input = omap_gpio_direction_input,
	.direction_output = omap_gpio_direction_output,
	.get_value = omap_gpio_get_value,
	.set_value = omap_gpio_set_value,
	.get_function = omap_gpio_get_function,
	};

	static int omap_gpio_probe(struct udevice *dev)
	{
	struct gpio_bank *bank = dev_get_priv(dev);
	struct omap_gpio_platdata *plat = dev_get_platdata(dev);
	struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
	int banknum;
	char name[18], *str;

	banknum = plat->bank_index;
	sprintf(name, "GPIO%d_", banknum + 1);
	str = strdup(name);
	if (!str)
	return -ENOMEM;
	uc_priv->bank_name = str;
	uc_priv->gpio_count = GPIO_PER_BANK;
	bank->base = (void *)plat->base;
	return 0;
	}

	static int omap_gpio_bind(struct udevice *dev)
	{
	struct omap_gpio_platdata *plat = dev_get_platdata(dev);
	fdt_addr_t base_addr;

	if (plat)
	return 0;

	base_addr = devfdt_get_addr(dev);
	if (base_addr == FDT_ADDR_T_NONE)
	return -EINVAL;

	/*
	* TODO:
	* When every board is converted to driver model and DT is
	* supported, this can be done by auto-alloc feature, but
	* not using calloc to alloc memory for platdata.
	*
	* For example am33xx_gpio uses platform data rather than device tree.
	*
	* NOTE: DO NOT COPY this code if you are using device tree.
	*/
	plat = calloc(1, sizeof(*plat));
	if (!plat)
	return -ENOMEM;

	plat->base = base_addr;
	plat->port_name = fdt_get_name(gd->fdt_blob, dev_of_offset(dev), NULL);
	dev->platdata = plat;

	return 0;
	}

	static const struct udevice_id omap_gpio_ids[] = {
	{ .compatible = "ti,omap3-gpio" },
	{ .compatible = "ti,omap4-gpio" },
	{ .compatible = "ti,am4372-gpio" },
	{ }
	};

	U_BOOT_DRIVER(gpio_omap) = {
	.name = "gpio_omap",
	.id = UCLASS_GPIO,
	.ops = &gpio_omap_ops,
	.of_match = omap_gpio_ids,
	.bind = omap_gpio_bind,
	.probe = omap_gpio_probe,
	.priv_auto_alloc_size = sizeof(struct gpio_bank),
	.flags = DM_FLAG_PRE_RELOC,
	};

	#endif /* CONFIG_DM_GPIO */