board/ttcontrol/vision2/imximage_hynix.cfg - platform/external/u-boot - Gitiles

 /*
  * (C) Copyright 2009
  * Stefano Babic DENX Software Engineering sbabic@denx.de.
  *
  * (C) Copyright 2010
  * Klaus Steinhammer TTECH Control Gmbh kst@tttech.com
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not write to the Free Software
  * Foundation Inc. 51 Franklin Street Fifth Floor Boston,
  * MA 02110-1301 USA
  *
  * Refer docs/README.imxmage for more details about how-to configure
  * and create imximage boot image
  *
  * The syntax is taken as close as possible with the kwbimage
  */

 /*
  * Boot Device : one of
  * spi, nand, onenand, sd
  */
 BOOT_FROM	spi

 /*
  * Device Configuration Data (DCD)
  *
  * Each entry must have the format:
  * Addr-type           Address        Value
  *
  * where:
  *	Addr-type register length (1,2 or 4 bytes)
  *	Address	  absolute address of the register
  *	value	  value to be stored in the register
  */

 /*
  * #######################
  * ### Disable WDOG ###
  * #######################
  */
 DATA 2 0x73f98000 0x30

 /*
  * #######################
  * ### SET DDR Clk     ###
  * #######################
  */
 /* CCM: CBMCR - ddr_clk_sel: axi_b (133MHz) */
 DATA 4 0x73FD4018 0x000024C0

 /* DOUBLE SPI CLK (13MHz->26 MHz Clock) */
 DATA 4 0x73FD4038 0x2010241

 /* IOMUXC_SW_PAD_CTL_PAD_CSPI1_MOSI HYS_ENABLE | DRV_MAX | SRE_FAST */
 DATA 4 0x73fa8600 0x00000107
 /* IOMUXC_SW_PAD_CTL_PAD_CSPI1_MISO HYS_ENABLE | DRV_MAX | SRE_FAST */
 DATA 4 0x73fa8604 0x00000107
 /* IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS0 HYS_ENABLE | PKE_ENABLE | DRV_MAX | SRE_FAST */
 DATA 4 0x73fa8608 0x00000187
 /* IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS1 HYS_ENABLE | PKE_ENABLE | DRV_MAX | SRE_FAST */
 DATA 4 0x73fa860c 0x00000187
 /* IOMUXC_SW_PAD_CTL_PAD_CSPI1_SCLK HYS_ENABLE | DRV_MAX | SRE_FAST */
 DATA 4 0x73fa8614 0x00000107
 /* IOMUXC_SW_PAD_CTL_PAD_DI1_PIN11 HYS_ENABLE | DRV_MAX | SRE_FAST (CSPI1_SS2) */
 DATA 4 0x73fa86a8 0x00000187

 /*
  * #######################
  * ### Settings IOMUXC ###
  * #######################
  */
 /*
  * DDR IOMUX configuration
  * Control, Data, Address pads are in their default state: HIGH DS, FAST SR.
  * IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK MAX DS
  */
 DATA 4 0x73fa84b8 0x000000e7
 /* PVTC MAX (at GPC, PGR reg) */
 /* DATA 4 0x73FD8004 0x1fc00000 */

 /* DQM0 DS high slew rate slow */
 DATA 4 0x73fa84d4 0x000000e4
 /* DQM1 DS high slew rate slow */
 DATA 4 0x73fa84d8 0x000000e4
 /* DQM2 DS high slew rate slow */
 DATA 4 0x73fa84dc 0x000000e4
 /* DQM3 DS high slew rate slow */
 DATA 4 0x73fa84e0 0x000000e4

 /* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0 DS high & SLEW slow */
 DATA 4 0x73fa84bc 0x000000c4
 /* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1 DS high & SLEW slow */
 DATA 4 0x73fa84c0 0x000000c4
 /* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS2 DS high & SLEW slow */
 DATA 4 0x73fa84c4 0x000000c4
 /* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS3 DS high & SLEW slow */
 DATA 4 0x73fa84c8 0x000000c4

 /* DRAM_DATA B0 */
 DATA 4 0x73fa88a4 0x00000004
 /* DRAM_DATA B1 */
 DATA 4 0x73fa88ac 0x00000004
 /* DRAM_DATA B2 */
 DATA 4 0x73fa88b8 0x00000004
 /* DRAM_DATA B3 */
 DATA 4 0x73fa882c 0x00000004

 /* DRAM_DATA B0 slew rate */
 DATA 4 0x73fa8878 0x00000000
 /* DRAM_DATA B1 slew rate */
 DATA 4 0x73fa8880 0x00000000
 /* DRAM_DATA B2 slew rate */
 DATA 4 0x73fa888c 0x00000000
 /* DRAM_DATA B3 slew rate */
 DATA 4 0x73fa889c 0x00000000

 /*
  * #######################
  * ### Configure SDRAM ###
  * #######################
  */

 /* Configure CS0 */
 /* ####################### */

 /* ESDCTL0: Enable controller */
 DATA 4 0x83fd9000 0x83220000

 /* Init DRAM on CS0 /
 /* ESDSCR: Precharge command */
 DATA 4 0x83fd9014 0x04008008
 /* ESDSCR: Refresh command */
 DATA 4 0x83fd9014 0x00008010
 /* ESDSCR: Refresh command */
 DATA 4 0x83fd9014 0x00008010
 /* ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8) */
 DATA 4 0x83fd9014 0x00338018
 /* ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51) */
 DATA 4 0x83fd9014 0x0020801a
 /* ESDSCR */
 DATA 4 0x83fd9014 0x00008000

 /* ESDSCR: EMR with full Drive strength */
 /* DATA 4 0x83fd9014 0x0000801a */

 /* ESDCTL0: 14 ROW, 10 COL, 32Bit, SREF=8 */
 DATA 4 0x83fd9000 0xC3220000

 /*
  * ESDCFG0: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks
  *          tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks
  * DATA 4 0x83fd9004 0xC33574AA
  */
 /*
  * micron mDDR
  * ESDCFG0: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks
  * tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
  * DATA 4 0x83FD9004 0x101564a8
  */
 /*
  * hynix mDDR
  * ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks
  * tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
  */
 DATA 4 0x83FD9004 0x704564a8

 /* ESDMISC: AP=10, Bank interleaving on, MIF3 en, RALAT=2 */
 DATA 4 0x83fd9010 0x000a1700

 /* Configure CS1 */
 /* ####################### */

 /* ESDCTL1: Enable controller */
 DATA 4 0x83fd9008 0x83220000

 /* Init DRAM on CS1 */
 /* ESDSCR: Precharge command */
 DATA 4 0x83fd9014 0x0400800c
 /* ESDSCR: Refresh command */
 DATA 4 0x83fd9014 0x00008014
 /* ESDSCR: Refresh command */
 DATA 4 0x83fd9014 0x00008014
 /* ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8) */
 DATA 4 0x83fd9014 0x0033801c
 /* ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51) */
 DATA 4 0x83fd9014 0x0020801e
 /* ESDSCR */
 DATA 4 0x83fd9014 0x00008004

 /* ESDCTL1: 14 ROW, 10 COL, 32Bit, SREF=8 */
 DATA 4 0x83fd9008 0xC3220000
 /*
  * ESDCFG1: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks
  *          tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks
  * DATA 4 0x83fd900c 0xC33574AA
  */
 /*
  * micron mDDR
  * ESDCFG1: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks
  * tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
  * DATA 4 0x83FD900C 0x101564a8
  */
 /*
  * hynix mDDR
  * ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks
  * tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
  */
 DATA 4 0x83FD900C 0x704564a8

 /* ESDSCR (mDRAM configuration finished) */
 DATA 4 0x83FD9014 0x00000004

 /* ESDSCR - clear "configuration request" bit */
 DATA 4 0x83fd9014 0x00000000
	/*
	* (C) Copyright 2009
	* Stefano Babic DENX Software Engineering sbabic@denx.de.
	*
	* (C) Copyright 2010
	* Klaus Steinhammer TTECH Control Gmbh kst@tttech.com
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not write to the Free Software
	* Foundation Inc. 51 Franklin Street Fifth Floor Boston,
	* MA 02110-1301 USA
	*
	* Refer docs/README.imxmage for more details about how-to configure
	* and create imximage boot image
	*
	* The syntax is taken as close as possible with the kwbimage
	*/

	/*
	* Boot Device : one of
	* spi, nand, onenand, sd
	*/
	BOOT_FROM spi

	/*
	* Device Configuration Data (DCD)
	*
	* Each entry must have the format:
	* Addr-type Address Value
	*
	* where:
	* Addr-type register length (1,2 or 4 bytes)
	* Address absolute address of the register
	* value value to be stored in the register
	*/

	/*
	* #######################
	* ### Disable WDOG ###
	* #######################
	*/
	DATA 2 0x73f98000 0x30

	/*
	* #######################
	* ### SET DDR Clk ###
	* #######################
	*/
	/* CCM: CBMCR - ddr_clk_sel: axi_b (133MHz) */
	DATA 4 0x73FD4018 0x000024C0

	/* DOUBLE SPI CLK (13MHz->26 MHz Clock) */
	DATA 4 0x73FD4038 0x2010241

	/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_MOSI HYS_ENABLE \| DRV_MAX \| SRE_FAST */
	DATA 4 0x73fa8600 0x00000107
	/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_MISO HYS_ENABLE \| DRV_MAX \| SRE_FAST */
	DATA 4 0x73fa8604 0x00000107
	/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS0 HYS_ENABLE \| PKE_ENABLE \| DRV_MAX \| SRE_FAST */
	DATA 4 0x73fa8608 0x00000187
	/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS1 HYS_ENABLE \| PKE_ENABLE \| DRV_MAX \| SRE_FAST */
	DATA 4 0x73fa860c 0x00000187
	/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_SCLK HYS_ENABLE \| DRV_MAX \| SRE_FAST */
	DATA 4 0x73fa8614 0x00000107
	/* IOMUXC_SW_PAD_CTL_PAD_DI1_PIN11 HYS_ENABLE \| DRV_MAX \| SRE_FAST (CSPI1_SS2) */
	DATA 4 0x73fa86a8 0x00000187

	/*
	* #######################
	* ### Settings IOMUXC ###
	* #######################
	*/
	/*
	* DDR IOMUX configuration
	* Control, Data, Address pads are in their default state: HIGH DS, FAST SR.
	* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK MAX DS
	*/
	DATA 4 0x73fa84b8 0x000000e7
	/* PVTC MAX (at GPC, PGR reg) */
	/* DATA 4 0x73FD8004 0x1fc00000 */

	/* DQM0 DS high slew rate slow */
	DATA 4 0x73fa84d4 0x000000e4
	/* DQM1 DS high slew rate slow */
	DATA 4 0x73fa84d8 0x000000e4
	/* DQM2 DS high slew rate slow */
	DATA 4 0x73fa84dc 0x000000e4
	/* DQM3 DS high slew rate slow */
	DATA 4 0x73fa84e0 0x000000e4

	/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0 DS high & SLEW slow */
	DATA 4 0x73fa84bc 0x000000c4
	/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1 DS high & SLEW slow */
	DATA 4 0x73fa84c0 0x000000c4
	/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS2 DS high & SLEW slow */
	DATA 4 0x73fa84c4 0x000000c4
	/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS3 DS high & SLEW slow */
	DATA 4 0x73fa84c8 0x000000c4

	/* DRAM_DATA B0 */
	DATA 4 0x73fa88a4 0x00000004
	/* DRAM_DATA B1 */
	DATA 4 0x73fa88ac 0x00000004
	/* DRAM_DATA B2 */
	DATA 4 0x73fa88b8 0x00000004
	/* DRAM_DATA B3 */
	DATA 4 0x73fa882c 0x00000004

	/* DRAM_DATA B0 slew rate */
	DATA 4 0x73fa8878 0x00000000
	/* DRAM_DATA B1 slew rate */
	DATA 4 0x73fa8880 0x00000000
	/* DRAM_DATA B2 slew rate */
	DATA 4 0x73fa888c 0x00000000
	/* DRAM_DATA B3 slew rate */
	DATA 4 0x73fa889c 0x00000000

	/*
	* #######################
	* ### Configure SDRAM ###
	* #######################
	*/

	/* Configure CS0 */
	/* ####################### */

	/* ESDCTL0: Enable controller */
	DATA 4 0x83fd9000 0x83220000

	/* Init DRAM on CS0 /
	/* ESDSCR: Precharge command */
	DATA 4 0x83fd9014 0x04008008
	/* ESDSCR: Refresh command */
	DATA 4 0x83fd9014 0x00008010
	/* ESDSCR: Refresh command */
	DATA 4 0x83fd9014 0x00008010
	/* ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8) */
	DATA 4 0x83fd9014 0x00338018
	/* ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51) */
	DATA 4 0x83fd9014 0x0020801a
	/* ESDSCR */
	DATA 4 0x83fd9014 0x00008000

	/* ESDSCR: EMR with full Drive strength */
	/* DATA 4 0x83fd9014 0x0000801a */

	/* ESDCTL0: 14 ROW, 10 COL, 32Bit, SREF=8 */
	DATA 4 0x83fd9000 0xC3220000

	/*
	* ESDCFG0: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks
	* tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks
	* DATA 4 0x83fd9004 0xC33574AA
	*/
	/*
	* micron mDDR
	* ESDCFG0: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks
	* tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
	* DATA 4 0x83FD9004 0x101564a8
	*/
	/*
	* hynix mDDR
	* ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks
	* tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
	*/
	DATA 4 0x83FD9004 0x704564a8

	/* ESDMISC: AP=10, Bank interleaving on, MIF3 en, RALAT=2 */
	DATA 4 0x83fd9010 0x000a1700

	/* Configure CS1 */
	/* ####################### */

	/* ESDCTL1: Enable controller */
	DATA 4 0x83fd9008 0x83220000

	/* Init DRAM on CS1 */
	/* ESDSCR: Precharge command */
	DATA 4 0x83fd9014 0x0400800c
	/* ESDSCR: Refresh command */
	DATA 4 0x83fd9014 0x00008014
	/* ESDSCR: Refresh command */
	DATA 4 0x83fd9014 0x00008014
	/* ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8) */
	DATA 4 0x83fd9014 0x0033801c
	/* ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51) */
	DATA 4 0x83fd9014 0x0020801e
	/* ESDSCR */
	DATA 4 0x83fd9014 0x00008004

	/* ESDCTL1: 14 ROW, 10 COL, 32Bit, SREF=8 */
	DATA 4 0x83fd9008 0xC3220000
	/*
	* ESDCFG1: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks
	* tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks
	* DATA 4 0x83fd900c 0xC33574AA
	*/
	/*
	* micron mDDR
	* ESDCFG1: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks
	* tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
	* DATA 4 0x83FD900C 0x101564a8
	*/
	/*
	* hynix mDDR
	* ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks
	* tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks
	*/
	DATA 4 0x83FD900C 0x704564a8

	/* ESDSCR (mDRAM configuration finished) */
	DATA 4 0x83FD9014 0x00000004

	/* ESDSCR - clear "configuration request" bit */
	DATA 4 0x83fd9014 0x00000000