| /* |
| * Copyright 1994, 1995, 2000 Neil Russell. |
| * (See License) |
| * Copyright 2000, 2001 DENX Software Engineering, Wolfgang Denk, wd@denx.de |
| * Copyright 2011 Comelit Group SpA, |
| * Luca Ceresoli <luca.ceresoli@comelit.it> |
| */ |
| #include <common.h> |
| #include <command.h> |
| #include <efi_loader.h> |
| #include <env.h> |
| #include <image.h> |
| #include <lmb.h> |
| #include <log.h> |
| #include <mapmem.h> |
| #include <net.h> |
| #include <net/tftp.h> |
| #include "bootp.h" |
| #ifdef CONFIG_SYS_DIRECT_FLASH_TFTP |
| #include <flash.h> |
| #endif |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* Well known TFTP port # */ |
| #define WELL_KNOWN_PORT 69 |
| /* Millisecs to timeout for lost pkt */ |
| #define TIMEOUT 5000UL |
| #ifndef CONFIG_NET_RETRY_COUNT |
| /* # of timeouts before giving up */ |
| # define TIMEOUT_COUNT 10 |
| #else |
| # define TIMEOUT_COUNT (CONFIG_NET_RETRY_COUNT * 2) |
| #endif |
| /* Number of "loading" hashes per line (for checking the image size) */ |
| #define HASHES_PER_LINE 65 |
| |
| /* |
| * TFTP operations. |
| */ |
| #define TFTP_RRQ 1 |
| #define TFTP_WRQ 2 |
| #define TFTP_DATA 3 |
| #define TFTP_ACK 4 |
| #define TFTP_ERROR 5 |
| #define TFTP_OACK 6 |
| |
| static ulong timeout_ms = TIMEOUT; |
| static int timeout_count_max = TIMEOUT_COUNT; |
| static ulong time_start; /* Record time we started tftp */ |
| |
| /* |
| * These globals govern the timeout behavior when attempting a connection to a |
| * TFTP server. tftp_timeout_ms specifies the number of milliseconds to |
| * wait for the server to respond to initial connection. Second global, |
| * tftp_timeout_count_max, gives the number of such connection retries. |
| * tftp_timeout_count_max must be non-negative and tftp_timeout_ms must be |
| * positive. The globals are meant to be set (and restored) by code needing |
| * non-standard timeout behavior when initiating a TFTP transfer. |
| */ |
| ulong tftp_timeout_ms = TIMEOUT; |
| int tftp_timeout_count_max = TIMEOUT_COUNT; |
| |
| enum { |
| TFTP_ERR_UNDEFINED = 0, |
| TFTP_ERR_FILE_NOT_FOUND = 1, |
| TFTP_ERR_ACCESS_DENIED = 2, |
| TFTP_ERR_DISK_FULL = 3, |
| TFTP_ERR_UNEXPECTED_OPCODE = 4, |
| TFTP_ERR_UNKNOWN_TRANSFER_ID = 5, |
| TFTP_ERR_FILE_ALREADY_EXISTS = 6, |
| TFTP_ERR_OPTION_NEGOTIATION = 8, |
| }; |
| |
| static struct in_addr tftp_remote_ip; |
| /* The UDP port at their end */ |
| static int tftp_remote_port; |
| /* The UDP port at our end */ |
| static int tftp_our_port; |
| static int timeout_count; |
| /* packet sequence number */ |
| static ulong tftp_cur_block; |
| /* last packet sequence number received */ |
| static ulong tftp_prev_block; |
| /* count of sequence number wraparounds */ |
| static ulong tftp_block_wrap; |
| /* memory offset due to wrapping */ |
| static ulong tftp_block_wrap_offset; |
| static int tftp_state; |
| static ulong tftp_load_addr; |
| #ifdef CONFIG_LMB |
| static ulong tftp_load_size; |
| #endif |
| #ifdef CONFIG_TFTP_TSIZE |
| /* The file size reported by the server */ |
| static int tftp_tsize; |
| /* The number of hashes we printed */ |
| static short tftp_tsize_num_hash; |
| #endif |
| /* The window size negotiated */ |
| static ushort tftp_windowsize; |
| /* Next block to send ack to */ |
| static ushort tftp_next_ack; |
| /* Last nack block we send */ |
| static ushort tftp_last_nack; |
| #ifdef CONFIG_CMD_TFTPPUT |
| /* 1 if writing, else 0 */ |
| static int tftp_put_active; |
| /* 1 if we have sent the last block */ |
| static int tftp_put_final_block_sent; |
| #else |
| #define tftp_put_active 0 |
| #endif |
| |
| #define STATE_SEND_RRQ 1 |
| #define STATE_DATA 2 |
| #define STATE_TOO_LARGE 3 |
| #define STATE_BAD_MAGIC 4 |
| #define STATE_OACK 5 |
| #define STATE_RECV_WRQ 6 |
| #define STATE_SEND_WRQ 7 |
| #define STATE_INVALID_OPTION 8 |
| |
| /* default TFTP block size */ |
| #define TFTP_BLOCK_SIZE 512 |
| /* sequence number is 16 bit */ |
| #define TFTP_SEQUENCE_SIZE ((ulong)(1<<16)) |
| |
| #define DEFAULT_NAME_LEN (8 + 4 + 1) |
| static char default_filename[DEFAULT_NAME_LEN]; |
| |
| #ifndef CONFIG_TFTP_FILE_NAME_MAX_LEN |
| #define MAX_LEN 128 |
| #else |
| #define MAX_LEN CONFIG_TFTP_FILE_NAME_MAX_LEN |
| #endif |
| |
| static char tftp_filename[MAX_LEN]; |
| |
| /* 512 is poor choice for ethernet, MTU is typically 1500. |
| * Minus eth.hdrs thats 1468. Can get 2x better throughput with |
| * almost-MTU block sizes. At least try... fall back to 512 if need be. |
| * (but those using CONFIG_IP_DEFRAG may want to set a larger block in cfg file) |
| */ |
| |
| /* When windowsize is defined to 1, |
| * tftp behaves the same way as it was |
| * never declared |
| */ |
| #ifdef CONFIG_TFTP_WINDOWSIZE |
| #define TFTP_WINDOWSIZE CONFIG_TFTP_WINDOWSIZE |
| #else |
| #define TFTP_WINDOWSIZE 1 |
| #endif |
| |
| static unsigned short tftp_block_size = TFTP_BLOCK_SIZE; |
| static unsigned short tftp_block_size_option = CONFIG_TFTP_BLOCKSIZE; |
| static unsigned short tftp_window_size_option = TFTP_WINDOWSIZE; |
| |
| static inline int store_block(int block, uchar *src, unsigned int len) |
| { |
| ulong offset = block * tftp_block_size + tftp_block_wrap_offset; |
| ulong newsize = offset + len; |
| ulong store_addr = tftp_load_addr + offset; |
| #ifdef CONFIG_SYS_DIRECT_FLASH_TFTP |
| int i, rc = 0; |
| |
| for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { |
| /* start address in flash? */ |
| if (flash_info[i].flash_id == FLASH_UNKNOWN) |
| continue; |
| if (store_addr >= flash_info[i].start[0]) { |
| rc = 1; |
| break; |
| } |
| } |
| |
| if (rc) { /* Flash is destination for this packet */ |
| rc = flash_write((char *)src, store_addr, len); |
| if (rc) { |
| flash_perror(rc); |
| return rc; |
| } |
| } else |
| #endif /* CONFIG_SYS_DIRECT_FLASH_TFTP */ |
| { |
| void *ptr; |
| |
| #ifdef CONFIG_LMB |
| ulong end_addr = tftp_load_addr + tftp_load_size; |
| |
| if (!end_addr) |
| end_addr = ULONG_MAX; |
| |
| if (store_addr < tftp_load_addr || |
| store_addr + len > end_addr) { |
| puts("\nTFTP error: "); |
| puts("trying to overwrite reserved memory...\n"); |
| return -1; |
| } |
| #endif |
| ptr = map_sysmem(store_addr, len); |
| memcpy(ptr, src, len); |
| unmap_sysmem(ptr); |
| } |
| |
| if (net_boot_file_size < newsize) |
| net_boot_file_size = newsize; |
| |
| return 0; |
| } |
| |
| /* Clear our state ready for a new transfer */ |
| static void new_transfer(void) |
| { |
| tftp_prev_block = 0; |
| tftp_block_wrap = 0; |
| tftp_block_wrap_offset = 0; |
| #ifdef CONFIG_CMD_TFTPPUT |
| tftp_put_final_block_sent = 0; |
| #endif |
| } |
| |
| #ifdef CONFIG_CMD_TFTPPUT |
| /** |
| * Load the next block from memory to be sent over tftp. |
| * |
| * @param block Block number to send |
| * @param dst Destination buffer for data |
| * @param len Number of bytes in block (this one and every other) |
| * @return number of bytes loaded |
| */ |
| static int load_block(unsigned block, uchar *dst, unsigned len) |
| { |
| /* We may want to get the final block from the previous set */ |
| ulong offset = ((int)block - 1) * len + tftp_block_wrap_offset; |
| ulong tosend = len; |
| |
| tosend = min(net_boot_file_size - offset, tosend); |
| (void)memcpy(dst, (void *)(image_save_addr + offset), tosend); |
| debug("%s: block=%u, offset=%lu, len=%u, tosend=%lu\n", __func__, |
| block, offset, len, tosend); |
| return tosend; |
| } |
| #endif |
| |
| static void tftp_send(void); |
| static void tftp_timeout_handler(void); |
| |
| /**********************************************************************/ |
| |
| static void show_block_marker(void) |
| { |
| ulong pos; |
| |
| #ifdef CONFIG_TFTP_TSIZE |
| if (tftp_tsize) { |
| pos = tftp_cur_block * tftp_block_size + |
| tftp_block_wrap_offset; |
| if (pos > tftp_tsize) |
| pos = tftp_tsize; |
| |
| while (tftp_tsize_num_hash < pos * 50 / tftp_tsize) { |
| putc('#'); |
| tftp_tsize_num_hash++; |
| } |
| } else |
| #endif |
| { |
| pos = (tftp_cur_block - 1) + |
| (tftp_block_wrap * TFTP_SEQUENCE_SIZE); |
| if ((pos % 10) == 0) |
| putc('#'); |
| else if (((pos + 1) % (10 * HASHES_PER_LINE)) == 0) |
| puts("\n\t "); |
| } |
| } |
| |
| /** |
| * restart the current transfer due to an error |
| * |
| * @param msg Message to print for user |
| */ |
| static void restart(const char *msg) |
| { |
| printf("\n%s; starting again\n", msg); |
| net_start_again(); |
| } |
| |
| /* |
| * Check if the block number has wrapped, and update progress |
| * |
| * TODO: The egregious use of global variables in this file should be tidied. |
| */ |
| static void update_block_number(void) |
| { |
| /* |
| * RFC1350 specifies that the first data packet will |
| * have sequence number 1. If we receive a sequence |
| * number of 0 this means that there was a wrap |
| * around of the (16 bit) counter. |
| */ |
| if (tftp_cur_block == 0 && tftp_prev_block != 0) { |
| tftp_block_wrap++; |
| tftp_block_wrap_offset += tftp_block_size * TFTP_SEQUENCE_SIZE; |
| timeout_count = 0; /* we've done well, reset the timeout */ |
| } |
| show_block_marker(); |
| } |
| |
| /* The TFTP get or put is complete */ |
| static void tftp_complete(void) |
| { |
| #ifdef CONFIG_TFTP_TSIZE |
| /* Print hash marks for the last packet received */ |
| while (tftp_tsize && tftp_tsize_num_hash < 49) { |
| putc('#'); |
| tftp_tsize_num_hash++; |
| } |
| puts(" "); |
| print_size(tftp_tsize, ""); |
| #endif |
| time_start = get_timer(time_start); |
| if (time_start > 0) { |
| puts("\n\t "); /* Line up with "Loading: " */ |
| print_size(net_boot_file_size / |
| time_start * 1000, "/s"); |
| } |
| puts("\ndone\n"); |
| net_set_state(NETLOOP_SUCCESS); |
| } |
| |
| static void tftp_send(void) |
| { |
| uchar *pkt; |
| uchar *xp; |
| int len = 0; |
| ushort *s; |
| bool err_pkt = false; |
| |
| /* |
| * We will always be sending some sort of packet, so |
| * cobble together the packet headers now. |
| */ |
| pkt = net_tx_packet + net_eth_hdr_size() + IP_UDP_HDR_SIZE; |
| |
| switch (tftp_state) { |
| case STATE_SEND_RRQ: |
| case STATE_SEND_WRQ: |
| xp = pkt; |
| s = (ushort *)pkt; |
| #ifdef CONFIG_CMD_TFTPPUT |
| *s++ = htons(tftp_state == STATE_SEND_RRQ ? TFTP_RRQ : |
| TFTP_WRQ); |
| #else |
| *s++ = htons(TFTP_RRQ); |
| #endif |
| pkt = (uchar *)s; |
| strcpy((char *)pkt, tftp_filename); |
| pkt += strlen(tftp_filename) + 1; |
| strcpy((char *)pkt, "octet"); |
| pkt += 5 /*strlen("octet")*/ + 1; |
| strcpy((char *)pkt, "timeout"); |
| pkt += 7 /*strlen("timeout")*/ + 1; |
| sprintf((char *)pkt, "%lu", timeout_ms / 1000); |
| debug("send option \"timeout %s\"\n", (char *)pkt); |
| pkt += strlen((char *)pkt) + 1; |
| #ifdef CONFIG_TFTP_TSIZE |
| pkt += sprintf((char *)pkt, "tsize%c%u%c", |
| 0, net_boot_file_size, 0); |
| #endif |
| /* try for more effic. blk size */ |
| pkt += sprintf((char *)pkt, "blksize%c%d%c", |
| 0, tftp_block_size_option, 0); |
| |
| /* try for more effic. window size. |
| * Implemented only for tftp get. |
| * Don't bother sending if it's 1 |
| */ |
| if (tftp_state == STATE_SEND_RRQ && tftp_window_size_option > 1) |
| pkt += sprintf((char *)pkt, "windowsize%c%d%c", |
| 0, tftp_window_size_option, 0); |
| len = pkt - xp; |
| break; |
| |
| case STATE_OACK: |
| |
| case STATE_RECV_WRQ: |
| case STATE_DATA: |
| xp = pkt; |
| s = (ushort *)pkt; |
| s[0] = htons(TFTP_ACK); |
| s[1] = htons(tftp_cur_block); |
| pkt = (uchar *)(s + 2); |
| #ifdef CONFIG_CMD_TFTPPUT |
| if (tftp_put_active) { |
| int toload = tftp_block_size; |
| int loaded = load_block(tftp_cur_block, pkt, toload); |
| |
| s[0] = htons(TFTP_DATA); |
| pkt += loaded; |
| tftp_put_final_block_sent = (loaded < toload); |
| } |
| #endif |
| len = pkt - xp; |
| break; |
| |
| case STATE_TOO_LARGE: |
| xp = pkt; |
| s = (ushort *)pkt; |
| *s++ = htons(TFTP_ERROR); |
| *s++ = htons(3); |
| |
| pkt = (uchar *)s; |
| strcpy((char *)pkt, "File too large"); |
| pkt += 14 /*strlen("File too large")*/ + 1; |
| len = pkt - xp; |
| err_pkt = true; |
| break; |
| |
| case STATE_BAD_MAGIC: |
| xp = pkt; |
| s = (ushort *)pkt; |
| *s++ = htons(TFTP_ERROR); |
| *s++ = htons(2); |
| pkt = (uchar *)s; |
| strcpy((char *)pkt, "File has bad magic"); |
| pkt += 18 /*strlen("File has bad magic")*/ + 1; |
| len = pkt - xp; |
| err_pkt = true; |
| break; |
| |
| case STATE_INVALID_OPTION: |
| xp = pkt; |
| s = (ushort *)pkt; |
| *s++ = htons(TFTP_ERROR); |
| *s++ = htons(TFTP_ERR_OPTION_NEGOTIATION); |
| pkt = (uchar *)s; |
| strcpy((char *)pkt, "Option Negotiation Failed"); |
| /* strlen("Option Negotiation Failed") + NULL*/ |
| pkt += 25 + 1; |
| len = pkt - xp; |
| err_pkt = true; |
| break; |
| } |
| |
| net_send_udp_packet(net_server_ethaddr, tftp_remote_ip, |
| tftp_remote_port, tftp_our_port, len); |
| |
| if (err_pkt) |
| net_set_state(NETLOOP_FAIL); |
| } |
| |
| #ifdef CONFIG_CMD_TFTPPUT |
| static void icmp_handler(unsigned type, unsigned code, unsigned dest, |
| struct in_addr sip, unsigned src, uchar *pkt, |
| unsigned len) |
| { |
| if (type == ICMP_NOT_REACH && code == ICMP_NOT_REACH_PORT) { |
| /* Oh dear the other end has gone away */ |
| restart("TFTP server died"); |
| } |
| } |
| #endif |
| |
| static void tftp_handler(uchar *pkt, unsigned dest, struct in_addr sip, |
| unsigned src, unsigned len) |
| { |
| __be16 proto; |
| __be16 *s; |
| int i; |
| u16 timeout_val_rcvd; |
| |
| if (dest != tftp_our_port) { |
| return; |
| } |
| if (tftp_state != STATE_SEND_RRQ && src != tftp_remote_port && |
| tftp_state != STATE_RECV_WRQ && tftp_state != STATE_SEND_WRQ) |
| return; |
| |
| if (len < 2) |
| return; |
| len -= 2; |
| /* warning: don't use increment (++) in ntohs() macros!! */ |
| s = (__be16 *)pkt; |
| proto = *s++; |
| pkt = (uchar *)s; |
| switch (ntohs(proto)) { |
| case TFTP_RRQ: |
| break; |
| |
| case TFTP_ACK: |
| #ifdef CONFIG_CMD_TFTPPUT |
| if (tftp_put_active) { |
| if (tftp_put_final_block_sent) { |
| tftp_complete(); |
| } else { |
| /* |
| * Move to the next block. We want our block |
| * count to wrap just like the other end! |
| */ |
| int block = ntohs(*s); |
| int ack_ok = (tftp_cur_block == block); |
| |
| tftp_cur_block = (unsigned short)(block + 1); |
| update_block_number(); |
| if (ack_ok) |
| tftp_send(); /* Send next data block */ |
| } |
| } |
| #endif |
| break; |
| |
| default: |
| break; |
| |
| #ifdef CONFIG_CMD_TFTPSRV |
| case TFTP_WRQ: |
| debug("Got WRQ\n"); |
| tftp_remote_ip = sip; |
| tftp_remote_port = src; |
| tftp_our_port = 1024 + (get_timer(0) % 3072); |
| new_transfer(); |
| tftp_send(); /* Send ACK(0) */ |
| break; |
| #endif |
| |
| case TFTP_OACK: |
| debug("Got OACK: "); |
| for (i = 0; i < len; i++) { |
| if (pkt[i] == '\0') |
| debug(" "); |
| else |
| debug("%c", pkt[i]); |
| } |
| debug("\n"); |
| tftp_state = STATE_OACK; |
| tftp_remote_port = src; |
| /* |
| * Check for 'blksize' option. |
| * Careful: "i" is signed, "len" is unsigned, thus |
| * something like "len-8" may give a *huge* number |
| */ |
| for (i = 0; i+8 < len; i++) { |
| if (strcasecmp((char *)pkt + i, "blksize") == 0) { |
| tftp_block_size = (unsigned short) |
| simple_strtoul((char *)pkt + i + 8, |
| NULL, 10); |
| debug("Blocksize oack: %s, %d\n", |
| (char *)pkt + i + 8, tftp_block_size); |
| if (tftp_block_size > tftp_block_size_option) { |
| printf("Invalid blk size(=%d)\n", |
| tftp_block_size); |
| tftp_state = STATE_INVALID_OPTION; |
| } |
| } |
| if (strcasecmp((char *)pkt + i, "timeout") == 0) { |
| timeout_val_rcvd = (unsigned short) |
| simple_strtoul((char *)pkt + i + 8, |
| NULL, 10); |
| debug("Timeout oack: %s, %d\n", |
| (char *)pkt + i + 8, timeout_val_rcvd); |
| if (timeout_val_rcvd != (timeout_ms / 1000)) { |
| printf("Invalid timeout val(=%d s)\n", |
| timeout_val_rcvd); |
| tftp_state = STATE_INVALID_OPTION; |
| } |
| } |
| #ifdef CONFIG_TFTP_TSIZE |
| if (strcasecmp((char *)pkt + i, "tsize") == 0) { |
| tftp_tsize = simple_strtoul((char *)pkt + i + 6, |
| NULL, 10); |
| debug("size = %s, %d\n", |
| (char *)pkt + i + 6, tftp_tsize); |
| } |
| #endif |
| if (strcasecmp((char *)pkt + i, "windowsize") == 0) { |
| tftp_windowsize = |
| simple_strtoul((char *)pkt + i + 11, |
| NULL, 10); |
| debug("windowsize = %s, %d\n", |
| (char *)pkt + i + 11, tftp_windowsize); |
| } |
| } |
| |
| tftp_next_ack = tftp_windowsize; |
| |
| #ifdef CONFIG_CMD_TFTPPUT |
| if (tftp_put_active && tftp_state == STATE_OACK) { |
| /* Get ready to send the first block */ |
| tftp_state = STATE_DATA; |
| tftp_cur_block++; |
| } |
| #endif |
| tftp_send(); /* Send ACK or first data block */ |
| break; |
| case TFTP_DATA: |
| if (len < 2) |
| return; |
| len -= 2; |
| |
| if (ntohs(*(__be16 *)pkt) != (ushort)(tftp_cur_block + 1)) { |
| debug("Received unexpected block: %d, expected: %d\n", |
| ntohs(*(__be16 *)pkt), |
| (ushort)(tftp_cur_block + 1)); |
| /* |
| * If one packet is dropped most likely |
| * all other buffers in the window |
| * that will arrive will cause a sending NACK. |
| * This just overwellms the server, let's just send one. |
| */ |
| if (tftp_last_nack != tftp_cur_block) { |
| tftp_send(); |
| tftp_last_nack = tftp_cur_block; |
| tftp_next_ack = (ushort)(tftp_cur_block + |
| tftp_windowsize); |
| } |
| break; |
| } |
| |
| tftp_cur_block++; |
| tftp_cur_block %= TFTP_SEQUENCE_SIZE; |
| |
| if (tftp_state == STATE_SEND_RRQ) |
| debug("Server did not acknowledge any options!\n"); |
| |
| if (tftp_state == STATE_SEND_RRQ || tftp_state == STATE_OACK || |
| tftp_state == STATE_RECV_WRQ) { |
| /* first block received */ |
| tftp_state = STATE_DATA; |
| tftp_remote_port = src; |
| new_transfer(); |
| |
| if (tftp_cur_block != 1) { /* Assertion */ |
| puts("\nTFTP error: "); |
| printf("First block is not block 1 (%ld)\n", |
| tftp_cur_block); |
| puts("Starting again\n\n"); |
| net_start_again(); |
| break; |
| } |
| } |
| |
| if (tftp_cur_block == tftp_prev_block) { |
| /* Same block again; ignore it. */ |
| break; |
| } |
| |
| update_block_number(); |
| tftp_prev_block = tftp_cur_block; |
| timeout_count_max = tftp_timeout_count_max; |
| net_set_timeout_handler(timeout_ms, tftp_timeout_handler); |
| |
| if (store_block(tftp_cur_block - 1, pkt + 2, len)) { |
| eth_halt(); |
| net_set_state(NETLOOP_FAIL); |
| break; |
| } |
| |
| /* |
| * Acknowledge the block just received, which will prompt |
| * the remote for the next one. |
| */ |
| if (tftp_cur_block == tftp_next_ack) { |
| tftp_send(); |
| tftp_next_ack += tftp_windowsize; |
| } |
| |
| if (len < tftp_block_size) { |
| tftp_send(); |
| tftp_complete(); |
| } |
| break; |
| |
| case TFTP_ERROR: |
| printf("\nTFTP error: '%s' (%d)\n", |
| pkt + 2, ntohs(*(__be16 *)pkt)); |
| |
| switch (ntohs(*(__be16 *)pkt)) { |
| case TFTP_ERR_FILE_NOT_FOUND: |
| case TFTP_ERR_ACCESS_DENIED: |
| puts("Not retrying...\n"); |
| eth_halt(); |
| net_set_state(NETLOOP_FAIL); |
| break; |
| case TFTP_ERR_UNDEFINED: |
| case TFTP_ERR_DISK_FULL: |
| case TFTP_ERR_UNEXPECTED_OPCODE: |
| case TFTP_ERR_UNKNOWN_TRANSFER_ID: |
| case TFTP_ERR_FILE_ALREADY_EXISTS: |
| default: |
| puts("Starting again\n\n"); |
| net_start_again(); |
| break; |
| } |
| break; |
| } |
| } |
| |
| |
| static void tftp_timeout_handler(void) |
| { |
| if (++timeout_count > timeout_count_max) { |
| restart("Retry count exceeded"); |
| } else { |
| puts("T "); |
| net_set_timeout_handler(timeout_ms, tftp_timeout_handler); |
| if (tftp_state != STATE_RECV_WRQ) |
| tftp_send(); |
| } |
| } |
| |
| /* Initialize tftp_load_addr and tftp_load_size from image_load_addr and lmb */ |
| static int tftp_init_load_addr(void) |
| { |
| #ifdef CONFIG_LMB |
| struct lmb lmb; |
| phys_size_t max_size; |
| |
| lmb_init_and_reserve(&lmb, gd->bd, (void *)gd->fdt_blob); |
| |
| max_size = lmb_get_free_size(&lmb, image_load_addr); |
| if (!max_size) |
| return -1; |
| |
| tftp_load_size = max_size; |
| #endif |
| tftp_load_addr = image_load_addr; |
| return 0; |
| } |
| |
| void tftp_start(enum proto_t protocol) |
| { |
| #if CONFIG_NET_TFTP_VARS |
| char *ep; /* Environment pointer */ |
| |
| /* |
| * Allow the user to choose TFTP blocksize and timeout. |
| * TFTP protocol has a minimal timeout of 1 second. |
| */ |
| |
| ep = env_get("tftpblocksize"); |
| if (ep != NULL) |
| tftp_block_size_option = simple_strtol(ep, NULL, 10); |
| |
| ep = env_get("tftpwindowsize"); |
| if (ep != NULL) |
| tftp_window_size_option = simple_strtol(ep, NULL, 10); |
| |
| ep = env_get("tftptimeout"); |
| if (ep != NULL) |
| timeout_ms = simple_strtol(ep, NULL, 10); |
| |
| if (timeout_ms < 1000) { |
| printf("TFTP timeout (%ld ms) too low, set min = 1000 ms\n", |
| timeout_ms); |
| timeout_ms = 1000; |
| } |
| |
| ep = env_get("tftptimeoutcountmax"); |
| if (ep != NULL) |
| tftp_timeout_count_max = simple_strtol(ep, NULL, 10); |
| |
| if (tftp_timeout_count_max < 0) { |
| printf("TFTP timeout count max (%d ms) negative, set to 0\n", |
| tftp_timeout_count_max); |
| tftp_timeout_count_max = 0; |
| } |
| #endif |
| |
| debug("TFTP blocksize = %i, TFTP windowsize = %d timeout = %ld ms\n", |
| tftp_block_size_option, tftp_window_size_option, timeout_ms); |
| |
| tftp_remote_ip = net_server_ip; |
| if (!net_parse_bootfile(&tftp_remote_ip, tftp_filename, MAX_LEN)) { |
| sprintf(default_filename, "%02X%02X%02X%02X.img", |
| net_ip.s_addr & 0xFF, |
| (net_ip.s_addr >> 8) & 0xFF, |
| (net_ip.s_addr >> 16) & 0xFF, |
| (net_ip.s_addr >> 24) & 0xFF); |
| |
| strncpy(tftp_filename, default_filename, DEFAULT_NAME_LEN); |
| tftp_filename[DEFAULT_NAME_LEN - 1] = 0; |
| |
| printf("*** Warning: no boot file name; using '%s'\n", |
| tftp_filename); |
| } |
| |
| printf("Using %s device\n", eth_get_name()); |
| printf("TFTP %s server %pI4; our IP address is %pI4", |
| #ifdef CONFIG_CMD_TFTPPUT |
| protocol == TFTPPUT ? "to" : "from", |
| #else |
| "from", |
| #endif |
| &tftp_remote_ip, &net_ip); |
| |
| /* Check if we need to send across this subnet */ |
| if (net_gateway.s_addr && net_netmask.s_addr) { |
| struct in_addr our_net; |
| struct in_addr remote_net; |
| |
| our_net.s_addr = net_ip.s_addr & net_netmask.s_addr; |
| remote_net.s_addr = tftp_remote_ip.s_addr & net_netmask.s_addr; |
| if (our_net.s_addr != remote_net.s_addr) |
| printf("; sending through gateway %pI4", &net_gateway); |
| } |
| putc('\n'); |
| |
| printf("Filename '%s'.", tftp_filename); |
| |
| if (net_boot_file_expected_size_in_blocks) { |
| printf(" Size is 0x%x Bytes = ", |
| net_boot_file_expected_size_in_blocks << 9); |
| print_size(net_boot_file_expected_size_in_blocks << 9, ""); |
| } |
| |
| putc('\n'); |
| #ifdef CONFIG_CMD_TFTPPUT |
| tftp_put_active = (protocol == TFTPPUT); |
| if (tftp_put_active) { |
| printf("Save address: 0x%lx\n", image_save_addr); |
| printf("Save size: 0x%lx\n", image_save_size); |
| net_boot_file_size = image_save_size; |
| puts("Saving: *\b"); |
| tftp_state = STATE_SEND_WRQ; |
| new_transfer(); |
| } else |
| #endif |
| { |
| if (tftp_init_load_addr()) { |
| eth_halt(); |
| net_set_state(NETLOOP_FAIL); |
| puts("\nTFTP error: "); |
| puts("trying to overwrite reserved memory...\n"); |
| return; |
| } |
| printf("Load address: 0x%lx\n", tftp_load_addr); |
| puts("Loading: *\b"); |
| tftp_state = STATE_SEND_RRQ; |
| #ifdef CONFIG_CMD_BOOTEFI |
| efi_set_bootdev("Net", "", tftp_filename); |
| #endif |
| } |
| |
| time_start = get_timer(0); |
| timeout_count_max = tftp_timeout_count_max; |
| |
| net_set_timeout_handler(timeout_ms, tftp_timeout_handler); |
| net_set_udp_handler(tftp_handler); |
| #ifdef CONFIG_CMD_TFTPPUT |
| net_set_icmp_handler(icmp_handler); |
| #endif |
| tftp_remote_port = WELL_KNOWN_PORT; |
| timeout_count = 0; |
| /* Use a pseudo-random port unless a specific port is set */ |
| tftp_our_port = 1024 + (get_timer(0) % 3072); |
| |
| #ifdef CONFIG_TFTP_PORT |
| ep = env_get("tftpdstp"); |
| if (ep != NULL) |
| tftp_remote_port = simple_strtol(ep, NULL, 10); |
| ep = env_get("tftpsrcp"); |
| if (ep != NULL) |
| tftp_our_port = simple_strtol(ep, NULL, 10); |
| #endif |
| tftp_cur_block = 0; |
| tftp_windowsize = 1; |
| tftp_last_nack = 0; |
| /* zero out server ether in case the server ip has changed */ |
| memset(net_server_ethaddr, 0, 6); |
| /* Revert tftp_block_size to dflt */ |
| tftp_block_size = TFTP_BLOCK_SIZE; |
| #ifdef CONFIG_TFTP_TSIZE |
| tftp_tsize = 0; |
| tftp_tsize_num_hash = 0; |
| #endif |
| |
| tftp_send(); |
| } |
| |
| #ifdef CONFIG_CMD_TFTPSRV |
| void tftp_start_server(void) |
| { |
| tftp_filename[0] = 0; |
| |
| if (tftp_init_load_addr()) { |
| eth_halt(); |
| net_set_state(NETLOOP_FAIL); |
| puts("\nTFTP error: trying to overwrite reserved memory...\n"); |
| return; |
| } |
| printf("Using %s device\n", eth_get_name()); |
| printf("Listening for TFTP transfer on %pI4\n", &net_ip); |
| printf("Load address: 0x%lx\n", tftp_load_addr); |
| |
| puts("Loading: *\b"); |
| |
| timeout_count_max = tftp_timeout_count_max; |
| timeout_count = 0; |
| timeout_ms = TIMEOUT; |
| net_set_timeout_handler(timeout_ms, tftp_timeout_handler); |
| |
| /* Revert tftp_block_size to dflt */ |
| tftp_block_size = TFTP_BLOCK_SIZE; |
| tftp_cur_block = 0; |
| tftp_our_port = WELL_KNOWN_PORT; |
| |
| #ifdef CONFIG_TFTP_TSIZE |
| tftp_tsize = 0; |
| tftp_tsize_num_hash = 0; |
| #endif |
| |
| tftp_state = STATE_RECV_WRQ; |
| net_set_udp_handler(tftp_handler); |
| |
| /* zero out server ether in case the server ip has changed */ |
| memset(net_server_ethaddr, 0, 6); |
| } |
| #endif /* CONFIG_CMD_TFTPSRV */ |
| |