| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2014 - 2015 Freescale Semiconductor, Inc. |
| * |
| * Driver for the Vitesse VSC9953 L2 Switch |
| */ |
| |
| #include <asm/io.h> |
| #include <asm/fsl_serdes.h> |
| #include <fm_eth.h> |
| #include <fsl_memac.h> |
| #include <bitfield.h> |
| #include <errno.h> |
| #include <malloc.h> |
| #include <vsc9953.h> |
| #include <ethsw.h> |
| |
| static struct vsc9953_info vsc9953_l2sw = { |
| .port[0] = VSC9953_PORT_INFO_INITIALIZER(0), |
| .port[1] = VSC9953_PORT_INFO_INITIALIZER(1), |
| .port[2] = VSC9953_PORT_INFO_INITIALIZER(2), |
| .port[3] = VSC9953_PORT_INFO_INITIALIZER(3), |
| .port[4] = VSC9953_PORT_INFO_INITIALIZER(4), |
| .port[5] = VSC9953_PORT_INFO_INITIALIZER(5), |
| .port[6] = VSC9953_PORT_INFO_INITIALIZER(6), |
| .port[7] = VSC9953_PORT_INFO_INITIALIZER(7), |
| .port[8] = VSC9953_PORT_INFO_INITIALIZER(8), |
| .port[9] = VSC9953_PORT_INFO_INITIALIZER(9), |
| }; |
| |
| void vsc9953_port_info_set_mdio(int port_no, struct mii_dev *bus) |
| { |
| if (!VSC9953_PORT_CHECK(port_no)) |
| return; |
| |
| vsc9953_l2sw.port[port_no].bus = bus; |
| } |
| |
| void vsc9953_port_info_set_phy_address(int port_no, int address) |
| { |
| if (!VSC9953_PORT_CHECK(port_no)) |
| return; |
| |
| vsc9953_l2sw.port[port_no].phyaddr = address; |
| } |
| |
| void vsc9953_port_info_set_phy_int(int port_no, phy_interface_t phy_int) |
| { |
| if (!VSC9953_PORT_CHECK(port_no)) |
| return; |
| |
| vsc9953_l2sw.port[port_no].enet_if = phy_int; |
| } |
| |
| void vsc9953_port_enable(int port_no) |
| { |
| if (!VSC9953_PORT_CHECK(port_no)) |
| return; |
| |
| vsc9953_l2sw.port[port_no].enabled = 1; |
| } |
| |
| void vsc9953_port_disable(int port_no) |
| { |
| if (!VSC9953_PORT_CHECK(port_no)) |
| return; |
| |
| vsc9953_l2sw.port[port_no].enabled = 0; |
| } |
| |
| static void vsc9953_mdio_write(struct vsc9953_mii_mng *phyregs, int port_addr, |
| int regnum, int value) |
| { |
| int timeout = 50000; |
| |
| out_le32(&phyregs->miimcmd, (0x1 << 31) | ((port_addr & 0x1f) << 25) | |
| ((regnum & 0x1f) << 20) | ((value & 0xffff) << 4) | |
| (0x1 << 1)); |
| asm("sync"); |
| |
| while ((in_le32(&phyregs->miimstatus) & 0x8) && --timeout) |
| udelay(1); |
| |
| if (timeout == 0) |
| debug("Timeout waiting for MDIO write\n"); |
| } |
| |
| static int vsc9953_mdio_read(struct vsc9953_mii_mng *phyregs, int port_addr, |
| int regnum) |
| { |
| int value = 0xFFFF; |
| int timeout = 50000; |
| |
| while ((in_le32(&phyregs->miimstatus) & MIIMIND_OPR_PEND) && --timeout) |
| udelay(1); |
| if (timeout == 0) { |
| debug("Timeout waiting for MDIO operation to finish\n"); |
| return value; |
| } |
| |
| /* Put the address of the phy, and the register |
| * number into MIICMD |
| */ |
| out_le32(&phyregs->miimcmd, (0x1 << 31) | ((port_addr & 0x1f) << 25) | |
| ((regnum & 0x1f) << 20) | ((value & 0xffff) << 4) | |
| (0x2 << 1)); |
| |
| timeout = 50000; |
| /* Wait for the the indication that the read is done */ |
| while ((in_le32(&phyregs->miimstatus) & 0x8) && --timeout) |
| udelay(1); |
| if (timeout == 0) |
| debug("Timeout waiting for MDIO read\n"); |
| |
| /* Grab the value read from the PHY */ |
| value = in_le32(&phyregs->miimdata); |
| |
| if ((value & 0x00030000) == 0) |
| return value & 0x0000ffff; |
| |
| return value; |
| } |
| |
| static int init_phy(struct eth_device *dev) |
| { |
| struct vsc9953_port_info *l2sw_port = dev->priv; |
| struct phy_device *phydev = NULL; |
| |
| #ifdef CONFIG_PHYLIB |
| if (!l2sw_port->bus) |
| return 0; |
| phydev = phy_connect(l2sw_port->bus, l2sw_port->phyaddr, dev, |
| l2sw_port->enet_if); |
| if (!phydev) { |
| printf("Failed to connect\n"); |
| return -1; |
| } |
| |
| phydev->supported &= SUPPORTED_10baseT_Half | |
| SUPPORTED_10baseT_Full | |
| SUPPORTED_100baseT_Half | |
| SUPPORTED_100baseT_Full | |
| SUPPORTED_1000baseT_Full; |
| phydev->advertising = phydev->supported; |
| |
| l2sw_port->phydev = phydev; |
| |
| phy_config(phydev); |
| #endif |
| |
| return 0; |
| } |
| |
| static int vsc9953_port_init(int port_no) |
| { |
| struct eth_device *dev; |
| |
| /* Internal ports never have a PHY */ |
| if (VSC9953_INTERNAL_PORT_CHECK(port_no)) |
| return 0; |
| |
| /* alloc eth device */ |
| dev = (struct eth_device *)calloc(1, sizeof(struct eth_device)); |
| if (!dev) |
| return -ENOMEM; |
| |
| sprintf(dev->name, "SW@PORT%d", port_no); |
| dev->priv = &vsc9953_l2sw.port[port_no]; |
| dev->init = NULL; |
| dev->halt = NULL; |
| dev->send = NULL; |
| dev->recv = NULL; |
| |
| if (init_phy(dev)) { |
| free(dev); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static int vsc9953_vlan_table_poll_idle(void) |
| { |
| struct vsc9953_analyzer *l2ana_reg; |
| int timeout; |
| |
| l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + |
| VSC9953_ANA_OFFSET); |
| |
| timeout = 50000; |
| while (((in_le32(&l2ana_reg->ana_tables.vlan_access) & |
| VSC9953_VLAN_CMD_MASK) != VSC9953_VLAN_CMD_IDLE) && --timeout) |
| udelay(1); |
| |
| return timeout ? 0 : -EBUSY; |
| } |
| |
| #ifdef CONFIG_CMD_ETHSW |
| /* Add/remove a port to/from a VLAN */ |
| static void vsc9953_vlan_table_membership_set(int vid, u32 port_no, u8 add) |
| { |
| u32 val; |
| struct vsc9953_analyzer *l2ana_reg; |
| |
| l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + |
| VSC9953_ANA_OFFSET); |
| |
| if (vsc9953_vlan_table_poll_idle() < 0) { |
| debug("VLAN table timeout\n"); |
| return; |
| } |
| |
| val = in_le32(&l2ana_reg->ana_tables.vlan_tidx); |
| val = bitfield_replace_by_mask(val, VSC9953_ANA_TBL_VID_MASK, vid); |
| out_le32(&l2ana_reg->ana_tables.vlan_tidx, val); |
| |
| clrsetbits_le32(&l2ana_reg->ana_tables.vlan_access, |
| VSC9953_VLAN_CMD_MASK, VSC9953_VLAN_CMD_READ); |
| |
| if (vsc9953_vlan_table_poll_idle() < 0) { |
| debug("VLAN table timeout\n"); |
| return; |
| } |
| |
| val = in_le32(&l2ana_reg->ana_tables.vlan_tidx); |
| val = bitfield_replace_by_mask(val, VSC9953_ANA_TBL_VID_MASK, vid); |
| out_le32(&l2ana_reg->ana_tables.vlan_tidx, val); |
| |
| val = in_le32(&l2ana_reg->ana_tables.vlan_access); |
| if (!add) { |
| val = bitfield_replace_by_mask(val, VSC9953_VLAN_CMD_MASK, |
| VSC9953_VLAN_CMD_WRITE) & |
| ~(bitfield_replace_by_mask(0, VSC9953_VLAN_PORT_MASK, |
| (1 << port_no))); |
| ; |
| } else { |
| val = bitfield_replace_by_mask(val, VSC9953_VLAN_CMD_MASK, |
| VSC9953_VLAN_CMD_WRITE) | |
| bitfield_replace_by_mask(0, VSC9953_VLAN_PORT_MASK, |
| (1 << port_no)); |
| } |
| out_le32(&l2ana_reg->ana_tables.vlan_access, val); |
| |
| /* wait for VLAN table command to flush */ |
| if (vsc9953_vlan_table_poll_idle() < 0) { |
| debug("VLAN table timeout\n"); |
| return; |
| } |
| } |
| |
| /* show VLAN membership for a port */ |
| static void vsc9953_vlan_membership_show(int port_no) |
| { |
| u32 val; |
| struct vsc9953_analyzer *l2ana_reg; |
| u32 vid; |
| |
| l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + |
| VSC9953_ANA_OFFSET); |
| |
| printf("Port %d VLAN membership: ", port_no); |
| |
| for (vid = 0; vid < VSC9953_MAX_VLAN; vid++) { |
| if (vsc9953_vlan_table_poll_idle() < 0) { |
| debug("VLAN table timeout\n"); |
| return; |
| } |
| |
| val = in_le32(&l2ana_reg->ana_tables.vlan_tidx); |
| val = bitfield_replace_by_mask(val, VSC9953_ANA_TBL_VID_MASK, |
| vid); |
| out_le32(&l2ana_reg->ana_tables.vlan_tidx, val); |
| |
| clrsetbits_le32(&l2ana_reg->ana_tables.vlan_access, |
| VSC9953_VLAN_CMD_MASK, VSC9953_VLAN_CMD_READ); |
| |
| if (vsc9953_vlan_table_poll_idle() < 0) { |
| debug("VLAN table timeout\n"); |
| return; |
| } |
| |
| val = in_le32(&l2ana_reg->ana_tables.vlan_access); |
| |
| if (bitfield_extract_by_mask(val, VSC9953_VLAN_PORT_MASK) & |
| (1 << port_no)) |
| printf("%d ", vid); |
| } |
| printf("\n"); |
| } |
| #endif |
| |
| /* vlan table set/clear all membership of vid */ |
| static void vsc9953_vlan_table_membership_all_set(int vid, int set_member) |
| { |
| uint val; |
| struct vsc9953_analyzer *l2ana_reg; |
| |
| l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + |
| VSC9953_ANA_OFFSET); |
| |
| if (vsc9953_vlan_table_poll_idle() < 0) { |
| debug("VLAN table timeout\n"); |
| return; |
| } |
| |
| /* read current vlan configuration */ |
| val = in_le32(&l2ana_reg->ana_tables.vlan_tidx); |
| out_le32(&l2ana_reg->ana_tables.vlan_tidx, |
| bitfield_replace_by_mask(val, VSC9953_ANA_TBL_VID_MASK, vid)); |
| |
| clrsetbits_le32(&l2ana_reg->ana_tables.vlan_access, |
| VSC9953_VLAN_CMD_MASK, VSC9953_VLAN_CMD_READ); |
| |
| if (vsc9953_vlan_table_poll_idle() < 0) { |
| debug("VLAN table timeout\n"); |
| return; |
| } |
| |
| val = in_le32(&l2ana_reg->ana_tables.vlan_tidx); |
| out_le32(&l2ana_reg->ana_tables.vlan_tidx, |
| bitfield_replace_by_mask(val, VSC9953_ANA_TBL_VID_MASK, vid)); |
| |
| clrsetbits_le32(&l2ana_reg->ana_tables.vlan_access, |
| VSC9953_VLAN_PORT_MASK | VSC9953_VLAN_CMD_MASK, |
| VSC9953_VLAN_CMD_WRITE | |
| (set_member ? VSC9953_VLAN_PORT_MASK : 0)); |
| } |
| |
| #ifdef CONFIG_CMD_ETHSW |
| /* Get PVID of a VSC9953 port */ |
| static int vsc9953_port_vlan_pvid_get(int port_nr, int *pvid) |
| { |
| u32 val; |
| struct vsc9953_analyzer *l2ana_reg; |
| |
| /* Administrative down */ |
| if (!vsc9953_l2sw.port[port_nr].enabled) { |
| printf("Port %d is administrative down\n", port_nr); |
| return -1; |
| } |
| |
| l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + |
| VSC9953_ANA_OFFSET); |
| |
| /* Get ingress PVID */ |
| val = in_le32(&l2ana_reg->port[port_nr].vlan_cfg); |
| *pvid = bitfield_extract_by_mask(val, VSC9953_VLAN_CFG_VID_MASK); |
| |
| return 0; |
| } |
| #endif |
| |
| /* Set PVID for a VSC9953 port */ |
| static void vsc9953_port_vlan_pvid_set(int port_no, int pvid) |
| { |
| uint val; |
| struct vsc9953_analyzer *l2ana_reg; |
| struct vsc9953_rew_reg *l2rew_reg; |
| |
| /* Administrative down */ |
| if (!vsc9953_l2sw.port[port_no].enabled) { |
| printf("Port %d is administrative down\n", port_no); |
| return; |
| } |
| |
| l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + |
| VSC9953_ANA_OFFSET); |
| l2rew_reg = (struct vsc9953_rew_reg *)(VSC9953_OFFSET + |
| VSC9953_REW_OFFSET); |
| |
| /* Set PVID on ingress */ |
| val = in_le32(&l2ana_reg->port[port_no].vlan_cfg); |
| val = bitfield_replace_by_mask(val, VSC9953_VLAN_CFG_VID_MASK, pvid); |
| out_le32(&l2ana_reg->port[port_no].vlan_cfg, val); |
| |
| /* Set PVID on egress */ |
| val = in_le32(&l2rew_reg->port[port_no].port_vlan_cfg); |
| val = bitfield_replace_by_mask(val, VSC9953_PORT_VLAN_CFG_VID_MASK, |
| pvid); |
| out_le32(&l2rew_reg->port[port_no].port_vlan_cfg, val); |
| } |
| |
| static void vsc9953_port_all_vlan_pvid_set(int pvid) |
| { |
| int i; |
| |
| for (i = 0; i < VSC9953_MAX_PORTS; i++) |
| vsc9953_port_vlan_pvid_set(i, pvid); |
| } |
| |
| /* Enable/disable vlan aware of a VSC9953 port */ |
| static void vsc9953_port_vlan_aware_set(int port_no, int enabled) |
| { |
| struct vsc9953_analyzer *l2ana_reg; |
| |
| /* Administrative down */ |
| if (!vsc9953_l2sw.port[port_no].enabled) { |
| printf("Port %d is administrative down\n", port_no); |
| return; |
| } |
| |
| l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + |
| VSC9953_ANA_OFFSET); |
| |
| if (enabled) |
| setbits_le32(&l2ana_reg->port[port_no].vlan_cfg, |
| VSC9953_VLAN_CFG_AWARE_ENA); |
| else |
| clrbits_le32(&l2ana_reg->port[port_no].vlan_cfg, |
| VSC9953_VLAN_CFG_AWARE_ENA); |
| } |
| |
| /* Set all VSC9953 ports' vlan aware */ |
| static void vsc9953_port_all_vlan_aware_set(int enabled) |
| { |
| int i; |
| |
| for (i = 0; i < VSC9953_MAX_PORTS; i++) |
| vsc9953_port_vlan_aware_set(i, enabled); |
| } |
| |
| /* Enable/disable vlan pop count of a VSC9953 port */ |
| static void vsc9953_port_vlan_popcnt_set(int port_no, int popcnt) |
| { |
| uint val; |
| struct vsc9953_analyzer *l2ana_reg; |
| |
| /* Administrative down */ |
| if (!vsc9953_l2sw.port[port_no].enabled) { |
| printf("Port %d is administrative down\n", port_no); |
| return; |
| } |
| |
| if (popcnt > 3 || popcnt < 0) { |
| printf("Invalid pop count value: %d\n", port_no); |
| return; |
| } |
| |
| l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + |
| VSC9953_ANA_OFFSET); |
| |
| val = in_le32(&l2ana_reg->port[port_no].vlan_cfg); |
| val = bitfield_replace_by_mask(val, VSC9953_VLAN_CFG_POP_CNT_MASK, |
| popcnt); |
| out_le32(&l2ana_reg->port[port_no].vlan_cfg, val); |
| } |
| |
| /* Set all VSC9953 ports' pop count */ |
| static void vsc9953_port_all_vlan_poncnt_set(int popcnt) |
| { |
| int i; |
| |
| for (i = 0; i < VSC9953_MAX_PORTS; i++) |
| vsc9953_port_vlan_popcnt_set(i, popcnt); |
| } |
| |
| /* Enable/disable learning for frames dropped due to ingress filtering */ |
| static void vsc9953_vlan_ingr_fltr_learn_drop(int enable) |
| { |
| struct vsc9953_analyzer *l2ana_reg; |
| |
| l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + |
| VSC9953_ANA_OFFSET); |
| |
| if (enable) |
| setbits_le32(&l2ana_reg->ana.adv_learn, VSC9953_VLAN_CHK); |
| else |
| clrbits_le32(&l2ana_reg->ana.adv_learn, VSC9953_VLAN_CHK); |
| } |
| |
| enum aggr_code_mode { |
| AGGR_CODE_RAND = 0, |
| AGGR_CODE_ALL, /* S/D MAC, IPv4 S/D IP, IPv6 Flow Label, S/D PORT */ |
| }; |
| |
| /* Set aggregation code generation mode */ |
| static int vsc9953_aggr_code_set(enum aggr_code_mode ac) |
| { |
| int rc; |
| struct vsc9953_analyzer *l2ana_reg; |
| |
| l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + |
| VSC9953_ANA_OFFSET); |
| |
| switch (ac) { |
| case AGGR_CODE_RAND: |
| clrsetbits_le32(&l2ana_reg->common.aggr_cfg, |
| VSC9953_AC_DMAC_ENA | VSC9953_AC_SMAC_ENA | |
| VSC9953_AC_IP6_LBL_ENA | |
| VSC9953_AC_IP6_TCPUDP_ENA | |
| VSC9953_AC_IP4_SIPDIP_ENA | |
| VSC9953_AC_IP4_TCPUDP_ENA, VSC9953_AC_RND_ENA); |
| rc = 0; |
| break; |
| case AGGR_CODE_ALL: |
| clrsetbits_le32(&l2ana_reg->common.aggr_cfg, VSC9953_AC_RND_ENA, |
| VSC9953_AC_DMAC_ENA | VSC9953_AC_SMAC_ENA | |
| VSC9953_AC_IP6_LBL_ENA | |
| VSC9953_AC_IP6_TCPUDP_ENA | |
| VSC9953_AC_IP4_SIPDIP_ENA | |
| VSC9953_AC_IP4_TCPUDP_ENA); |
| rc = 0; |
| break; |
| default: |
| /* unknown mode for aggregation code */ |
| rc = -EINVAL; |
| } |
| |
| return rc; |
| } |
| |
| /* Egress untag modes of a VSC9953 port */ |
| enum egress_untag_mode { |
| EGRESS_UNTAG_ALL = 0, |
| EGRESS_UNTAG_PVID_AND_ZERO, |
| EGRESS_UNTAG_ZERO, |
| EGRESS_UNTAG_NONE, |
| }; |
| |
| #ifdef CONFIG_CMD_ETHSW |
| /* Get egress tagging configuration for a VSC9953 port */ |
| static int vsc9953_port_vlan_egr_untag_get(int port_no, |
| enum egress_untag_mode *mode) |
| { |
| u32 val; |
| struct vsc9953_rew_reg *l2rew_reg; |
| |
| /* Administrative down */ |
| if (!vsc9953_l2sw.port[port_no].enabled) { |
| printf("Port %d is administrative down\n", port_no); |
| return -1; |
| } |
| |
| l2rew_reg = (struct vsc9953_rew_reg *)(VSC9953_OFFSET + |
| VSC9953_REW_OFFSET); |
| |
| val = in_le32(&l2rew_reg->port[port_no].port_tag_cfg); |
| |
| switch (val & VSC9953_TAG_CFG_MASK) { |
| case VSC9953_TAG_CFG_NONE: |
| *mode = EGRESS_UNTAG_ALL; |
| return 0; |
| case VSC9953_TAG_CFG_ALL_BUT_PVID_ZERO: |
| *mode = EGRESS_UNTAG_PVID_AND_ZERO; |
| return 0; |
| case VSC9953_TAG_CFG_ALL_BUT_ZERO: |
| *mode = EGRESS_UNTAG_ZERO; |
| return 0; |
| case VSC9953_TAG_CFG_ALL: |
| *mode = EGRESS_UNTAG_NONE; |
| return 0; |
| default: |
| printf("Unknown egress tagging configuration for port %d\n", |
| port_no); |
| return -1; |
| } |
| } |
| |
| /* Show egress tagging configuration for a VSC9953 port */ |
| static void vsc9953_port_vlan_egr_untag_show(int port_no) |
| { |
| enum egress_untag_mode mode; |
| |
| if (vsc9953_port_vlan_egr_untag_get(port_no, &mode)) { |
| printf("%7d\t%17s\n", port_no, "-"); |
| return; |
| } |
| |
| printf("%7d\t", port_no); |
| switch (mode) { |
| case EGRESS_UNTAG_ALL: |
| printf("%17s\n", "all"); |
| break; |
| case EGRESS_UNTAG_NONE: |
| printf("%17s\n", "none"); |
| break; |
| case EGRESS_UNTAG_PVID_AND_ZERO: |
| printf("%17s\n", "PVID and 0"); |
| break; |
| case EGRESS_UNTAG_ZERO: |
| printf("%17s\n", "0"); |
| break; |
| default: |
| printf("%17s\n", "-"); |
| } |
| } |
| #endif |
| |
| static void vsc9953_port_vlan_egr_untag_set(int port_no, |
| enum egress_untag_mode mode) |
| { |
| struct vsc9953_rew_reg *l2rew_reg; |
| |
| /* Administrative down */ |
| if (!vsc9953_l2sw.port[port_no].enabled) { |
| printf("Port %d is administrative down\n", port_no); |
| return; |
| } |
| |
| l2rew_reg = (struct vsc9953_rew_reg *)(VSC9953_OFFSET + |
| VSC9953_REW_OFFSET); |
| |
| switch (mode) { |
| case EGRESS_UNTAG_ALL: |
| clrsetbits_le32(&l2rew_reg->port[port_no].port_tag_cfg, |
| VSC9953_TAG_CFG_MASK, VSC9953_TAG_CFG_NONE); |
| break; |
| case EGRESS_UNTAG_PVID_AND_ZERO: |
| clrsetbits_le32(&l2rew_reg->port[port_no].port_tag_cfg, |
| VSC9953_TAG_CFG_MASK, |
| VSC9953_TAG_CFG_ALL_BUT_PVID_ZERO); |
| break; |
| case EGRESS_UNTAG_ZERO: |
| clrsetbits_le32(&l2rew_reg->port[port_no].port_tag_cfg, |
| VSC9953_TAG_CFG_MASK, |
| VSC9953_TAG_CFG_ALL_BUT_ZERO); |
| break; |
| case EGRESS_UNTAG_NONE: |
| clrsetbits_le32(&l2rew_reg->port[port_no].port_tag_cfg, |
| VSC9953_TAG_CFG_MASK, VSC9953_TAG_CFG_ALL); |
| break; |
| default: |
| printf("Unknown untag mode for port %d\n", port_no); |
| } |
| } |
| |
| static void vsc9953_port_all_vlan_egress_untagged_set( |
| enum egress_untag_mode mode) |
| { |
| int i; |
| |
| for (i = 0; i < VSC9953_MAX_PORTS; i++) |
| vsc9953_port_vlan_egr_untag_set(i, mode); |
| } |
| |
| static int vsc9953_autoage_time_set(int age_period) |
| { |
| u32 autoage; |
| struct vsc9953_analyzer *l2ana_reg; |
| |
| l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + |
| VSC9953_ANA_OFFSET); |
| |
| if (age_period < 0 || age_period > VSC9953_AUTOAGE_PERIOD_MASK) |
| return -EINVAL; |
| |
| autoage = bitfield_replace_by_mask(in_le32(&l2ana_reg->ana.auto_age), |
| VSC9953_AUTOAGE_PERIOD_MASK, |
| age_period); |
| out_le32(&l2ana_reg->ana.auto_age, autoage); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_CMD_ETHSW |
| |
| /* Enable/disable status of a VSC9953 port */ |
| static void vsc9953_port_status_set(int port_no, u8 enabled) |
| { |
| struct vsc9953_qsys_reg *l2qsys_reg; |
| |
| /* Administrative down */ |
| if (!vsc9953_l2sw.port[port_no].enabled) |
| return; |
| |
| l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET + |
| VSC9953_QSYS_OFFSET); |
| |
| if (enabled) |
| setbits_le32(&l2qsys_reg->sys.switch_port_mode[port_no], |
| VSC9953_PORT_ENA); |
| else |
| clrbits_le32(&l2qsys_reg->sys.switch_port_mode[port_no], |
| VSC9953_PORT_ENA); |
| } |
| |
| /* Start autonegotiation for a VSC9953 PHY */ |
| static void vsc9953_phy_autoneg(int port_no) |
| { |
| if (!vsc9953_l2sw.port[port_no].phydev) |
| return; |
| |
| if (vsc9953_l2sw.port[port_no].phydev->drv->startup( |
| vsc9953_l2sw.port[port_no].phydev)) |
| printf("Failed to start PHY for port %d\n", port_no); |
| } |
| |
| /* Print a VSC9953 port's configuration */ |
| static void vsc9953_port_config_show(int port_no) |
| { |
| int speed; |
| int duplex; |
| int link; |
| u8 enabled; |
| u32 val; |
| struct vsc9953_qsys_reg *l2qsys_reg; |
| |
| l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET + |
| VSC9953_QSYS_OFFSET); |
| |
| val = in_le32(&l2qsys_reg->sys.switch_port_mode[port_no]); |
| enabled = vsc9953_l2sw.port[port_no].enabled && |
| (val & VSC9953_PORT_ENA); |
| |
| /* internal ports (8 and 9) are fixed */ |
| if (VSC9953_INTERNAL_PORT_CHECK(port_no)) { |
| link = 1; |
| speed = SPEED_2500; |
| duplex = DUPLEX_FULL; |
| } else { |
| if (vsc9953_l2sw.port[port_no].phydev) { |
| link = vsc9953_l2sw.port[port_no].phydev->link; |
| speed = vsc9953_l2sw.port[port_no].phydev->speed; |
| duplex = vsc9953_l2sw.port[port_no].phydev->duplex; |
| } else { |
| link = -1; |
| speed = -1; |
| duplex = -1; |
| } |
| } |
| |
| printf("%8d ", port_no); |
| printf("%8s ", enabled == 1 ? "enabled" : "disabled"); |
| printf("%8s ", link == 1 ? "up" : "down"); |
| |
| switch (speed) { |
| case SPEED_10: |
| printf("%8d ", 10); |
| break; |
| case SPEED_100: |
| printf("%8d ", 100); |
| break; |
| case SPEED_1000: |
| printf("%8d ", 1000); |
| break; |
| case SPEED_2500: |
| printf("%8d ", 2500); |
| break; |
| case SPEED_10000: |
| printf("%8d ", 10000); |
| break; |
| default: |
| printf("%8s ", "-"); |
| } |
| |
| printf("%8s\n", duplex == DUPLEX_FULL ? "full" : "half"); |
| } |
| |
| /* Show VSC9953 ports' statistics */ |
| static void vsc9953_port_statistics_show(int port_no) |
| { |
| u32 rx_val; |
| u32 tx_val; |
| struct vsc9953_system_reg *l2sys_reg; |
| |
| /* Administrative down */ |
| if (!vsc9953_l2sw.port[port_no].enabled) { |
| printf("Port %d is administrative down\n", port_no); |
| return; |
| } |
| |
| l2sys_reg = (struct vsc9953_system_reg *)(VSC9953_OFFSET + |
| VSC9953_SYS_OFFSET); |
| |
| printf("Statistics for L2 Switch port %d:\n", port_no); |
| |
| /* Set counter view for our port */ |
| out_le32(&l2sys_reg->sys.stat_cfg, port_no); |
| |
| #define VSC9953_STATS_PRINTF "%-15s %10u" |
| |
| /* Get number of Rx and Tx frames */ |
| rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_short) + |
| in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_frag) + |
| in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_jabber) + |
| in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_long) + |
| in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_64) + |
| in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_65_127) + |
| in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_128_255) + |
| in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_256_511) + |
| in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_512_1023) + |
| in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_1024_1526) + |
| in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_jumbo); |
| tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_64) + |
| in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_65_127) + |
| in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_128_255) + |
| in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_256_511) + |
| in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_512_1023) + |
| in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_1024_1526) + |
| in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_jumbo); |
| printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", |
| "Rx frames:", rx_val, "Tx frames:", tx_val); |
| |
| /* Get number of Rx and Tx bytes */ |
| rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_oct); |
| tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_oct); |
| printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", |
| "Rx bytes:", rx_val, "Tx bytes:", tx_val); |
| |
| /* Get number of Rx frames received ok and Tx frames sent ok */ |
| rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_yellow_prio_0) + |
| in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_yellow_prio_1) + |
| in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_yellow_prio_2) + |
| in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_yellow_prio_3) + |
| in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_yellow_prio_4) + |
| in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_yellow_prio_5) + |
| in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_yellow_prio_6) + |
| in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_yellow_prio_7) + |
| in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_green_prio_0) + |
| in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_green_prio_1) + |
| in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_green_prio_2) + |
| in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_green_prio_3) + |
| in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_green_prio_4) + |
| in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_green_prio_5) + |
| in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_green_prio_6) + |
| in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_green_prio_7); |
| tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_64) + |
| in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_65_127) + |
| in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_128_255) + |
| in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_256_511) + |
| in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_512_1023) + |
| in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_1024_1526) + |
| in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_jumbo); |
| printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", |
| "Rx frames ok:", rx_val, "Tx frames ok:", tx_val); |
| |
| /* Get number of Rx and Tx unicast frames */ |
| rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_uc); |
| tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_uc); |
| printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", |
| "Rx unicast:", rx_val, "Tx unicast:", tx_val); |
| |
| /* Get number of Rx and Tx broadcast frames */ |
| rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_bc); |
| tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_bc); |
| printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", |
| "Rx broadcast:", rx_val, "Tx broadcast:", tx_val); |
| |
| /* Get number of Rx and Tx frames of 64B */ |
| rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_64); |
| tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_64); |
| printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", |
| "Rx 64B:", rx_val, "Tx 64B:", tx_val); |
| |
| /* Get number of Rx and Tx frames with sizes between 65B and 127B */ |
| rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_65_127); |
| tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_65_127); |
| printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", |
| "Rx 65B-127B:", rx_val, "Tx 65B-127B:", tx_val); |
| |
| /* Get number of Rx and Tx frames with sizes between 128B and 255B */ |
| rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_128_255); |
| tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_128_255); |
| printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", |
| "Rx 128B-255B:", rx_val, "Tx 128B-255B:", tx_val); |
| |
| /* Get number of Rx and Tx frames with sizes between 256B and 511B */ |
| rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_256_511); |
| tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_256_511); |
| printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", |
| "Rx 256B-511B:", rx_val, "Tx 256B-511B:", tx_val); |
| |
| /* Get number of Rx and Tx frames with sizes between 512B and 1023B */ |
| rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_512_1023); |
| tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_512_1023); |
| printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", |
| "Rx 512B-1023B:", rx_val, "Tx 512B-1023B:", tx_val); |
| |
| /* Get number of Rx and Tx frames with sizes between 1024B and 1526B */ |
| rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_1024_1526); |
| tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_1024_1526); |
| printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", |
| "Rx 1024B-1526B:", rx_val, "Tx 1024B-1526B:", tx_val); |
| |
| /* Get number of Rx and Tx jumbo frames */ |
| rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_sz_jumbo); |
| tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_sz_jumbo); |
| printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", |
| "Rx jumbo:", rx_val, "Tx jumbo:", tx_val); |
| |
| /* Get number of Rx and Tx dropped frames */ |
| rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_cat_drop) + |
| in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_tail) + |
| in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_yellow_prio_0) + |
| in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_yellow_prio_1) + |
| in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_yellow_prio_2) + |
| in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_yellow_prio_3) + |
| in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_yellow_prio_4) + |
| in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_yellow_prio_5) + |
| in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_yellow_prio_6) + |
| in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_yellow_prio_7) + |
| in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_green_prio_0) + |
| in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_green_prio_1) + |
| in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_green_prio_2) + |
| in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_green_prio_3) + |
| in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_green_prio_4) + |
| in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_green_prio_5) + |
| in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_green_prio_6) + |
| in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_green_prio_7); |
| tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_drop) + |
| in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_aged); |
| printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", |
| "Rx drops:", rx_val, "Tx drops:", tx_val); |
| |
| /* |
| * Get number of Rx frames with CRC or alignment errors |
| * and number of detected Tx collisions |
| */ |
| rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_crc); |
| tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_col); |
| printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", |
| "Rx CRC&align:", rx_val, "Tx coll:", tx_val); |
| |
| /* |
| * Get number of Rx undersized frames and |
| * number of Tx aged frames |
| */ |
| rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_short); |
| tx_val = in_le32(&l2sys_reg->stat.tx_cntrs.c_tx_aged); |
| printf(VSC9953_STATS_PRINTF"\t\t"VSC9953_STATS_PRINTF"\n", |
| "Rx undersize:", rx_val, "Tx aged:", tx_val); |
| |
| /* Get number of Rx oversized frames */ |
| rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_long); |
| printf(VSC9953_STATS_PRINTF"\n", "Rx oversized:", rx_val); |
| |
| /* Get number of Rx fragmented frames */ |
| rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_frag); |
| printf(VSC9953_STATS_PRINTF"\n", "Rx fragments:", rx_val); |
| |
| /* Get number of Rx jabber errors */ |
| rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_jabber); |
| printf(VSC9953_STATS_PRINTF"\n", "Rx jabbers:", rx_val); |
| |
| /* |
| * Get number of Rx frames filtered due to classification rules or |
| * no destination ports |
| */ |
| rx_val = in_le32(&l2sys_reg->stat.rx_cntrs.c_rx_cat_drop) + |
| in_le32(&l2sys_reg->stat.drop_cntrs.c_dr_local); |
| printf(VSC9953_STATS_PRINTF"\n", "Rx filtered:", rx_val); |
| |
| printf("\n"); |
| } |
| |
| /* Clear statistics for a VSC9953 port */ |
| static void vsc9953_port_statistics_clear(int port_no) |
| { |
| struct vsc9953_system_reg *l2sys_reg; |
| |
| /* Administrative down */ |
| if (!vsc9953_l2sw.port[port_no].enabled) { |
| printf("Port %d is administrative down\n", port_no); |
| return; |
| } |
| |
| l2sys_reg = (struct vsc9953_system_reg *)(VSC9953_OFFSET + |
| VSC9953_SYS_OFFSET); |
| |
| /* Clear all counter groups for our ports */ |
| out_le32(&l2sys_reg->sys.stat_cfg, port_no | |
| VSC9953_STAT_CLEAR_RX | VSC9953_STAT_CLEAR_TX | |
| VSC9953_STAT_CLEAR_DR); |
| } |
| |
| enum port_learn_mode { |
| PORT_LEARN_NONE, |
| PORT_LEARN_AUTO |
| }; |
| |
| /* Set learning configuration for a VSC9953 port */ |
| static void vsc9953_port_learn_mode_set(int port_no, enum port_learn_mode mode) |
| { |
| struct vsc9953_analyzer *l2ana_reg; |
| |
| /* Administrative down */ |
| if (!vsc9953_l2sw.port[port_no].enabled) { |
| printf("Port %d is administrative down\n", port_no); |
| return; |
| } |
| |
| l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + |
| VSC9953_ANA_OFFSET); |
| |
| switch (mode) { |
| case PORT_LEARN_NONE: |
| clrbits_le32(&l2ana_reg->port[port_no].port_cfg, |
| VSC9953_PORT_CFG_LEARN_DROP | |
| VSC9953_PORT_CFG_LEARN_CPU | |
| VSC9953_PORT_CFG_LEARN_AUTO | |
| VSC9953_PORT_CFG_LEARN_ENA); |
| break; |
| case PORT_LEARN_AUTO: |
| clrsetbits_le32(&l2ana_reg->port[port_no].port_cfg, |
| VSC9953_PORT_CFG_LEARN_DROP | |
| VSC9953_PORT_CFG_LEARN_CPU, |
| VSC9953_PORT_CFG_LEARN_ENA | |
| VSC9953_PORT_CFG_LEARN_AUTO); |
| break; |
| default: |
| printf("Unknown learn mode for port %d\n", port_no); |
| } |
| } |
| |
| /* Get learning configuration for a VSC9953 port */ |
| static int vsc9953_port_learn_mode_get(int port_no, enum port_learn_mode *mode) |
| { |
| u32 val; |
| struct vsc9953_analyzer *l2ana_reg; |
| |
| /* Administrative down */ |
| if (!vsc9953_l2sw.port[port_no].enabled) { |
| printf("Port %d is administrative down\n", port_no); |
| return -1; |
| } |
| |
| l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + |
| VSC9953_ANA_OFFSET); |
| |
| /* For now we only support HW learning (auto) and no learning */ |
| val = in_le32(&l2ana_reg->port[port_no].port_cfg); |
| if ((val & (VSC9953_PORT_CFG_LEARN_ENA | |
| VSC9953_PORT_CFG_LEARN_AUTO)) == |
| (VSC9953_PORT_CFG_LEARN_ENA | VSC9953_PORT_CFG_LEARN_AUTO)) |
| *mode = PORT_LEARN_AUTO; |
| else |
| *mode = PORT_LEARN_NONE; |
| |
| return 0; |
| } |
| |
| /* wait for FDB to become available */ |
| static int vsc9953_mac_table_poll_idle(void) |
| { |
| struct vsc9953_analyzer *l2ana_reg; |
| u32 timeout; |
| |
| l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + |
| VSC9953_ANA_OFFSET); |
| |
| timeout = 50000; |
| while (((in_le32(&l2ana_reg->ana_tables.mac_access) & |
| VSC9953_MAC_CMD_MASK) != |
| VSC9953_MAC_CMD_IDLE) && --timeout) |
| udelay(1); |
| |
| return timeout ? 0 : -EBUSY; |
| } |
| |
| /* enum describing available commands for the MAC table */ |
| enum mac_table_cmd { |
| MAC_TABLE_READ, |
| MAC_TABLE_LOOKUP, |
| MAC_TABLE_WRITE, |
| MAC_TABLE_LEARN, |
| MAC_TABLE_FORGET, |
| MAC_TABLE_GET_NEXT, |
| MAC_TABLE_AGE, |
| }; |
| |
| /* Issues a command to the FDB table */ |
| static int vsc9953_mac_table_cmd(enum mac_table_cmd cmd) |
| { |
| struct vsc9953_analyzer *l2ana_reg; |
| |
| l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + |
| VSC9953_ANA_OFFSET); |
| |
| switch (cmd) { |
| case MAC_TABLE_READ: |
| clrsetbits_le32(&l2ana_reg->ana_tables.mac_access, |
| VSC9953_MAC_CMD_MASK | VSC9953_MAC_CMD_VALID, |
| VSC9953_MAC_CMD_READ); |
| break; |
| case MAC_TABLE_LOOKUP: |
| clrsetbits_le32(&l2ana_reg->ana_tables.mac_access, |
| VSC9953_MAC_CMD_MASK, VSC9953_MAC_CMD_READ | |
| VSC9953_MAC_CMD_VALID); |
| break; |
| case MAC_TABLE_WRITE: |
| clrsetbits_le32(&l2ana_reg->ana_tables.mac_access, |
| VSC9953_MAC_CMD_MASK | |
| VSC9953_MAC_ENTRYTYPE_MASK, |
| VSC9953_MAC_CMD_WRITE | |
| VSC9953_MAC_ENTRYTYPE_LOCKED); |
| break; |
| case MAC_TABLE_LEARN: |
| clrsetbits_le32(&l2ana_reg->ana_tables.mac_access, |
| VSC9953_MAC_CMD_MASK | |
| VSC9953_MAC_ENTRYTYPE_MASK, |
| VSC9953_MAC_CMD_LEARN | |
| VSC9953_MAC_ENTRYTYPE_LOCKED | |
| VSC9953_MAC_CMD_VALID); |
| break; |
| case MAC_TABLE_FORGET: |
| clrsetbits_le32(&l2ana_reg->ana_tables.mac_access, |
| VSC9953_MAC_CMD_MASK | |
| VSC9953_MAC_ENTRYTYPE_MASK, |
| VSC9953_MAC_CMD_FORGET); |
| break; |
| case MAC_TABLE_GET_NEXT: |
| clrsetbits_le32(&l2ana_reg->ana_tables.mac_access, |
| VSC9953_MAC_CMD_MASK | |
| VSC9953_MAC_ENTRYTYPE_MASK, |
| VSC9953_MAC_CMD_NEXT); |
| break; |
| case MAC_TABLE_AGE: |
| clrsetbits_le32(&l2ana_reg->ana_tables.mac_access, |
| VSC9953_MAC_CMD_MASK | |
| VSC9953_MAC_ENTRYTYPE_MASK, |
| VSC9953_MAC_CMD_AGE); |
| break; |
| default: |
| printf("Unknown MAC table command\n"); |
| } |
| |
| if (vsc9953_mac_table_poll_idle() < 0) { |
| debug("MAC table timeout\n"); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /* show the FDB entries that correspond to a port and a VLAN */ |
| static void vsc9953_mac_table_show(int port_no, int vid) |
| { |
| int rc[VSC9953_MAX_PORTS]; |
| enum port_learn_mode mode[VSC9953_MAX_PORTS]; |
| int i; |
| u32 val; |
| u32 vlan; |
| u32 mach; |
| u32 macl; |
| u32 dest_indx; |
| struct vsc9953_analyzer *l2ana_reg; |
| |
| l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + |
| VSC9953_ANA_OFFSET); |
| |
| /* disable auto learning */ |
| if (port_no == ETHSW_CMD_PORT_ALL) { |
| for (i = 0; i < VSC9953_MAX_PORTS; i++) { |
| rc[i] = vsc9953_port_learn_mode_get(i, &mode[i]); |
| if (!rc[i] && mode[i] != PORT_LEARN_NONE) |
| vsc9953_port_learn_mode_set(i, PORT_LEARN_NONE); |
| } |
| } else { |
| rc[port_no] = vsc9953_port_learn_mode_get(port_no, |
| &mode[port_no]); |
| if (!rc[port_no] && mode[port_no] != PORT_LEARN_NONE) |
| vsc9953_port_learn_mode_set(port_no, PORT_LEARN_NONE); |
| } |
| |
| /* write port and vid to get selected FDB entries */ |
| val = in_le32(&l2ana_reg->ana.anag_efil); |
| if (port_no != ETHSW_CMD_PORT_ALL) { |
| val = bitfield_replace_by_mask(val, VSC9953_AGE_PORT_MASK, |
| port_no) | VSC9953_AGE_PORT_EN; |
| } |
| if (vid != ETHSW_CMD_VLAN_ALL) { |
| val = bitfield_replace_by_mask(val, VSC9953_AGE_VID_MASK, |
| vid) | VSC9953_AGE_VID_EN; |
| } |
| out_le32(&l2ana_reg->ana.anag_efil, val); |
| |
| /* set MAC and VLAN to 0 to look from beginning */ |
| clrbits_le32(&l2ana_reg->ana_tables.mach_data, |
| VSC9953_MAC_VID_MASK | VSC9953_MAC_MACH_MASK); |
| out_le32(&l2ana_reg->ana_tables.macl_data, 0); |
| |
| /* get entries */ |
| printf("%10s %17s %5s %4s\n", "EntryType", "MAC", "PORT", "VID"); |
| do { |
| if (vsc9953_mac_table_cmd(MAC_TABLE_GET_NEXT) < 0) { |
| debug("GET NEXT MAC table command failed\n"); |
| break; |
| } |
| |
| val = in_le32(&l2ana_reg->ana_tables.mac_access); |
| |
| /* get out when an invalid entry is found */ |
| if (!(val & VSC9953_MAC_CMD_VALID)) |
| break; |
| |
| switch (val & VSC9953_MAC_ENTRYTYPE_MASK) { |
| case VSC9953_MAC_ENTRYTYPE_NORMAL: |
| printf("%10s ", "Dynamic"); |
| break; |
| case VSC9953_MAC_ENTRYTYPE_LOCKED: |
| printf("%10s ", "Static"); |
| break; |
| case VSC9953_MAC_ENTRYTYPE_IPV4MCAST: |
| printf("%10s ", "IPv4 Mcast"); |
| break; |
| case VSC9953_MAC_ENTRYTYPE_IPV6MCAST: |
| printf("%10s ", "IPv6 Mcast"); |
| break; |
| default: |
| printf("%10s ", "Unknown"); |
| } |
| |
| dest_indx = bitfield_extract_by_mask(val, |
| VSC9953_MAC_DESTIDX_MASK); |
| |
| val = in_le32(&l2ana_reg->ana_tables.mach_data); |
| vlan = bitfield_extract_by_mask(val, VSC9953_MAC_VID_MASK); |
| mach = bitfield_extract_by_mask(val, VSC9953_MAC_MACH_MASK); |
| macl = in_le32(&l2ana_reg->ana_tables.macl_data); |
| |
| printf("%02x:%02x:%02x:%02x:%02x:%02x ", (mach >> 8) & 0xff, |
| mach & 0xff, (macl >> 24) & 0xff, (macl >> 16) & 0xff, |
| (macl >> 8) & 0xff, macl & 0xff); |
| printf("%5d ", dest_indx); |
| printf("%4d\n", vlan); |
| } while (1); |
| |
| /* set learning mode to previous value */ |
| if (port_no == ETHSW_CMD_PORT_ALL) { |
| for (i = 0; i < VSC9953_MAX_PORTS; i++) { |
| if (!rc[i] && mode[i] != PORT_LEARN_NONE) |
| vsc9953_port_learn_mode_set(i, mode[i]); |
| } |
| } else { |
| /* If administrative down, skip */ |
| if (!rc[port_no] && mode[port_no] != PORT_LEARN_NONE) |
| vsc9953_port_learn_mode_set(port_no, mode[port_no]); |
| } |
| |
| /* reset FDB port and VLAN FDB selection */ |
| clrbits_le32(&l2ana_reg->ana.anag_efil, VSC9953_AGE_PORT_EN | |
| VSC9953_AGE_PORT_MASK | VSC9953_AGE_VID_EN | |
| VSC9953_AGE_VID_MASK); |
| } |
| |
| /* Add a static FDB entry */ |
| static int vsc9953_mac_table_add(u8 port_no, uchar mac[6], int vid) |
| { |
| u32 val; |
| struct vsc9953_analyzer *l2ana_reg; |
| |
| l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + |
| VSC9953_ANA_OFFSET); |
| |
| val = in_le32(&l2ana_reg->ana_tables.mach_data); |
| val = bitfield_replace_by_mask(val, VSC9953_MACHDATA_VID_MASK, vid) | |
| (mac[0] << 8) | (mac[1] << 0); |
| out_le32(&l2ana_reg->ana_tables.mach_data, val); |
| |
| out_le32(&l2ana_reg->ana_tables.macl_data, |
| (mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | |
| (mac[5] << 0)); |
| |
| /* set on which port is the MAC address added */ |
| val = in_le32(&l2ana_reg->ana_tables.mac_access); |
| val = bitfield_replace_by_mask(val, VSC9953_MAC_DESTIDX_MASK, port_no); |
| out_le32(&l2ana_reg->ana_tables.mac_access, val); |
| |
| if (vsc9953_mac_table_cmd(MAC_TABLE_LEARN) < 0) |
| return -1; |
| |
| /* check if the MAC address was indeed added */ |
| val = in_le32(&l2ana_reg->ana_tables.mach_data); |
| val = bitfield_replace_by_mask(val, VSC9953_MACHDATA_VID_MASK, vid) | |
| (mac[0] << 8) | (mac[1] << 0); |
| out_le32(&l2ana_reg->ana_tables.mach_data, val); |
| |
| out_le32(&l2ana_reg->ana_tables.macl_data, |
| (mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | |
| (mac[5] << 0)); |
| |
| if (vsc9953_mac_table_cmd(MAC_TABLE_READ) < 0) |
| return -1; |
| |
| val = in_le32(&l2ana_reg->ana_tables.mac_access); |
| |
| if ((port_no != bitfield_extract_by_mask(val, |
| VSC9953_MAC_DESTIDX_MASK))) { |
| printf("Failed to add MAC address\n"); |
| return -1; |
| } |
| return 0; |
| } |
| |
| /* Delete a FDB entry */ |
| static int vsc9953_mac_table_del(uchar mac[6], u16 vid) |
| { |
| u32 val; |
| struct vsc9953_analyzer *l2ana_reg; |
| |
| l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + |
| VSC9953_ANA_OFFSET); |
| |
| /* check first if MAC entry is present */ |
| val = in_le32(&l2ana_reg->ana_tables.mach_data); |
| val = bitfield_replace_by_mask(val, VSC9953_MACHDATA_VID_MASK, vid) | |
| (mac[0] << 8) | (mac[1] << 0); |
| out_le32(&l2ana_reg->ana_tables.mach_data, val); |
| |
| out_le32(&l2ana_reg->ana_tables.macl_data, |
| (mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | |
| (mac[5] << 0)); |
| |
| if (vsc9953_mac_table_cmd(MAC_TABLE_LOOKUP) < 0) { |
| debug("Lookup in the MAC table failed\n"); |
| return -1; |
| } |
| |
| if (!(in_le32(&l2ana_reg->ana_tables.mac_access) & |
| VSC9953_MAC_CMD_VALID)) { |
| printf("The MAC address: %02x:%02x:%02x:%02x:%02x:%02x ", |
| mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); |
| printf("VLAN: %d does not exist.\n", vid); |
| return -1; |
| } |
| |
| /* FDB entry found, proceed to delete */ |
| val = in_le32(&l2ana_reg->ana_tables.mach_data); |
| val = bitfield_replace_by_mask(val, VSC9953_MACHDATA_VID_MASK, vid) | |
| (mac[0] << 8) | (mac[1] << 0); |
| out_le32(&l2ana_reg->ana_tables.mach_data, val); |
| |
| out_le32(&l2ana_reg->ana_tables.macl_data, (mac[2] << 24) | |
| (mac[3] << 16) | (mac[4] << 8) | (mac[5] << 0)); |
| |
| if (vsc9953_mac_table_cmd(MAC_TABLE_FORGET) < 0) |
| return -1; |
| |
| /* check if the MAC entry is still in FDB */ |
| val = in_le32(&l2ana_reg->ana_tables.mach_data); |
| val = bitfield_replace_by_mask(val, VSC9953_MACHDATA_VID_MASK, vid) | |
| (mac[0] << 8) | (mac[1] << 0); |
| out_le32(&l2ana_reg->ana_tables.mach_data, val); |
| |
| out_le32(&l2ana_reg->ana_tables.macl_data, (mac[2] << 24) | |
| (mac[3] << 16) | (mac[4] << 8) | (mac[5] << 0)); |
| |
| if (vsc9953_mac_table_cmd(MAC_TABLE_LOOKUP) < 0) { |
| debug("Lookup in the MAC table failed\n"); |
| return -1; |
| } |
| if (in_le32(&l2ana_reg->ana_tables.mac_access) & |
| VSC9953_MAC_CMD_VALID) { |
| printf("Failed to delete MAC address\n"); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /* age the unlocked entries in FDB */ |
| static void vsc9953_mac_table_age(int port_no, int vid) |
| { |
| int rc[VSC9953_MAX_PORTS]; |
| enum port_learn_mode mode[VSC9953_MAX_PORTS]; |
| u32 val; |
| int i; |
| struct vsc9953_analyzer *l2ana_reg; |
| |
| l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + |
| VSC9953_ANA_OFFSET); |
| |
| /* set port and VID for selective aging */ |
| val = in_le32(&l2ana_reg->ana.anag_efil); |
| if (port_no != ETHSW_CMD_PORT_ALL) { |
| /* disable auto learning */ |
| rc[port_no] = vsc9953_port_learn_mode_get(port_no, |
| &mode[port_no]); |
| if (!rc[port_no] && mode[port_no] != PORT_LEARN_NONE) |
| vsc9953_port_learn_mode_set(port_no, PORT_LEARN_NONE); |
| |
| val = bitfield_replace_by_mask(val, VSC9953_AGE_PORT_MASK, |
| port_no) | VSC9953_AGE_PORT_EN; |
| } else { |
| /* disable auto learning on all ports */ |
| for (i = 0; i < VSC9953_MAX_PORTS; i++) { |
| rc[i] = vsc9953_port_learn_mode_get(i, &mode[i]); |
| if (!rc[i] && mode[i] != PORT_LEARN_NONE) |
| vsc9953_port_learn_mode_set(i, PORT_LEARN_NONE); |
| } |
| } |
| |
| if (vid != ETHSW_CMD_VLAN_ALL) { |
| val = bitfield_replace_by_mask(val, VSC9953_AGE_VID_MASK, vid) | |
| VSC9953_AGE_VID_EN; |
| } |
| out_le32(&l2ana_reg->ana.anag_efil, val); |
| |
| /* age the dynamic FDB entries */ |
| vsc9953_mac_table_cmd(MAC_TABLE_AGE); |
| |
| /* clear previously set port and VID */ |
| clrbits_le32(&l2ana_reg->ana.anag_efil, VSC9953_AGE_PORT_EN | |
| VSC9953_AGE_PORT_MASK | VSC9953_AGE_VID_EN | |
| VSC9953_AGE_VID_MASK); |
| |
| if (port_no != ETHSW_CMD_PORT_ALL) { |
| if (!rc[port_no] && mode[port_no] != PORT_LEARN_NONE) |
| vsc9953_port_learn_mode_set(port_no, mode[port_no]); |
| } else { |
| for (i = 0; i < VSC9953_MAX_PORTS; i++) { |
| if (!rc[i] && mode[i] != PORT_LEARN_NONE) |
| vsc9953_port_learn_mode_set(i, mode[i]); |
| } |
| } |
| } |
| |
| /* Delete all the dynamic FDB entries */ |
| static void vsc9953_mac_table_flush(int port, int vid) |
| { |
| vsc9953_mac_table_age(port, vid); |
| vsc9953_mac_table_age(port, vid); |
| } |
| |
| enum egress_vlan_tag { |
| EGR_TAG_CLASS = 0, |
| EGR_TAG_PVID, |
| }; |
| |
| /* Set egress tag mode for a VSC9953 port */ |
| static void vsc9953_port_vlan_egress_tag_set(int port_no, |
| enum egress_vlan_tag mode) |
| { |
| struct vsc9953_rew_reg *l2rew_reg; |
| |
| l2rew_reg = (struct vsc9953_rew_reg *)(VSC9953_OFFSET + |
| VSC9953_REW_OFFSET); |
| |
| switch (mode) { |
| case EGR_TAG_CLASS: |
| clrbits_le32(&l2rew_reg->port[port_no].port_tag_cfg, |
| VSC9953_TAG_VID_PVID); |
| break; |
| case EGR_TAG_PVID: |
| setbits_le32(&l2rew_reg->port[port_no].port_tag_cfg, |
| VSC9953_TAG_VID_PVID); |
| break; |
| default: |
| printf("Unknown egress VLAN tag mode for port %d\n", port_no); |
| } |
| } |
| |
| /* Get egress tag mode for a VSC9953 port */ |
| static void vsc9953_port_vlan_egress_tag_get(int port_no, |
| enum egress_vlan_tag *mode) |
| { |
| u32 val; |
| struct vsc9953_rew_reg *l2rew_reg; |
| |
| l2rew_reg = (struct vsc9953_rew_reg *)(VSC9953_OFFSET + |
| VSC9953_REW_OFFSET); |
| |
| val = in_le32(&l2rew_reg->port[port_no].port_tag_cfg); |
| if (val & VSC9953_TAG_VID_PVID) |
| *mode = EGR_TAG_PVID; |
| else |
| *mode = EGR_TAG_CLASS; |
| } |
| |
| /* VSC9953 VLAN learning modes */ |
| enum vlan_learning_mode { |
| SHARED_VLAN_LEARNING, |
| PRIVATE_VLAN_LEARNING, |
| }; |
| |
| /* Set VLAN learning mode for VSC9953 */ |
| static void vsc9953_vlan_learning_set(enum vlan_learning_mode lrn_mode) |
| { |
| struct vsc9953_analyzer *l2ana_reg; |
| |
| l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + |
| VSC9953_ANA_OFFSET); |
| |
| switch (lrn_mode) { |
| case SHARED_VLAN_LEARNING: |
| setbits_le32(&l2ana_reg->ana.agen_ctrl, VSC9953_FID_MASK_ALL); |
| break; |
| case PRIVATE_VLAN_LEARNING: |
| clrbits_le32(&l2ana_reg->ana.agen_ctrl, VSC9953_FID_MASK_ALL); |
| break; |
| default: |
| printf("Unknown VLAN learn mode\n"); |
| } |
| } |
| |
| /* Get VLAN learning mode for VSC9953 */ |
| static int vsc9953_vlan_learning_get(enum vlan_learning_mode *lrn_mode) |
| { |
| u32 val; |
| struct vsc9953_analyzer *l2ana_reg; |
| |
| l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + |
| VSC9953_ANA_OFFSET); |
| |
| val = in_le32(&l2ana_reg->ana.agen_ctrl); |
| |
| if (!(val & VSC9953_FID_MASK_ALL)) { |
| *lrn_mode = PRIVATE_VLAN_LEARNING; |
| } else if ((val & VSC9953_FID_MASK_ALL) == VSC9953_FID_MASK_ALL) { |
| *lrn_mode = SHARED_VLAN_LEARNING; |
| } else { |
| printf("Unknown VLAN learning mode\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /* Enable/disable VLAN ingress filtering on a VSC9953 port */ |
| static void vsc9953_port_ingress_filtering_set(int port_no, int enabled) |
| { |
| struct vsc9953_analyzer *l2ana_reg; |
| |
| l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + |
| VSC9953_ANA_OFFSET); |
| |
| if (enabled) |
| setbits_le32(&l2ana_reg->ana.vlan_mask, 1 << port_no); |
| else |
| clrbits_le32(&l2ana_reg->ana.vlan_mask, 1 << port_no); |
| } |
| |
| /* Return VLAN ingress filtering on a VSC9953 port */ |
| static int vsc9953_port_ingress_filtering_get(int port_no) |
| { |
| u32 val; |
| struct vsc9953_analyzer *l2ana_reg; |
| |
| l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + |
| VSC9953_ANA_OFFSET); |
| |
| val = in_le32(&l2ana_reg->ana.vlan_mask); |
| return !!(val & (1 << port_no)); |
| } |
| |
| /* Get the aggregation group of a port */ |
| static int vsc9953_port_aggr_grp_get(int port_no, int *aggr_grp) |
| { |
| u32 val; |
| struct vsc9953_analyzer *l2ana_reg; |
| |
| if (!VSC9953_PORT_CHECK(port_no)) |
| return -EINVAL; |
| |
| l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + |
| VSC9953_ANA_OFFSET); |
| |
| val = in_le32(&l2ana_reg->port[port_no].port_cfg); |
| *aggr_grp = bitfield_extract_by_mask(val, |
| VSC9953_PORT_CFG_PORTID_MASK); |
| |
| return 0; |
| } |
| |
| static void vsc9953_aggr_grp_members_get(int aggr_grp, |
| u8 aggr_membr[VSC9953_MAX_PORTS]) |
| { |
| int port_no; |
| int aggr_membr_grp; |
| |
| for (port_no = 0; port_no < VSC9953_MAX_PORTS; port_no++) { |
| aggr_membr[port_no] = 0; |
| |
| if (vsc9953_port_aggr_grp_get(port_no, &aggr_membr_grp)) |
| continue; |
| |
| if (aggr_grp == aggr_membr_grp) |
| aggr_membr[port_no] = 1; |
| } |
| } |
| |
| static void vsc9953_update_dest_members_masks(int port_no, u32 membr_bitfld_old, |
| u32 membr_bitfld_new) |
| { |
| int i; |
| u32 pgid; |
| struct vsc9953_analyzer *l2ana_reg; |
| |
| l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + |
| VSC9953_ANA_OFFSET); |
| |
| /* |
| * NOTE: Only the unicast destination masks are updated, since |
| * we do not support for now Layer-2 multicast entries |
| */ |
| for (i = 0; i < VSC9953_MAX_PORTS; i++) { |
| if (i == port_no) { |
| clrsetbits_le32(&l2ana_reg->port_id_tbl.port_grp_id[i], |
| VSC9953_PGID_PORT_MASK, |
| membr_bitfld_new); |
| continue; |
| } |
| |
| pgid = in_le32(&l2ana_reg->port_id_tbl.port_grp_id[i]); |
| if ((u32)(1 << i) & membr_bitfld_old & VSC9953_PGID_PORT_MASK) |
| pgid &= ~((u32)(1 << port_no)); |
| if ((u32)(1 << i) & membr_bitfld_new & VSC9953_PGID_PORT_MASK) |
| pgid |= ((u32)(1 << port_no)); |
| |
| out_le32(&l2ana_reg->port_id_tbl.port_grp_id[i], pgid); |
| } |
| } |
| |
| static void vsc9953_update_source_members_masks(int port_no, |
| u32 membr_bitfld_old, |
| u32 membr_bitfld_new) |
| { |
| int i; |
| int index; |
| u32 pgid; |
| struct vsc9953_analyzer *l2ana_reg; |
| |
| l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + |
| VSC9953_ANA_OFFSET); |
| |
| for (i = 0; i < VSC9953_MAX_PORTS + 1; i++) { |
| index = PGID_SRC_START + i; |
| pgid = in_le32(&l2ana_reg->port_id_tbl.port_grp_id[index]); |
| if (i == port_no) { |
| pgid = (pgid | VSC9953_PGID_PORT_MASK) & |
| ~membr_bitfld_new; |
| out_le32(&l2ana_reg->port_id_tbl.port_grp_id[index], |
| pgid); |
| continue; |
| } |
| |
| if ((u32)(1 << i) & membr_bitfld_old & VSC9953_PGID_PORT_MASK) |
| pgid |= (u32)(1 << port_no); |
| |
| if ((u32)(1 << i) & membr_bitfld_new & VSC9953_PGID_PORT_MASK) |
| pgid &= ~(u32)(1 << port_no); |
| out_le32(&l2ana_reg->port_id_tbl.port_grp_id[index], pgid); |
| } |
| } |
| |
| static u32 vsc9953_aggr_mask_get_next(u32 aggr_mask, u32 member_bitfield) |
| { |
| if (!member_bitfield) |
| return 0; |
| |
| if (!(aggr_mask & VSC9953_PGID_PORT_MASK)) |
| aggr_mask = 1; |
| else |
| aggr_mask <<= 1; |
| |
| while (!(aggr_mask & member_bitfield)) { |
| aggr_mask <<= 1; |
| if (!(aggr_mask & VSC9953_PGID_PORT_MASK)) |
| aggr_mask = 1; |
| } |
| |
| return aggr_mask; |
| } |
| |
| static void vsc9953_update_aggr_members_masks(int port_no, u32 membr_bitfld_old, |
| u32 membr_bitfld_new) |
| { |
| int i; |
| u32 pgid; |
| u32 aggr_mask_old = 0; |
| u32 aggr_mask_new = 0; |
| struct vsc9953_analyzer *l2ana_reg; |
| |
| l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + |
| VSC9953_ANA_OFFSET); |
| |
| /* Update all the PGID aggregation masks */ |
| for (i = PGID_AGGR_START; i < PGID_SRC_START; i++) { |
| pgid = in_le32(&l2ana_reg->port_id_tbl.port_grp_id[i]); |
| |
| aggr_mask_old = vsc9953_aggr_mask_get_next(aggr_mask_old, |
| membr_bitfld_old); |
| pgid = (pgid & ~membr_bitfld_old) | aggr_mask_old; |
| |
| aggr_mask_new = vsc9953_aggr_mask_get_next(aggr_mask_new, |
| membr_bitfld_new); |
| pgid = (pgid & ~membr_bitfld_new) | aggr_mask_new; |
| |
| out_le32(&l2ana_reg->port_id_tbl.port_grp_id[i], pgid); |
| } |
| } |
| |
| static u32 vsc9953_aggr_membr_bitfield_get(u8 member[VSC9953_MAX_PORTS]) |
| { |
| int i; |
| u32 member_bitfield = 0; |
| |
| for (i = 0; i < VSC9953_MAX_PORTS; i++) { |
| if (member[i]) |
| member_bitfield |= 1 << i; |
| } |
| member_bitfield &= VSC9953_PGID_PORT_MASK; |
| |
| return member_bitfield; |
| } |
| |
| static void vsc9953_update_members_masks(int port_no, |
| u8 member_old[VSC9953_MAX_PORTS], |
| u8 member_new[VSC9953_MAX_PORTS]) |
| { |
| u32 membr_bitfld_old = vsc9953_aggr_membr_bitfield_get(member_old); |
| u32 membr_bitfld_new = vsc9953_aggr_membr_bitfield_get(member_new); |
| |
| vsc9953_update_dest_members_masks(port_no, membr_bitfld_old, |
| membr_bitfld_new); |
| vsc9953_update_source_members_masks(port_no, membr_bitfld_old, |
| membr_bitfld_new); |
| vsc9953_update_aggr_members_masks(port_no, membr_bitfld_old, |
| membr_bitfld_new); |
| } |
| |
| /* Set the aggregation group of a port */ |
| static int vsc9953_port_aggr_grp_set(int port_no, int aggr_grp) |
| { |
| u8 aggr_membr_old[VSC9953_MAX_PORTS]; |
| u8 aggr_membr_new[VSC9953_MAX_PORTS]; |
| int rc; |
| int aggr_grp_old; |
| u32 val; |
| struct vsc9953_analyzer *l2ana_reg; |
| |
| if (!VSC9953_PORT_CHECK(port_no) || !VSC9953_PORT_CHECK(aggr_grp)) |
| return -EINVAL; |
| |
| l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + |
| VSC9953_ANA_OFFSET); |
| |
| rc = vsc9953_port_aggr_grp_get(port_no, &aggr_grp_old); |
| if (rc) |
| return rc; |
| |
| /* get all the members of the old aggregation group */ |
| vsc9953_aggr_grp_members_get(aggr_grp_old, aggr_membr_old); |
| |
| /* get all the members of the same aggregation group */ |
| vsc9953_aggr_grp_members_get(aggr_grp, aggr_membr_new); |
| |
| /* add current port as member to the new aggregation group */ |
| aggr_membr_old[port_no] = 0; |
| aggr_membr_new[port_no] = 1; |
| |
| /* update masks */ |
| vsc9953_update_members_masks(port_no, aggr_membr_old, aggr_membr_new); |
| |
| /* Change logical port number */ |
| val = in_le32(&l2ana_reg->port[port_no].port_cfg); |
| val = bitfield_replace_by_mask(val, |
| VSC9953_PORT_CFG_PORTID_MASK, aggr_grp); |
| out_le32(&l2ana_reg->port[port_no].port_cfg, val); |
| |
| return 0; |
| } |
| |
| static int vsc9953_port_status_key_func(struct ethsw_command_def *parsed_cmd) |
| { |
| int i; |
| u8 enabled; |
| |
| /* Last keyword should tell us if we should enable/disable the port */ |
| if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == |
| ethsw_id_enable) |
| enabled = 1; |
| else if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == |
| ethsw_id_disable) |
| enabled = 0; |
| else |
| return CMD_RET_USAGE; |
| |
| if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { |
| if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { |
| printf("Invalid port number: %d\n", parsed_cmd->port); |
| return CMD_RET_FAILURE; |
| } |
| vsc9953_port_status_set(parsed_cmd->port, enabled); |
| } else { |
| for (i = 0; i < VSC9953_MAX_PORTS; i++) |
| vsc9953_port_status_set(i, enabled); |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int vsc9953_port_config_key_func(struct ethsw_command_def *parsed_cmd) |
| { |
| int i; |
| |
| if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { |
| if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { |
| printf("Invalid port number: %d\n", parsed_cmd->port); |
| return CMD_RET_FAILURE; |
| } |
| vsc9953_phy_autoneg(parsed_cmd->port); |
| printf("%8s %8s %8s %8s %8s\n", |
| "Port", "Status", "Link", "Speed", |
| "Duplex"); |
| vsc9953_port_config_show(parsed_cmd->port); |
| |
| } else { |
| for (i = 0; i < VSC9953_MAX_PORTS; i++) |
| vsc9953_phy_autoneg(i); |
| printf("%8s %8s %8s %8s %8s\n", |
| "Port", "Status", "Link", "Speed", "Duplex"); |
| for (i = 0; i < VSC9953_MAX_PORTS; i++) |
| vsc9953_port_config_show(i); |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int vsc9953_port_stats_key_func(struct ethsw_command_def *parsed_cmd) |
| { |
| int i; |
| |
| if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { |
| if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { |
| printf("Invalid port number: %d\n", parsed_cmd->port); |
| return CMD_RET_FAILURE; |
| } |
| vsc9953_port_statistics_show(parsed_cmd->port); |
| } else { |
| for (i = 0; i < VSC9953_MAX_PORTS; i++) |
| vsc9953_port_statistics_show(i); |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int vsc9953_port_stats_clear_key_func(struct ethsw_command_def |
| *parsed_cmd) |
| { |
| int i; |
| |
| if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { |
| if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { |
| printf("Invalid port number: %d\n", parsed_cmd->port); |
| return CMD_RET_FAILURE; |
| } |
| vsc9953_port_statistics_clear(parsed_cmd->port); |
| } else { |
| for (i = 0; i < VSC9953_MAX_PORTS; i++) |
| vsc9953_port_statistics_clear(i); |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int vsc9953_learn_show_key_func(struct ethsw_command_def *parsed_cmd) |
| { |
| int i; |
| enum port_learn_mode mode; |
| |
| if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { |
| if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { |
| printf("Invalid port number: %d\n", parsed_cmd->port); |
| return CMD_RET_FAILURE; |
| } |
| if (vsc9953_port_learn_mode_get(parsed_cmd->port, &mode)) |
| return CMD_RET_FAILURE; |
| printf("%7s %11s\n", "Port", "Learn mode"); |
| switch (mode) { |
| case PORT_LEARN_NONE: |
| printf("%7d %11s\n", parsed_cmd->port, "disable"); |
| break; |
| case PORT_LEARN_AUTO: |
| printf("%7d %11s\n", parsed_cmd->port, "auto"); |
| break; |
| default: |
| printf("%7d %11s\n", parsed_cmd->port, "-"); |
| } |
| } else { |
| printf("%7s %11s\n", "Port", "Learn mode"); |
| for (i = 0; i < VSC9953_MAX_PORTS; i++) { |
| if (vsc9953_port_learn_mode_get(i, &mode)) |
| continue; |
| switch (mode) { |
| case PORT_LEARN_NONE: |
| printf("%7d %11s\n", i, "disable"); |
| break; |
| case PORT_LEARN_AUTO: |
| printf("%7d %11s\n", i, "auto"); |
| break; |
| default: |
| printf("%7d %11s\n", i, "-"); |
| } |
| } |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int vsc9953_learn_set_key_func(struct ethsw_command_def *parsed_cmd) |
| { |
| int i; |
| enum port_learn_mode mode; |
| |
| /* Last keyword should tell us the learn mode */ |
| if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == |
| ethsw_id_auto) |
| mode = PORT_LEARN_AUTO; |
| else if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == |
| ethsw_id_disable) |
| mode = PORT_LEARN_NONE; |
| else |
| return CMD_RET_USAGE; |
| |
| if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { |
| if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { |
| printf("Invalid port number: %d\n", parsed_cmd->port); |
| return CMD_RET_FAILURE; |
| } |
| vsc9953_port_learn_mode_set(parsed_cmd->port, mode); |
| } else { |
| for (i = 0; i < VSC9953_MAX_PORTS; i++) |
| vsc9953_port_learn_mode_set(i, mode); |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int vsc9953_fdb_show_key_func(struct ethsw_command_def *parsed_cmd) |
| { |
| if (parsed_cmd->port != ETHSW_CMD_PORT_ALL && |
| !VSC9953_PORT_CHECK(parsed_cmd->port)) { |
| printf("Invalid port number: %d\n", parsed_cmd->port); |
| return CMD_RET_FAILURE; |
| } |
| |
| if (parsed_cmd->vid != ETHSW_CMD_VLAN_ALL && |
| !VSC9953_VLAN_CHECK(parsed_cmd->vid)) { |
| printf("Invalid VID number: %d\n", parsed_cmd->vid); |
| return CMD_RET_FAILURE; |
| } |
| |
| vsc9953_mac_table_show(parsed_cmd->port, parsed_cmd->vid); |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int vsc9953_fdb_flush_key_func(struct ethsw_command_def *parsed_cmd) |
| { |
| if (parsed_cmd->port != ETHSW_CMD_PORT_ALL && |
| !VSC9953_PORT_CHECK(parsed_cmd->port)) { |
| printf("Invalid port number: %d\n", parsed_cmd->port); |
| return CMD_RET_FAILURE; |
| } |
| |
| if (parsed_cmd->vid != ETHSW_CMD_VLAN_ALL && |
| !VSC9953_VLAN_CHECK(parsed_cmd->vid)) { |
| printf("Invalid VID number: %d\n", parsed_cmd->vid); |
| return CMD_RET_FAILURE; |
| } |
| |
| vsc9953_mac_table_flush(parsed_cmd->port, parsed_cmd->vid); |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int vsc9953_fdb_entry_add_key_func(struct ethsw_command_def *parsed_cmd) |
| { |
| int vid; |
| |
| /* a port number must be present */ |
| if (parsed_cmd->port == ETHSW_CMD_PORT_ALL) { |
| printf("Please specify a port\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { |
| printf("Invalid port number: %d\n", parsed_cmd->port); |
| return CMD_RET_FAILURE; |
| } |
| |
| /* Use VLAN 1 if VID is not set */ |
| vid = (parsed_cmd->vid == ETHSW_CMD_VLAN_ALL ? 1 : parsed_cmd->vid); |
| |
| if (!VSC9953_VLAN_CHECK(vid)) { |
| printf("Invalid VID number: %d\n", vid); |
| return CMD_RET_FAILURE; |
| } |
| |
| if (vsc9953_mac_table_add(parsed_cmd->port, parsed_cmd->ethaddr, vid)) |
| return CMD_RET_FAILURE; |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int vsc9953_fdb_entry_del_key_func(struct ethsw_command_def *parsed_cmd) |
| { |
| int vid; |
| |
| /* Use VLAN 1 if VID is not set */ |
| vid = (parsed_cmd->vid == ETHSW_CMD_VLAN_ALL ? 1 : parsed_cmd->vid); |
| |
| if (!VSC9953_VLAN_CHECK(vid)) { |
| printf("Invalid VID number: %d\n", vid); |
| return CMD_RET_FAILURE; |
| } |
| |
| if (vsc9953_mac_table_del(parsed_cmd->ethaddr, vid)) |
| return CMD_RET_FAILURE; |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int vsc9953_pvid_show_key_func(struct ethsw_command_def *parsed_cmd) |
| { |
| int i; |
| int pvid; |
| |
| if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { |
| if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { |
| printf("Invalid port number: %d\n", parsed_cmd->port); |
| return CMD_RET_FAILURE; |
| } |
| |
| if (vsc9953_port_vlan_pvid_get(parsed_cmd->port, &pvid)) |
| return CMD_RET_FAILURE; |
| printf("%7s %7s\n", "Port", "PVID"); |
| printf("%7d %7d\n", parsed_cmd->port, pvid); |
| } else { |
| printf("%7s %7s\n", "Port", "PVID"); |
| for (i = 0; i < VSC9953_MAX_PORTS; i++) { |
| if (vsc9953_port_vlan_pvid_get(i, &pvid)) |
| continue; |
| printf("%7d %7d\n", i, pvid); |
| } |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int vsc9953_pvid_set_key_func(struct ethsw_command_def *parsed_cmd) |
| { |
| /* PVID number should be set in parsed_cmd->vid */ |
| if (parsed_cmd->vid == ETHSW_CMD_VLAN_ALL) { |
| printf("Please set a pvid value\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| if (!VSC9953_VLAN_CHECK(parsed_cmd->vid)) { |
| printf("Invalid VID number: %d\n", parsed_cmd->vid); |
| return CMD_RET_FAILURE; |
| } |
| |
| if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { |
| if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { |
| printf("Invalid port number: %d\n", parsed_cmd->port); |
| return CMD_RET_FAILURE; |
| } |
| vsc9953_port_vlan_pvid_set(parsed_cmd->port, parsed_cmd->vid); |
| } else { |
| vsc9953_port_all_vlan_pvid_set(parsed_cmd->vid); |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int vsc9953_vlan_show_key_func(struct ethsw_command_def *parsed_cmd) |
| { |
| int i; |
| |
| if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { |
| if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { |
| printf("Invalid port number: %d\n", parsed_cmd->port); |
| return CMD_RET_FAILURE; |
| } |
| vsc9953_vlan_membership_show(parsed_cmd->port); |
| } else { |
| for (i = 0; i < VSC9953_MAX_PORTS; i++) |
| vsc9953_vlan_membership_show(i); |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int vsc9953_vlan_set_key_func(struct ethsw_command_def *parsed_cmd) |
| { |
| int i; |
| int add; |
| |
| /* VLAN should be set in parsed_cmd->vid */ |
| if (parsed_cmd->vid == ETHSW_CMD_VLAN_ALL) { |
| printf("Please set a vlan value\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| if (!VSC9953_VLAN_CHECK(parsed_cmd->vid)) { |
| printf("Invalid VID number: %d\n", parsed_cmd->vid); |
| return CMD_RET_FAILURE; |
| } |
| |
| /* keywords add/delete should be the last but one in array */ |
| if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 2] == |
| ethsw_id_add) |
| add = 1; |
| else if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 2] == |
| ethsw_id_del) |
| add = 0; |
| else |
| return CMD_RET_USAGE; |
| |
| if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { |
| if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { |
| printf("Invalid port number: %d\n", parsed_cmd->port); |
| return CMD_RET_FAILURE; |
| } |
| vsc9953_vlan_table_membership_set(parsed_cmd->vid, |
| parsed_cmd->port, add); |
| } else { |
| for (i = 0; i < VSC9953_MAX_PORTS; i++) |
| vsc9953_vlan_table_membership_set(parsed_cmd->vid, i, |
| add); |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| static int vsc9953_port_untag_show_key_func( |
| struct ethsw_command_def *parsed_cmd) |
| { |
| int i; |
| |
| printf("%7s\t%17s\n", "Port", "Untag"); |
| if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { |
| if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { |
| printf("Invalid port number: %d\n", parsed_cmd->port); |
| return CMD_RET_FAILURE; |
| } |
| vsc9953_port_vlan_egr_untag_show(parsed_cmd->port); |
| } else { |
| for (i = 0; i < VSC9953_MAX_PORTS; i++) |
| vsc9953_port_vlan_egr_untag_show(i); |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int vsc9953_port_untag_set_key_func(struct ethsw_command_def *parsed_cmd) |
| { |
| int i; |
| enum egress_untag_mode mode; |
| |
| /* keywords for the untagged mode are the last in the array */ |
| if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == |
| ethsw_id_all) |
| mode = EGRESS_UNTAG_ALL; |
| else if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == |
| ethsw_id_none) |
| mode = EGRESS_UNTAG_NONE; |
| else if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == |
| ethsw_id_pvid) |
| mode = EGRESS_UNTAG_PVID_AND_ZERO; |
| else |
| return CMD_RET_USAGE; |
| |
| if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { |
| if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { |
| printf("Invalid port number: %d\n", parsed_cmd->port); |
| return CMD_RET_FAILURE; |
| } |
| vsc9953_port_vlan_egr_untag_set(parsed_cmd->port, mode); |
| } else { |
| for (i = 0; i < VSC9953_MAX_PORTS; i++) |
| vsc9953_port_vlan_egr_untag_set(i, mode); |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int vsc9953_egr_vlan_tag_show_key_func( |
| struct ethsw_command_def *parsed_cmd) |
| { |
| int i; |
| enum egress_vlan_tag mode; |
| |
| if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { |
| if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { |
| printf("Invalid port number: %d\n", parsed_cmd->port); |
| return CMD_RET_FAILURE; |
| } |
| vsc9953_port_vlan_egress_tag_get(parsed_cmd->port, &mode); |
| printf("%7s\t%12s\n", "Port", "Egress VID"); |
| printf("%7d\t", parsed_cmd->port); |
| switch (mode) { |
| case EGR_TAG_CLASS: |
| printf("%12s\n", "classified"); |
| break; |
| case EGR_TAG_PVID: |
| printf("%12s\n", "pvid"); |
| break; |
| default: |
| printf("%12s\n", "-"); |
| } |
| } else { |
| printf("%7s\t%12s\n", "Port", "Egress VID"); |
| for (i = 0; i < VSC9953_MAX_PORTS; i++) { |
| vsc9953_port_vlan_egress_tag_get(i, &mode); |
| switch (mode) { |
| case EGR_TAG_CLASS: |
| printf("%7d\t%12s\n", i, "classified"); |
| break; |
| case EGR_TAG_PVID: |
| printf("%7d\t%12s\n", i, "pvid"); |
| break; |
| default: |
| printf("%7d\t%12s\n", i, "-"); |
| } |
| } |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int vsc9953_egr_vlan_tag_set_key_func( |
| struct ethsw_command_def *parsed_cmd) |
| { |
| int i; |
| enum egress_vlan_tag mode; |
| |
| /* keywords for the egress vlan tag mode are the last in the array */ |
| if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == |
| ethsw_id_pvid) |
| mode = EGR_TAG_PVID; |
| else if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == |
| ethsw_id_classified) |
| mode = EGR_TAG_CLASS; |
| else |
| return CMD_RET_USAGE; |
| |
| if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { |
| if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { |
| printf("Invalid port number: %d\n", parsed_cmd->port); |
| return CMD_RET_FAILURE; |
| } |
| vsc9953_port_vlan_egress_tag_set(parsed_cmd->port, mode); |
| } else { |
| for (i = 0; i < VSC9953_MAX_PORTS; i++) |
| vsc9953_port_vlan_egress_tag_set(i, mode); |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int vsc9953_vlan_learn_show_key_func( |
| struct ethsw_command_def *parsed_cmd) |
| { |
| int rc; |
| enum vlan_learning_mode mode; |
| |
| rc = vsc9953_vlan_learning_get(&mode); |
| if (rc) |
| return CMD_RET_FAILURE; |
| |
| switch (mode) { |
| case SHARED_VLAN_LEARNING: |
| printf("VLAN learning mode: shared\n"); |
| break; |
| case PRIVATE_VLAN_LEARNING: |
| printf("VLAN learning mode: private\n"); |
| break; |
| default: |
| printf("Unknown VLAN learning mode\n"); |
| rc = CMD_RET_FAILURE; |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int vsc9953_vlan_learn_set_key_func(struct ethsw_command_def *parsed_cmd) |
| { |
| enum vlan_learning_mode mode; |
| |
| /* keywords for shared/private are the last in the array */ |
| if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == |
| ethsw_id_shared) |
| mode = SHARED_VLAN_LEARNING; |
| else if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == |
| ethsw_id_private) |
| mode = PRIVATE_VLAN_LEARNING; |
| else |
| return CMD_RET_USAGE; |
| |
| vsc9953_vlan_learning_set(mode); |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int vsc9953_ingr_fltr_show_key_func(struct ethsw_command_def *parsed_cmd) |
| { |
| int i; |
| int enabled; |
| |
| printf("%7s\t%18s\n", "Port", "Ingress filtering"); |
| if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { |
| if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { |
| printf("Invalid port number: %d\n", parsed_cmd->port); |
| return CMD_RET_FAILURE; |
| } |
| enabled = vsc9953_port_ingress_filtering_get(parsed_cmd->port); |
| printf("%7d\t%18s\n", parsed_cmd->port, enabled ? "enable" : |
| "disable"); |
| } else { |
| for (i = 0; i < VSC9953_MAX_PORTS; i++) { |
| enabled = vsc9953_port_ingress_filtering_get(i); |
| printf("%7d\t%18s\n", parsed_cmd->port, enabled ? |
| "enable" : |
| "disable"); |
| } |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int vsc9953_ingr_fltr_set_key_func(struct ethsw_command_def *parsed_cmd) |
| { |
| int i; |
| int enable; |
| |
| /* keywords for enabling/disabling ingress filtering |
| * are the last in the array |
| */ |
| if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == |
| ethsw_id_enable) |
| enable = 1; |
| else if (parsed_cmd->cmd_to_keywords[parsed_cmd->cmd_keywords_nr - 1] == |
| ethsw_id_disable) |
| enable = 0; |
| else |
| return CMD_RET_USAGE; |
| |
| if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { |
| if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { |
| printf("Invalid port number: %d\n", parsed_cmd->port); |
| return CMD_RET_FAILURE; |
| } |
| vsc9953_port_ingress_filtering_set(parsed_cmd->port, enable); |
| } else { |
| for (i = 0; i < VSC9953_MAX_PORTS; i++) |
| vsc9953_port_ingress_filtering_set(i, enable); |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int vsc9953_port_aggr_show_key_func(struct ethsw_command_def *parsed_cmd) |
| { |
| int i; |
| int aggr_grp; |
| |
| if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { |
| if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { |
| printf("Invalid port number: %d\n", parsed_cmd->port); |
| return CMD_RET_FAILURE; |
| } |
| |
| if (vsc9953_port_aggr_grp_get(parsed_cmd->port, &aggr_grp)) |
| return CMD_RET_FAILURE; |
| printf("%7s %10s\n", "Port", "Aggr grp"); |
| printf("%7d %10d\n", parsed_cmd->port, aggr_grp); |
| } else { |
| printf("%7s %10s\n", "Port", "Aggr grp"); |
| for (i = 0; i < VSC9953_MAX_PORTS; i++) { |
| if (vsc9953_port_aggr_grp_get(i, &aggr_grp)) |
| continue; |
| printf("%7d %10d\n", i, aggr_grp); |
| } |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static int vsc9953_port_aggr_set_key_func(struct ethsw_command_def *parsed_cmd) |
| { |
| int i; |
| |
| /* Aggregation group number should be set in parsed_cmd->aggr_grp */ |
| if (parsed_cmd->aggr_grp == ETHSW_CMD_AGGR_GRP_NONE) { |
| printf("Please set an aggregation group value\n"); |
| return CMD_RET_FAILURE; |
| } |
| |
| if (!VSC9953_PORT_CHECK(parsed_cmd->aggr_grp)) { |
| printf("Invalid aggregation group number: %d\n", |
| parsed_cmd->aggr_grp); |
| return CMD_RET_FAILURE; |
| } |
| |
| if (parsed_cmd->port != ETHSW_CMD_PORT_ALL) { |
| if (!VSC9953_PORT_CHECK(parsed_cmd->port)) { |
| printf("Invalid port number: %d\n", parsed_cmd->port); |
| return CMD_RET_FAILURE; |
| } |
| if (vsc9953_port_aggr_grp_set(parsed_cmd->port, |
| parsed_cmd->aggr_grp)) { |
| printf("Port %d: failed to set aggr group %d\n", |
| parsed_cmd->port, parsed_cmd->aggr_grp); |
| } |
| } else { |
| for (i = 0; i < VSC9953_MAX_PORTS; i++) { |
| if (vsc9953_port_aggr_grp_set(i, |
| parsed_cmd->aggr_grp)) { |
| printf("Port %d: failed to set aggr group %d\n", |
| i, parsed_cmd->aggr_grp); |
| } |
| } |
| } |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| static struct ethsw_command_func vsc9953_cmd_func = { |
| .ethsw_name = "L2 Switch VSC9953", |
| .port_enable = &vsc9953_port_status_key_func, |
| .port_disable = &vsc9953_port_status_key_func, |
| .port_show = &vsc9953_port_config_key_func, |
| .port_stats = &vsc9953_port_stats_key_func, |
| .port_stats_clear = &vsc9953_port_stats_clear_key_func, |
| .port_learn = &vsc9953_learn_set_key_func, |
| .port_learn_show = &vsc9953_learn_show_key_func, |
| .fdb_show = &vsc9953_fdb_show_key_func, |
| .fdb_flush = &vsc9953_fdb_flush_key_func, |
| .fdb_entry_add = &vsc9953_fdb_entry_add_key_func, |
| .fdb_entry_del = &vsc9953_fdb_entry_del_key_func, |
| .pvid_show = &vsc9953_pvid_show_key_func, |
| .pvid_set = &vsc9953_pvid_set_key_func, |
| .vlan_show = &vsc9953_vlan_show_key_func, |
| .vlan_set = &vsc9953_vlan_set_key_func, |
| .port_untag_show = &vsc9953_port_untag_show_key_func, |
| .port_untag_set = &vsc9953_port_untag_set_key_func, |
| .port_egr_vlan_show = &vsc9953_egr_vlan_tag_show_key_func, |
| .port_egr_vlan_set = &vsc9953_egr_vlan_tag_set_key_func, |
| .vlan_learn_show = &vsc9953_vlan_learn_show_key_func, |
| .vlan_learn_set = &vsc9953_vlan_learn_set_key_func, |
| .port_ingr_filt_show = &vsc9953_ingr_fltr_show_key_func, |
| .port_ingr_filt_set = &vsc9953_ingr_fltr_set_key_func, |
| .port_aggr_show = &vsc9953_port_aggr_show_key_func, |
| .port_aggr_set = &vsc9953_port_aggr_set_key_func, |
| }; |
| |
| #endif /* CONFIG_CMD_ETHSW */ |
| |
| /***************************************************************************** |
| At startup, the default configuration would be: |
| - HW learning enabled on all ports; (HW default) |
| - All ports are in VLAN 1; |
| - All ports are VLAN aware; |
| - All ports have POP_COUNT 1; |
| - All ports have PVID 1; |
| - All ports have TPID 0x8100; (HW default) |
| - All ports tag frames classified to all VLANs that are not PVID; |
| *****************************************************************************/ |
| void vsc9953_default_configuration(void) |
| { |
| int i; |
| |
| if (vsc9953_autoage_time_set(VSC9953_DEFAULT_AGE_TIME)) |
| debug("VSC9953: failed to set AGE time to %d\n", |
| VSC9953_DEFAULT_AGE_TIME); |
| |
| for (i = 0; i < VSC9953_MAX_VLAN; i++) |
| vsc9953_vlan_table_membership_all_set(i, 0); |
| vsc9953_port_all_vlan_aware_set(1); |
| vsc9953_port_all_vlan_pvid_set(1); |
| vsc9953_port_all_vlan_poncnt_set(1); |
| vsc9953_vlan_table_membership_all_set(1, 1); |
| vsc9953_vlan_ingr_fltr_learn_drop(1); |
| vsc9953_port_all_vlan_egress_untagged_set(EGRESS_UNTAG_PVID_AND_ZERO); |
| if (vsc9953_aggr_code_set(AGGR_CODE_ALL)) |
| debug("VSC9953: failed to set default aggregation code mode\n"); |
| } |
| |
| void vsc9953_init(bd_t *bis) |
| { |
| u32 i; |
| u32 hdx_cfg = 0; |
| u32 phy_addr = 0; |
| int timeout; |
| struct vsc9953_system_reg *l2sys_reg; |
| struct vsc9953_qsys_reg *l2qsys_reg; |
| struct vsc9953_dev_gmii *l2dev_gmii_reg; |
| struct vsc9953_analyzer *l2ana_reg; |
| struct vsc9953_devcpu_gcb *l2dev_gcb; |
| |
| l2dev_gmii_reg = (struct vsc9953_dev_gmii *)(VSC9953_OFFSET + |
| VSC9953_DEV_GMII_OFFSET); |
| |
| l2ana_reg = (struct vsc9953_analyzer *)(VSC9953_OFFSET + |
| VSC9953_ANA_OFFSET); |
| |
| l2sys_reg = (struct vsc9953_system_reg *)(VSC9953_OFFSET + |
| VSC9953_SYS_OFFSET); |
| |
| l2qsys_reg = (struct vsc9953_qsys_reg *)(VSC9953_OFFSET + |
| VSC9953_QSYS_OFFSET); |
| |
| l2dev_gcb = (struct vsc9953_devcpu_gcb *)(VSC9953_OFFSET + |
| VSC9953_DEVCPU_GCB); |
| |
| out_le32(&l2dev_gcb->chip_regs.soft_rst, |
| VSC9953_SOFT_SWC_RST_ENA); |
| timeout = 50000; |
| while ((in_le32(&l2dev_gcb->chip_regs.soft_rst) & |
| VSC9953_SOFT_SWC_RST_ENA) && --timeout) |
| udelay(1); /* busy wait for vsc9953 soft reset */ |
| if (timeout == 0) |
| debug("Timeout waiting for VSC9953 to reset\n"); |
| |
| out_le32(&l2sys_reg->sys.reset_cfg, VSC9953_MEM_ENABLE | |
| VSC9953_MEM_INIT); |
| |
| timeout = 50000; |
| while ((in_le32(&l2sys_reg->sys.reset_cfg) & |
| VSC9953_MEM_INIT) && --timeout) |
| udelay(1); /* busy wait for vsc9953 memory init */ |
| if (timeout == 0) |
| debug("Timeout waiting for VSC9953 memory to initialize\n"); |
| |
| out_le32(&l2sys_reg->sys.reset_cfg, (in_le32(&l2sys_reg->sys.reset_cfg) |
| | VSC9953_CORE_ENABLE)); |
| |
| /* VSC9953 Setting to be done once only */ |
| out_le32(&l2qsys_reg->sys.ext_cpu_cfg, 0x00000b00); |
| |
| for (i = 0; i < VSC9953_MAX_PORTS; i++) { |
| if (vsc9953_port_init(i)) |
| printf("Failed to initialize l2switch port %d\n", i); |
| |
| if (!vsc9953_l2sw.port[i].enabled) |
| continue; |
| |
| /* Enable VSC9953 GMII Ports Port ID 0 - 7 */ |
| if (VSC9953_INTERNAL_PORT_CHECK(i)) { |
| out_le32(&l2ana_reg->pfc[i].pfc_cfg, |
| VSC9953_PFC_FC_QSGMII); |
| out_le32(&l2sys_reg->pause_cfg.mac_fc_cfg[i], |
| VSC9953_MAC_FC_CFG_QSGMII); |
| } else { |
| out_le32(&l2ana_reg->pfc[i].pfc_cfg, |
| VSC9953_PFC_FC); |
| out_le32(&l2sys_reg->pause_cfg.mac_fc_cfg[i], |
| VSC9953_MAC_FC_CFG); |
| } |
| |
| l2dev_gmii_reg = (struct vsc9953_dev_gmii *) |
| (VSC9953_OFFSET + VSC9953_DEV_GMII_OFFSET + |
| T1040_SWITCH_GMII_DEV_OFFSET * i); |
| |
| out_le32(&l2dev_gmii_reg->port_mode.clock_cfg, |
| VSC9953_CLOCK_CFG); |
| out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_ena_cfg, |
| VSC9953_MAC_ENA_CFG); |
| out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_mode_cfg, |
| VSC9953_MAC_MODE_CFG); |
| out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_ifg_cfg, |
| VSC9953_MAC_IFG_CFG); |
| /* mac_hdx_cfg varies with port id*/ |
| hdx_cfg = VSC9953_MAC_HDX_CFG | (i << 16); |
| out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_hdx_cfg, hdx_cfg); |
| out_le32(&l2sys_reg->sys.front_port_mode[i], |
| VSC9953_FRONT_PORT_MODE); |
| setbits_le32(&l2qsys_reg->sys.switch_port_mode[i], |
| VSC9953_PORT_ENA); |
| out_le32(&l2dev_gmii_reg->mac_cfg_status.mac_maxlen_cfg, |
| VSC9953_MAC_MAX_LEN); |
| out_le32(&l2sys_reg->pause_cfg.pause_cfg[i], |
| VSC9953_PAUSE_CFG); |
| /* WAIT FOR 2 us*/ |
| udelay(2); |
| |
| /* Initialize Lynx PHY Wrappers */ |
| phy_addr = 0; |
| if (vsc9953_l2sw.port[i].enet_if == |
| PHY_INTERFACE_MODE_QSGMII) |
| phy_addr = (i + 0x4) & 0x1F; |
| else if (vsc9953_l2sw.port[i].enet_if == |
| PHY_INTERFACE_MODE_SGMII) |
| phy_addr = (i + 1) & 0x1F; |
| |
| if (phy_addr) { |
| /* SGMII IF mode + AN enable */ |
| vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, |
| 0x14, PHY_SGMII_IF_MODE_AN | |
| PHY_SGMII_IF_MODE_SGMII); |
| /* Dev ability according to SGMII specification */ |
| vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, |
| 0x4, PHY_SGMII_DEV_ABILITY_SGMII); |
| /* Adjust link timer for SGMII |
| * 1.6 ms in units of 8 ns = 2 * 10^5 = 0x30d40 |
| */ |
| vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, |
| 0x13, 0x0003); |
| vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, |
| 0x12, 0x0d40); |
| /* Restart AN */ |
| vsc9953_mdio_write(&l2dev_gcb->mii_mng[0], phy_addr, |
| 0x0, PHY_SGMII_CR_DEF_VAL | |
| PHY_SGMII_CR_RESET_AN); |
| |
| timeout = 50000; |
| while ((vsc9953_mdio_read(&l2dev_gcb->mii_mng[0], |
| phy_addr, 0x01) & 0x0020) && --timeout) |
| udelay(1); /* wait for AN to complete */ |
| if (timeout == 0) |
| debug("Timeout waiting for AN to complete\n"); |
| } |
| } |
| |
| vsc9953_default_configuration(); |
| |
| #ifdef CONFIG_CMD_ETHSW |
| if (ethsw_define_functions(&vsc9953_cmd_func) < 0) |
| debug("Unable to use \"ethsw\" commands\n"); |
| #endif |
| |
| printf("VSC9953 L2 switch initialized\n"); |
| return; |
| } |