| /* |
| * Copyright (C) 2012-2015 Panasonic Corporation |
| * Copyright (C) 2015-2017 Socionext Inc. |
| * Author: Masahiro Yamada <yamada.masahiro@socionext.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <fdt_support.h> |
| #include <fdtdec.h> |
| #include <linux/errno.h> |
| #include <linux/sizes.h> |
| |
| #include "sg-regs.h" |
| #include "soc-info.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| struct uniphier_memif_data { |
| unsigned int soc_id; |
| unsigned long sparse_ch1_base; |
| int have_ch2; |
| }; |
| |
| static const struct uniphier_memif_data uniphier_memif_data[] = { |
| { |
| .soc_id = UNIPHIER_LD4_ID, |
| .sparse_ch1_base = 0xc0000000, |
| }, |
| { |
| .soc_id = UNIPHIER_PRO4_ID, |
| .sparse_ch1_base = 0xa0000000, |
| }, |
| { |
| .soc_id = UNIPHIER_SLD8_ID, |
| .sparse_ch1_base = 0xc0000000, |
| }, |
| { |
| .soc_id = UNIPHIER_PRO5_ID, |
| .sparse_ch1_base = 0xc0000000, |
| }, |
| { |
| .soc_id = UNIPHIER_PXS2_ID, |
| .sparse_ch1_base = 0xc0000000, |
| .have_ch2 = 1, |
| }, |
| { |
| .soc_id = UNIPHIER_LD6B_ID, |
| .sparse_ch1_base = 0xc0000000, |
| .have_ch2 = 1, |
| }, |
| { |
| .soc_id = UNIPHIER_LD11_ID, |
| .sparse_ch1_base = 0xc0000000, |
| }, |
| { |
| .soc_id = UNIPHIER_LD20_ID, |
| .sparse_ch1_base = 0xc0000000, |
| .have_ch2 = 1, |
| }, |
| { |
| .soc_id = UNIPHIER_PXS3_ID, |
| .sparse_ch1_base = 0xc0000000, |
| .have_ch2 = 1, |
| }, |
| }; |
| UNIPHIER_DEFINE_SOCDATA_FUNC(uniphier_get_memif_data, uniphier_memif_data) |
| |
| struct uniphier_dram_map { |
| unsigned long base; |
| unsigned long size; |
| }; |
| |
| static int uniphier_memconf_decode(struct uniphier_dram_map *dram_map) |
| { |
| const struct uniphier_memif_data *data; |
| unsigned long size; |
| u32 val; |
| |
| data = uniphier_get_memif_data(); |
| if (!data) { |
| pr_err("unsupported SoC\n"); |
| return -EINVAL; |
| } |
| |
| val = readl(SG_MEMCONF); |
| |
| /* set up ch0 */ |
| dram_map[0].base = CONFIG_SYS_SDRAM_BASE; |
| |
| switch (val & SG_MEMCONF_CH0_SZ_MASK) { |
| case SG_MEMCONF_CH0_SZ_64M: |
| size = SZ_64M; |
| break; |
| case SG_MEMCONF_CH0_SZ_128M: |
| size = SZ_128M; |
| break; |
| case SG_MEMCONF_CH0_SZ_256M: |
| size = SZ_256M; |
| break; |
| case SG_MEMCONF_CH0_SZ_512M: |
| size = SZ_512M; |
| break; |
| case SG_MEMCONF_CH0_SZ_1G: |
| size = SZ_1G; |
| break; |
| default: |
| pr_err("error: invalid value is set to MEMCONF ch0 size\n"); |
| return -EINVAL; |
| } |
| |
| if ((val & SG_MEMCONF_CH0_NUM_MASK) == SG_MEMCONF_CH0_NUM_2) |
| size *= 2; |
| |
| dram_map[0].size = size; |
| |
| /* set up ch1 */ |
| dram_map[1].base = dram_map[0].base + size; |
| |
| if (val & SG_MEMCONF_SPARSEMEM) { |
| if (dram_map[1].base > data->sparse_ch1_base) { |
| pr_warn("Sparse mem is enabled, but ch0 and ch1 overlap\n"); |
| pr_warn("Only ch0 is available\n"); |
| dram_map[1].base = 0; |
| return 0; |
| } |
| |
| dram_map[1].base = data->sparse_ch1_base; |
| } |
| |
| switch (val & SG_MEMCONF_CH1_SZ_MASK) { |
| case SG_MEMCONF_CH1_SZ_64M: |
| size = SZ_64M; |
| break; |
| case SG_MEMCONF_CH1_SZ_128M: |
| size = SZ_128M; |
| break; |
| case SG_MEMCONF_CH1_SZ_256M: |
| size = SZ_256M; |
| break; |
| case SG_MEMCONF_CH1_SZ_512M: |
| size = SZ_512M; |
| break; |
| case SG_MEMCONF_CH1_SZ_1G: |
| size = SZ_1G; |
| break; |
| default: |
| pr_err("error: invalid value is set to MEMCONF ch1 size\n"); |
| return -EINVAL; |
| } |
| |
| if ((val & SG_MEMCONF_CH1_NUM_MASK) == SG_MEMCONF_CH1_NUM_2) |
| size *= 2; |
| |
| dram_map[1].size = size; |
| |
| if (!data->have_ch2 || val & SG_MEMCONF_CH2_DISABLE) |
| return 0; |
| |
| /* set up ch2 */ |
| dram_map[2].base = dram_map[1].base + size; |
| |
| switch (val & SG_MEMCONF_CH2_SZ_MASK) { |
| case SG_MEMCONF_CH2_SZ_64M: |
| size = SZ_64M; |
| break; |
| case SG_MEMCONF_CH2_SZ_128M: |
| size = SZ_128M; |
| break; |
| case SG_MEMCONF_CH2_SZ_256M: |
| size = SZ_256M; |
| break; |
| case SG_MEMCONF_CH2_SZ_512M: |
| size = SZ_512M; |
| break; |
| case SG_MEMCONF_CH2_SZ_1G: |
| size = SZ_1G; |
| break; |
| default: |
| pr_err("error: invalid value is set to MEMCONF ch2 size\n"); |
| return -EINVAL; |
| } |
| |
| if ((val & SG_MEMCONF_CH2_NUM_MASK) == SG_MEMCONF_CH2_NUM_2) |
| size *= 2; |
| |
| dram_map[2].size = size; |
| |
| return 0; |
| } |
| |
| int dram_init(void) |
| { |
| struct uniphier_dram_map dram_map[3] = {}; |
| int ret, i; |
| |
| gd->ram_size = 0; |
| |
| ret = uniphier_memconf_decode(dram_map); |
| if (ret) |
| return ret; |
| |
| for (i = 0; i < ARRAY_SIZE(dram_map); i++) { |
| |
| if (!dram_map[i].size) |
| break; |
| |
| /* |
| * U-Boot relocates itself to the tail of the memory region, |
| * but it does not expect sparse memory. We use the first |
| * contiguous chunk here. |
| */ |
| if (i > 0 && dram_map[i - 1].base + dram_map[i - 1].size < |
| dram_map[i].base) |
| break; |
| |
| gd->ram_size += dram_map[i].size; |
| } |
| |
| return 0; |
| } |
| |
| int dram_init_banksize(void) |
| { |
| struct uniphier_dram_map dram_map[3] = {}; |
| int i; |
| |
| uniphier_memconf_decode(dram_map); |
| |
| for (i = 0; i < ARRAY_SIZE(dram_map); i++) { |
| if (i >= ARRAY_SIZE(gd->bd->bi_dram)) |
| break; |
| |
| gd->bd->bi_dram[i].start = dram_map[i].base; |
| gd->bd->bi_dram[i].size = dram_map[i].size; |
| } |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_OF_BOARD_SETUP |
| /* |
| * The DRAM PHY requires 64 byte scratch area in each DRAM channel |
| * for its dynamic PHY training feature. |
| */ |
| int ft_board_setup(void *fdt, bd_t *bd) |
| { |
| unsigned long rsv_addr; |
| const unsigned long rsv_size = 64; |
| int i, ret; |
| |
| if (uniphier_get_soc_id() != UNIPHIER_LD20_ID) |
| return 0; |
| |
| for (i = 0; i < ARRAY_SIZE(gd->bd->bi_dram); i++) { |
| if (!gd->bd->bi_dram[i].size) |
| continue; |
| |
| rsv_addr = gd->bd->bi_dram[i].start + gd->bd->bi_dram[i].size; |
| rsv_addr -= rsv_size; |
| |
| ret = fdt_add_mem_rsv(fdt, rsv_addr, rsv_size); |
| if (ret) |
| return -ENOSPC; |
| |
| printf(" Reserved memory region for DRAM PHY training: addr=%lx size=%lx\n", |
| rsv_addr, rsv_size); |
| } |
| |
| return 0; |
| } |
| #endif |