| /* |
| * linux/include/asm-arm/arch-pxa/pxa-regs.h |
| * |
| * Author: Nicolas Pitre |
| * Created: Jun 15, 2001 |
| * Copyright: MontaVista Software Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * - 2003/01/20: Robert Schwebel <r.schwebel@pengutronix.de |
| * Original file taken from linux-2.4.19-rmk4-pxa1. Added some definitions. |
| * Added include for hardware.h (for __REG definition) |
| */ |
| #ifndef _PXA_REGS_H_ |
| #define _PXA_REGS_H_ |
| |
| #include "bitfield.h" |
| #include "hardware.h" |
| |
| /* FIXME hack so that SA-1111.h will work [cb] */ |
| |
| #ifndef __ASSEMBLY__ |
| typedef unsigned short Word16 ; |
| typedef unsigned int Word32 ; |
| typedef Word32 Word ; |
| typedef Word Quad [4] ; |
| typedef void *Address ; |
| typedef void (*ExcpHndlr) (void) ; |
| #endif |
| |
| /* |
| * PXA Chip selects |
| */ |
| #ifdef CONFIG_CPU_MONAHANS |
| #define PXA_CS0_PHYS 0x00000000 /* for both small and large same start */ |
| #define PXA_CS1_PHYS 0x04000000 /* Small partition start address (64MB) */ |
| #define PXA_CS1_LPHYS 0x30000000 /* Large partition start address (256MB) */ |
| #define PXA_CS2_PHYS 0x10000000 /* (64MB) */ |
| #define PXA_CS3_PHYS 0x14000000 /* (64MB) */ |
| #define PXA_PCMCIA_PHYS 0x20000000 /* (256MB) */ |
| #else |
| #define PXA_CS0_PHYS 0x00000000 |
| #define PXA_CS1_PHYS 0x04000000 |
| #define PXA_CS2_PHYS 0x08000000 |
| #define PXA_CS3_PHYS 0x0C000000 |
| #define PXA_CS4_PHYS 0x10000000 |
| #define PXA_CS5_PHYS 0x14000000 |
| #endif /* CONFIG_CPU_MONAHANS */ |
| |
| /* |
| * Personal Computer Memory Card International Association (PCMCIA) sockets |
| */ |
| #define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */ |
| #define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */ |
| #define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */ |
| #define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */ |
| #define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ |
| |
| #ifndef CONFIG_CPU_MONAHANS /* Monahans supports only one slot */ |
| #define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ |
| #define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ |
| #define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */ |
| #define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ |
| #endif |
| |
| #define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ |
| #define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ |
| #define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */ |
| #define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */ |
| |
| #define _PCMCIA(Nb) /* PCMCIA [0..1] */ \ |
| (0x20000000 + (Nb)*PCMCIASp) |
| #define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */ |
| #define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \ |
| (_PCMCIA (Nb) + 2*PCMCIAPrtSp) |
| #define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \ |
| (_PCMCIA (Nb) + 3*PCMCIAPrtSp) |
| |
| #define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */ |
| #define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */ |
| #define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */ |
| #define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */ |
| |
| #ifndef CONFIG_CPU_MONAHANS /* Monahans supports only one slot */ |
| #define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */ |
| #define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */ |
| #define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */ |
| #define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */ |
| #endif |
| |
| /* |
| * DMA Controller |
| */ |
| #define DCSR0 __REG(0x40000000) /* DMA Control / Status Register for Channel 0 */ |
| #define DCSR1 __REG(0x40000004) /* DMA Control / Status Register for Channel 1 */ |
| #define DCSR2 __REG(0x40000008) /* DMA Control / Status Register for Channel 2 */ |
| #define DCSR3 __REG(0x4000000c) /* DMA Control / Status Register for Channel 3 */ |
| #define DCSR4 __REG(0x40000010) /* DMA Control / Status Register for Channel 4 */ |
| #define DCSR5 __REG(0x40000014) /* DMA Control / Status Register for Channel 5 */ |
| #define DCSR6 __REG(0x40000018) /* DMA Control / Status Register for Channel 6 */ |
| #define DCSR7 __REG(0x4000001c) /* DMA Control / Status Register for Channel 7 */ |
| #define DCSR8 __REG(0x40000020) /* DMA Control / Status Register for Channel 8 */ |
| #define DCSR9 __REG(0x40000024) /* DMA Control / Status Register for Channel 9 */ |
| #define DCSR10 __REG(0x40000028) /* DMA Control / Status Register for Channel 10 */ |
| #define DCSR11 __REG(0x4000002c) /* DMA Control / Status Register for Channel 11 */ |
| #define DCSR12 __REG(0x40000030) /* DMA Control / Status Register for Channel 12 */ |
| #define DCSR13 __REG(0x40000034) /* DMA Control / Status Register for Channel 13 */ |
| #define DCSR14 __REG(0x40000038) /* DMA Control / Status Register for Channel 14 */ |
| #define DCSR15 __REG(0x4000003c) /* DMA Control / Status Register for Channel 15 */ |
| #ifdef CONFIG_CPU_MONAHANS |
| #define DCSR16 __REG(0x40000040) /* DMA Control / Status Register for Channel 16 */ |
| #define DCSR17 __REG(0x40000044) /* DMA Control / Status Register for Channel 17 */ |
| #define DCSR18 __REG(0x40000048) /* DMA Control / Status Register for Channel 18 */ |
| #define DCSR19 __REG(0x4000004c) /* DMA Control / Status Register for Channel 19 */ |
| #define DCSR20 __REG(0x40000050) /* DMA Control / Status Register for Channel 20 */ |
| #define DCSR21 __REG(0x40000054) /* DMA Control / Status Register for Channel 21 */ |
| #define DCSR22 __REG(0x40000058) /* DMA Control / Status Register for Channel 22 */ |
| #define DCSR23 __REG(0x4000005c) /* DMA Control / Status Register for Channel 23 */ |
| #define DCSR24 __REG(0x40000060) /* DMA Control / Status Register for Channel 24 */ |
| #define DCSR25 __REG(0x40000064) /* DMA Control / Status Register for Channel 25 */ |
| #define DCSR26 __REG(0x40000068) /* DMA Control / Status Register for Channel 26 */ |
| #define DCSR27 __REG(0x4000006c) /* DMA Control / Status Register for Channel 27 */ |
| #define DCSR28 __REG(0x40000070) /* DMA Control / Status Register for Channel 28 */ |
| #define DCSR29 __REG(0x40000074) /* DMA Control / Status Register for Channel 29 */ |
| #define DCSR30 __REG(0x40000078) /* DMA Control / Status Register for Channel 30 */ |
| #define DCSR31 __REG(0x4000007c) /* DMA Control / Status Register for Channel 31 */ |
| #endif /* CONFIG_CPU_MONAHANS */ |
| |
| #define DCSR(x) __REG2(0x40000000, (x) << 2) |
| |
| #define DCSR_RUN (1 << 31) /* Run Bit (read / write) */ |
| #define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */ |
| #define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */ |
| |
| #if defined(CONFIG_PXA27X) || defined (CONFIG_CPU_MONAHANS) |
| #define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */ |
| #define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ |
| #define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ |
| #define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */ |
| #define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */ |
| #define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */ |
| #define DCSR_ENRINTR (1 << 9) /* The end of Receive */ |
| #endif |
| |
| #define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ |
| #define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */ |
| #define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */ |
| #define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */ |
| #define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */ |
| |
| #define DINT __REG(0x400000f0) /* DMA Interrupt Register */ |
| |
| #define DRCMR0 __REG(0x40000100) /* Request to Channel Map Register for DREQ 0 */ |
| #define DRCMR1 __REG(0x40000104) /* Request to Channel Map Register for DREQ 1 */ |
| #define DRCMR2 __REG(0x40000108) /* Request to Channel Map Register for I2S receive Request */ |
| #define DRCMR3 __REG(0x4000010c) /* Request to Channel Map Register for I2S transmit Request */ |
| #define DRCMR4 __REG(0x40000110) /* Request to Channel Map Register for BTUART receive Request */ |
| #define DRCMR5 __REG(0x40000114) /* Request to Channel Map Register for BTUART transmit Request. */ |
| #define DRCMR6 __REG(0x40000118) /* Request to Channel Map Register for FFUART receive Request */ |
| #define DRCMR7 __REG(0x4000011c) /* Request to Channel Map Register for FFUART transmit Request */ |
| #define DRCMR8 __REG(0x40000120) /* Request to Channel Map Register for AC97 microphone Request */ |
| #define DRCMR9 __REG(0x40000124) /* Request to Channel Map Register for AC97 modem receive Request */ |
| #define DRCMR10 __REG(0x40000128) /* Request to Channel Map Register for AC97 modem transmit Request */ |
| #define DRCMR11 __REG(0x4000012c) /* Request to Channel Map Register for AC97 audio receive Request */ |
| #define DRCMR12 __REG(0x40000130) /* Request to Channel Map Register for AC97 audio transmit Request */ |
| #define DRCMR13 __REG(0x40000134) /* Request to Channel Map Register for SSP receive Request */ |
| #define DRCMR14 __REG(0x40000138) /* Request to Channel Map Register for SSP transmit Request */ |
| #define DRCMR15 __REG(0x4000013c) /* Reserved */ |
| #define DRCMR16 __REG(0x40000140) /* Reserved */ |
| #define DRCMR17 __REG(0x40000144) /* Request to Channel Map Register for ICP receive Request */ |
| #define DRCMR18 __REG(0x40000148) /* Request to Channel Map Register for ICP transmit Request */ |
| #define DRCMR19 __REG(0x4000014c) /* Request to Channel Map Register for STUART receive Request */ |
| #define DRCMR20 __REG(0x40000150) /* Request to Channel Map Register for STUART transmit Request */ |
| #define DRCMR21 __REG(0x40000154) /* Request to Channel Map Register for MMC receive Request */ |
| #define DRCMR22 __REG(0x40000158) /* Request to Channel Map Register for MMC transmit Request */ |
| #define DRCMR23 __REG(0x4000015c) /* Reserved */ |
| #define DRCMR24 __REG(0x40000160) /* Reserved */ |
| #define DRCMR25 __REG(0x40000164) /* Request to Channel Map Register for USB endpoint 1 Request */ |
| #define DRCMR26 __REG(0x40000168) /* Request to Channel Map Register for USB endpoint 2 Request */ |
| #define DRCMR27 __REG(0x4000016C) /* Request to Channel Map Register for USB endpoint 3 Request */ |
| #define DRCMR28 __REG(0x40000170) /* Request to Channel Map Register for USB endpoint 4 Request */ |
| #define DRCMR29 __REG(0x40000174) /* Reserved */ |
| #define DRCMR30 __REG(0x40000178) /* Request to Channel Map Register for USB endpoint 6 Request */ |
| #define DRCMR31 __REG(0x4000017C) /* Request to Channel Map Register for USB endpoint 7 Request */ |
| #define DRCMR32 __REG(0x40000180) /* Request to Channel Map Register for USB endpoint 8 Request */ |
| #define DRCMR33 __REG(0x40000184) /* Request to Channel Map Register for USB endpoint 9 Request */ |
| #define DRCMR34 __REG(0x40000188) /* Reserved */ |
| #define DRCMR35 __REG(0x4000018C) /* Request to Channel Map Register for USB endpoint 11 Request */ |
| #define DRCMR36 __REG(0x40000190) /* Request to Channel Map Register for USB endpoint 12 Request */ |
| #define DRCMR37 __REG(0x40000194) /* Request to Channel Map Register for USB endpoint 13 Request */ |
| #define DRCMR38 __REG(0x40000198) /* Request to Channel Map Register for USB endpoint 14 Request */ |
| #define DRCMR39 __REG(0x4000019C) /* Reserved */ |
| |
| #define DRCMR68 __REG(0x40001110) /* Request to Channel Map Register for Camera FIFO 0 Request */ |
| #define DRCMR69 __REG(0x40001114) /* Request to Channel Map Register for Camera FIFO 1 Request */ |
| #define DRCMR70 __REG(0x40001118) /* Request to Channel Map Register for Camera FIFO 2 Request */ |
| |
| #define DRCMRRXSADR DRCMR2 |
| #define DRCMRTXSADR DRCMR3 |
| #define DRCMRRXBTRBR DRCMR4 |
| #define DRCMRTXBTTHR DRCMR5 |
| #define DRCMRRXFFRBR DRCMR6 |
| #define DRCMRTXFFTHR DRCMR7 |
| #define DRCMRRXMCDR DRCMR8 |
| #define DRCMRRXMODR DRCMR9 |
| #define DRCMRTXMODR DRCMR10 |
| #define DRCMRRXPCDR DRCMR11 |
| #define DRCMRTXPCDR DRCMR12 |
| #define DRCMRRXSSDR DRCMR13 |
| #define DRCMRTXSSDR DRCMR14 |
| #define DRCMRRXICDR DRCMR17 |
| #define DRCMRTXICDR DRCMR18 |
| #define DRCMRRXSTRBR DRCMR19 |
| #define DRCMRTXSTTHR DRCMR20 |
| #define DRCMRRXMMC DRCMR21 |
| #define DRCMRTXMMC DRCMR22 |
| |
| #define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */ |
| #define DRCMR_CHLNUM 0x0f /* mask for Channel Number (read / write) */ |
| |
| #define DDADR0 __REG(0x40000200) /* DMA Descriptor Address Register Channel 0 */ |
| #define DSADR0 __REG(0x40000204) /* DMA Source Address Register Channel 0 */ |
| #define DTADR0 __REG(0x40000208) /* DMA Target Address Register Channel 0 */ |
| #define DCMD0 __REG(0x4000020c) /* DMA Command Address Register Channel 0 */ |
| #define DDADR1 __REG(0x40000210) /* DMA Descriptor Address Register Channel 1 */ |
| #define DSADR1 __REG(0x40000214) /* DMA Source Address Register Channel 1 */ |
| #define DTADR1 __REG(0x40000218) /* DMA Target Address Register Channel 1 */ |
| #define DCMD1 __REG(0x4000021c) /* DMA Command Address Register Channel 1 */ |
| #define DDADR2 __REG(0x40000220) /* DMA Descriptor Address Register Channel 2 */ |
| #define DSADR2 __REG(0x40000224) /* DMA Source Address Register Channel 2 */ |
| #define DTADR2 __REG(0x40000228) /* DMA Target Address Register Channel 2 */ |
| #define DCMD2 __REG(0x4000022c) /* DMA Command Address Register Channel 2 */ |
| #define DDADR3 __REG(0x40000230) /* DMA Descriptor Address Register Channel 3 */ |
| #define DSADR3 __REG(0x40000234) /* DMA Source Address Register Channel 3 */ |
| #define DTADR3 __REG(0x40000238) /* DMA Target Address Register Channel 3 */ |
| #define DCMD3 __REG(0x4000023c) /* DMA Command Address Register Channel 3 */ |
| #define DDADR4 __REG(0x40000240) /* DMA Descriptor Address Register Channel 4 */ |
| #define DSADR4 __REG(0x40000244) /* DMA Source Address Register Channel 4 */ |
| #define DTADR4 __REG(0x40000248) /* DMA Target Address Register Channel 4 */ |
| #define DCMD4 __REG(0x4000024c) /* DMA Command Address Register Channel 4 */ |
| #define DDADR5 __REG(0x40000250) /* DMA Descriptor Address Register Channel 5 */ |
| #define DSADR5 __REG(0x40000254) /* DMA Source Address Register Channel 5 */ |
| #define DTADR5 __REG(0x40000258) /* DMA Target Address Register Channel 5 */ |
| #define DCMD5 __REG(0x4000025c) /* DMA Command Address Register Channel 5 */ |
| #define DDADR6 __REG(0x40000260) /* DMA Descriptor Address Register Channel 6 */ |
| #define DSADR6 __REG(0x40000264) /* DMA Source Address Register Channel 6 */ |
| #define DTADR6 __REG(0x40000268) /* DMA Target Address Register Channel 6 */ |
| #define DCMD6 __REG(0x4000026c) /* DMA Command Address Register Channel 6 */ |
| #define DDADR7 __REG(0x40000270) /* DMA Descriptor Address Register Channel 7 */ |
| #define DSADR7 __REG(0x40000274) /* DMA Source Address Register Channel 7 */ |
| #define DTADR7 __REG(0x40000278) /* DMA Target Address Register Channel 7 */ |
| #define DCMD7 __REG(0x4000027c) /* DMA Command Address Register Channel 7 */ |
| #define DDADR8 __REG(0x40000280) /* DMA Descriptor Address Register Channel 8 */ |
| #define DSADR8 __REG(0x40000284) /* DMA Source Address Register Channel 8 */ |
| #define DTADR8 __REG(0x40000288) /* DMA Target Address Register Channel 8 */ |
| #define DCMD8 __REG(0x4000028c) /* DMA Command Address Register Channel 8 */ |
| #define DDADR9 __REG(0x40000290) /* DMA Descriptor Address Register Channel 9 */ |
| #define DSADR9 __REG(0x40000294) /* DMA Source Address Register Channel 9 */ |
| #define DTADR9 __REG(0x40000298) /* DMA Target Address Register Channel 9 */ |
| #define DCMD9 __REG(0x4000029c) /* DMA Command Address Register Channel 9 */ |
| #define DDADR10 __REG(0x400002a0) /* DMA Descriptor Address Register Channel 10 */ |
| #define DSADR10 __REG(0x400002a4) /* DMA Source Address Register Channel 10 */ |
| #define DTADR10 __REG(0x400002a8) /* DMA Target Address Register Channel 10 */ |
| #define DCMD10 __REG(0x400002ac) /* DMA Command Address Register Channel 10 */ |
| #define DDADR11 __REG(0x400002b0) /* DMA Descriptor Address Register Channel 11 */ |
| #define DSADR11 __REG(0x400002b4) /* DMA Source Address Register Channel 11 */ |
| #define DTADR11 __REG(0x400002b8) /* DMA Target Address Register Channel 11 */ |
| #define DCMD11 __REG(0x400002bc) /* DMA Command Address Register Channel 11 */ |
| #define DDADR12 __REG(0x400002c0) /* DMA Descriptor Address Register Channel 12 */ |
| #define DSADR12 __REG(0x400002c4) /* DMA Source Address Register Channel 12 */ |
| #define DTADR12 __REG(0x400002c8) /* DMA Target Address Register Channel 12 */ |
| #define DCMD12 __REG(0x400002cc) /* DMA Command Address Register Channel 12 */ |
| #define DDADR13 __REG(0x400002d0) /* DMA Descriptor Address Register Channel 13 */ |
| #define DSADR13 __REG(0x400002d4) /* DMA Source Address Register Channel 13 */ |
| #define DTADR13 __REG(0x400002d8) /* DMA Target Address Register Channel 13 */ |
| #define DCMD13 __REG(0x400002dc) /* DMA Command Address Register Channel 13 */ |
| #define DDADR14 __REG(0x400002e0) /* DMA Descriptor Address Register Channel 14 */ |
| #define DSADR14 __REG(0x400002e4) /* DMA Source Address Register Channel 14 */ |
| #define DTADR14 __REG(0x400002e8) /* DMA Target Address Register Channel 14 */ |
| #define DCMD14 __REG(0x400002ec) /* DMA Command Address Register Channel 14 */ |
| #define DDADR15 __REG(0x400002f0) /* DMA Descriptor Address Register Channel 15 */ |
| #define DSADR15 __REG(0x400002f4) /* DMA Source Address Register Channel 15 */ |
| #define DTADR15 __REG(0x400002f8) /* DMA Target Address Register Channel 15 */ |
| #define DCMD15 __REG(0x400002fc) /* DMA Command Address Register Channel 15 */ |
| |
| #define DDADR(x) __REG2(0x40000200, (x) << 4) |
| #define DSADR(x) __REG2(0x40000204, (x) << 4) |
| #define DTADR(x) __REG2(0x40000208, (x) << 4) |
| #define DCMD(x) __REG2(0x4000020c, (x) << 4) |
| |
| #define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */ |
| #define DDADR_STOP (1 << 0) /* Stop (read / write) */ |
| |
| #define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */ |
| #define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */ |
| #define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */ |
| #define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */ |
| #define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ |
| #define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */ |
| #define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */ |
| #define DCMD_BURST8 (1 << 16) /* 8 byte burst */ |
| #define DCMD_BURST16 (2 << 16) /* 16 byte burst */ |
| #define DCMD_BURST32 (3 << 16) /* 32 byte burst */ |
| #define DCMD_WIDTH1 (1 << 14) /* 1 byte width */ |
| #define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */ |
| #define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */ |
| #define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ |
| |
| /* default combinations */ |
| #define DCMD_RXPCDR (DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4) |
| #define DCMD_RXMCDR (DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4) |
| #define DCMD_TXPCDR (DCMD_INCSRCADDR|DCMD_FLOWTRG|DCMD_BURST32|DCMD_WIDTH4) |
| |
| /* |
| * UARTs |
| */ |
| /* Full Function UART (FFUART) */ |
| #define FFUART FFRBR |
| #define FFRBR __REG(0x40100000) /* Receive Buffer Register (read only) */ |
| #define FFTHR __REG(0x40100000) /* Transmit Holding Register (write only) */ |
| #define FFIER __REG(0x40100004) /* Interrupt Enable Register (read/write) */ |
| #define FFIIR __REG(0x40100008) /* Interrupt ID Register (read only) */ |
| #define FFFCR __REG(0x40100008) /* FIFO Control Register (write only) */ |
| #define FFLCR __REG(0x4010000C) /* Line Control Register (read/write) */ |
| #define FFMCR __REG(0x40100010) /* Modem Control Register (read/write) */ |
| #define FFLSR __REG(0x40100014) /* Line Status Register (read only) */ |
| #define FFMSR __REG(0x40100018) /* Modem Status Register (read only) */ |
| #define FFSPR __REG(0x4010001C) /* Scratch Pad Register (read/write) */ |
| #define FFISR __REG(0x40100020) /* Infrared Selection Register (read/write) */ |
| #define FFDLL __REG(0x40100000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ |
| #define FFDLH __REG(0x40100004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ |
| |
| /* Bluetooth UART (BTUART) */ |
| #define BTUART BTRBR |
| #define BTRBR __REG(0x40200000) /* Receive Buffer Register (read only) */ |
| #define BTTHR __REG(0x40200000) /* Transmit Holding Register (write only) */ |
| #define BTIER __REG(0x40200004) /* Interrupt Enable Register (read/write) */ |
| #define BTIIR __REG(0x40200008) /* Interrupt ID Register (read only) */ |
| #define BTFCR __REG(0x40200008) /* FIFO Control Register (write only) */ |
| #define BTLCR __REG(0x4020000C) /* Line Control Register (read/write) */ |
| #define BTMCR __REG(0x40200010) /* Modem Control Register (read/write) */ |
| #define BTLSR __REG(0x40200014) /* Line Status Register (read only) */ |
| #define BTMSR __REG(0x40200018) /* Modem Status Register (read only) */ |
| #define BTSPR __REG(0x4020001C) /* Scratch Pad Register (read/write) */ |
| #define BTISR __REG(0x40200020) /* Infrared Selection Register (read/write) */ |
| #define BTDLL __REG(0x40200000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ |
| #define BTDLH __REG(0x40200004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ |
| |
| /* Standard UART (STUART) */ |
| #define STUART STRBR |
| #define STRBR __REG(0x40700000) /* Receive Buffer Register (read only) */ |
| #define STTHR __REG(0x40700000) /* Transmit Holding Register (write only) */ |
| #define STIER __REG(0x40700004) /* Interrupt Enable Register (read/write) */ |
| #define STIIR __REG(0x40700008) /* Interrupt ID Register (read only) */ |
| #define STFCR __REG(0x40700008) /* FIFO Control Register (write only) */ |
| #define STLCR __REG(0x4070000C) /* Line Control Register (read/write) */ |
| #define STMCR __REG(0x40700010) /* Modem Control Register (read/write) */ |
| #define STLSR __REG(0x40700014) /* Line Status Register (read only) */ |
| #define STMSR __REG(0x40700018) /* Reserved */ |
| #define STSPR __REG(0x4070001C) /* Scratch Pad Register (read/write) */ |
| #define STISR __REG(0x40700020) /* Infrared Selection Register (read/write) */ |
| #define STDLL __REG(0x40700000) /* Divisor Latch Low Register (DLAB = 1) (read/write) */ |
| #define STDLH __REG(0x40700004) /* Divisor Latch High Register (DLAB = 1) (read/write) */ |
| |
| #define IER_DMAE (1 << 7) /* DMA Requests Enable */ |
| #define IER_UUE (1 << 6) /* UART Unit Enable */ |
| #define IER_NRZE (1 << 5) /* NRZ coding Enable */ |
| #define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */ |
| #define IER_MIE (1 << 3) /* Modem Interrupt Enable */ |
| #define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */ |
| #define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */ |
| #define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */ |
| |
| #define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */ |
| #define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */ |
| #define IIR_TOD (1 << 3) /* Time Out Detected */ |
| #define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */ |
| #define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */ |
| #define IIR_IP (1 << 0) /* Interrupt Pending (active low) */ |
| |
| #define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */ |
| #define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */ |
| #define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */ |
| #define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */ |
| #define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */ |
| #define FCR_ITL_1 (0) |
| #define FCR_ITL_8 (FCR_ITL1) |
| #define FCR_ITL_16 (FCR_ITL2) |
| #define FCR_ITL_32 (FCR_ITL2|FCR_ITL1) |
| |
| #define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */ |
| #define LCR_SB (1 << 6) /* Set Break */ |
| #define LCR_STKYP (1 << 5) /* Sticky Parity */ |
| #define LCR_EPS (1 << 4) /* Even Parity Select */ |
| #define LCR_PEN (1 << 3) /* Parity Enable */ |
| #define LCR_STB (1 << 2) /* Stop Bit */ |
| #define LCR_WLS1 (1 << 1) /* Word Length Select */ |
| #define LCR_WLS0 (1 << 0) /* Word Length Select */ |
| |
| #define LSR_FIFOE (1 << 7) /* FIFO Error Status */ |
| #define LSR_TEMT (1 << 6) /* Transmitter Empty */ |
| #define LSR_TDRQ (1 << 5) /* Transmit Data Request */ |
| #define LSR_BI (1 << 4) /* Break Interrupt */ |
| #define LSR_FE (1 << 3) /* Framing Error */ |
| #define LSR_PE (1 << 2) /* Parity Error */ |
| #define LSR_OE (1 << 1) /* Overrun Error */ |
| #define LSR_DR (1 << 0) /* Data Ready */ |
| |
| #define MCR_LOOP (1 << 4) */ |
| #define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */ |
| #define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */ |
| #define MCR_RTS (1 << 1) /* Request to Send */ |
| #define MCR_DTR (1 << 0) /* Data Terminal Ready */ |
| |
| #define MSR_DCD (1 << 7) /* Data Carrier Detect */ |
| #define MSR_RI (1 << 6) /* Ring Indicator */ |
| #define MSR_DSR (1 << 5) /* Data Set Ready */ |
| #define MSR_CTS (1 << 4) /* Clear To Send */ |
| #define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */ |
| #define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */ |
| #define MSR_DDSR (1 << 1) /* Delta Data Set Ready */ |
| #define MSR_DCTS (1 << 0) /* Delta Clear To Send */ |
| |
| /* |
| * IrSR (Infrared Selection Register) |
| */ |
| #define IrSR_OFFSET 0x20 |
| |
| #define IrSR_RXPL_NEG_IS_ZERO (1<<4) |
| #define IrSR_RXPL_POS_IS_ZERO 0x0 |
| #define IrSR_TXPL_NEG_IS_ZERO (1<<3) |
| #define IrSR_TXPL_POS_IS_ZERO 0x0 |
| #define IrSR_XMODE_PULSE_1_6 (1<<2) |
| #define IrSR_XMODE_PULSE_3_16 0x0 |
| #define IrSR_RCVEIR_IR_MODE (1<<1) |
| #define IrSR_RCVEIR_UART_MODE 0x0 |
| #define IrSR_XMITIR_IR_MODE (1<<0) |
| #define IrSR_XMITIR_UART_MODE 0x0 |
| |
| #define IrSR_IR_RECEIVE_ON (\ |
| IrSR_RXPL_NEG_IS_ZERO | \ |
| IrSR_TXPL_POS_IS_ZERO | \ |
| IrSR_XMODE_PULSE_3_16 | \ |
| IrSR_RCVEIR_IR_MODE | \ |
| IrSR_XMITIR_UART_MODE) |
| |
| #define IrSR_IR_TRANSMIT_ON (\ |
| IrSR_RXPL_NEG_IS_ZERO | \ |
| IrSR_TXPL_POS_IS_ZERO | \ |
| IrSR_XMODE_PULSE_3_16 | \ |
| IrSR_RCVEIR_UART_MODE | \ |
| IrSR_XMITIR_IR_MODE) |
| |
| /* |
| * I2C registers |
| */ |
| #define IBMR __REG(0x40301680) /* I2C Bus Monitor Register - IBMR */ |
| #define IDBR __REG(0x40301688) /* I2C Data Buffer Register - IDBR */ |
| #define ICR __REG(0x40301690) /* I2C Control Register - ICR */ |
| #define ISR __REG(0x40301698) /* I2C Status Register - ISR */ |
| #define ISAR __REG(0x403016A0) /* I2C Slave Address Register - ISAR */ |
| |
| #define PWRIBMR __REG(0x40f00180) /* Power I2C Bus Monitor Register-IBMR */ |
| #define PWRIDBR __REG(0x40f00188) /* Power I2C Data Buffer Register-IDBR */ |
| #define PWRICR __REG(0x40f00190) /* Power I2C Control Register - ICR */ |
| #define PWRISR __REG(0x40f00198) /* Power I2C Status Register - ISR */ |
| #define PWRISAR __REG(0x40f001A0) /* Power I2C Slave Address Register-ISAR */ |
| |
| /* ----- Control register bits ---------------------------------------- */ |
| |
| #define ICR_START 0x1 /* start bit */ |
| #define ICR_STOP 0x2 /* stop bit */ |
| #define ICR_ACKNAK 0x4 /* send ACK(0) or NAK(1) */ |
| #define ICR_TB 0x8 /* transfer byte bit */ |
| #define ICR_MA 0x10 /* master abort */ |
| #define ICR_SCLE 0x20 /* master clock enable, mona SCLEA */ |
| #define ICR_IUE 0x40 /* unit enable */ |
| #define ICR_GCD 0x80 /* general call disable */ |
| #define ICR_ITEIE 0x100 /* enable tx interrupts */ |
| #define ICR_IRFIE 0x200 /* enable rx interrupts, mona: DRFIE */ |
| #define ICR_BEIE 0x400 /* enable bus error ints */ |
| #define ICR_SSDIE 0x800 /* slave STOP detected int enable */ |
| #define ICR_ALDIE 0x1000 /* enable arbitration interrupt */ |
| #define ICR_SADIE 0x2000 /* slave address detected int enable */ |
| #define ICR_UR 0x4000 /* unit reset */ |
| #define ICR_FM 0x8000 /* Fast Mode */ |
| |
| /* ----- Status register bits ----------------------------------------- */ |
| |
| #define ISR_RWM 0x1 /* read/write mode */ |
| #define ISR_ACKNAK 0x2 /* ack/nak status */ |
| #define ISR_UB 0x4 /* unit busy */ |
| #define ISR_IBB 0x8 /* bus busy */ |
| #define ISR_SSD 0x10 /* slave stop detected */ |
| #define ISR_ALD 0x20 /* arbitration loss detected */ |
| #define ISR_ITE 0x40 /* tx buffer empty */ |
| #define ISR_IRF 0x80 /* rx buffer full */ |
| #define ISR_GCAD 0x100 /* general call address detected */ |
| #define ISR_SAD 0x200 /* slave address detected */ |
| #define ISR_BED 0x400 /* bus error no ACK/NAK */ |
| |
| /* |
| * Serial Audio Controller |
| */ |
| /* FIXME the audio defines collide w/ the SA1111 defines. I don't like these |
| * short defines because there is too much chance of namespace collision |
| */ |
| /*#define SACR0 __REG(0x40400000) / Global Control Register */ |
| /*#define SACR1 __REG(0x40400004) / Serial Audio I 2 S/MSB-Justified Control Register */ |
| /*#define SASR0 __REG(0x4040000C) / Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */ |
| /*#define SAIMR __REG(0x40400014) / Serial Audio Interrupt Mask Register */ |
| /*#define SAICR __REG(0x40400018) / Serial Audio Interrupt Clear Register */ |
| /*#define SADIV __REG(0x40400060) / Audio Clock Divider Register. */ |
| /*#define SADR __REG(0x40400080) / Serial Audio Data Register (TX and RX FIFO access Register). */ |
| |
| |
| /* |
| * AC97 Controller registers |
| */ |
| #define POCR __REG(0x40500000) /* PCM Out Control Register */ |
| #define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ |
| |
| #define PICR __REG(0x40500004) /* PCM In Control Register */ |
| #define PICR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ |
| |
| #define MCCR __REG(0x40500008) /* Mic In Control Register */ |
| #define MCCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ |
| |
| #define GCR __REG(0x4050000C) /* Global Control Register */ |
| #define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */ |
| #define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */ |
| #define GCR_SECRDY_IEN (1 << 9) /* Secondary Ready Interrupt Enable */ |
| #define GCR_PRIRDY_IEN (1 << 8) /* Primary Ready Interrupt Enable */ |
| #define GCR_SECRES_IEN (1 << 5) /* Secondary Resume Interrupt Enable */ |
| #define GCR_PRIRES_IEN (1 << 4) /* Primary Resume Interrupt Enable */ |
| #define GCR_ACLINK_OFF (1 << 3) /* AC-link Shut Off */ |
| #define GCR_WARM_RST (1 << 2) /* AC97 Warm Reset */ |
| #define GCR_COLD_RST (1 << 1) /* AC'97 Cold Reset (0 = active) */ |
| #define GCR_GIE (1 << 0) /* Codec GPI Interrupt Enable */ |
| |
| #define POSR __REG(0x40500010) /* PCM Out Status Register */ |
| #define POSR_FIFOE (1 << 4) /* FIFO error */ |
| |
| #define PISR __REG(0x40500014) /* PCM In Status Register */ |
| #define PISR_FIFOE (1 << 4) /* FIFO error */ |
| |
| #define MCSR __REG(0x40500018) /* Mic In Status Register */ |
| #define MCSR_FIFOE (1 << 4) /* FIFO error */ |
| |
| #define GSR __REG(0x4050001C) /* Global Status Register */ |
| #define GSR_CDONE (1 << 19) /* Command Done */ |
| #define GSR_SDONE (1 << 18) /* Status Done */ |
| #define GSR_RDCS (1 << 15) /* Read Completion Status */ |
| #define GSR_BIT3SLT12 (1 << 14) /* Bit 3 of slot 12 */ |
| #define GSR_BIT2SLT12 (1 << 13) /* Bit 2 of slot 12 */ |
| #define GSR_BIT1SLT12 (1 << 12) /* Bit 1 of slot 12 */ |
| #define GSR_SECRES (1 << 11) /* Secondary Resume Interrupt */ |
| #define GSR_PRIRES (1 << 10) /* Primary Resume Interrupt */ |
| #define GSR_SCR (1 << 9) /* Secondary Codec Ready */ |
| #define GSR_PCR (1 << 8) /* Primary Codec Ready */ |
| #define GSR_MINT (1 << 7) /* Mic In Interrupt */ |
| #define GSR_POINT (1 << 6) /* PCM Out Interrupt */ |
| #define GSR_PIINT (1 << 5) /* PCM In Interrupt */ |
| #define GSR_MOINT (1 << 2) /* Modem Out Interrupt */ |
| #define GSR_MIINT (1 << 1) /* Modem In Interrupt */ |
| #define GSR_GSCI (1 << 0) /* Codec GPI Status Change Interrupt */ |
| |
| #define CAR __REG(0x40500020) /* CODEC Access Register */ |
| #define CAR_CAIP (1 << 0) /* Codec Access In Progress */ |
| |
| #define PCDR __REG(0x40500040) /* PCM FIFO Data Register */ |
| #define MCDR __REG(0x40500060) /* Mic-in FIFO Data Register */ |
| |
| #define MOCR __REG(0x40500100) /* Modem Out Control Register */ |
| #define MOCR_FEIE (1 << 3) /* FIFO Error */ |
| |
| #define MICR __REG(0x40500108) /* Modem In Control Register */ |
| #define MICR_FEIE (1 << 3) /* FIFO Error */ |
| |
| #define MOSR __REG(0x40500110) /* Modem Out Status Register */ |
| #define MOSR_FIFOE (1 << 4) /* FIFO error */ |
| |
| #define MISR __REG(0x40500118) /* Modem In Status Register */ |
| #define MISR_FIFOE (1 << 4) /* FIFO error */ |
| |
| #define MODR __REG(0x40500140) /* Modem FIFO Data Register */ |
| |
| #define PAC_REG_BASE __REG(0x40500200) /* Primary Audio Codec */ |
| #define SAC_REG_BASE __REG(0x40500300) /* Secondary Audio Codec */ |
| #define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */ |
| #define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */ |
| |
| |
| /* |
| * USB Device Controller |
| */ |
| #ifdef CONFIG_PXA27X |
| |
| #define UDCCR __REG(0x40600000) /* UDC Control Register */ |
| #define UDCCR_UDE (1 << 0) /* UDC enable */ |
| #define UDCCR_UDA (1 << 1) /* UDC active */ |
| #define UDCCR_RSM (1 << 2) /* Device resume */ |
| #define UDCCR_EMCE (1 << 3) /* Endpoint Memory Configuration Error */ |
| #define UDCCR_SMAC (1 << 4) /* Switch Endpoint Memory to Active Configuration */ |
| #define UDCCR_RESIR (1 << 29) /* Resume interrupt request */ |
| #define UDCCR_SUSIR (1 << 28) /* Suspend interrupt request */ |
| #define UDCCR_SM (1 << 28) /* Suspend interrupt mask */ |
| #define UDCCR_RSTIR (1 << 27) /* Reset interrupt request */ |
| #define UDCCR_REM (1 << 27) /* Reset interrupt mask */ |
| #define UDCCR_RM (1 << 29) /* resume interrupt mask */ |
| #define UDCCR_SRM (UDCCR_SM|UDCCR_RM) |
| #define UDCCR_OEN (1 << 31) /* On-the-Go Enable */ |
| #define UDCCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation Protocol Port Support */ |
| #define UDCCR_AHNP (1 << 29) /* A-device Host Negotiation Protocol Support */ |
| #define UDCCR_BHNP (1 << 28) /* B-device Host Negotiation Protocol Enable */ |
| #define UDCCR_DWRE (1 << 16) /* Device Remote Wake-up Enable */ |
| #define UDCCR_ACN (0x03 << 11) /* Active UDC configuration Number */ |
| #define UDCCR_ACN_S 11 |
| #define UDCCR_AIN (0x07 << 8) /* Active UDC interface Number */ |
| #define UDCCR_AIN_S 8 |
| #define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate Interface Setting Number */ |
| #define UDCCR_AAISN_S 5 |
| |
| #define UDCCS0 __REG(0x40600100) /* UDC Endpoint 0 Control/Status Register */ |
| #define UDCCS0_OPR (1 << 0) /* OUT packet ready */ |
| #define UDCCS0_IPR (1 << 1) /* IN packet ready */ |
| #define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */ |
| #define UDCCS0_DRWF (1 << 16) /* Device remote wakeup feature */ |
| #define UDCCS0_SST (1 << 4) /* Sent stall */ |
| #define UDCCS0_FST (1 << 5) /* Force stall */ |
| #define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */ |
| #define UDCCS0_SA (1 << 7) /* Setup active */ |
| |
| /* Bulk IN - Endpoint 1,6,11 */ |
| #define UDCCS1 __REG(0x40600104) /* UDC Endpoint 1 (IN) Control/Status Register */ |
| #define UDCCS6 __REG(0x40600028) /* UDC Endpoint 6 (IN) Control/Status Register */ |
| #define UDCCS11 __REG(0x4060003C) /* UDC Endpoint 11 (IN) Control/Status Register */ |
| |
| #define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */ |
| #define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */ |
| #define UDCCS_BI_FTF (1 << 8) /* Flush Tx FIFO */ |
| #define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */ |
| #define UDCCS_BI_SST (1 << 4) /* Sent stall */ |
| #define UDCCS_BI_FST (1 << 5) /* Force stall */ |
| #define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */ |
| |
| /* Bulk OUT - Endpoint 2,7,12 */ |
| #define UDCCS2 __REG(0x40600108) /* UDC Endpoint 2 (OUT) Control/Status Register */ |
| #define UDCCS7 __REG(0x4060002C) /* UDC Endpoint 7 (OUT) Control/Status Register */ |
| #define UDCCS12 __REG(0x40600040) /* UDC Endpoint 12 (OUT) Control/Status Register */ |
| |
| #define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */ |
| #define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */ |
| #define UDCCS_BO_DME (1 << 3) /* DMA enable */ |
| #define UDCCS_BO_SST (1 << 4) /* Sent stall */ |
| #define UDCCS_BO_FST (1 << 5) /* Force stall */ |
| #define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */ |
| #define UDCCS_BO_RSP (1 << 7) /* Receive short packet */ |
| |
| /* Isochronous IN - Endpoint 3,8,13 */ |
| #define UDCCS3 __REG(0x4060001C) /* UDC Endpoint 3 (IN) Control/Status Register */ |
| #define UDCCS8 __REG(0x40600030) /* UDC Endpoint 8 (IN) Control/Status Register */ |
| #define UDCCS13 __REG(0x40600044) /* UDC Endpoint 13 (IN) Control/Status Register */ |
| |
| #define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */ |
| #define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */ |
| #define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */ |
| #define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */ |
| #define UDCCS_II_TSP (1 << 7) /* Transmit short packet */ |
| |
| /* Isochronous OUT - Endpoint 4,9,14 */ |
| #define UDCCS4 __REG(0x40600020) /* UDC Endpoint 4 (OUT) Control/Status Register */ |
| #define UDCCS9 __REG(0x40600034) /* UDC Endpoint 9 (OUT) Control/Status Register */ |
| #define UDCCS14 __REG(0x40600048) /* UDC Endpoint 14 (OUT) Control/Status Register */ |
| |
| #define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */ |
| #define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */ |
| #define UDCCS_IO_ROF (1 << 3) /* Receive overflow */ |
| #define UDCCS_IO_DME (1 << 3) /* DMA enable */ |
| #define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */ |
| #define UDCCS_IO_RSP (1 << 7) /* Receive short packet */ |
| |
| /* Interrupt IN - Endpoint 5,10,15 */ |
| #define UDCCS5 __REG(0x40600024) /* UDC Endpoint 5 (Interrupt) Control/Status Register */ |
| #define UDCCS10 __REG(0x40600038) /* UDC Endpoint 10 (Interrupt) Control/Status Register */ |
| #define UDCCS15 __REG(0x4060004C) /* UDC Endpoint 15 (Interrupt) Control/Status Register */ |
| |
| #define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */ |
| #define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */ |
| #define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */ |
| #define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */ |
| #define UDCCS_INT_SST (1 << 4) /* Sent stall */ |
| #define UDCCS_INT_FST (1 << 5) /* Force stall */ |
| #define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */ |
| |
| #define UFNRH __REG(0x40600060) /* UDC Frame Number Register High */ |
| #define UFNRL __REG(0x40600014) /* UDC Frame Number Register Low */ |
| #define UBCR2 __REG(0x40600208) /* UDC Byte Count Reg 2 */ |
| #define UBCR4 __REG(0x4060006c) /* UDC Byte Count Reg 4 */ |
| #define UBCR7 __REG(0x40600070) /* UDC Byte Count Reg 7 */ |
| #define UBCR9 __REG(0x40600074) /* UDC Byte Count Reg 9 */ |
| #define UBCR12 __REG(0x40600078) /* UDC Byte Count Reg 12 */ |
| #define UBCR14 __REG(0x4060007c) /* UDC Byte Count Reg 14 */ |
| #define UDDR0 __REG(0x40600300) /* UDC Endpoint 0 Data Register */ |
| #define UDDR1 __REG(0x40600304) /* UDC Endpoint 1 Data Register */ |
| #define UDDR2 __REG(0x40600308) /* UDC Endpoint 2 Data Register */ |
| #define UDDR3 __REG(0x40600200) /* UDC Endpoint 3 Data Register */ |
| #define UDDR4 __REG(0x40600400) /* UDC Endpoint 4 Data Register */ |
| #define UDDR5 __REG(0x406000A0) /* UDC Endpoint 5 Data Register */ |
| #define UDDR6 __REG(0x40600600) /* UDC Endpoint 6 Data Register */ |
| #define UDDR7 __REG(0x40600680) /* UDC Endpoint 7 Data Register */ |
| #define UDDR8 __REG(0x40600700) /* UDC Endpoint 8 Data Register */ |
| #define UDDR9 __REG(0x40600900) /* UDC Endpoint 9 Data Register */ |
| #define UDDR10 __REG(0x406000C0) /* UDC Endpoint 10 Data Register */ |
| #define UDDR11 __REG(0x40600B00) /* UDC Endpoint 11 Data Register */ |
| #define UDDR12 __REG(0x40600B80) /* UDC Endpoint 12 Data Register */ |
| #define UDDR13 __REG(0x40600C00) /* UDC Endpoint 13 Data Register */ |
| #define UDDR14 __REG(0x40600E00) /* UDC Endpoint 14 Data Register */ |
| #define UDDR15 __REG(0x406000E0) /* UDC Endpoint 15 Data Register */ |
| |
| #define UICR0 __REG(0x40600004) /* UDC Interrupt Control Register 0 */ |
| |
| #define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */ |
| #define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */ |
| #define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */ |
| #define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */ |
| #define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */ |
| #define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */ |
| #define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */ |
| #define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */ |
| |
| #define UICR1 __REG(0x40600008) /* UDC Interrupt Control Register 1 */ |
| |
| #define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */ |
| #define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */ |
| #define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */ |
| #define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */ |
| #define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */ |
| #define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */ |
| #define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */ |
| #define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */ |
| |
| #define USIR0 __REG(0x4060000C) /* UDC Status Interrupt Register 0 */ |
| |
| #define USIR0_IR0 (1 << 0) /* Interrup request ep 0 */ |
| #define USIR0_IR1 (1 << 2) /* Interrup request ep 1 */ |
| #define USIR0_IR2 (1 << 4) /* Interrup request ep 2 */ |
| #define USIR0_IR3 (1 << 3) /* Interrup request ep 3 */ |
| #define USIR0_IR4 (1 << 4) /* Interrup request ep 4 */ |
| #define USIR0_IR5 (1 << 5) /* Interrup request ep 5 */ |
| #define USIR0_IR6 (1 << 6) /* Interrup request ep 6 */ |
| #define USIR0_IR7 (1 << 7) /* Interrup request ep 7 */ |
| |
| #define USIR1 __REG(0x40600010) /* UDC Status Interrupt Register 1 */ |
| |
| #define USIR1_IR8 (1 << 0) /* Interrup request ep 8 */ |
| #define USIR1_IR9 (1 << 1) /* Interrup request ep 9 */ |
| #define USIR1_IR10 (1 << 2) /* Interrup request ep 10 */ |
| #define USIR1_IR11 (1 << 3) /* Interrup request ep 11 */ |
| #define USIR1_IR12 (1 << 4) /* Interrup request ep 12 */ |
| #define USIR1_IR13 (1 << 5) /* Interrup request ep 13 */ |
| #define USIR1_IR14 (1 << 6) /* Interrup request ep 14 */ |
| #define USIR1_IR15 (1 << 7) /* Interrup request ep 15 */ |
| |
| |
| #define UDCICR0 __REG(0x40600004) /* UDC Interrupt Control Register0 */ |
| #define UDCICR1 __REG(0x40600008) /* UDC Interrupt Control Register1 */ |
| #define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */ |
| #define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */ |
| |
| #define UDCICR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) |
| #define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */ |
| #define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */ |
| #define UDCICR1_IERU (1 << 29) /* IntEn - Resume */ |
| #define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */ |
| #define UDCICR1_IERS (1 << 27) /* IntEn - Reset */ |
| |
| #define UDCISR0 __REG(0x4060000C) /* UDC Interrupt Status Register 0 */ |
| #define UDCISR1 __REG(0x40600010) /* UDC Interrupt Status Register 1 */ |
| #define UDCISR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) |
| #define UDCISR1_IRCC (1 << 31) /* IntEn - Configuration Change */ |
| #define UDCISR1_IRSOF (1 << 30) /* IntEn - Start of Frame */ |
| #define UDCISR1_IRRU (1 << 29) /* IntEn - Resume */ |
| #define UDCISR1_IRSU (1 << 28) /* IntEn - Suspend */ |
| #define UDCISR1_IRRS (1 << 27) /* IntEn - Reset */ |
| |
| |
| #define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */ |
| #define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */ |
| #define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */ |
| #define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt Rising Edge Interrupt Enable */ |
| #define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt Falling Edge Interrupt Enable */ |
| #define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge Interrupt Enable */ |
| #define UDCOTGICR_IEVV40F (1 << 8) /* OTG Vbus Valid 4.0V Falling Edge Interrupt Enable */ |
| #define UDCOTGICR_IEVV44R (1 << 7) /* OTG Vbus Valid 4.4V Rising Edge Interrupt Enable */ |
| #define UDCOTGICR_IEVV44F (1 << 6) /* OTG Vbus Valid 4.4V Falling Edge Interrupt Enable */ |
| #define UDCOTGICR_IESVR (1 << 5) /* OTG Session Valid Rising Edge Interrupt Enable */ |
| #define UDCOTGICR_IESVF (1 << 4) /* OTG Session Valid Falling Edge Interrupt Enable */ |
| #define UDCOTGICR_IESDR (1 << 3) /* OTG A-Device SRP Detect Rising Edge Interrupt Enable */ |
| #define UDCOTGICR_IESDF (1 << 2) /* OTG A-Device SRP Detect Falling Edge Interrupt Enable */ |
| #define UDCOTGICR_IEIDR (1 << 1) /* OTG ID Change Rising Edge Interrupt Enable */ |
| #define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge Interrupt Enable */ |
| |
| #define UDCCSN(x) __REG2(0x40600100, (x) << 2) |
| #define UDCCSR0 __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */ |
| |
| #define UDCCSR0_SA (1 << 7) /* Setup Active */ |
| #define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */ |
| #define UDCCSR0_FST (1 << 5) /* Force Stall */ |
| #define UDCCSR0_SST (1 << 4) /* Sent Stall */ |
| #define UDCCSR0_DME (1 << 3) /* DMA Enable */ |
| #define UDCCSR0_FTF (1 << 2) /* Flush Transmit FIFO */ |
| #define UDCCSR0_IPR (1 << 1) /* IN Packet Ready */ |
| #define UDCCSR0_OPC (1 << 0) /* OUT Packet Complete */ |
| |
| #define UDCCSRA __REG(0x40600104) /* UDC Control/Status register - Endpoint A */ |
| #define UDCCSRB __REG(0x40600108) /* UDC Control/Status register - Endpoint B */ |
| #define UDCCSRC __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */ |
| #define UDCCSRD __REG(0x40600110) /* UDC Control/Status register - Endpoint D */ |
| #define UDCCSRE __REG(0x40600114) /* UDC Control/Status register - Endpoint E */ |
| #define UDCCSRF __REG(0x40600118) /* UDC Control/Status register - Endpoint F */ |
| #define UDCCSRG __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */ |
| #define UDCCSRH __REG(0x40600120) /* UDC Control/Status register - Endpoint H */ |
| #define UDCCSRI __REG(0x40600124) /* UDC Control/Status register - Endpoint I */ |
| #define UDCCSRJ __REG(0x40600128) /* UDC Control/Status register - Endpoint J */ |
| #define UDCCSRK __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */ |
| #define UDCCSRL __REG(0x40600130) /* UDC Control/Status register - Endpoint L */ |
| #define UDCCSRM __REG(0x40600134) /* UDC Control/Status register - Endpoint M */ |
| #define UDCCSRN __REG(0x40600138) /* UDC Control/Status register - Endpoint N */ |
| #define UDCCSRP __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */ |
| #define UDCCSRQ __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */ |
| #define UDCCSRR __REG(0x40600144) /* UDC Control/Status register - Endpoint R */ |
| #define UDCCSRS __REG(0x40600148) /* UDC Control/Status register - Endpoint S */ |
| #define UDCCSRT __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */ |
| #define UDCCSRU __REG(0x40600150) /* UDC Control/Status register - Endpoint U */ |
| #define UDCCSRV __REG(0x40600154) /* UDC Control/Status register - Endpoint V */ |
| #define UDCCSRW __REG(0x40600158) /* UDC Control/Status register - Endpoint W */ |
| #define UDCCSRX __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */ |
| |
| #define UDCCSR_DPE (1 << 9) /* Data Packet Error */ |
| #define UDCCSR_FEF (1 << 8) /* Flush Endpoint FIFO */ |
| #define UDCCSR_SP (1 << 7) /* Short Packet Control/Status */ |
| #define UDCCSR_BNE (1 << 6) /* Buffer Not Empty (IN endpoints) */ |
| #define UDCCSR_BNF (1 << 6) /* Buffer Not Full (OUT endpoints) */ |
| #define UDCCSR_FST (1 << 5) /* Force STALL */ |
| #define UDCCSR_SST (1 << 4) /* Sent STALL */ |
| #define UDCCSR_DME (1 << 3) /* DMA Enable */ |
| #define UDCCSR_TRN (1 << 2) /* Tx/Rx NAK */ |
| #define UDCCSR_PC (1 << 1) /* Packet Complete */ |
| #define UDCCSR_FS (1 << 0) /* FIFO needs service */ |
| |
| #define UDCBCN(x) __REG2(0x40600200, (x)<<2) |
| #define UDCBCR0 __REG(0x40600200) /* Byte Count Register - EP0 */ |
| #define UDCBCRA __REG(0x40600204) /* Byte Count Register - EPA */ |
| #define UDCBCRB __REG(0x40600208) /* Byte Count Register - EPB */ |
| #define UDCBCRC __REG(0x4060020C) /* Byte Count Register - EPC */ |
| #define UDCBCRD __REG(0x40600210) /* Byte Count Register - EPD */ |
| #define UDCBCRE __REG(0x40600214) /* Byte Count Register - EPE */ |
| #define UDCBCRF __REG(0x40600218) /* Byte Count Register - EPF */ |
| #define UDCBCRG __REG(0x4060021C) /* Byte Count Register - EPG */ |
| #define UDCBCRH __REG(0x40600220) /* Byte Count Register - EPH */ |
| #define UDCBCRI __REG(0x40600224) /* Byte Count Register - EPI */ |
| #define UDCBCRJ __REG(0x40600228) /* Byte Count Register - EPJ */ |
| #define UDCBCRK __REG(0x4060022C) /* Byte Count Register - EPK */ |
| #define UDCBCRL __REG(0x40600230) /* Byte Count Register - EPL */ |
| #define UDCBCRM __REG(0x40600234) /* Byte Count Register - EPM */ |
| #define UDCBCRN __REG(0x40600238) /* Byte Count Register - EPN */ |
| #define UDCBCRP __REG(0x4060023C) /* Byte Count Register - EPP */ |
| #define UDCBCRQ __REG(0x40600240) /* Byte Count Register - EPQ */ |
| #define UDCBCRR __REG(0x40600244) /* Byte Count Register - EPR */ |
| #define UDCBCRS __REG(0x40600248) /* Byte Count Register - EPS */ |
| #define UDCBCRT __REG(0x4060024C) /* Byte Count Register - EPT */ |
| #define UDCBCRU __REG(0x40600250) /* Byte Count Register - EPU */ |
| #define UDCBCRV __REG(0x40600254) /* Byte Count Register - EPV */ |
| #define UDCBCRW __REG(0x40600258) /* Byte Count Register - EPW */ |
| #define UDCBCRX __REG(0x4060025C) /* Byte Count Register - EPX */ |
| |
| #define UDCDN(x) __REG2(0x40600300, (x)<<2) |
| #define UDCDR0 __REG(0x40600300) /* Data Register - EP0 */ |
| #define UDCDRA __REG(0x40600304) /* Data Register - EPA */ |
| #define UDCDRB __REG(0x40600308) /* Data Register - EPB */ |
| #define UDCDRC __REG(0x4060030C) /* Data Register - EPC */ |
| #define UDCDRD __REG(0x40600310) /* Data Register - EPD */ |
| #define UDCDRE __REG(0x40600314) /* Data Register - EPE */ |
| #define UDCDRF __REG(0x40600318) /* Data Register - EPF */ |
| #define UDCDRG __REG(0x4060031C) /* Data Register - EPG */ |
| #define UDCDRH __REG(0x40600320) /* Data Register - EPH */ |
| #define UDCDRI __REG(0x40600324) /* Data Register - EPI */ |
| #define UDCDRJ __REG(0x40600328) /* Data Register - EPJ */ |
| #define UDCDRK __REG(0x4060032C) /* Data Register - EPK */ |
| #define UDCDRL __REG(0x40600330) /* Data Register - EPL */ |
| #define UDCDRM __REG(0x40600334) /* Data Register - EPM */ |
| #define UDCDRN __REG(0x40600338) /* Data Register - EPN */ |
| #define UDCDRP __REG(0x4060033C) /* Data Register - EPP */ |
| #define UDCDRQ __REG(0x40600340) /* Data Register - EPQ */ |
| #define UDCDRR __REG(0x40600344) /* Data Register - EPR */ |
| #define UDCDRS __REG(0x40600348) /* Data Register - EPS */ |
| #define UDCDRT __REG(0x4060034C) /* Data Register - EPT */ |
| #define UDCDRU __REG(0x40600350) /* Data Register - EPU */ |
| #define UDCDRV __REG(0x40600354) /* Data Register - EPV */ |
| #define UDCDRW __REG(0x40600358) /* Data Register - EPW */ |
| #define UDCDRX __REG(0x4060035C) /* Data Register - EPX */ |
| |
| #define UDCCN(x) __REG2(0x40600400, (x)<<2) |
| #define UDCCRA __REG(0x40600404) /* Configuration register EPA */ |
| #define UDCCRB __REG(0x40600408) /* Configuration register EPB */ |
| #define UDCCRC __REG(0x4060040C) /* Configuration register EPC */ |
| #define UDCCRD __REG(0x40600410) /* Configuration register EPD */ |
| #define UDCCRE __REG(0x40600414) /* Configuration register EPE */ |
| #define UDCCRF __REG(0x40600418) /* Configuration register EPF */ |
| #define UDCCRG __REG(0x4060041C) /* Configuration register EPG */ |
| #define UDCCRH __REG(0x40600420) /* Configuration register EPH */ |
| #define UDCCRI __REG(0x40600424) /* Configuration register EPI */ |
| #define UDCCRJ __REG(0x40600428) /* Configuration register EPJ */ |
| #define UDCCRK __REG(0x4060042C) /* Configuration register EPK */ |
| #define UDCCRL __REG(0x40600430) /* Configuration register EPL */ |
| #define UDCCRM __REG(0x40600434) /* Configuration register EPM */ |
| #define UDCCRN __REG(0x40600438) /* Configuration register EPN */ |
| #define UDCCRP __REG(0x4060043C) /* Configuration register EPP */ |
| #define UDCCRQ __REG(0x40600440) /* Configuration register EPQ */ |
| #define UDCCRR __REG(0x40600444) /* Configuration register EPR */ |
| #define UDCCRS __REG(0x40600448) /* Configuration register EPS */ |
| #define UDCCRT __REG(0x4060044C) /* Configuration register EPT */ |
| #define UDCCRU __REG(0x40600450) /* Configuration register EPU */ |
| #define UDCCRV __REG(0x40600454) /* Configuration register EPV */ |
| #define UDCCRW __REG(0x40600458) /* Configuration register EPW */ |
| #define UDCCRX __REG(0x4060045C) /* Configuration register EPX */ |
| |
| #define UDCCONR_CN (0x03 << 25) /* Configuration Number */ |
| #define UDCCONR_CN_S (25) |
| #define UDCCONR_IN (0x07 << 22) /* Interface Number */ |
| #define UDCCONR_IN_S (22) |
| #define UDCCONR_AISN (0x07 << 19) /* Alternate Interface Number */ |
| #define UDCCONR_AISN_S (19) |
| #define UDCCONR_EN (0x0f << 15) /* Endpoint Number */ |
| #define UDCCONR_EN_S (15) |
| #define UDCCONR_ET (0x03 << 13) /* Endpoint Type: */ |
| #define UDCCONR_ET_S (13) |
| #define UDCCONR_ET_INT (0x03 << 13) /* Interrupt */ |
| #define UDCCONR_ET_BULK (0x02 << 13) /* Bulk */ |
| #define UDCCONR_ET_ISO (0x01 << 13) /* Isochronous */ |
| #define UDCCONR_ET_NU (0x00 << 13) /* Not used */ |
| #define UDCCONR_ED (1 << 12) /* Endpoint Direction */ |
| #define UDCCONR_MPS (0x3ff << 2) /* Maximum Packet Size */ |
| #define UDCCONR_MPS_S (2) |
| #define UDCCONR_DE (1 << 1) /* Double Buffering Enable */ |
| #define UDCCONR_EE (1 << 0) /* Endpoint Enable */ |
| |
| |
| #define UDC_INT_FIFOERROR (0x2) |
| #define UDC_INT_PACKETCMP (0x1) |
| #define UDC_FNR_MASK (0x7ff) |
| #define UDCCSR_WR_MASK (UDCCSR_DME|UDCCSR_FST) |
| #define UDC_BCR_MASK (0x3ff) |
| |
| #endif /* CONFIG_PXA27X */ |
| |
| #if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS) |
| |
| /* |
| * USB Host Controller |
| */ |
| #define OHCI_REGS_BASE 0x4C000000 /* required for ohci driver */ |
| #define UHCREV __REG(0x4C000000) |
| #define UHCHCON __REG(0x4C000004) |
| #define UHCCOMS __REG(0x4C000008) |
| #define UHCINTS __REG(0x4C00000C) |
| #define UHCINTE __REG(0x4C000010) |
| #define UHCINTD __REG(0x4C000014) |
| #define UHCHCCA __REG(0x4C000018) |
| #define UHCPCED __REG(0x4C00001C) |
| #define UHCCHED __REG(0x4C000020) |
| #define UHCCCED __REG(0x4C000024) |
| #define UHCBHED __REG(0x4C000028) |
| #define UHCBCED __REG(0x4C00002C) |
| #define UHCDHEAD __REG(0x4C000030) |
| #define UHCFMI __REG(0x4C000034) |
| #define UHCFMR __REG(0x4C000038) |
| #define UHCFMN __REG(0x4C00003C) |
| #define UHCPERS __REG(0x4C000040) |
| #define UHCLST __REG(0x4C000044) |
| #define UHCRHDA __REG(0x4C000048) |
| #define UHCRHDB __REG(0x4C00004C) |
| #define UHCRHS __REG(0x4C000050) |
| #define UHCRHPS1 __REG(0x4C000054) |
| #define UHCRHPS2 __REG(0x4C000058) |
| #define UHCRHPS3 __REG(0x4C00005C) |
| #define UHCSTAT __REG(0x4C000060) |
| #define UHCHR __REG(0x4C000064) |
| #define UHCHIE __REG(0x4C000068) |
| #define UHCHIT __REG(0x4C00006C) |
| |
| #if defined(CONFIG_CPU_MONAHANS) |
| #define UP2OCR __REG(0x40600020) |
| #endif |
| |
| #define UHCHR_FSBIR (1<<0) |
| #define UHCHR_FHR (1<<1) |
| #define UHCHR_CGR (1<<2) |
| #define UHCHR_SSDC (1<<3) |
| #define UHCHR_UIT (1<<4) |
| #define UHCHR_SSE (1<<5) |
| #define UHCHR_PSPL (1<<6) |
| #define UHCHR_PCPL (1<<7) |
| #define UHCHR_SSEP0 (1<<9) |
| #define UHCHR_SSEP1 (1<<10) |
| #define UHCHR_SSEP2 (1<<11) |
| |
| #define UHCHIE_UPRIE (1<<13) |
| #define UHCHIE_UPS2IE (1<<12) |
| #define UHCHIE_UPS1IE (1<<11) |
| #define UHCHIE_TAIE (1<<10) |
| #define UHCHIE_HBAIE (1<<8) |
| #define UHCHIE_RWIE (1<<7) |
| |
| #endif |
| |
| /* |
| * Fast Infrared Communication Port |
| */ |
| #define ICCR0 __REG(0x40800000) /* ICP Control Register 0 */ |
| #define ICCR1 __REG(0x40800004) /* ICP Control Register 1 */ |
| #define ICCR2 __REG(0x40800008) /* ICP Control Register 2 */ |
| #define ICDR __REG(0x4080000c) /* ICP Data Register */ |
| #define ICSR0 __REG(0x40800014) /* ICP Status Register 0 */ |
| #define ICSR1 __REG(0x40800018) /* ICP Status Register 1 */ |
| |
| /* |
| * Real Time Clock |
| */ |
| #define RCNR __REG(0x40900000) /* RTC Count Register */ |
| #define RTAR __REG(0x40900004) /* RTC Alarm Register */ |
| #define RTSR __REG(0x40900008) /* RTC Status Register */ |
| #define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */ |
| #define RDAR1 __REG(0x40900018) /* Wristwatch Day Alarm Reg 1 */ |
| #define RDAR2 __REG(0x40900020) /* Wristwatch Day Alarm Reg 2 */ |
| #define RYAR1 __REG(0x4090001C) /* Wristwatch Year Alarm Reg 1 */ |
| #define RYAR2 __REG(0x40900024) /* Wristwatch Year Alarm Reg 2 */ |
| #define SWAR1 __REG(0x4090002C) /* Stopwatch Alarm Register 1 */ |
| #define SWAR2 __REG(0x40900030) /* Stopwatch Alarm Register 2 */ |
| #define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */ |
| #define RDCR __REG(0x40900010) /* RTC Day Count Register. */ |
| #define RYCR __REG(0x40900014) /* RTC Year Count Register. */ |
| #define SWCR __REG(0x40900028) /* Stopwatch Count Register */ |
| #define RTCPICR __REG(0x40900034) /* Periodic Interrupt Counter Register */ |
| |
| #define RTSR_PICE (1 << 15) /* Peridoc interrupt count enable */ |
| #define RTSR_PIALE (1 << 14) /* Peridoc interrupt Alarm enable */ |
| #define RTSR_PIAL (1 << 13) /* Peridoc interrupt Alarm status */ |
| #define RTSR_HZE (1 << 3) /* HZ interrupt enable */ |
| #define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */ |
| #define RTSR_HZ (1 << 1) /* HZ rising-edge detected */ |
| #define RTSR_AL (1 << 0) /* RTC alarm detected */ |
| |
| /* |
| * OS Timer & Match Registers |
| */ |
| #define OSMR0 __REG(0x40A00000) /* OS Timer Match Register 0 */ |
| #define OSMR1 __REG(0x40A00004) /* OS Timer Match Register 1 */ |
| #define OSMR2 __REG(0x40A00008) /* OS Timer Match Register 2 */ |
| #define OSMR3 __REG(0x40A0000C) /* OS Timer Match Register 3 */ |
| #define OSCR __REG(0x40A00010) /* OS Timer Counter Register */ |
| #define OSSR __REG(0x40A00014) /* OS Timer Status Register */ |
| #define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */ |
| #define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */ |
| |
| #ifdef CONFIG_CPU_MONAHANS |
| #define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register 4 */ |
| #define OSCR5 __REG(0x40A00044) /* OS Timer Counter Register 5 */ |
| #define OSCR6 __REG(0x40A00048) /* OS Timer Counter Register 6 */ |
| #define OSCR7 __REG(0x40A0004C) /* OS Timer Counter Register 7 */ |
| #define OSCR8 __REG(0x40A00050) /* OS Timer Counter Register 8 */ |
| #define OSCR9 __REG(0x40A00054) /* OS Timer Counter Register 9 */ |
| #define OSCR10 __REG(0x40A00058) /* OS Timer Counter Register 10 */ |
| #define OSCR11 __REG(0x40A0005C) /* OS Timer Counter Register 11 */ |
| |
| #define OSMR4 __REG(0x40A00080) /* OS Timer Match Register 4 */ |
| #define OSMR5 __REG(0x40A00084) /* OS Timer Match Register 5 */ |
| #define OSMR6 __REG(0x40A00088) /* OS Timer Match Register 6 */ |
| #define OSMR7 __REG(0x40A0008C) /* OS Timer Match Register 7 */ |
| #define OSMR8 __REG(0x40A00090) /* OS Timer Match Register 8 */ |
| #define OSMR9 __REG(0x40A00094) /* OS Timer Match Register 9 */ |
| #define OSMR10 __REG(0x40A00098) /* OS Timer Match Register 10 */ |
| #define OSMR11 __REG(0x40A0009C) /* OS Timer Match Register 11 */ |
| |
| #define OMCR4 __REG(0x40A000C0) /* OS Match Control Register 4 */ |
| #define OMCR5 __REG(0x40A000C4) /* OS Match Control Register 5 */ |
| #define OMCR6 __REG(0x40A000C8) /* OS Match Control Register 6 */ |
| #define OMCR7 __REG(0x40A000CC) /* OS Match Control Register 7 */ |
| #define OMCR8 __REG(0x40A000D0) /* OS Match Control Register 8 */ |
| #define OMCR9 __REG(0x40A000D4) /* OS Match Control Register 9 */ |
| #define OMCR10 __REG(0x40A000D8) /* OS Match Control Register 10 */ |
| #define OMCR11 __REG(0x40A000DC) /* OS Match Control Register 11 */ |
| |
| #define OSCR_CLK_FREQ 3250 /* kHz = 3.25 MHz */ |
| #endif /* CONFIG_CPU_MONAHANS */ |
| |
| #define OSSR_M4 (1 << 4) /* Match status channel 4 */ |
| #define OSSR_M3 (1 << 3) /* Match status channel 3 */ |
| #define OSSR_M2 (1 << 2) /* Match status channel 2 */ |
| #define OSSR_M1 (1 << 1) /* Match status channel 1 */ |
| #define OSSR_M0 (1 << 0) /* Match status channel 0 */ |
| |
| #define OWER_WME (1 << 0) /* Watchdog Match Enable */ |
| |
| #define OIER_E4 (1 << 4) /* Interrupt enable channel 4 */ |
| #define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */ |
| #define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */ |
| #define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */ |
| #define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */ |
| |
| /* |
| * Pulse Width Modulator |
| */ |
| #define PWM_CTRL0 __REG(0x40B00000) /* PWM 0 Control Register */ |
| #define PWM_PWDUTY0 __REG(0x40B00004) /* PWM 0 Duty Cycle Register */ |
| #define PWM_PERVAL0 __REG(0x40B00008) /* PWM 0 Period Control Register */ |
| |
| #define PWM_CTRL1 __REG(0x40C00000) /* PWM 1Control Register */ |
| #define PWM_PWDUTY1 __REG(0x40C00004) /* PWM 1 Duty Cycle Register */ |
| #define PWM_PERVAL1 __REG(0x40C00008) /* PWM 1 Period Control Register */ |
| |
| /* |
| * Interrupt Controller |
| */ |
| #define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */ |
| #define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */ |
| #define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */ |
| #define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */ |
| #define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */ |
| #define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */ |
| |
| #ifdef CONFIG_CPU_MONAHANS |
| #define ICHP __REG(0x40D00018) /* Interrupt Controller Highest Priority Register */ |
| /* Missing: 32 Interrupt priority registers |
| * These are the same as beneath for PXA27x: maybe can be merged if |
| * GPIO Stuff is same too. |
| */ |
| #define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ |
| #define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ |
| #define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ |
| #define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ |
| #define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ |
| /* Missing: 2 Interrupt priority registers */ |
| #endif /* CONFIG_CPU_MONAHANS */ |
| |
| /* |
| * General Purpose I/O |
| */ |
| #define GPLR0 __REG(0x40E00000) /* GPIO Pin-Level Register GPIO<31:0> */ |
| #define GPLR1 __REG(0x40E00004) /* GPIO Pin-Level Register GPIO<63:32> */ |
| #define GPLR2 __REG(0x40E00008) /* GPIO Pin-Level Register GPIO<80:64> */ |
| |
| #define GPDR0 __REG(0x40E0000C) /* GPIO Pin Direction Register GPIO<31:0> */ |
| #define GPDR1 __REG(0x40E00010) /* GPIO Pin Direction Register GPIO<63:32> */ |
| #define GPDR2 __REG(0x40E00014) /* GPIO Pin Direction Register GPIO<80:64> */ |
| |
| #define GPSR0 __REG(0x40E00018) /* GPIO Pin Output Set Register GPIO<31:0> */ |
| #define GPSR1 __REG(0x40E0001C) /* GPIO Pin Output Set Register GPIO<63:32> */ |
| #define GPSR2 __REG(0x40E00020) /* GPIO Pin Output Set Register GPIO<80:64> */ |
| |
| #define GPCR0 __REG(0x40E00024) /* GPIO Pin Output Clear Register GPIO<31:0> */ |
| #define GPCR1 __REG(0x40E00028) /* GPIO Pin Output Clear Register GPIO <63:32> */ |
| #define GPCR2 __REG(0x40E0002C) /* GPIO Pin Output Clear Register GPIO <80:64> */ |
| |
| #define GRER0 __REG(0x40E00030) /* GPIO Rising-Edge Detect Register GPIO<31:0> */ |
| #define GRER1 __REG(0x40E00034) /* GPIO Rising-Edge Detect Register GPIO<63:32> */ |
| #define GRER2 __REG(0x40E00038) /* GPIO Rising-Edge Detect Register GPIO<80:64> */ |
| |
| #define GFER0 __REG(0x40E0003C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */ |
| #define GFER1 __REG(0x40E00040) /* GPIO Falling-Edge Detect Register GPIO<63:32> */ |
| #define GFER2 __REG(0x40E00044) /* GPIO Falling-Edge Detect Register GPIO<80:64> */ |
| |
| #define GEDR0 __REG(0x40E00048) /* GPIO Edge Detect Status Register GPIO<31:0> */ |
| #define GEDR1 __REG(0x40E0004C) /* GPIO Edge Detect Status Register GPIO<63:32> */ |
| #define GEDR2 __REG(0x40E00050) /* GPIO Edge Detect Status Register GPIO<80:64> */ |
| |
| #ifdef CONFIG_CPU_MONAHANS |
| #define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */ |
| #define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */ |
| #define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */ |
| #define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO<127:96> */ |
| #define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */ |
| #define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<127:96> */ |
| #define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */ |
| |
| #define GSDR0 __REG(0x40E00400) /* Bit-wise Set of GPDR[31:0] */ |
| #define GSDR1 __REG(0x40E00404) /* Bit-wise Set of GPDR[63:32] */ |
| #define GSDR2 __REG(0x40E00408) /* Bit-wise Set of GPDR[95:64] */ |
| #define GSDR3 __REG(0x40E0040C) /* Bit-wise Set of GPDR[127:96] */ |
| |
| #define GCDR0 __REG(0x40E00420) /* Bit-wise Clear of GPDR[31:0] */ |
| #define GCDR1 __REG(0x40E00424) /* Bit-wise Clear of GPDR[63:32] */ |
| #define GCDR2 __REG(0x40E00428) /* Bit-wise Clear of GPDR[95:64] */ |
| #define GCDR3 __REG(0x40E0042C) /* Bit-wise Clear of GPDR[127:96] */ |
| |
| #define GSRER0 __REG(0x40E00440) /* Set Rising Edge Det. Enable [31:0] */ |
| #define GSRER1 __REG(0x40E00444) /* Set Rising Edge Det. Enable [63:32] */ |
| #define GSRER2 __REG(0x40E00448) /* Set Rising Edge Det. Enable [95:64] */ |
| #define GSRER3 __REG(0x40E0044C) /* Set Rising Edge Det. Enable [127:96] */ |
| |
| #define GCRER0 __REG(0x40E00460) /* Clear Rising Edge Det. Enable [31:0] */ |
| #define GCRER1 __REG(0x40E00464) /* Clear Rising Edge Det. Enable [63:32] */ |
| #define GCRER2 __REG(0x40E00468) /* Clear Rising Edge Det. Enable [95:64] */ |
| #define GCRER3 __REG(0x40E0046C) /* Clear Rising Edge Det. Enable[127:96] */ |
| |
| #define GSFER0 __REG(0x40E00480) /* Set Falling Edge Det. Enable [31:0] */ |
| #define GSFER1 __REG(0x40E00484) /* Set Falling Edge Det. Enable [63:32] */ |
| #define GSFER2 __REG(0x40E00488) /* Set Falling Edge Det. Enable [95:64] */ |
| #define GSFER3 __REG(0x40E0048C) /* Set Falling Edge Det. Enable[127:96] */ |
| |
| #define GCFER0 __REG(0x40E004A0) /* Clr Falling Edge Det. Enable [31:0] */ |
| #define GCFER1 __REG(0x40E004A4) /* Clr Falling Edge Det. Enable [63:32] */ |
| #define GCFER2 __REG(0x40E004A8) /* Clr Falling Edge Det. Enable [95:64] */ |
| #define GCFER3 __REG(0x40E004AC) /* Clr Falling Edge Det. Enable[127:96] */ |
| |
| #define GSDR(x) __REG2(0x40E00400, ((x) & 0x60) >> 3) |
| #define GCDR(x) __REG2(0x40E00420, ((x) & 0x60) >> 3) |
| |
| /* Multi-funktion Pin Registers, uncomplete, only: |
| * - GPIO |
| * - Data Flash DF_* pins defined. |
| */ |
| #define GPIO0 __REG(0x40e10124) |
| #define GPIO1 __REG(0x40e10128) |
| #define GPIO2 __REG(0x40e1012c) |
| #define GPIO3 __REG(0x40e10130) |
| #define GPIO4 __REG(0x40e10134) |
| #define nXCVREN __REG(0x40e10138) |
| |
| #define DF_CLE_NOE __REG(0x40e10204) |
| #define DF_ALE_WE1 __REG(0x40e10208) |
| |
| #define DF_SCLK_E __REG(0x40e10210) |
| #define nBE0 __REG(0x40e10214) |
| #define nBE1 __REG(0x40e10218) |
| #define DF_ALE_WE2 __REG(0x40e1021c) |
| #define DF_INT_RnB __REG(0x40e10220) |
| #define DF_nCS0 __REG(0x40e10224) |
| #define DF_nCS1 __REG(0x40e10228) |
| #define DF_nWE __REG(0x40e1022c) |
| #define DF_nRE __REG(0x40e10230) |
| #define nLUA __REG(0x40e10234) |
| #define nLLA __REG(0x40e10238) |
| #define DF_ADDR0 __REG(0x40e1023c) |
| #define DF_ADDR1 __REG(0x40e10240) |
| #define DF_ADDR2 __REG(0x40e10244) |
| #define DF_ADDR3 __REG(0x40e10248) |
| #define DF_IO0 __REG(0x40e1024c) |
| #define DF_IO8 __REG(0x40e10250) |
| #define DF_IO1 __REG(0x40e10254) |
| #define DF_IO9 __REG(0x40e10258) |
| #define DF_IO2 __REG(0x40e1025c) |
| #define DF_IO10 __REG(0x40e10260) |
| #define DF_IO3 __REG(0x40e10264) |
| #define DF_IO11 __REG(0x40e10268) |
| #define DF_IO4 __REG(0x40e1026c) |
| #define DF_IO12 __REG(0x40e10270) |
| #define DF_IO5 __REG(0x40e10274) |
| #define DF_IO13 __REG(0x40e10278) |
| #define DF_IO6 __REG(0x40e1027c) |
| #define DF_IO14 __REG(0x40e10280) |
| #define DF_IO7 __REG(0x40e10284) |
| #define DF_IO15 __REG(0x40e10288) |
| |
| #define GPIO5 __REG(0x40e1028c) |
| #define GPIO6 __REG(0x40e10290) |
| #define GPIO7 __REG(0x40e10294) |
| #define GPIO8 __REG(0x40e10298) |
| #define GPIO9 __REG(0x40e1029c) |
| |
| #define GPIO11 __REG(0x40e102a0) |
| #define GPIO12 __REG(0x40e102a4) |
| #define GPIO13 __REG(0x40e102a8) |
| #define GPIO14 __REG(0x40e102ac) |
| #define GPIO15 __REG(0x40e102b0) |
| #define GPIO16 __REG(0x40e102b4) |
| #define GPIO17 __REG(0x40e102b8) |
| #define GPIO18 __REG(0x40e102bc) |
| #define GPIO19 __REG(0x40e102c0) |
| #define GPIO20 __REG(0x40e102c4) |
| #define GPIO21 __REG(0x40e102c8) |
| #define GPIO22 __REG(0x40e102cc) |
| #define GPIO23 __REG(0x40e102d0) |
| #define GPIO24 __REG(0x40e102d4) |
| #define GPIO25 __REG(0x40e102d8) |
| #define GPIO26 __REG(0x40e102dc) |
| |
| #define GPIO27 __REG(0x40e10400) |
| #define GPIO28 __REG(0x40e10404) |
| #define GPIO29 __REG(0x40e10408) |
| #define GPIO30 __REG(0x40e1040c) |
| #define GPIO31 __REG(0x40e10410) |
| #define GPIO32 __REG(0x40e10414) |
| #define GPIO33 __REG(0x40e10418) |
| #define GPIO34 __REG(0x40e1041c) |
| #define GPIO35 __REG(0x40e10420) |
| #define GPIO36 __REG(0x40e10424) |
| #define GPIO37 __REG(0x40e10428) |
| #define GPIO38 __REG(0x40e1042c) |
| #define GPIO39 __REG(0x40e10430) |
| #define GPIO40 __REG(0x40e10434) |
| #define GPIO41 __REG(0x40e10438) |
| #define GPIO42 __REG(0x40e1043c) |
| #define GPIO43 __REG(0x40e10440) |
| #define GPIO44 __REG(0x40e10444) |
| #define GPIO45 __REG(0x40e10448) |
| #define GPIO46 __REG(0x40e1044c) |
| #define GPIO47 __REG(0x40e10450) |
| #define GPIO48 __REG(0x40e10454) |
| |
| #define GPIO10 __REG(0x40e10458) |
| |
| #define GPIO49 __REG(0x40e1045c) |
| #define GPIO50 __REG(0x40e10460) |
| #define GPIO51 __REG(0x40e10464) |
| #define GPIO52 __REG(0x40e10468) |
| #define GPIO53 __REG(0x40e1046c) |
| #define GPIO54 __REG(0x40e10470) |
| #define GPIO55 __REG(0x40e10474) |
| #define GPIO56 __REG(0x40e10478) |
| #define GPIO57 __REG(0x40e1047c) |
| #define GPIO58 __REG(0x40e10480) |
| #define GPIO59 __REG(0x40e10484) |
| #define GPIO60 __REG(0x40e10488) |
| #define GPIO61 __REG(0x40e1048c) |
| #define GPIO62 __REG(0x40e10490) |
| |
| #define GPIO6_2 __REG(0x40e10494) |
| #define GPIO7_2 __REG(0x40e10498) |
| #define GPIO8_2 __REG(0x40e1049c) |
| #define GPIO9_2 __REG(0x40e104a0) |
| #define GPIO10_2 __REG(0x40e104a4) |
| #define GPIO11_2 __REG(0x40e104a8) |
| #define GPIO12_2 __REG(0x40e104ac) |
| #define GPIO13_2 __REG(0x40e104b0) |
| |
| #define GPIO63 __REG(0x40e104b4) |
| #define GPIO64 __REG(0x40e104b8) |
| #define GPIO65 __REG(0x40e104bc) |
| #define GPIO66 __REG(0x40e104c0) |
| #define GPIO67 __REG(0x40e104c4) |
| #define GPIO68 __REG(0x40e104c8) |
| #define GPIO69 __REG(0x40e104cc) |
| #define GPIO70 __REG(0x40e104d0) |
| #define GPIO71 __REG(0x40e104d4) |
| #define GPIO72 __REG(0x40e104d8) |
| #define GPIO73 __REG(0x40e104dc) |
| |
| #define GPIO14_2 __REG(0x40e104e0) |
| #define GPIO15_2 __REG(0x40e104e4) |
| #define GPIO16_2 __REG(0x40e104e8) |
| #define GPIO17_2 __REG(0x40e104ec) |
| |
| #define GPIO74 __REG(0x40e104f0) |
| #define GPIO75 __REG(0x40e104f4) |
| #define GPIO76 __REG(0x40e104f8) |
| #define GPIO77 __REG(0x40e104fc) |
| #define GPIO78 __REG(0x40e10500) |
| #define GPIO79 __REG(0x40e10504) |
| #define GPIO80 __REG(0x40e10508) |
| #define GPIO81 __REG(0x40e1050c) |
| #define GPIO82 __REG(0x40e10510) |
| #define GPIO83 __REG(0x40e10514) |
| #define GPIO84 __REG(0x40e10518) |
| #define GPIO85 __REG(0x40e1051c) |
| #define GPIO86 __REG(0x40e10520) |
| #define GPIO87 __REG(0x40e10524) |
| #define GPIO88 __REG(0x40e10528) |
| #define GPIO89 __REG(0x40e1052c) |
| #define GPIO90 __REG(0x40e10530) |
| #define GPIO91 __REG(0x40e10534) |
| #define GPIO92 __REG(0x40e10538) |
| #define GPIO93 __REG(0x40e1053c) |
| #define GPIO94 __REG(0x40e10540) |
| #define GPIO95 __REG(0x40e10544) |
| #define GPIO96 __REG(0x40e10548) |
| #define GPIO97 __REG(0x40e1054c) |
| #define GPIO98 __REG(0x40e10550) |
| |
| #define GPIO99 __REG(0x40e10600) |
| #define GPIO100 __REG(0x40e10604) |
| #define GPIO101 __REG(0x40e10608) |
| #define GPIO102 __REG(0x40e1060c) |
| #define GPIO103 __REG(0x40e10610) |
| #define GPIO104 __REG(0x40e10614) |
| #define GPIO105 __REG(0x40e10618) |
| #define GPIO106 __REG(0x40e1061c) |
| #define GPIO107 __REG(0x40e10620) |
| #define GPIO108 __REG(0x40e10624) |
| #define GPIO109 __REG(0x40e10628) |
| #define GPIO110 __REG(0x40e1062c) |
| #define GPIO111 __REG(0x40e10630) |
| #define GPIO112 __REG(0x40e10634) |
| |
| #define GPIO113 __REG(0x40e10638) |
| #define GPIO114 __REG(0x40e1063c) |
| #define GPIO115 __REG(0x40e10640) |
| #define GPIO116 __REG(0x40e10644) |
| #define GPIO117 __REG(0x40e10648) |
| #define GPIO118 __REG(0x40e1064c) |
| #define GPIO119 __REG(0x40e10650) |
| #define GPIO120 __REG(0x40e10654) |
| #define GPIO121 __REG(0x40e10658) |
| #define GPIO122 __REG(0x40e1065c) |
| #define GPIO123 __REG(0x40e10660) |
| #define GPIO124 __REG(0x40e10664) |
| #define GPIO125 __REG(0x40e10668) |
| #define GPIO126 __REG(0x40e1066c) |
| #define GPIO127 __REG(0x40e10670) |
| |
| #define GPIO0_2 __REG(0x40e10674) |
| #define GPIO1_2 __REG(0x40e10678) |
| #define GPIO2_2 __REG(0x40e1067c) |
| #define GPIO3_2 __REG(0x40e10680) |
| #define GPIO4_2 __REG(0x40e10684) |
| #define GPIO5_2 __REG(0x40e10688) |
| |
| /* MFPR Bit Definitions, see 4-10, Vol. 1 */ |
| #define PULL_SEL 0x8000 |
| #define PULLUP_EN 0x4000 |
| #define PULLDOWN_EN 0x2000 |
| |
| #define DRIVE_FAST_1mA 0x0 |
| #define DRIVE_FAST_2mA 0x400 |
| #define DRIVE_FAST_3mA 0x800 |
| #define DRIVE_FAST_4mA 0xC00 |
| #define DRIVE_SLOW_6mA 0x1000 |
| #define DRIVE_FAST_6mA 0x1400 |
| #define DRIVE_SLOW_10mA 0x1800 |
| #define DRIVE_FAST_10mA 0x1C00 |
| |
| #define SLEEP_SEL 0x200 |
| #define SLEEP_DATA 0x100 |
| #define SLEEP_OE_N 0x80 |
| #define EDGE_CLEAR 0x40 |
| #define EDGE_FALL_EN 0x20 |
| #define EDGE_RISE_EN 0x10 |
| |
| #define AF_SEL_0 0x0 /* Alternate function 0 (reset state) */ |
| #define AF_SEL_1 0x1 /* Alternate function 1 */ |
| #define AF_SEL_2 0x2 /* Alternate function 2 */ |
| #define AF_SEL_3 0x3 /* Alternate function 3 */ |
| #define AF_SEL_4 0x4 /* Alternate function 4 */ |
| #define AF_SEL_5 0x5 /* Alternate function 5 */ |
| #define AF_SEL_6 0x6 /* Alternate function 6 */ |
| #define AF_SEL_7 0x7 /* Alternate function 7 */ |
| |
| |
| #else /* CONFIG_CPU_MONAHANS */ |
| |
| #define GAFR0_L __REG(0x40E00054) /* GPIO Alternate Function Select Register GPIO<15:0> */ |
| #define GAFR0_U __REG(0x40E00058) /* GPIO Alternate Function Select Register GPIO<31:16> */ |
| #define GAFR1_L __REG(0x40E0005C) /* GPIO Alternate Function Select Register GPIO<47:32> */ |
| #define GAFR1_U __REG(0x40E00060) /* GPIO Alternate Function Select Register GPIO<63:48> */ |
| #define GAFR2_L __REG(0x40E00064) /* GPIO Alternate Function Select Register GPIO<79:64> */ |
| #define GAFR2_U __REG(0x40E00068) /* GPIO Alternate Function Select Register GPIO 80 */ |
| #endif /* CONFIG_CPU_MONAHANS */ |
| |
| /* More handy macros. The argument is a literal GPIO number. */ |
| |
| #define GPIO_bit(x) (1 << ((x) & 0x1f)) |
| |
| #ifdef CONFIG_PXA27X |
| |
| /* Interrupt Controller */ |
| |
| #define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ |
| #define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ |
| #define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ |
| #define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ |
| #define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ |
| |
| #define _GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) |
| #define _GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) |
| #define _GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) |
| #define _GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3) |
| #define _GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3) |
| #define _GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3) |
| #define _GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) |
| #define _GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) |
| |
| #define GPLR(x) (*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3)) |
| #define GPDR(x) (*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3)) |
| #define GPSR(x) (*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3)) |
| #define GPCR(x) (*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3)) |
| #define GRER(x) (*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3)) |
| #define GFER(x) (*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3)) |
| #define GEDR(x) (*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3)) |
| #define GAFR(x) (*((((x) & 0x7f) < 96) ? &_GAFR(x) : \ |
| ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U))) |
| #else |
| |
| #define GPLR(x) __REG2(0x40E00000, ((x) & 0x60) >> 3) |
| #define GPDR(x) __REG2(0x40E0000C, ((x) & 0x60) >> 3) |
| #define GPSR(x) __REG2(0x40E00018, ((x) & 0x60) >> 3) |
| #define GPCR(x) __REG2(0x40E00024, ((x) & 0x60) >> 3) |
| #define GRER(x) __REG2(0x40E00030, ((x) & 0x60) >> 3) |
| #define GFER(x) __REG2(0x40E0003C, ((x) & 0x60) >> 3) |
| #define GEDR(x) __REG2(0x40E00048, ((x) & 0x60) >> 3) |
| #define GAFR(x) __REG2(0x40E00054, ((x) & 0x70) >> 2) |
| |
| #endif |
| |
| /* GPIO alternate function assignments */ |
| |
| #define GPIO1_RST 1 /* reset */ |
| #define GPIO6_MMCCLK 6 /* MMC Clock */ |
| #define GPIO8_48MHz 7 /* 48 MHz clock output */ |
| #define GPIO8_MMCCS0 8 /* MMC Chip Select 0 */ |
| #define GPIO9_MMCCS1 9 /* MMC Chip Select 1 */ |
| #define GPIO10_RTCCLK 10 /* real time clock (1 Hz) */ |
| #define GPIO11_3_6MHz 11 /* 3.6 MHz oscillator out */ |
| #define GPIO12_32KHz 12 /* 32 kHz out */ |
| #define GPIO13_MBGNT 13 /* memory controller grant */ |
| #define GPIO14_MBREQ 14 /* alternate bus master request */ |
| #define GPIO15_nCS_1 15 /* chip select 1 */ |
| #define GPIO16_PWM0 16 /* PWM0 output */ |
| #define GPIO17_PWM1 17 /* PWM1 output */ |
| #define GPIO18_RDY 18 /* Ext. Bus Ready */ |
| #define GPIO19_DREQ1 19 /* External DMA Request */ |
| #define GPIO20_DREQ0 20 /* External DMA Request */ |
| #define GPIO23_SCLK 23 /* SSP clock */ |
| #define GPIO24_SFRM 24 /* SSP Frame */ |
| #define GPIO25_STXD 25 /* SSP transmit */ |
| #define GPIO26_SRXD 26 /* SSP receive */ |
| #define GPIO27_SEXTCLK 27 /* SSP ext_clk */ |
| #define GPIO28_BITCLK 28 /* AC97/I2S bit_clk */ |
| #define GPIO29_SDATA_IN 29 /* AC97 Sdata_in0 / I2S Sdata_in */ |
| #define GPIO30_SDATA_OUT 30 /* AC97/I2S Sdata_out */ |
| #define GPIO31_SYNC 31 /* AC97/I2S sync */ |
| #define GPIO32_SDATA_IN1 32 /* AC97 Sdata_in1 */ |
| #define GPIO33_nCS_5 33 /* chip select 5 */ |
| #define GPIO34_FFRXD 34 /* FFUART receive */ |
| #define GPIO34_MMCCS0 34 /* MMC Chip Select 0 */ |
| #define GPIO35_FFCTS 35 /* FFUART Clear to send */ |
| #define GPIO36_FFDCD 36 /* FFUART Data carrier detect */ |
| #define GPIO37_FFDSR 37 /* FFUART data set ready */ |
| #define GPIO38_FFRI 38 /* FFUART Ring Indicator */ |
| #define GPIO39_MMCCS1 39 /* MMC Chip Select 1 */ |
| #define GPIO39_FFTXD 39 /* FFUART transmit data */ |
| #define GPIO40_FFDTR 40 /* FFUART data terminal Ready */ |
| #define GPIO41_FFRTS 41 /* FFUART request to send */ |
| #define GPIO42_BTRXD 42 /* BTUART receive data */ |
| #define GPIO43_BTTXD 43 /* BTUART transmit data */ |
| #define GPIO44_BTCTS 44 /* BTUART clear to send */ |
| #define GPIO45_BTRTS 45 /* BTUART request to send */ |
| #define GPIO46_ICPRXD 46 /* ICP receive data */ |
| #define GPIO46_STRXD 46 /* STD_UART receive data */ |
| #define GPIO47_ICPTXD 47 /* ICP transmit data */ |
| #define GPIO47_STTXD 47 /* STD_UART transmit data */ |
| #define GPIO48_nPOE 48 /* Output Enable for Card Space */ |
| #define GPIO49_nPWE 49 /* Write Enable for Card Space */ |
| #define GPIO50_nPIOR 50 /* I/O Read for Card Space */ |
| #define GPIO51_nPIOW 51 /* I/O Write for Card Space */ |
| #define GPIO52_nPCE_1 52 /* Card Enable for Card Space */ |
| #define GPIO53_nPCE_2 53 /* Card Enable for Card Space */ |
| #define GPIO53_MMCCLK 53 /* MMC Clock */ |
| #define GPIO54_MMCCLK 54 /* MMC Clock */ |
| #define GPIO54_pSKTSEL 54 /* Socket Select for Card Space */ |
| #define GPIO55_nPREG 55 /* Card Address bit 26 */ |
| #define GPIO56_nPWAIT 56 /* Wait signal for Card Space */ |
| #define GPIO57_nIOIS16 57 /* Bus Width select for I/O Card Space */ |
| #define GPIO58_LDD_0 58 /* LCD data pin 0 */ |
| #define GPIO59_LDD_1 59 /* LCD data pin 1 */ |
| #define GPIO60_LDD_2 60 /* LCD data pin 2 */ |
| #define GPIO61_LDD_3 61 /* LCD data pin 3 */ |
| #define GPIO62_LDD_4 62 /* LCD data pin 4 */ |
| #define GPIO63_LDD_5 63 /* LCD data pin 5 */ |
| #define GPIO64_LDD_6 64 /* LCD data pin 6 */ |
| #define GPIO65_LDD_7 65 /* LCD data pin 7 */ |
| #define GPIO66_LDD_8 66 /* LCD data pin 8 */ |
| #define GPIO66_MBREQ 66 /* alternate bus master req */ |
| #define GPIO67_LDD_9 67 /* LCD data pin 9 */ |
| #define GPIO67_MMCCS0 67 /* MMC Chip Select 0 */ |
| #define GPIO68_LDD_10 68 /* LCD data pin 10 */ |
| #define GPIO68_MMCCS1 68 /* MMC Chip Select 1 */ |
| #define GPIO69_LDD_11 69 /* LCD data pin 11 */ |
| #define GPIO69_MMCCLK 69 /* MMC_CLK */ |
| #define GPIO70_LDD_12 70 /* LCD data pin 12 */ |
| #define GPIO70_RTCCLK 70 /* Real Time clock (1 Hz) */ |
| #define GPIO71_LDD_13 71 /* LCD data pin 13 */ |
| #define GPIO71_3_6MHz 71 /* 3.6 MHz Oscillator clock */ |
| #define GPIO72_LDD_14 72 /* LCD data pin 14 */ |
| #define GPIO72_32kHz 72 /* 32 kHz clock */ |
| #define GPIO73_LDD_15 73 /* LCD data pin 15 */ |
| #define GPIO73_MBGNT 73 /* Memory controller grant */ |
| #define GPIO74_LCD_FCLK 74 /* LCD Frame clock */ |
| #define GPIO75_LCD_LCLK 75 /* LCD line clock */ |
| #define GPIO76_LCD_PCLK 76 /* LCD Pixel clock */ |
| #define GPIO77_LCD_ACBIAS 77 /* LCD AC Bias */ |
| #define GPIO78_nCS_2 78 /* chip select 2 */ |
| #define GPIO79_nCS_3 79 /* chip select 3 */ |
| #define GPIO80_nCS_4 80 /* chip select 4 */ |
| |
| /* GPIO alternate function mode & direction */ |
| |
| #define GPIO_IN 0x000 |
| #define GPIO_OUT 0x080 |
| #define GPIO_ALT_FN_1_IN 0x100 |
| #define GPIO_ALT_FN_1_OUT 0x180 |
| #define GPIO_ALT_FN_2_IN 0x200 |
| #define GPIO_ALT_FN_2_OUT 0x280 |
| #define GPIO_ALT_FN_3_IN 0x300 |
| #define GPIO_ALT_FN_3_OUT 0x380 |
| #define GPIO_MD_MASK_NR 0x07f |
| #define GPIO_MD_MASK_DIR 0x080 |
| #define GPIO_MD_MASK_FN 0x300 |
| |
| #define GPIO1_RTS_MD ( 1 | GPIO_ALT_FN_1_IN) |
| #define GPIO6_MMCCLK_MD ( 6 | GPIO_ALT_FN_1_OUT) |
| #define GPIO8_48MHz_MD ( 8 | GPIO_ALT_FN_1_OUT) |
| #define GPIO8_MMCCS0_MD ( 8 | GPIO_ALT_FN_1_OUT) |
| #define GPIO9_MMCCS1_MD ( 9 | GPIO_ALT_FN_1_OUT) |
| #define GPIO10_RTCCLK_MD (10 | GPIO_ALT_FN_1_OUT) |
| #define GPIO11_3_6MHz_MD (11 | GPIO_ALT_FN_1_OUT) |
| #define GPIO12_32KHz_MD (12 | GPIO_ALT_FN_1_OUT) |
| #define GPIO13_MBGNT_MD (13 | GPIO_ALT_FN_2_OUT) |
| #define GPIO14_MBREQ_MD (14 | GPIO_ALT_FN_1_IN) |
| #define GPIO15_nCS_1_MD (15 | GPIO_ALT_FN_2_OUT) |
| #define GPIO16_PWM0_MD (16 | GPIO_ALT_FN_2_OUT) |
| #define GPIO17_PWM1_MD (17 | GPIO_ALT_FN_2_OUT) |
| #define GPIO18_RDY_MD (18 | GPIO_ALT_FN_1_IN) |
| #define GPIO19_DREQ1_MD (19 | GPIO_ALT_FN_1_IN) |
| #define GPIO20_DREQ0_MD (20 | GPIO_ALT_FN_1_IN) |
| #define GPIO23_SCLK_md (23 | GPIO_ALT_FN_2_OUT) |
| #define GPIO24_SFRM_MD (24 | GPIO_ALT_FN_2_OUT) |
| #define GPIO25_STXD_MD (25 | GPIO_ALT_FN_2_OUT) |
| #define GPIO26_SRXD_MD (26 | GPIO_ALT_FN_1_IN) |
| #define GPIO27_SEXTCLK_MD (27 | GPIO_ALT_FN_1_IN) |
| #define GPIO28_BITCLK_AC97_MD (28 | GPIO_ALT_FN_1_IN) |
| #define GPIO28_BITCLK_I2S_MD (28 | GPIO_ALT_FN_2_IN) |
| #define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN) |
| #define GPIO29_SDATA_IN_I2S_MD (29 | GPIO_ALT_FN_2_IN) |
| #define GPIO30_SDATA_OUT_AC97_MD (30 | GPIO_ALT_FN_2_OUT) |
| #define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT) |
| #define GPIO31_SYNC_AC97_MD (31 | GPIO_ALT_FN_2_OUT) |
| #define GPIO31_SYNC_I2S_MD (31 | GPIO_ALT_FN_1_OUT) |
| #define GPIO32_SDATA_IN1_AC97_MD (32 | GPIO_ALT_FN_1_IN) |
| #define GPIO33_nCS_5_MD (33 | GPIO_ALT_FN_2_OUT) |
| #define GPIO34_FFRXD_MD (34 | GPIO_ALT_FN_1_IN) |
| #define GPIO34_MMCCS0_MD (34 | GPIO_ALT_FN_2_OUT) |
| #define GPIO35_FFCTS_MD (35 | GPIO_ALT_FN_1_IN) |
| #define GPIO36_FFDCD_MD (36 | GPIO_ALT_FN_1_IN) |
| #define GPIO37_FFDSR_MD (37 | GPIO_ALT_FN_1_IN) |
| #define GPIO38_FFRI_MD (38 | GPIO_ALT_FN_1_IN) |
| #define GPIO39_MMCCS1_MD (39 | GPIO_ALT_FN_1_OUT) |
| #define GPIO39_FFTXD_MD (39 | GPIO_ALT_FN_2_OUT) |
| #define GPIO40_FFDTR_MD (40 | GPIO_ALT_FN_2_OUT) |
| #define GPIO41_FFRTS_MD (41 | GPIO_ALT_FN_2_OUT) |
| #define GPIO42_BTRXD_MD (42 | GPIO_ALT_FN_1_IN) |
| #define GPIO43_BTTXD_MD (43 | GPIO_ALT_FN_2_OUT) |
| #define GPIO44_BTCTS_MD (44 | GPIO_ALT_FN_1_IN) |
| #define GPIO45_BTRTS_MD (45 | GPIO_ALT_FN_2_OUT) |
| #define GPIO46_ICPRXD_MD (46 | GPIO_ALT_FN_1_IN) |
| #define GPIO46_STRXD_MD (46 | GPIO_ALT_FN_2_IN) |
| #define GPIO47_ICPTXD_MD (47 | GPIO_ALT_FN_2_OUT) |
| #define GPIO47_STTXD_MD (47 | GPIO_ALT_FN_1_OUT) |
| #define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) |
| #define GPIO49_nPWE_MD (49 | GPIO_ALT_FN_2_OUT) |
| #define GPIO50_nPIOR_MD (50 | GPIO_ALT_FN_2_OUT) |
| #define GPIO51_nPIOW_MD (51 | GPIO_ALT_FN_2_OUT) |
| #define GPIO52_nPCE_1_MD (52 | GPIO_ALT_FN_2_OUT) |
| #define GPIO53_nPCE_2_MD (53 | GPIO_ALT_FN_2_OUT) |
| #define GPIO53_MMCCLK_MD (53 | GPIO_ALT_FN_1_OUT) |
| #define GPIO54_MMCCLK_MD (54 | GPIO_ALT_FN_1_OUT) |
| #define GPIO54_pSKTSEL_MD (54 | GPIO_ALT_FN_2_OUT) |
| #define GPIO55_nPREG_MD (55 | GPIO_ALT_FN_2_OUT) |
| #define GPIO56_nPWAIT_MD (56 | GPIO_ALT_FN_1_IN) |
| #define GPIO57_nIOIS16_MD (57 | GPIO_ALT_FN_1_IN) |
| #define GPIO58_LDD_0_MD (58 | GPIO_ALT_FN_2_OUT) |
| #define GPIO59_LDD_1_MD (59 | GPIO_ALT_FN_2_OUT) |
| #define GPIO60_LDD_2_MD (60 | GPIO_ALT_FN_2_OUT) |
| #define GPIO61_LDD_3_MD (61 | GPIO_ALT_FN_2_OUT) |
| #define GPIO62_LDD_4_MD (62 | GPIO_ALT_FN_2_OUT) |
| #define GPIO63_LDD_5_MD (63 | GPIO_ALT_FN_2_OUT) |
| #define GPIO64_LDD_6_MD (64 | GPIO_ALT_FN_2_OUT) |
| #define GPIO65_LDD_7_MD (65 | GPIO_ALT_FN_2_OUT) |
| #define GPIO66_LDD_8_MD (66 | GPIO_ALT_FN_2_OUT) |
| #define GPIO66_MBREQ_MD (66 | GPIO_ALT_FN_1_IN) |
| #define GPIO67_LDD_9_MD (67 | GPIO_ALT_FN_2_OUT) |
| #define GPIO67_MMCCS0_MD (67 | GPIO_ALT_FN_1_OUT) |
| #define GPIO68_LDD_10_MD (68 | GPIO_ALT_FN_2_OUT) |
| #define GPIO68_MMCCS1_MD (68 | GPIO_ALT_FN_1_OUT) |
| #define GPIO69_LDD_11_MD (69 | GPIO_ALT_FN_2_OUT) |
| #define GPIO69_MMCCLK_MD (69 | GPIO_ALT_FN_1_OUT) |
| #define GPIO70_LDD_12_MD (70 | GPIO_ALT_FN_2_OUT) |
| #define GPIO70_RTCCLK_MD (70 | GPIO_ALT_FN_1_OUT) |
| #define GPIO71_LDD_13_MD (71 | GPIO_ALT_FN_2_OUT) |
| #define GPIO71_3_6MHz_MD (71 | GPIO_ALT_FN_1_OUT) |
| #define GPIO72_LDD_14_MD (72 | GPIO_ALT_FN_2_OUT) |
| #define GPIO72_32kHz_MD (72 | GPIO_ALT_FN_1_OUT) |
| #define GPIO73_LDD_15_MD (73 | GPIO_ALT_FN_2_OUT) |
| #define GPIO73_MBGNT_MD (73 | GPIO_ALT_FN_1_OUT) |
| #define GPIO74_LCD_FCLK_MD (74 | GPIO_ALT_FN_2_OUT) |
| #define GPIO75_LCD_LCLK_MD (75 | GPIO_ALT_FN_2_OUT) |
| #define GPIO76_LCD_PCLK_MD (76 | GPIO_ALT_FN_2_OUT) |
| #define GPIO77_LCD_ACBIAS_MD (77 | GPIO_ALT_FN_2_OUT) |
| #define GPIO78_nCS_2_MD (78 | GPIO_ALT_FN_2_OUT) |
| #define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT) |
| #define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT) |
| |
| #define GPIO117_SCL (117 | GPIO_ALT_FN_1_OUT) |
| #define GPIO118_SDA (118 | GPIO_ALT_FN_1_OUT) |
| |
| /* |
| * Power Manager |
| */ |
| #ifdef CONFIG_CPU_MONAHANS |
| |
| #define ASCR __REG(0x40F40000) /* Application Subsystem Power Status/Control Register */ |
| #define ARSR __REG(0x40F40004) /* Application Subsystem Reset Status Register */ |
| #define AD3ER __REG(0x40F40008) /* Application Subsystem D3 state Wakeup Enable Register */ |
| #define AD3SR __REG(0x40F4000C) /* Application Subsystem D3 state Wakeup Status Register */ |
| #define AD2D0ER __REG(0x40F40010) /* Application Subsystem D2 to D0 state Wakeup Enable Register */ |
| #define AD2D0SR __REG(0x40F40014) /* Application Subsystem D2 to D0 state Wakeup Status Register */ |
| #define AD2D1ER __REG(0x40F40018) /* Application Subsystem D2 to D1 state Wakeup Enable Register */ |
| #define AD2D1SR __REG(0x40F4001C) /* Application Subsystem D2 to D1 state Wakeup Status Register */ |
| #define AD1D0ER __REG(0x40F40020) /* Application Subsystem D1 to D0 state Wakeup Enable Register */ |
| #define AD1D0SR __REG(0x40F40024) /* Application Subsystem D1 to D0 state Wakeup Status Register */ |
| #define ASDCNT __REG(0x40F40028) /* Application Subsystem SRAM Drowsy Count Register */ |
| #define AD3R __REG(0x40F40030) /* Application Subsystem D3 State Configuration Register */ |
| #define AD2R __REG(0x40F40034) /* Application Subsystem D2 State Configuration Register */ |
| #define AD1R __REG(0x40F40038) /* Application Subsystem D1 State Configuration Register */ |
| |
| #define PMCR __REG(0x40F50000) /* Power Manager Control Register */ |
| #define PSR __REG(0x40F50004) /* Power Manager S2 Status Register */ |
| #define PSPR __REG(0x40F50008) /* Power Manager Scratch Pad Register */ |
| #define PCFR __REG(0x40F5000C) /* Power Manager General Configuration Register */ |
| #define PWER __REG(0x40F50010) /* Power Manager Wake-up Enable Register */ |
| #define PWSR __REG(0x40F50014) /* Power Manager Wake-up Status Register */ |
| #define PECR __REG(0x40F50018) /* Power Manager EXT_WAKEUP[1:0] Control Register */ |
| #define DCDCSR __REG(0x40F50080) /* DC-DC Controller Status Register */ |
| #define PVCR __REG(0x40F50100) /* Power Manager Voltage Change Control Register */ |
| #define PCMD(x) __REG(0x40F50110 + x*4) |
| #define PCMD0 __REG(0x40F50110 + 0 * 4) |
| #define PCMD1 __REG(0x40F50110 + 1 * 4) |
| #define PCMD2 __REG(0x40F50110 + 2 * 4) |
| #define PCMD3 __REG(0x40F50110 + 3 * 4) |
| #define PCMD4 __REG(0x40F50110 + 4 * 4) |
| #define PCMD5 __REG(0x40F50110 + 5 * 4) |
| #define PCMD6 __REG(0x40F50110 + 6 * 4) |
| #define PCMD7 __REG(0x40F50110 + 7 * 4) |
| #define PCMD8 __REG(0x40F50110 + 8 * 4) |
| #define PCMD9 __REG(0x40F50110 + 9 * 4) |
| #define PCMD10 __REG(0x40F50110 + 10 * 4) |
| #define PCMD11 __REG(0x40F50110 + 11 * 4) |
| #define PCMD12 __REG(0x40F50110 + 12 * 4) |
| #define PCMD13 __REG(0x40F50110 + 13 * 4) |
| #define PCMD14 __REG(0x40F50110 + 14 * 4) |
| #define PCMD15 __REG(0x40F50110 + 15 * 4) |
| #define PCMD16 __REG(0x40F50110 + 16 * 4) |
| #define PCMD17 __REG(0x40F50110 + 17 * 4) |
| #define PCMD18 __REG(0x40F50110 + 18 * 4) |
| #define PCMD19 __REG(0x40F50110 + 19 * 4) |
| #define PCMD20 __REG(0x40F50110 + 20 * 4) |
| #define PCMD21 __REG(0x40F50110 + 21 * 4) |
| #define PCMD22 __REG(0x40F50110 + 22 * 4) |
| #define PCMD23 __REG(0x40F50110 + 23 * 4) |
| #define PCMD24 __REG(0x40F50110 + 24 * 4) |
| #define PCMD25 __REG(0x40F50110 + 25 * 4) |
| #define PCMD26 __REG(0x40F50110 + 26 * 4) |
| #define PCMD27 __REG(0x40F50110 + 27 * 4) |
| #define PCMD28 __REG(0x40F50110 + 28 * 4) |
| #define PCMD29 __REG(0x40F50110 + 29 * 4) |
| #define PCMD30 __REG(0x40F50110 + 30 * 4) |
| #define PCMD31 __REG(0x40F50110 + 31 * 4) |
| |
| #define PCMD_MBC (1<<12) |
| #define PCMD_DCE (1<<11) |
| #define PCMD_LC (1<<10) |
| #define PCMD_SQC (3<<8) /* only 00 and 01 are valid */ |
| |
| #define PVCR_FVC (0x1 << 28) |
| #define PVCR_VCSA (0x1<<14) |
| #define PVCR_CommandDelay (0xf80) |
| #define PVCR_ReadPointer (0x01f00000) |
| #define PVCR_SlaveAddress (0x7f) |
| |
| #else /* ifdef CONFIG_CPU_MONAHANS */ |
| |
| #define PMCR __REG(0x40F00000) /* Power Manager Control Register */ |
| #define PSSR __REG(0x40F00004) /* Power Manager Sleep Status Register */ |
| #define PSPR __REG(0x40F00008) /* Power Manager Scratch Pad Register */ |
| #define PWER __REG(0x40F0000C) /* Power Manager Wake-up Enable Register */ |
| #define PRER __REG(0x40F00010) /* Power Manager GPIO Rising-Edge Detect Enable Register */ |
| #define PFER __REG(0x40F00014) /* Power Manager GPIO Falling-Edge Detect Enable Register */ |
| #define PEDR __REG(0x40F00018) /* Power Manager GPIO Edge Detect Status Register */ |
| #define PCFR __REG(0x40F0001C) /* Power Manager General Configuration Register */ |
| #define PGSR0 __REG(0x40F00020) /* Power Manager GPIO Sleep State Register for GP[31-0] */ |
| #define PGSR1 __REG(0x40F00024) /* Power Manager GPIO Sleep State Register for GP[63-32] */ |
| #define PGSR2 __REG(0x40F00028) /* Power Manager GPIO Sleep State Register for GP[84-64] */ |
| #define PGSR3 __REG(0x40F0002C) /* Power Manager GPIO Sleep State Register for GP[118-96] */ |
| #define RCSR __REG(0x40F00030) /* Reset Controller Status Register */ |
| |
| #define PSLR __REG(0x40F00034) /* Power Manager Sleep Config Register */ |
| #define PSTR __REG(0x40F00038) /* Power Manager Standby Config Register */ |
| #define PSNR __REG(0x40F0003C) /* Power Manager Sense Config Register */ |
| #define PVCR __REG(0x40F00040) /* Power Manager VoltageControl Register */ |
| #define PKWR __REG(0x40F00050) /* Power Manager KB Wake-up Enable Reg */ |
| #define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Register */ |
| #define PCMD(x) __REG(0x40F00080 + x*4) |
| #define PCMD0 __REG(0x40F00080 + 0 * 4) |
| #define PCMD1 __REG(0x40F00080 + 1 * 4) |
| #define PCMD2 __REG(0x40F00080 + 2 * 4) |
| #define PCMD3 __REG(0x40F00080 + 3 * 4) |
| #define PCMD4 __REG(0x40F00080 + 4 * 4) |
| #define PCMD5 __REG(0x40F00080 + 5 * 4) |
| #define PCMD6 __REG(0x40F00080 + 6 * 4) |
| #define PCMD7 __REG(0x40F00080 + 7 * 4) |
| #define PCMD8 __REG(0x40F00080 + 8 * 4) |
| #define PCMD9 __REG(0x40F00080 + 9 * 4) |
| #define PCMD10 __REG(0x40F00080 + 10 * 4) |
| #define PCMD11 __REG(0x40F00080 + 11 * 4) |
| #define PCMD12 __REG(0x40F00080 + 12 * 4) |
| #define PCMD13 __REG(0x40F00080 + 13 * 4) |
| #define PCMD14 __REG(0x40F00080 + 14 * 4) |
| #define PCMD15 __REG(0x40F00080 + 15 * 4) |
| #define PCMD16 __REG(0x40F00080 + 16 * 4) |
| #define PCMD17 __REG(0x40F00080 + 17 * 4) |
| #define PCMD18 __REG(0x40F00080 + 18 * 4) |
| #define PCMD19 __REG(0x40F00080 + 19 * 4) |
| #define PCMD20 __REG(0x40F00080 + 20 * 4) |
| #define PCMD21 __REG(0x40F00080 + 21 * 4) |
| #define PCMD22 __REG(0x40F00080 + 22 * 4) |
| #define PCMD23 __REG(0x40F00080 + 23 * 4) |
| #define PCMD24 __REG(0x40F00080 + 24 * 4) |
| #define PCMD25 __REG(0x40F00080 + 25 * 4) |
| #define PCMD26 __REG(0x40F00080 + 26 * 4) |
| #define PCMD27 __REG(0x40F00080 + 27 * 4) |
| #define PCMD28 __REG(0x40F00080 + 28 * 4) |
| #define PCMD29 __REG(0x40F00080 + 29 * 4) |
| #define PCMD30 __REG(0x40F00080 + 30 * 4) |
| #define PCMD31 __REG(0x40F00080 + 31 * 4) |
| |
| #define PCMD_MBC (1<<12) |
| #define PCMD_DCE (1<<11) |
| #define PCMD_LC (1<<10) |
| /* FIXME: PCMD_SQC need be checked. */ |
| #define PCMD_SQC (3<<8) /* currently only bit 8 is changerable, */ |
| /* bit 9 should be 0 all day. */ |
| #define PVCR_VCSA (0x1<<14) |
| #define PVCR_CommandDelay (0xf80) |
| /* define MACRO for Power Manager General Configuration Register (PCFR) */ |
| #define PCFR_FVC (0x1 << 10) |
| #define PCFR_PI2C_EN (0x1 << 6) |
| |
| #define PSSR_OTGPH (1 << 6) /* OTG Peripheral control Hold */ |
| #define PSSR_RDH (1 << 5) /* Read Disable Hold */ |
| #define PSSR_PH (1 << 4) /* Peripheral Control Hold */ |
| #define PSSR_VFS (1 << 2) /* VDD Fault Status */ |
| #define PSSR_BFS (1 << 1) /* Battery Fault Status */ |
| #define PSSR_SSS (1 << 0) /* Software Sleep Status */ |
| |
| #define PCFR_DS (1 << 3) /* Deep Sleep Mode */ |
| #define PCFR_FS (1 << 2) /* Float Static Chip Selects */ |
| #define PCFR_FP (1 << 1) /* Float PCMCIA controls */ |
| #define PCFR_OPDE (1 << 0) /* 3.6864 MHz oscillator power-down enable */ |
| |
| #define RCSR_GPR (1 << 3) /* GPIO Reset */ |
| #define RCSR_SMR (1 << 2) /* Sleep Mode */ |
| #define RCSR_WDR (1 << 1) /* Watchdog Reset */ |
| #define RCSR_HWR (1 << 0) /* Hardware Reset */ |
| |
| #endif /* CONFIG_CPU_MONAHANS */ |
| |
| /* |
| * SSP Serial Port Registers |
| */ |
| #define SSCR0 __REG(0x41000000) /* SSP Control Register 0 */ |
| #define SSCR1 __REG(0x41000004) /* SSP Control Register 1 */ |
| #define SSSR __REG(0x41000008) /* SSP Status Register */ |
| #define SSITR __REG(0x4100000C) /* SSP Interrupt Test Register */ |
| #define SSDR __REG(0x41000010) /* (Write / Read) SSP Data Write Register/SSP Data Read Register */ |
| |
| /* |
| * MultiMediaCard (MMC) controller |
| */ |
| #define MMC_STRPCL __REG(0x41100000) /* Control to start and stop MMC clock */ |
| #define MMC_STAT __REG(0x41100004) /* MMC Status Register (read only) */ |
| #define MMC_CLKRT __REG(0x41100008) /* MMC clock rate */ |
| #define MMC_SPI __REG(0x4110000c) /* SPI mode control bits */ |
| #define MMC_CMDAT __REG(0x41100010) /* Command/response/data sequence control */ |
| #define MMC_RESTO __REG(0x41100014) /* Expected response time out */ |
| #define MMC_RDTO __REG(0x41100018) /* Expected data read time out */ |
| #define MMC_BLKLEN __REG(0x4110001c) /* Block length of data transaction */ |
| #define MMC_NOB __REG(0x41100020) /* Number of blocks, for block mode */ |
| #define MMC_PRTBUF __REG(0x41100024) /* Partial MMC_TXFIFO FIFO written */ |
| #define MMC_I_MASK __REG(0x41100028) /* Interrupt Mask */ |
| #define MMC_I_REG __REG(0x4110002c) /* Interrupt Register (read only) */ |
| #define MMC_CMD __REG(0x41100030) /* Index of current command */ |
| #define MMC_ARGH __REG(0x41100034) /* MSW part of the current command argument */ |
| #define MMC_ARGL __REG(0x41100038) /* LSW part of the current command argument */ |
| #define MMC_RES __REG(0x4110003c) /* Response FIFO (read only) */ |
| #define MMC_RXFIFO __REG(0x41100040) /* Receive FIFO (read only) */ |
| #define MMC_TXFIFO __REG(0x41100044) /* Transmit FIFO (write only) */ |
| |
| /* |
| * Core Clock |
| */ |
| |
| #if defined(CONFIG_CPU_MONAHANS) |
| #define ACCR __REG(0x41340000) /* Application Subsystem Clock Configuration Register */ |
| #define ACSR __REG(0x41340004) /* Application Subsystem Clock Status Register */ |
| #define AICSR __REG(0x41340008) /* Application Subsystem Interrupt Control/Status Register */ |
| #define CKENA __REG(0x4134000C) /* A Clock Enable Register */ |
| #define CKENB __REG(0x41340010) /* B Clock Enable Register */ |
| #define AC97_DIV __REG(0x41340014) /* AC97 clock divisor value register */ |
| |
| #define ACCR_SMC_MASK 0x03800000 /* Static Memory Controller Frequency Select */ |
| #define ACCR_SRAM_MASK 0x000c0000 /* SRAM Controller Frequency Select */ |
| #define ACCR_FC_MASK 0x00030000 /* Frequency Change Frequency Select */ |
| #define ACCR_HSIO_MASK 0x0000c000 /* High Speed IO Frequency Select */ |
| #define ACCR_DDR_MASK 0x00003000 /* DDR Memory Controller Frequency Select */ |
| #define ACCR_XN_MASK 0x00000700 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ |
| #define ACCR_XL_MASK 0x0000001f /* Crystal Frequency to Memory Frequency Multiplier */ |
| #define ACCR_XPDIS (1 << 31) |
| #define ACCR_SPDIS (1 << 30) |
| #define ACCR_13MEND1 (1 << 27) |
| #define ACCR_D0CS (1 << 26) |
| #define ACCR_13MEND2 (1 << 21) |
| #define ACCR_PCCE (1 << 11) |
| |
| #define CKENA_30_MSL0 (1 << 30) /* MSL0 Interface Unit Clock Enable */ |
| #define CKENA_29_SSP4 (1 << 29) /* SSP3 Unit Clock Enable */ |
| #define CKENA_28_SSP3 (1 << 28) /* SSP2 Unit Clock Enable */ |
| #define CKENA_27_SSP2 (1 << 27) /* SSP1 Unit Clock Enable */ |
| #define CKENA_26_SSP1 (1 << 26) /* SSP0 Unit Clock Enable */ |
| #define CKENA_25_TSI (1 << 25) /* TSI Clock Enable */ |
| #define CKENA_24_AC97 (1 << 24) /* AC97 Unit Clock Enable */ |
| #define CKENA_23_STUART (1 << 23) /* STUART Unit Clock Enable */ |
| #define CKENA_22_FFUART (1 << 22) /* FFUART Unit Clock Enable */ |
| #define CKENA_21_BTUART (1 << 21) /* BTUART Unit Clock Enable */ |
| #define CKENA_20_UDC (1 << 20) /* UDC Clock Enable */ |
| #define CKENA_19_TPM (1 << 19) /* TPM Unit Clock Enable */ |
| #define CKENA_18_USIM1 (1 << 18) /* USIM1 Unit Clock Enable */ |
| #define CKENA_17_USIM0 (1 << 17) /* USIM0 Unit Clock Enable */ |
| #define CKENA_15_CIR (1 << 15) /* Consumer IR Clock Enable */ |
| #define CKENA_14_KEY (1 << 14) /* Keypad Controller Clock Enable */ |
| #define CKENA_13_MMC1 (1 << 13) /* MMC1 Clock Enable */ |
| #define CKENA_12_MMC0 (1 << 12) /* MMC0 Clock Enable */ |
| #define CKENA_11_FLASH (1 << 11) /* Boot ROM Clock Enable */ |
| #define CKENA_10_SRAM (1 << 10) /* SRAM Controller Clock Enable */ |
| #define CKENA_9_SMC (1 << 9) /* Static Memory Controller */ |
| #define CKENA_8_DMC (1 << 8) /* Dynamic Memory Controller */ |
| #define CKENA_7_GRAPHICS (1 << 7) /* 2D Graphics Clock Enable */ |
| #define CKENA_6_USBCLI (1 << 6) /* USB Client Unit Clock Enable */ |
| #define CKENA_4_NAND (1 << 4) /* NAND Flash Controller Clock Enable */ |
| #define CKENA_3_CAMERA (1 << 3) /* Camera Interface Clock Enable */ |
| #define CKENA_2_USBHOST (1 << 2) /* USB Host Unit Clock Enable */ |
| #define CKENA_1_LCD (1 << 1) /* LCD Unit Clock Enable */ |
| |
| #define CKENB_9_SYSBUS2 (1 << 9) /* System bus 2 */ |
| #define CKENB_8_1WIRE (1 << 8) /* One Wire Interface Unit Clock Enable */ |
| #define CKENB_7_GPIO (1 << 7) /* GPIO Clock Enable */ |
| #define CKENB_6_IRQ (1 << 6) /* Interrupt Controller Clock Enable */ |
| #define CKENB_4_I2C (1 << 4) /* I2C Unit Clock Enable */ |
| #define CKENB_1_PWM1 (1 << 1) /* PWM2 & PWM3 Clock Enable */ |
| #define CKENB_0_PWM0 (1 << 0) /* PWM0 & PWM1 Clock Enable */ |
| |
| #else /* if defined CONFIG_CPU_MONAHANS */ |
| |
| #define CCCR __REG(0x41300000) /* Core Clock Configuration Register */ |
| #define CKEN __REG(0x41300004) /* Clock Enable Register */ |
| #define OSCC __REG(0x41300008) /* Oscillator Configuration Register */ |
| |
| #define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ |
| #if !defined(CONFIG_PXA27X) |
| #define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */ |
| #endif |
| #define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */ |
| |
| #define CKEN24_CAMERA (1 << 24) /* Camera Interface Clock Enable */ |
| #define CKEN23_SSP1 (1 << 23) /* SSP1 Unit Clock Enable */ |
| #define CKEN22_MEMC (1 << 22) /* Memory Controller Clock Enable */ |
| #define CKEN21_MEMSTK (1 << 21) /* Memory Stick Host Controller */ |
| #define CKEN20_IM (1 << 20) /* Internal Memory Clock Enable */ |
| #define CKEN19_KEYPAD (1 << 19) /* Keypad Interface Clock Enable */ |
| #define CKEN18_USIM (1 << 18) /* USIM Unit Clock Enable */ |
| #define CKEN17_MSL (1 << 17) /* MSL Unit Clock Enable */ |
| #define CKEN16_LCD (1 << 16) /* LCD Unit Clock Enable */ |
| #define CKEN15_PWRI2C (1 << 15) /* PWR I2C Unit Clock Enable */ |
| #define CKEN14_I2C (1 << 14) /* I2C Unit Clock Enable */ |
| #define CKEN13_FICP (1 << 13) /* FICP Unit Clock Enable */ |
| #define CKEN12_MMC (1 << 12) /* MMC Unit Clock Enable */ |
| #define CKEN11_USB (1 << 11) /* USB Unit Clock Enable */ |
| #if defined(CONFIG_PXA27X) |
| #define CKEN10_USBHOST (1 << 10) /* USB Host Unit Clock Enable */ |
| #define CKEN24_CAMERA (1 << 24) /* Camera Unit Clock Enable */ |
| #endif |
| #define CKEN8_I2S (1 << 8) /* I2S Unit Clock Enable */ |
| #define CKEN7_BTUART (1 << 7) /* BTUART Unit Clock Enable */ |
| #define CKEN6_FFUART (1 << 6) /* FFUART Unit Clock Enable */ |
| #define CKEN5_STUART (1 << 5) /* STUART Unit Clock Enable */ |
| #define CKEN3_SSP (1 << 3) /* SSP Unit Clock Enable */ |
| #define CKEN2_AC97 (1 << 2) /* AC97 Unit Clock Enable */ |
| #define CKEN1_PWM1 (1 << 1) /* PWM1 Clock Enable */ |
| #define CKEN0_PWM0 (1 << 0) /* PWM0 Clock Enable */ |
| |
| #define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */ |
| #define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */ |
| |
| #if !defined(CONFIG_PXA27X) |
| #define CCCR_L09 (0x1F) |
| #define CCCR_L27 (0x1) |
| #define CCCR_L32 (0x2) |
| #define CCCR_L36 (0x3) |
| #define CCCR_L40 (0x4) |
| #define CCCR_L45 (0x5) |
| |
| #define CCCR_M1 (0x1 << 5) |
| #define CCCR_M2 (0x2 << 5) |
| #define CCCR_M4 (0x3 << 5) |
| |
| #define CCCR_N10 (0x2 << 7) |
| #define CCCR_N15 (0x3 << 7) |
| #define CCCR_N20 (0x4 << 7) |
| #define CCCR_N25 (0x5 << 7) |
| #define CCCR_N30 (0x6 << 7) |
| #endif |
| |
| #endif /* CONFIG_CPU_MONAHANS */ |
| |
| /* |
| * LCD |
| */ |
| #define LCCR0 __REG(0x44000000) /* LCD Controller Control Register 0 */ |
| #define LCCR1 __REG(0x44000004) /* LCD Controller Control Register 1 */ |
| #define LCCR2 __REG(0x44000008) /* LCD Controller Control Register 2 */ |
| #define LCCR3 __REG(0x4400000C) /* LCD Controller Control Register 3 */ |
| #define DFBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */ |
| #define DFBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */ |
| #define LCSR0 __REG(0x44000038) /* LCD Controller Status Register */ |
| #define LCSR1 __REG(0x44000034) /* LCD Controller Status Register */ |
| #define LIIDR __REG(0x4400003C) /* LCD Controller Interrupt ID Register */ |
| #define TMEDRGBR __REG(0x44000040) /* TMED RGB Seed Register */ |
| #define TMEDCR __REG(0x44000044) /* TMED Control Register */ |
| |
| #define FDADR0 __REG(0x44000200) /* DMA Channel 0 Frame Descriptor Address Register */ |
| #define FSADR0 __REG(0x44000204) /* DMA Channel 0 Frame Source Address Register */ |
| #define FIDR0 __REG(0x44000208) /* DMA Channel 0 Frame ID Register */ |
| #define LDCMD0 __REG(0x4400020C) /* DMA Channel 0 Command Register */ |
| #define FDADR1 __REG(0x44000210) /* DMA Channel 1 Frame Descriptor Address Register */ |
| #define FSADR1 __REG(0x44000214) /* DMA Channel 1 Frame Source Address Register */ |
| #define FIDR1 __REG(0x44000218) /* DMA Channel 1 Frame ID Register */ |
| #define LDCMD1 __REG(0x4400021C) /* DMA Channel 1 Command Register */ |
| |
| #define LCCR0_ENB (1 << 0) /* LCD Controller enable */ |
| #define LCCR0_CMS (1 << 1) /* Color = 0, Monochrome = 1 */ |
| #define LCCR0_SDS (1 << 2) /* Single Panel = 0, Dual Panel = 1 */ |
| #define LCCR0_LDM (1 << 3) /* LCD Disable Done Mask */ |
| #define LCCR0_SFM (1 << 4) /* Start of frame mask */ |
| #define LCCR0_IUM (1 << 5) /* Input FIFO underrun mask */ |
| #define LCCR0_EFM (1 << 6) /* End of Frame mask */ |
| #define LCCR0_PAS (1 << 7) /* Passive = 0, Active = 1 */ |
| #define LCCR0_BLE (1 << 8) /* Little Endian = 0, Big Endian = 1 */ |
| #define LCCR0_DPD (1 << 9) /* Double Pixel mode, 4 pixel value = 0, 8 pixle values = 1 */ |
| #define LCCR0_DIS (1 << 10) /* LCD Disable */ |
| #define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */ |
| #define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */ |
| #define LCCR0_PDD_S 12 |
| #define LCCR0_BM (1 << 20) /* Branch mask */ |
| #define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */ |
| #if defined(CONFIG_PXA27X) |
| #define LCCR0_LCDT (1 << 22) /* LCD Panel Type */ |
| #define LCCR0_RDSTM (1 << 23) /* Read Status Interrupt Mask */ |
| #define LCCR0_CMDIM (1 << 24) /* Command Interrupt Mask */ |
| #endif |
| |
| #define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */ |
| #define LCCR1_DisWdth(Pixel) /* Display Width [1..800 pix.] */ \ |
| (((Pixel) - 1) << FShft (LCCR1_PPL)) |
| |
| #define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */ |
| #define LCCR1_HorSnchWdth(Tpix) /* Horizontal Synchronization */ \ |
| /* pulse Width [1..64 Tpix] */ \ |
| (((Tpix) - 1) << FShft (LCCR1_HSW)) |
| |
| #define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait */ |
| /* count - 1 [Tpix] */ |
| #define LCCR1_EndLnDel(Tpix) /* End-of-Line Delay */ \ |
| /* [1..256 Tpix] */ \ |
| (((Tpix) - 1) << FShft (LCCR1_ELW)) |
| |
| #define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */ |
| /* Wait count - 1 [Tpix] */ |
| #define LCCR1_BegLnDel(Tpix) /* Beginning-of-Line Delay */ \ |
| /* [1..256 Tpix] */ \ |
| (((Tpix) - 1) << FShft (LCCR1_BLW)) |
| |
| |
| #define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */ |
| #define LCCR2_DisHght(Line) /* Display Height [1..1024 lines] */ \ |
| (((Line) - 1) << FShft (LCCR2_LPP)) |
| |
| #define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse */ |
| /* Width - 1 [Tln] (L_FCLK) */ |
| #define LCCR2_VrtSnchWdth(Tln) /* Vertical Synchronization pulse */ \ |
| /* Width [1..64 Tln] */ \ |
| (((Tln) - 1) << FShft (LCCR2_VSW)) |
| |
| #define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */ |
| /* count [Tln] */ |
| #define LCCR2_EndFrmDel(Tln) /* End-of-Frame Delay */ \ |
| /* [0..255 Tln] */ \ |
| ((Tln) << FShft (LCCR2_EFW)) |
| |
| #define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */ |
| /* Wait count [Tln] */ |
| #define LCCR2_BegFrmDel(Tln) /* Beginning-of-Frame Delay */ \ |
| /* [0..255 Tln] */ \ |
| ((Tln) << FShft (LCCR2_BFW)) |
| |
| #if 0 |
| #define LCCR3_PCD (0xff) /* Pixel clock divisor */ |
| #define LCCR3_ACB (0xff << 8) /* AC Bias pin frequency */ |
| #define LCCR3_ACB_S 8 |
| #endif |
| |
| #define LCCR3_API (0xf << 16) /* AC Bias pin trasitions per interrupt */ |
| #define LCCR3_API_S 16 |
| #define LCCR3_VSP (1 << 20) /* vertical sync polarity */ |
| #define LCCR3_HSP (1 << 21) /* horizontal sync polarity */ |
| #define LCCR3_PCP (1 << 22) /* pixel clock polarity */ |
| #define LCCR3_OEP (1 << 23) /* output enable polarity */ |
| #if 0 |
| #define LCCR3_BPP (7 << 24) /* bits per pixel */ |
| #define LCCR3_BPP_S 24 |
| #endif |
| #define LCCR3_DPC (1 << 27) /* double pixel clock mode */ |
| |
| #define LCCR3_PDFOR_0 (0 << 30) |
| #define LCCR3_PDFOR_1 (1 << 30) |
| #define LCCR3_PDFOR_2 (2 << 30) |
| #define LCCR3_PDFOR_3 (3 << 30) |
| |
| |
| #define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */ |
| #define LCCR3_PixClkDiv(Div) /* Pixel Clock Divisor */ \ |
| (((Div) << FShft (LCCR3_PCD))) |
| |
| |
| #define LCCR3_BPP Fld (3, 24) /* Bit Per Pixel */ |
| #define LCCR3_Bpp(Bpp) /* Bit Per Pixel */ \ |
| ((((Bpp&0x7) << FShft (LCCR3_BPP)))|(((Bpp&0x8)<<26))) |
| |
| #define LCCR3_ACB Fld (8, 8) /* AC Bias */ |
| #define LCCR3_Acb(Acb) /* BAC Bias */ \ |
| (((Acb) << FShft (LCCR3_ACB))) |
| |
| #define LCCR3_HorSnchH (LCCR3_HSP*0) /* Horizontal Synchronization */ |
| /* pulse active High */ |
| #define LCCR3_HorSnchL (LCCR3_HSP*1) /* Horizontal Synchronization */ |
| |
| #define LCCR3_VrtSnchH (LCCR3_VSP*0) /* Vertical Synchronization pulse */ |
| /* active High */ |
| #define LCCR3_VrtSnchL (LCCR3_VSP*1) /* Vertical Synchronization pulse */ |
| /* active Low */ |
| |
| #define LCSR0_LDD (1 << 0) /* LCD Disable Done */ |
| #define LCSR0_SOF (1 << 1) /* Start of frame */ |
| #define LCSR0_BER (1 << 2) /* Bus error */ |
| #define LCSR0_ABC (1 << 3) /* AC Bias count */ |
| #define LCSR0_IUL (1 << 4) /* input FIFO underrun Lower panel */ |
| #define LCSR0_IUU (1 << 5) /* input FIFO underrun Upper panel */ |
| #define LCSR0_OU (1 << 6) /* output FIFO underrun */ |
| #define LCSR0_QD (1 << 7) /* quick disable */ |
| #define LCSR0_EOF0 (1 << 8) /* end of frame */ |
| #define LCSR0_BS (1 << 9) /* branch status */ |
| #define LCSR0_SINT (1 << 10) /* subsequent interrupt */ |
| |
| #define LCSR1_SOF1 (1 << 0) |
| #define LCSR1_SOF2 (1 << 1) |
| #define LCSR1_SOF3 (1 << 2) |
| #define LCSR1_SOF4 (1 << 3) |
| #define LCSR1_SOF5 (1 << 4) |
| #define LCSR1_SOF6 (1 << 5) |
| |
| #define LCSR1_EOF1 (1 << 8) |
| #define LCSR1_EOF2 (1 << 9) |
| #define LCSR1_EOF3 (1 << 10) |
| #define LCSR1_EOF4 (1 << 11) |
| #define LCSR1_EOF5 (1 << 12) |
| #define LCSR1_EOF6 (1 << 13) |
| |
| #define LCSR1_BS1 (1 << 16) |
| #define LCSR1_BS2 (1 << 17) |
| #define LCSR1_BS3 (1 << 18) |
| #define LCSR1_BS4 (1 << 19) |
| #define LCSR1_BS5 (1 << 20) |
| #define LCSR1_BS6 (1 << 21) |
| |
| #define LCSR1_IU2 (1 << 25) |
| #define LCSR1_IU3 (1 << 26) |
| #define LCSR1_IU4 (1 << 27) |
| #define LCSR1_IU5 (1 << 28) |
| #define LCSR1_IU6 (1 << 29) |
| |
| #define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ |
| #if defined(CONFIG_PXA27X) |
| #define LDCMD_SOFINT (1 << 22) |
| #define LDCMD_EOFINT (1 << 21) |
| #endif |
| |
| /* |
| * Memory controller |
| */ |
| |
| #ifdef CONFIG_CPU_MONAHANS |
| /* Static Memory Controller Registers */ |
| #define MSC0 __REG_2(0x4A000008) /* Static Memory Control Register 0 */ |
| #define MSC1 __REG_2(0x4A00000C) /* Static Memory Control Register 1 */ |
| #define MECR __REG_2(0x4A000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */ |
| #define SXCNFG __REG_2(0x4A00001C) /* Synchronous Static Memory Control Register */ |
| #define MCMEM0 __REG_2(0x4A000028) /* Card interface Common Memory Space Socket 0 Timing */ |
| #define MCATT0 __REG_2(0x4A000030) /* Card interface Attribute Space Socket 0 Timing Configuration */ |
| #define MCIO0 __REG_2(0x4A000038) /* Card interface I/O Space Socket 0 Timing Configuration */ |
| #define MEMCLKCFG __REG_2(0x4A000068) /* SCLK speed configuration */ |
| #define CSADRCFG0 __REG_2(0x4A000080) /* Address Configuration for chip select 0 */ |
| #define CSADRCFG1 __REG_2(0x4A000084) /* Address Configuration for chip select 1 */ |
| #define CSADRCFG2 __REG_2(0x4A000088) /* Address Configuration for chip select 2 */ |
| #define CSADRCFG3 __REG_2(0x4A00008C) /* Address Configuration for chip select 3 */ |
| #define CSADRCFG_P __REG_2(0x4A000090) /* Address Configuration for pcmcia card interface */ |
| #define CSMSADRCFG __REG_2(0x4A0000A0) /* Master Address Configuration Register */ |
| #define CLK_RET_DEL __REG_2(0x4A0000B0) /* Delay line and mux selects for return data latching for sync. flash */ |
| #define ADV_RET_DEL __REG_2(0x4A0000B4) /* Delay line and mux selects for return data latching for sync. flash */ |
| |
| /* Dynamic Memory Controller Registers */ |
| #define MDCNFG __REG_2(0x48100000) /* SDRAM Configuration Register 0 */ |
| #define MDREFR __REG_2(0x48100004) /* SDRAM Refresh Control Register */ |
| #define FLYCNFG __REG_2(0x48100020) /* Fly-by DMA DVAL[1:0] polarities */ |
| #define MDMRS __REG_2(0x48100040) /* MRS value to be written to SDRAM */ |
| #define DDR_SCAL __REG_2(0x48100050) /* Software Delay Line Calibration/Configuration for external DDR memory. */ |
| #define DDR_HCAL __REG_2(0x48100060) /* Hardware Delay Line Calibration/Configuration for external DDR memory. */ |
| #define DDR_WCAL __REG_2(0x48100068) /* DDR Write Strobe Calibration Register */ |
| #define DMCIER __REG_2(0x48100070) /* Dynamic MC Interrupt Enable Register. */ |
| #define DMCISR __REG_2(0x48100078) /* Dynamic MC Interrupt Status Register. */ |
| #define DDR_DLS __REG_2(0x48100080) /* DDR Delay Line Value Status register for external DDR memory. */ |
| #define EMPI __REG_2(0x48100090) /* EMPI Control Register */ |
| #define RCOMP __REG_2(0x48100100) |
| #define PAD_MA __REG_2(0x48100110) |
| #define PAD_MDMSB __REG_2(0x48100114) |
| #define PAD_MDLSB __REG_2(0x48100118) |
| #define PAD_DMEM __REG_2(0x4810011c) |
| #define PAD_SDCLK __REG_2(0x48100120) |
| #define PAD_SDCS __REG_2(0x48100124) |
| #define PAD_SMEM __REG_2(0x48100128) |
| #define PAD_SCLK __REG_2(0x4810012C) |
| #define TAI __REG_2(0x48100F00) /* TAI Tavor Address Isolation Register */ |
| |
| /* Some frequently used bits */ |
| #define MDCNFG_DMAP 0x80000000 /* SDRAM 1GB Memory Map Enable */ |
| #define MDCNFG_DMCEN 0x40000000 /* Enable Dynamic Memory Controller */ |
| #define MDCNFG_HWFREQ 0x20000000 /* Hardware Frequency Change Calibration */ |
| #define MDCNFG_DTYPE 0x400 /* SDRAM Type: 1=DDR SDRAM */ |
| |
| #define MDCNFG_DTC_0 0x0 /* Timing Category of SDRAM */ |
| #define MDCNFG_DTC_1 0x100 |
| #define MDCNFG_DTC_2 0x200 |
| #define MDCNFG_DTC_3 0x300 |
| |
| #define MDCNFG_DRAC_12 0x0 /* Number of Row Access Bits */ |
| #define MDCNFG_DRAC_13 0x20 |
| #define MDCNFG_DRAC_14 0x40 |
| |
| #define MDCNFG_DCAC_9 0x0 /* Number of Column Acess Bits */ |
| #define MDCNFG_DCAC_10 0x08 |
| #define MDCNFG_DCAC_11 0x10 |
| |
| #define MDCNFG_DBW_16 0x4 /* SDRAM Data Bus width 16bit */ |
| #define MDCNFG_DCSE1 0x2 /* SDRAM CS 1 Enable */ |
| #define MDCNFG_DCSE0 0x1 /* SDRAM CS 0 Enable */ |
| |
| |
| /* Data Flash Controller Registers */ |
| |
| #define NDCR __REG(0x43100000) /* Data Flash Control register */ |
| #define NDTR0CS0 __REG(0x43100004) /* Data Controller Timing Parameter 0 Register for ND_nCS0 */ |
| /* #define NDTR0CS1 __REG(0x43100008) /\* Data Controller Timing Parameter 0 Register for ND_nCS1 *\/ */ |
| #define NDTR1CS0 __REG(0x4310000C) /* Data Controller Timing Parameter 1 Register for ND_nCS0 */ |
| /* #define NDTR1CS1 __REG(0x43100010) /\* Data Controller Timing Parameter 1 Register for ND_nCS1 *\/ */ |
| #define NDSR __REG(0x43100014) /* Data Controller Status Register */ |
| #define NDPCR __REG(0x43100018) /* Data Controller Page Count Register */ |
| #define NDBDR0 __REG(0x4310001C) /* Data Controller Bad Block Register 0 */ |
| #define NDBDR1 __REG(0x43100020) /* Data Controller Bad Block Register 1 */ |
| #define NDDB __REG(0x43100040) /* Data Controller Data Buffer */ |
| #define NDCB0 __REG(0x43100048) /* Data Controller Command Buffer0 */ |
| #define NDCB1 __REG(0x4310004C) /* Data Controller Command Buffer1 */ |
| #define NDCB2 __REG(0x43100050) /* Data Controller Command Buffer2 */ |
| |
| #define NDCR_SPARE_EN (0x1<<31) |
| #define NDCR_ECC_EN (0x1<<30) |
| #define NDCR_DMA_EN (0x1<<29) |
| #define NDCR_ND_RUN (0x1<<28) |
| #define NDCR_DWIDTH_C (0x1<<27) |
| #define NDCR_DWIDTH_M (0x1<<26) |
| #define NDCR_PAGE_SZ (0x3<<24) |
| #define NDCR_NCSX (0x1<<23) |
| #define NDCR_ND_STOP (0x1<<22) |
| /* reserved: |
| * #define NDCR_ND_MODE (0x3<<21) |
| * #define NDCR_NAND_MODE 0x0 */ |
| #define NDCR_CLR_PG_CNT (0x1<<20) |
| #define NDCR_CLR_ECC (0x1<<19) |
| #define NDCR_RD_ID_CNT (0x7<<16) |
| #define NDCR_RA_START (0x1<<15) |
| #define NDCR_PG_PER_BLK (0x1<<14) |
| #define NDCR_ND_ARB_EN (0x1<<12) |
| #define NDCR_RDYM (0x1<<11) |
| #define NDCR_CS0_PAGEDM (0x1<<10) |
| #define NDCR_CS1_PAGEDM (0x1<<9) |
| #define NDCR_CS0_CMDDM (0x1<<8) |
| #define NDCR_CS1_CMDDM (0x1<<7) |
| #define NDCR_CS0_BBDM (0x1<<6) |
| #define NDCR_CS1_BBDM (0x1<<5) |
| #define NDCR_DBERRM (0x1<<4) |
| #define NDCR_SBERRM (0x1<<3) |
| #define NDCR_WRDREQM (0x1<<2) |
| #define NDCR_RDDREQM (0x1<<1) |
| #define NDCR_WRCMDREQM (0x1) |
| |
| #define NDSR_RDY (0x1<<11) |
| #define NDSR_CS0_PAGED (0x1<<10) |
| #define NDSR_CS1_PAGED (0x1<<9) |
| #define NDSR_CS0_CMDD (0x1<<8) |
| #define NDSR_CS1_CMDD (0x1<<7) |
| #define NDSR_CS0_BBD (0x1<<6) |
| #define NDSR_CS1_BBD (0x1<<5) |
| #define NDSR_DBERR (0x1<<4) |
| #define NDSR_SBERR (0x1<<3) |
| #define NDSR_WRDREQ (0x1<<2) |
| #define NDSR_RDDREQ (0x1<<1) |
| #define NDSR_WRCMDREQ (0x1) |
| |
| #define NDCB0_AUTO_RS (0x1<<25) |
| #define NDCB0_CSEL (0x1<<24) |
| #define NDCB0_CMD_TYPE (0x7<<21) |
| #define NDCB0_NC (0x1<<20) |
| #define NDCB0_DBC (0x1<<19) |
| #define NDCB0_ADDR_CYC (0x7<<16) |
| #define NDCB0_CMD2 (0xff<<8) |
| #define NDCB0_CMD1 (0xff) |
| #define MCMEM(s) MCMEM0 |
| #define MCATT(s) MCATT0 |
| #define MCIO(s) MCIO0 |
| #define MECR_CIT (1 << 1)/* Card Is There: 0 -> no card, 1 -> card inserted */ |
| |
| /* Maximum values for NAND Interface Timing Registers in DFC clock |
| * periods */ |
| #define DFC_MAX_tCH 7 |
| #define DFC_MAX_tCS 7 |
| #define DFC_MAX_tWH 7 |
| #define DFC_MAX_tWP 7 |
| #define DFC_MAX_tRH 7 |
| #define DFC_MAX_tRP 15 |
| #define DFC_MAX_tR 65535 |
| #define DFC_MAX_tWHR 15 |
| #define DFC_MAX_tAR 15 |
| |
| #define DFC_CLOCK 104 /* DFC Clock is 104 MHz */ |
| #define DFC_CLK_PER_US DFC_CLOCK/1000 /* clock period in ns */ |
| |
| #else /* CONFIG_CPU_MONAHANS */ |
| |
| #define MEMC_BASE __REG(0x48000000) /* Base of Memory Controller */ |
| #define MDCNFG_OFFSET 0x0 |
| #define MDREFR_OFFSET 0x4 |
| #define MSC0_OFFSET 0x8 |
| #define MSC1_OFFSET 0xC |
| #define MSC2_OFFSET 0x10 |
| #define MECR_OFFSET 0x14 |
| #define SXLCR_OFFSET 0x18 |
| #define SXCNFG_OFFSET 0x1C |
| #define FLYCNFG_OFFSET 0x20 |
| #define SXMRS_OFFSET 0x24 |
| #define MCMEM0_OFFSET 0x28 |
| #define MCMEM1_OFFSET 0x2C |
| #define MCATT0_OFFSET 0x30 |
| #define MCATT1_OFFSET 0x34 |
| #define MCIO0_OFFSET 0x38 |
| #define MCIO1_OFFSET 0x3C |
| #define MDMRS_OFFSET 0x40 |
| |
| #define MDCNFG __REG(0x48000000) /* SDRAM Configuration Register 0 */ |
| #define MDCNFG_DE0 0x00000001 |
| #define MDCNFG_DE1 0x00000002 |
| #define MDCNFG_DE2 0x00010000 |
| #define MDCNFG_DE3 0x00020000 |
| #define MDCNFG_DWID0 0x00000004 |
| |
| #define MDREFR __REG(0x48000004) /* SDRAM Refresh Control Register */ |
| #define MSC0 __REG(0x48000008) /* Static Memory Control Register 0 */ |
| #define MSC1 __REG(0x4800000C) /* Static Memory Control Register 1 */ |
| #define MSC2 __REG(0x48000010) /* Static Memory Control Register 2 */ |
| #define MECR __REG(0x48000014) /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */ |
| #define SXLCR __REG(0x48000018) /* LCR value to be written to SDRAM-Timing Synchronous Flash */ |
| #define SXCNFG __REG(0x4800001C) /* Synchronous Static Memory Control Register */ |
| #define SXMRS __REG(0x48000024) /* MRS value to be written to Synchronous Flash or SMROM */ |
| #define MCMEM0 __REG(0x48000028) /* Card interface Common Memory Space Socket 0 Timing */ |
| #define MCMEM1 __REG(0x4800002C) /* Card interface Common Memory Space Socket 1 Timing */ |
| #define MCATT0 __REG(0x48000030) /* Card interface Attribute Space Socket 0 Timing Configuration */ |
| #define MCATT1 __REG(0x48000034) /* Card interface Attribute Space Socket 1 Timing Configuration */ |
| #define MCIO0 __REG(0x48000038) /* Card interface I/O Space Socket 0 Timing Configuration */ |
| #define MCIO1 __REG(0x4800003C) /* Card interface I/O Space Socket 1 Timing Configuration */ |
| #define MDMRS __REG(0x48000040) /* MRS value to be written to SDRAM */ |
| #define BOOT_DEF __REG(0x48000044) /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */ |
| |
| #define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */ |
| #define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */ |
| #define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */ |
| #define MDREFR_SLFRSH (1 << 22) /* SDRAM Self-Refresh Control/Status */ |
| #define MDREFR_APD (1 << 20) /* SDRAM/SSRAM Auto-Power-Down Enable */ |
| #define MDREFR_K2DB2 (1 << 19) /* SDCLK2 Divide by 2 Control/Status */ |
| #define MDREFR_K2RUN (1 << 18) /* SDCLK2 Run Control/Status */ |
| #define MDREFR_K1DB2 (1 << 17) /* SDCLK1 Divide by 2 Control/Status */ |
| #define MDREFR_K1RUN (1 << 16) /* SDCLK1 Run Control/Status */ |
| #define MDREFR_E1PIN (1 << 15) /* SDCKE1 Level Control/Status */ |
| #define MDREFR_K0DB2 (1 << 14) /* SDCLK0 Divide by 2 Control/Status */ |
| #define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */ |
| #define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */ |
| |
| #if defined(CONFIG_PXA27X) |
| |
| #define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */ |
| |
| #define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */ |
| #define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */ |
| #define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */ |
| #define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */ |
| #define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */ |
| #define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */ |
| #define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */ |
| #define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */ |
| #define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */ |
| |
| #endif /* CONFIG_CPU_MONAHANS */ |
| |
| /* Interrupt Controller */ |
| |
| #define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ |
| #define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ |
| #define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ |
| #define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ |
| #define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ |
| |
| /* General Purpose I/O */ |
| |
| #define GAFR3_L __REG(0x40E0006C) /* GPIO Alternate Function Select Register GPIO<111:96> */ |
| #define GAFR3_U __REG(0x40E00070) /* GPIO Alternate Function Select Register GPIO<127:112> */ |
| #define GPLR3 __REG(0x40E00100) /* GPIO Pin-Level Register GPIO<127:96> */ |
| #define GPDR3 __REG(0x40E0010C) /* GPIO Pin Direction Register GPIO<127:96> */ |
| #define GPSR3 __REG(0x40E00118) /* GPIO Pin Output Set Register GPIO<127:96> */ |
| #define GPCR3 __REG(0x40E00124) /* GPIO Pin Output Clear Register GPIO <127:96> */ |
| #define GRER3 __REG(0x40E00130) /* GPIO Rising-Edge Detect Register GPIO<127:96> */ |
| #define GFER3 __REG(0x40E0013C) /* GPIO Falling-Edge Detect Register GPIO<31:0> */ |
| #define GEDR3 __REG(0x40E00148) /* GPIO Edge Detect Status Register GPIO<127:96> */ |
| |
| /* Core Clock */ |
| |
| #define CCSR __REG(0x4130000C) /* Core Clock Status Register */ |
| |
| #define CKEN23_SSP1 (1 << 23) /* SSP1 Unit Clock Enable */ |
| #define CKEN22_MEMC (1 << 22) /* Memory Controler */ |
| #define CKEN21_MSHC (1 << 21) /* Memery Stick Host Controller */ |
| #define CKEN20_IM (1 << 20) /* Internal Memory Clock Enable */ |
| #define CKEN19_KEYPAD (1 << 19) /* Keypad Interface Clock Enable */ |
| #define CKEN18_USIM (1 << 18) /* USIM Unit Clock Enable */ |
| #define CKEN17_MSL (1 << 17) /* MSL Interface Unit Clock Enable */ |
| #define CKEN15_PWR_I2C (1 << 15) /* PWR_I2C Unit Clock Enable */ |
| #define CKEN9_OST (1 << 9) /* OS Timer Unit Clock Enable */ |
| #define CKEN4_SSP3 (1 << 4) /* SSP3 Unit Clock Enable */ |
| |
| /* Memory controller */ |
| |
| #define MDREFR_K0DB4 (1 << 29) /* SDCLK[0] divide by 4 */ |
| |
| /* LCD registers */ |
| #define LCCR4 __REG(0x44000010) /* LCD Controller Control Register 4 */ |
| #define LCCR5 __REG(0x44000014) /* LCD Controller Control Register 5 */ |
| #define FBR0 __REG(0x44000020) /* DMA Channel 0 Frame Branch Register */ |
| #define FBR1 __REG(0x44000024) /* DMA Channel 1 Frame Branch Register */ |
| #define FBR2 __REG(0x44000028) /* DMA Channel 2 Frame Branch Register */ |
| #define FBR3 __REG(0x4400002C) /* DMA Channel 3 Frame Branch Register */ |
| #define FBR4 __REG(0x44000030) /* DMA Channel 4 Frame Branch Register */ |
| #define FDADR2 __REG(0x44000220) /* DMA Channel 2 Frame Descriptor Address Register */ |
| #define FSADR2 __REG(0x44000224) /* DMA Channel 2 Frame Source Address Register */ |
| #define FIDR2 __REG(0x44000228) /* DMA Channel 2 Frame ID Register */ |
| #define LDCMD2 __REG(0x4400022C) /* DMA Channel 2 Command Register */ |
| #define FDADR3 __REG(0x44000230) /* DMA Channel 3 Frame Descriptor Address Register */ |
| #define FSADR3 __REG(0x44000234) /* DMA Channel 3 Frame Source Address Register */ |
| #define FIDR3 __REG(0x44000238) /* DMA Channel 3 Frame ID Register */ |
| #define LDCMD3 __REG(0x4400023C) /* DMA Channel 3 Command Register */ |
| #define FDADR4 __REG(0x44000240) /* DMA Channel 4 Frame Descriptor Address Register */ |
| #define FSADR4 __REG(0x44000244) /* DMA Channel 4 Frame Source Address Register */ |
| #define FIDR4 __REG(0x44000248) /* DMA Channel 4 Frame ID Register */ |
| #define LDCMD4 __REG(0x4400024C) /* DMA Channel 4 Command Register */ |
| #define FDADR5 __REG(0x44000250) /* DMA Channel 5 Frame Descriptor Address Register */ |
| #define FSADR5 __REG(0x44000254) /* DMA Channel 5 Frame Source Address Register */ |
| #define FIDR5 __REG(0x44000258) /* DMA Channel 5 Frame ID Register */ |
| #define LDCMD5 __REG(0x4400025C) /* DMA Channel 5 Command Register */ |
| |
| #define OVL1C1 __REG(0x44000050) /* Overlay 1 Control Register 1 */ |
| #define OVL1C2 __REG(0x44000060) /* Overlay 1 Control Register 2 */ |
| #define OVL2C1 __REG(0x44000070) /* Overlay 2 Control Register 1 */ |
| #define OVL2C2 __REG(0x44000080) /* Overlay 2 Control Register 2 */ |
| #define CCR __REG(0x44000090) /* Cursor Control Register */ |
| |
| #define FBR5 __REG(0x44000110) /* DMA Channel 5 Frame Branch Register */ |
| #define FBR6 __REG(0x44000114) /* DMA Channel 6 Frame Branch Register */ |
| |
| #define LCCR0_LDDALT (1<<26) /* LDD Alternate mapping bit when base pixel is RGBT16 */ |
| #define LCCR0_OUC (1<<25) /* Overlay Underlay Control Bit */ |
| |
| #define LCCR5_SOFM1 (1<<0) /* Start Of Frame Mask for Overlay 1 (channel 1) */ |
| #define LCCR5_SOFM2 (1<<1) /* Start Of Frame Mask for Overlay 2 (channel 2) */ |
| #define LCCR5_SOFM3 (1<<2) /* Start Of Frame Mask for Overlay 2 (channel 3) */ |
| #define LCCR5_SOFM4 (1<<3) /* Start Of Frame Mask for Overlay 2 (channel 4) */ |
| #define LCCR5_SOFM5 (1<<4) /* Start Of Frame Mask for cursor (channel 5) */ |
| #define LCCR5_SOFM6 (1<<5) /* Start Of Frame Mask for command data (channel 6) */ |
| |
| #define LCCR5_EOFM1 (1<<8) /* End Of Frame Mask for Overlay 1 (channel 1) */ |
| #define LCCR5_EOFM2 (1<<9) /* End Of Frame Mask for Overlay 2 (channel 2) */ |
| #define LCCR5_EOFM3 (1<<10) /* End Of Frame Mask for Overlay 2 (channel 3) */ |
| #define LCCR5_EOFM4 (1<<11) /* End Of Frame Mask for Overlay 2 (channel 4) */ |
| #define LCCR5_EOFM5 (1<<12) /* End Of Frame Mask for cursor (channel 5) */ |
| #define LCCR5_EOFM6 (1<<13) /* End Of Frame Mask for command data (channel 6) */ |
| |
| #define LCCR5_BSM1 (1<<16) /* Branch mask for Overlay 1 (channel 1) */ |
| #define LCCR5_BSM2 (1<<17) /* Branch mask for Overlay 2 (channel 2) */ |
| #define LCCR5_BSM3 (1<<18) /* Branch mask for Overlay 2 (channel 3) */ |
| #define LCCR5_BSM4 (1<<19) /* Branch mask for Overlay 2 (channel 4) */ |
| #define LCCR5_BSM5 (1<<20) /* Branch mask for cursor (channel 5) */ |
| #define LCCR5_BSM6 (1<<21) /* Branch mask for data command (channel 6) */ |
| |
| #define LCCR5_IUM1 (1<<24) /* Input FIFO Underrun Mask for Overlay 1 */ |
| #define LCCR5_IUM2 (1<<25) /* Input FIFO Underrun Mask for Overlay 2 */ |
| #define LCCR5_IUM3 (1<<26) /* Input FIFO Underrun Mask for Overlay 2 */ |
| #define LCCR5_IUM4 (1<<27) /* Input FIFO Underrun Mask for Overlay 2 */ |
| #define LCCR5_IUM5 (1<<28) /* Input FIFO Underrun Mask for cursor */ |
| #define LCCR5_IUM6 (1<<29) /* Input FIFO Underrun Mask for data command */ |
| |
| #define OVL1C1_O1EN (1<<31) /* Enable bit for Overlay 1 */ |
| #define OVL2C1_O2EN (1<<31) /* Enable bit for Overlay 2 */ |
| #define CCR_CEN (1<<31) /* Enable bit for Cursor */ |
| |
| /* Keypad controller */ |
| |
| #define KPC __REG(0x41500000) /* Keypad Interface Control register */ |
| #define KPDK __REG(0x41500008) /* Keypad Interface Direct Key register */ |
| #define KPREC __REG(0x41500010) /* Keypad Intefcace Rotary Encoder register */ |
| #define KPMK __REG(0x41500018) /* Keypad Intefcace Matrix Key register */ |
| #define KPAS __REG(0x41500020) /* Keypad Interface Automatic Scan register */ |
| #define KPASMKP0 __REG(0x41500028) /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */ |
| #define KPASMKP1 __REG(0x41500030) /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */ |
| #define KPASMKP2 __REG(0x41500038) /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */ |
| #define KPASMKP3 __REG(0x41500040) /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */ |
| #define KPKDI __REG(0x41500048) /* Keypad Interface Key Debounce Interval register */ |
| |
| #define KPC_AS (0x1 << 30) /* Automatic Scan bit */ |
| #define KPC_ASACT (0x1 << 29) /* Automatic Scan on Activity */ |
| #define KPC_MI (0x1 << 22) /* Matrix interrupt bit */ |
| #define KPC_IMKP (0x1 << 21) /* Ignore Multiple Key Press */ |
| #define KPC_MS7 (0x1 << 20) /* Matrix scan line 7 */ |
| #define KPC_MS6 (0x1 << 19) /* Matrix scan line 6 */ |
| #define KPC_MS5 (0x1 << 18) /* Matrix scan line 5 */ |
| #define KPC_MS4 (0x1 << 17) /* Matrix scan line 4 */ |
| #define KPC_MS3 (0x1 << 16) /* Matrix scan line 3 */ |
| #define KPC_MS2 (0x1 << 15) /* Matrix scan line 2 */ |
| #define KPC_MS1 (0x1 << 14) /* Matrix scan line 1 */ |
| #define KPC_MS0 (0x1 << 13) /* Matrix scan line 0 */ |
| #define KPC_ME (0x1 << 12) /* Matrix Keypad Enable */ |
| #define KPC_MIE (0x1 << 11) /* Matrix Interrupt Enable */ |
| #define KPC_DK_DEB_SEL (0x1 << 9) /* Direct Key Debounce select */ |
| #define KPC_DI (0x1 << 5) /* Direct key interrupt bit */ |
| #define KPC_DEE0 (0x1 << 2) /* Rotary Encoder 0 Enable */ |
| #define KPC_DE (0x1 << 1) /* Direct Keypad Enable */ |
| #define KPC_DIE (0x1 << 0) /* Direct Keypad interrupt Enable */ |
| |
| #define KPDK_DKP (0x1 << 31) |
| #define KPDK_DK7 (0x1 << 7) |
| #define KPDK_DK6 (0x1 << 6) |
| #define KPDK_DK5 (0x1 << 5) |
| #define KPDK_DK4 (0x1 << 4) |
| #define KPDK_DK3 (0x1 << 3) |
| #define KPDK_DK2 (0x1 << 2) |
| #define KPDK_DK1 (0x1 << 1) |
| #define KPDK_DK0 (0x1 << 0) |
| |
| #define KPREC_OF1 (0x1 << 31) |
| #define kPREC_UF1 (0x1 << 30) |
| #define KPREC_OF0 (0x1 << 15) |
| #define KPREC_UF0 (0x1 << 14) |
| |
| #define KPMK_MKP (0x1 << 31) |
| #define KPAS_SO (0x1 << 31) |
| #define KPASMKPx_SO (0x1 << 31) |
| |
| #define GPIO113_BIT (1 << 17)/* GPIO113 in GPSR, GPCR, bit 17 */ |
| #define PSLR __REG(0x40F00034) |
| #define PSTR __REG(0x40F00038) /* Power Manager Standby Configuration Reg */ |
| #define PSNR __REG(0x40F0003C) /* Power Manager Sense Configuration Reg */ |
| #define PVCR __REG(0x40F00040) /* Power Manager Voltage Change Control Reg */ |
| #define PKWR __REG(0x40F00050) /* Power Manager KB Wake-Up Enable Reg */ |
| #define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Status Reg */ |
| #define OSMR4 __REG(0x40A00080) /* */ |
| #define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */ |
| #define OMCR4 __REG(0x40A000C0) /* */ |
| |
| #endif /* CONFIG_PXA27X */ |
| |
| #endif /* _PXA_REGS_H_ */ |