| /* |
| * (C) Copyright 2003-2009 |
| * Heiko Schocher, DENX Software Engineering, hs@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| /* |
| * High Level Configuration Options |
| * (easy to change) |
| */ |
| |
| #define CONFIG_UC101 1 /* UC101 board */ |
| #define CONFIG_HOSTNAME uc101 |
| |
| #include "manroland/common.h" |
| #include "manroland/mpc5200-common.h" |
| |
| /* |
| * Serial console configuration |
| */ |
| #define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ |
| |
| /* |
| * BOOTP options |
| */ |
| #define CONFIG_BOOTP_BOOTFILESIZE |
| #define CONFIG_BOOTP_BOOTPATH |
| #define CONFIG_BOOTP_GATEWAY |
| #define CONFIG_BOOTP_HOSTNAME |
| |
| /* |
| * Flash configuration |
| */ |
| #define CONFIG_SYS_MAX_FLASH_SECT 140 |
| |
| /* |
| * Environment settings |
| */ |
| #define CONFIG_ENV_SECT_SIZE 0x10000 |
| |
| /* |
| * Memory map |
| */ |
| #define CONFIG_SYS_IB_MASTER 0xc0510000 /* CS 6 */ |
| #define CONFIG_SYS_IB_EPLD 0xc0500000 /* CS 7 */ |
| |
| /* SRAM */ |
| #define SRAM_BASE CONFIG_SYS_SRAM_BASE |
| #define SRAM_LEN 0x1fffff |
| #define SRAM_END (SRAM_BASE + SRAM_LEN) |
| |
| /* |
| * GPIO configuration |
| */ |
| #define CONFIG_SYS_GPS_PORT_CONFIG 0x4d558044 |
| |
| #define CONFIG_SYS_MEMTEST_START 0x00300000 |
| #define CONFIG_SYS_MEMTEST_END 0x00f00000 |
| |
| #define CONFIG_SYS_LOAD_ADDR 0x300000 |
| |
| #define CONFIG_SYS_BOOTCS_CFG 0x00045D00 |
| |
| /* 8Mbit SRAM @0x80100000 */ |
| #define CONFIG_SYS_CS1_SIZE 0x00200000 |
| #define CONFIG_SYS_CS1_CFG 0x21D00 |
| |
| /* Display H1, Status Inputs, EPLD @0x80600000 8 Bit */ |
| #define CONFIG_SYS_CS3_START CONFIG_SYS_DISPLAY_BASE |
| #define CONFIG_SYS_CS3_SIZE 0x00000100 |
| #define CONFIG_SYS_CS3_CFG 0x00081802 |
| |
| /* Interbus Master 16 Bit */ |
| #define CONFIG_SYS_CS6_START CONFIG_SYS_IB_MASTER |
| #define CONFIG_SYS_CS6_SIZE 0x00010000 |
| #define CONFIG_SYS_CS6_CFG 0x00FF3500 |
| |
| /* Interbus EPLD 8 Bit */ |
| #define CONFIG_SYS_CS7_START CONFIG_SYS_IB_EPLD |
| #define CONFIG_SYS_CS7_SIZE 0x00010000 |
| #define CONFIG_SYS_CS7_CFG 0x00081800 |
| |
| /*----------------------------------------------------------------------- |
| * IDE/ATA stuff Supports IDE harddisk |
| *----------------------------------------------------------------------- |
| */ |
| |
| #define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 2 drives per IDE bus*/ |
| |
| /*---------------------------------------------------------------------*/ |
| /* Display addresses */ |
| /*---------------------------------------------------------------------*/ |
| #define CONFIG_SYS_DISP_CHR_RAM (CONFIG_SYS_DISPLAY_BASE + 0x38) |
| #define CONFIG_SYS_DISP_CWORD (CONFIG_SYS_DISPLAY_BASE + 0x30) |
| |
| #endif /* __CONFIG_H */ |