include/configs/nitrogen6x.h - platform/external/u-boot - Gitiles

 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
  *
  * Configuration settings for the Boundary Devices Nitrogen6X
  * and Freescale i.MX6Q Sabre Lite boards.
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 #include "mx6_common.h"

 #define CONFIG_MACH_TYPE	3769

 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)

 #define CONFIG_MISC_INIT_R
 #define CONFIG_USBD_HS
 #define CONFIG_NETCONSOLE

 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE	       UART2_BASE

 #ifdef CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_BUS  0
 #define CONFIG_SF_DEFAULT_CS   0
 #define CONFIG_SF_DEFAULT_SPEED 25000000
 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
 #endif

 /* I2C Configs */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED		100000
 #define CONFIG_I2C_EDID

 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 #define CONFIG_SYS_FSL_USDHC_NUM       2

 /*
  * SATA Configs
  */
 #ifdef CONFIG_CMD_SATA
 #define CONFIG_SYS_SATA_MAX_DEVICE	1
 #define CONFIG_DWC_AHSATA_PORT_ID	0
 #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
 #define CONFIG_LBA48
 #endif

 #define CONFIG_FEC_MXC
 #define CONFIG_MII
 #define IMX_FEC_BASE			ENET_BASE_ADDR
 #define CONFIG_FEC_XCV_TYPE		RGMII
 #define CONFIG_ETHPRIME			"FEC"
 #define CONFIG_FEC_MXC_PHYADDR		6

 /* USB Configs */
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
 #define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS	0

 /* Framebuffer and LCD */
 #define CONFIG_VIDEO_IPUV3
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASH_SCREEN_ALIGN
 #define CONFIG_VIDEO_BMP_GZIP
 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (6 * 1024 * 1024)
 #define CONFIG_BMP_16BPP
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP

 #define CONFIG_PREBOOT                 ""

 #ifdef CONFIG_CMD_SATA
 #define CONFIG_DRIVE_SATA "sata "
 #else
 #define CONFIG_DRIVE_SATA
 #endif

 #ifdef CONFIG_CMD_MMC
 #define CONFIG_DRIVE_MMC "mmc "
 #else
 #define CONFIG_DRIVE_MMC
 #endif

 #ifdef CONFIG_USB_STORAGE
 #define CONFIG_DRIVE_USB "usb "
 #else
 #define CONFIG_DRIVE_USB
 #endif

 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB
 #define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC

 #if defined(CONFIG_SABRELITE)
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"script=boot.scr\0" \
 	"uimage=uImage\0" \
 	"console=ttymxc1\0" \
 	"fdt_high=0xffffffff\0" \
 	"initrd_high=0xffffffff\0" \
 	"fdt_file=imx6q-sabrelite.dtb\0" \
 	"fdt_addr=0x18000000\0" \
 	"boot_fdt=try\0" \
 	"ip_dyn=yes\0" \
 	"usb_pgood_delay=2000\0" \
 	"mmcdevs=0 1\0" \
 	"mmcpart=1\0" \
 	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
 		"root=${mmcroot}\0" \
 	"loadbootscript=" \
 		"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
 		"source\0" \
 	"loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
 	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if run loadfdt; then " \
 				"bootm ${loadaddr} - ${fdt_addr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
 					"bootm; " \
 				"else " \
 					"echo WARN: Cannot load the DT; " \
 				"fi; " \
 			"fi; " \
 		"else " \
 			"bootm; " \
 		"fi;\0" \
 	"netargs=setenv bootargs console=${console},${baudrate} " \
 		"root=/dev/nfs " \
 	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 		"netboot=echo Booting from net ...; " \
 		"run netargs; " \
 		"if test ${ip_dyn} = yes; then " \
 			"setenv get_cmd dhcp; " \
 		"else " \
 			"setenv get_cmd tftp; " \
 		"fi; " \
 		"${get_cmd} ${uimage}; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 				"bootm ${loadaddr} - ${fdt_addr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
 					"bootm; " \
 				"else " \
 					"echo WARN: Cannot load the DT; " \
 				"fi; " \
 			"fi; " \
 		"else " \
 			"bootm; " \
 		"fi;\0"

 #define CONFIG_BOOTCOMMAND \
 	"for mmcdev in ${mmcdevs}; do " \
 		"mmc dev ${mmcdev}; " \
 		"if mmc rescan; then " \
 			"if run loadbootscript; then " \
 				"run bootscript; " \
 			"else " \
 				"if run loaduimage; then " \
 					"run mmcboot; " \
 				"fi; " \
 			"fi; " \
 		"fi; " \
 	"done; " \
 	"run netboot; "
 #else
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"bootdevs=" CONFIG_DRIVE_TYPES "\0" \
 	"umsdevs=" CONFIG_UMSDEVS "\0" \
 	"usb_pgood_delay=2000\0" \
 	"console=ttymxc1\0" \
 	"clearenv=if sf probe || sf probe || sf probe 1 ; then " \
 		"sf erase 0xc0000 0x2000 && " \
 		"echo restored environment to factory default ; fi\0" \
 	"bootcmd=for dtype in ${bootdevs}" \
 		"; do " \
 			"if itest.s \"xusb\" == \"x${dtype}\" ; then " \
 				"usb start ;" \
 			"fi; " \
 			"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
 				"load " \
 					"${dtype} ${disk}:1 " \
 					"10008000 " \
 					"/6x_bootscript" \
 					"&& source 10008000 ; " \
 			"done ; " \
 		"done; " \
 		"setenv stdout serial,vga ; " \
 		"echo ; echo 6x_bootscript not found ; " \
 		"echo ; echo serial console at 115200, 8N1 ; echo ; " \
 		"echo details at http://boundarydevices.com/6q_bootscript ; " \
 		"setenv stdout serial;" \
 		"setenv stdin serial,usbkbd;" \
 		"for dtype in ${umsdevs} ; do " \
 			"if itest.s sata == ${dtype}; then " \
 				"initcmd='sata init' ;" \
 			"else " \
 				"initcmd='mmc rescan' ;" \
 			"fi; " \
 			"for disk in 0 1 ; do " \
 				"if $initcmd && $dtype dev $disk ; then " \
 					"setenv stdout serial,vga; " \
 					"echo expose ${dtype} ${disk} " \
 						"over USB; " \
 					"ums 0 $dtype $disk ;" \
 				"fi; " \
 		"	done; " \
 		"done ;" \
 		"setenv stdout serial,vga; " \
 		"echo no block devices found;" \
 		"\0" \
 	"initrd_high=0xffffffff\0" \
 	"upgradeu=for dtype in ${bootdevs}" \
 		"; do " \
 		"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
 			"load ${dtype} ${disk}:1 10008000 " \
 				"/6x_upgrade " \
 				"&& source 10008000 ; " \
 		"done ; " \
 	"done\0" \

 #endif
 /* Miscellaneous configurable options */
 #define CONFIG_SYS_MEMTEST_START       0x10000000
 #define CONFIG_SYS_MEMTEST_END	       0x10010000
 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS	       1
 #define PHYS_SDRAM		       MMDC0_ARB_BASE_ADDR

 #define CONFIG_SYS_SDRAM_BASE	       PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

 #define CONFIG_SYS_INIT_SP_OFFSET \
 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

 /* Environment organization */
 #define CONFIG_ENV_SIZE			(8 * 1024)

 #if defined(CONFIG_ENV_IS_IN_MMC)
 #define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
 #define CONFIG_SYS_MMC_ENV_DEV		0
 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 #define CONFIG_ENV_OFFSET		(768 * 1024)
 #define CONFIG_ENV_SECT_SIZE		(8 * 1024)
 #define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
 #define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
 #define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
 #define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
 #endif

 /*
  * PCI express
  */
 #ifdef CONFIG_CMD_PCI
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_PCIE_IMX
 #endif

 #endif	       /* __CONFIG_H */
	/* SPDX-License-Identifier: GPL-2.0+ */
	/*
	* Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
	*
	* Configuration settings for the Boundary Devices Nitrogen6X
	* and Freescale i.MX6Q Sabre Lite boards.
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	#include "mx6_common.h"

	#define CONFIG_MACH_TYPE 3769

	/* Size of malloc() pool */
	#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)

	#define CONFIG_MISC_INIT_R
	#define CONFIG_USBD_HS
	#define CONFIG_NETCONSOLE

	#define CONFIG_MXC_UART
	#define CONFIG_MXC_UART_BASE UART2_BASE

	#ifdef CONFIG_CMD_SF
	#define CONFIG_SF_DEFAULT_BUS 0
	#define CONFIG_SF_DEFAULT_CS 0
	#define CONFIG_SF_DEFAULT_SPEED 25000000
	#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
	#endif

	/* I2C Configs */
	#define CONFIG_SYS_I2C
	#define CONFIG_SYS_I2C_MXC
	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
	#define CONFIG_SYS_I2C_SPEED 100000
	#define CONFIG_I2C_EDID

	/* MMC Configs */
	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	#define CONFIG_SYS_FSL_USDHC_NUM 2

	/*
	* SATA Configs
	*/
	#ifdef CONFIG_CMD_SATA
	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	#define CONFIG_DWC_AHSATA_PORT_ID 0
	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	#define CONFIG_LBA48
	#endif

	#define CONFIG_FEC_MXC
	#define CONFIG_MII
	#define IMX_FEC_BASE ENET_BASE_ADDR
	#define CONFIG_FEC_XCV_TYPE RGMII
	#define CONFIG_ETHPRIME "FEC"
	#define CONFIG_FEC_MXC_PHYADDR 6

	/* USB Configs */
	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	#define CONFIG_MXC_USB_FLAGS 0

	/* Framebuffer and LCD */
	#define CONFIG_VIDEO_IPUV3
	#define CONFIG_VIDEO_BMP_RLE8
	#define CONFIG_SPLASH_SCREEN
	#define CONFIG_SPLASH_SCREEN_ALIGN
	#define CONFIG_VIDEO_BMP_GZIP
	#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (6 * 1024 * 1024)
	#define CONFIG_BMP_16BPP
	#define CONFIG_IMX_HDMI
	#define CONFIG_IMX_VIDEO_SKIP

	#define CONFIG_PREBOOT ""

	#ifdef CONFIG_CMD_SATA
	#define CONFIG_DRIVE_SATA "sata "
	#else
	#define CONFIG_DRIVE_SATA
	#endif

	#ifdef CONFIG_CMD_MMC
	#define CONFIG_DRIVE_MMC "mmc "
	#else
	#define CONFIG_DRIVE_MMC
	#endif

	#ifdef CONFIG_USB_STORAGE
	#define CONFIG_DRIVE_USB "usb "
	#else
	#define CONFIG_DRIVE_USB
	#endif

	#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB
	#define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC

	#if defined(CONFIG_SABRELITE)
	#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"uimage=uImage\0" \
	"console=ttymxc1\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"fdt_file=imx6q-sabrelite.dtb\0" \
	"fdt_addr=0x18000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"usb_pgood_delay=2000\0" \
	"mmcdevs=0 1\0" \
	"mmcpart=1\0" \
	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	"root=${mmcroot}\0" \
	"loadbootscript=" \
	"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
	"source\0" \
	"loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
	"run mmcargs; " \
	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	"if run loadfdt; then " \
	"bootm ${loadaddr} - ${fdt_addr}; " \
	"else " \
	"if test ${boot_fdt} = try; then " \
	"bootm; " \
	"else " \
	"echo WARN: Cannot load the DT; " \
	"fi; " \
	"fi; " \
	"else " \
	"bootm; " \
	"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
	"root=/dev/nfs " \
	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	"netboot=echo Booting from net ...; " \
	"run netargs; " \
	"if test ${ip_dyn} = yes; then " \
	"setenv get_cmd dhcp; " \
	"else " \
	"setenv get_cmd tftp; " \
	"fi; " \
	"${get_cmd} ${uimage}; " \
	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
	"bootm ${loadaddr} - ${fdt_addr}; " \
	"else " \
	"if test ${boot_fdt} = try; then " \
	"bootm; " \
	"else " \
	"echo WARN: Cannot load the DT; " \
	"fi; " \
	"fi; " \
	"else " \
	"bootm; " \
	"fi;\0"

	#define CONFIG_BOOTCOMMAND \
	"for mmcdev in ${mmcdevs}; do " \
	"mmc dev ${mmcdev}; " \
	"if mmc rescan; then " \
	"if run loadbootscript; then " \
	"run bootscript; " \
	"else " \
	"if run loaduimage; then " \
	"run mmcboot; " \
	"fi; " \
	"fi; " \
	"fi; " \
	"done; " \
	"run netboot; "
	#else
	#define CONFIG_EXTRA_ENV_SETTINGS \
	"bootdevs=" CONFIG_DRIVE_TYPES "\0" \
	"umsdevs=" CONFIG_UMSDEVS "\0" \
	"usb_pgood_delay=2000\0" \
	"console=ttymxc1\0" \
	"clearenv=if sf probe \|\| sf probe \|\| sf probe 1 ; then " \
	"sf erase 0xc0000 0x2000 && " \
	"echo restored environment to factory default ; fi\0" \
	"bootcmd=for dtype in ${bootdevs}" \
	"; do " \
	"if itest.s \"xusb\" == \"x${dtype}\" ; then " \
	"usb start ;" \
	"fi; " \
	"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
	"load " \
	"${dtype} ${disk}:1 " \
	"10008000 " \
	"/6x_bootscript" \
	"&& source 10008000 ; " \
	"done ; " \
	"done; " \
	"setenv stdout serial,vga ; " \
	"echo ; echo 6x_bootscript not found ; " \
	"echo ; echo serial console at 115200, 8N1 ; echo ; " \
	"echo details at http://boundarydevices.com/6q_bootscript ; " \
	"setenv stdout serial;" \
	"setenv stdin serial,usbkbd;" \
	"for dtype in ${umsdevs} ; do " \
	"if itest.s sata == ${dtype}; then " \
	"initcmd='sata init' ;" \
	"else " \
	"initcmd='mmc rescan' ;" \
	"fi; " \
	"for disk in 0 1 ; do " \
	"if $initcmd && $dtype dev $disk ; then " \
	"setenv stdout serial,vga; " \
	"echo expose ${dtype} ${disk} " \
	"over USB; " \
	"ums 0 $dtype $disk ;" \
	"fi; " \
	" done; " \
	"done ;" \
	"setenv stdout serial,vga; " \
	"echo no block devices found;" \
	"\0" \
	"initrd_high=0xffffffff\0" \
	"upgradeu=for dtype in ${bootdevs}" \
	"; do " \
	"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
	"load ${dtype} ${disk}:1 10008000 " \
	"/6x_upgrade " \
	"&& source 10008000 ; " \
	"done ; " \
	"done\0" \

	#endif
	/* Miscellaneous configurable options */
	#define CONFIG_SYS_MEMTEST_START 0x10000000
	#define CONFIG_SYS_MEMTEST_END 0x10010000
	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000

	/* Physical Memory Map */
	#define CONFIG_NR_DRAM_BANKS 1
	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR

	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE

	#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

	/* Environment organization */
	#define CONFIG_ENV_SIZE (8 * 1024)

	#if defined(CONFIG_ENV_IS_IN_MMC)
	#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
	#define CONFIG_SYS_MMC_ENV_DEV 0
	#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
	#define CONFIG_ENV_OFFSET (768 * 1024)
	#define CONFIG_ENV_SECT_SIZE (8 * 1024)
	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	#endif

	/*
	* PCI express
	*/
	#ifdef CONFIG_CMD_PCI
	#define CONFIG_PCI_SCAN_SHOW
	#define CONFIG_PCIE_IMX
	#endif

	#endif /* __CONFIG_H */