| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Video driver for Marvell Armada XP SoC |
| * |
| * Initialization of LCD interface and setup of SPLASH screen image |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <part.h> |
| #include <video.h> |
| #include <asm/cache.h> |
| #include <dm/device_compat.h> |
| #include <linux/delay.h> |
| #include <linux/mbus.h> |
| #include <asm/io.h> |
| #include <asm/arch/cpu.h> |
| #include <asm/arch/soc.h> |
| |
| #define MVEBU_LCD_WIN_CONTROL(w) (0xf000 + ((w) << 4)) |
| #define MVEBU_LCD_WIN_BASE(w) (0xf004 + ((w) << 4)) |
| #define MVEBU_LCD_WIN_REMAP(w) (0xf00c + ((w) << 4)) |
| |
| #define MVEBU_LCD_CFG_DMA_START_ADDR_0 0x00cc |
| #define MVEBU_LCD_CFG_DMA_START_ADDR_1 0x00dc |
| |
| #define MVEBU_LCD_CFG_GRA_START_ADDR0 0x00f4 |
| #define MVEBU_LCD_CFG_GRA_START_ADDR1 0x00f8 |
| #define MVEBU_LCD_CFG_GRA_PITCH 0x00fc |
| #define MVEBU_LCD_SPU_GRA_OVSA_HPXL_VLN 0x0100 |
| #define MVEBU_LCD_SPU_GRA_HPXL_VLN 0x0104 |
| #define MVEBU_LCD_SPU_GZM_HPXL_VLN 0x0108 |
| #define MVEBU_LCD_SPU_HWC_OVSA_HPXL_VLN 0x010c |
| #define MVEBU_LCD_SPU_HWC_HPXL_VLN 0x0110 |
| #define MVEBU_LCD_SPUT_V_H_TOTAL 0x0114 |
| #define MVEBU_LCD_SPU_V_H_ACTIVE 0x0118 |
| #define MVEBU_LCD_SPU_H_PORCH 0x011c |
| #define MVEBU_LCD_SPU_V_PORCH 0x0120 |
| #define MVEBU_LCD_SPU_BLANKCOLOR 0x0124 |
| #define MVEBU_LCD_SPU_ALPHA_COLOR1 0x0128 |
| #define MVEBU_LCD_SPU_ALPHA_COLOR2 0x012c |
| #define MVEBU_LCD_SPU_COLORKEY_Y 0x0130 |
| #define MVEBU_LCD_SPU_COLORKEY_U 0x0134 |
| #define MVEBU_LCD_SPU_COLORKEY_V 0x0138 |
| #define MVEBU_LCD_CFG_RDREG4F 0x013c |
| #define MVEBU_LCD_SPU_SPI_RXDATA 0x0140 |
| #define MVEBU_LCD_SPU_ISA_RXDATA 0x0144 |
| #define MVEBU_LCD_SPU_DBG_ISA 0x0148 |
| |
| #define MVEBU_LCD_SPU_HWC_RDDAT 0x0158 |
| #define MVEBU_LCD_SPU_GAMMA_RDDAT 0x015c |
| #define MVEBU_LCD_SPU_PALETTE_RDDAT 0x0160 |
| #define MVEBU_LCD_SPU_IOPAD_IN 0x0178 |
| #define MVEBU_LCD_FRAME_COUNT 0x017c |
| #define MVEBU_LCD_SPU_DMA_CTRL0 0x0190 |
| #define MVEBU_LCD_SPU_DMA_CTRL1 0x0194 |
| #define MVEBU_LCD_SPU_SRAM_CTRL 0x0198 |
| #define MVEBU_LCD_SPU_SRAM_WRDAT 0x019c |
| #define MVEBU_LCD_SPU_SRAM_PARA0 0x01a0 |
| #define MVEBU_LCD_SPU_SRAM_PARA1 0x01a4 |
| #define MVEBU_LCD_CFG_SCLK_DIV 0x01a8 |
| #define MVEBU_LCD_SPU_CONTRAST 0x01ac |
| #define MVEBU_LCD_SPU_SATURATION 0x01b0 |
| #define MVEBU_LCD_SPU_CBSH_HUE 0x01b4 |
| #define MVEBU_LCD_SPU_DUMB_CTRL 0x01b8 |
| #define MVEBU_LCD_SPU_IOPAD_CONTROL 0x01bc |
| #define MVEBU_LCD_SPU_IRQ_ENA_2 0x01d8 |
| #define MVEBU_LCD_SPU_IRQ_ISR_2 0x01dc |
| #define MVEBU_LCD_SPU_IRQ_ENA 0x01c0 |
| #define MVEBU_LCD_SPU_IRQ_ISR 0x01c4 |
| #define MVEBU_LCD_ADLL_CTRL 0x01c8 |
| #define MVEBU_LCD_CLK_DIS 0x01cc |
| #define MVEBU_LCD_VGA_HVSYNC_DELAY 0x01d4 |
| #define MVEBU_LCD_CLK_CFG_0 0xf0a0 |
| #define MVEBU_LCD_CLK_CFG_1 0xf0a4 |
| #define MVEBU_LCD_LVDS_CLK_CFG 0xf0ac |
| |
| #define MVEBU_LVDS_PADS_REG (MVEBU_SYSTEM_REG_BASE + 0xf0) |
| |
| enum { |
| /* Maximum LCD size we support */ |
| LCD_MAX_WIDTH = 640, |
| LCD_MAX_HEIGHT = 480, |
| LCD_MAX_LOG2_BPP = VIDEO_BPP16, |
| }; |
| |
| struct mvebu_lcd_info { |
| u32 fb_base; |
| int x_res; |
| int y_res; |
| int x_fp; |
| int y_fp; |
| int x_bp; |
| int y_bp; |
| }; |
| |
| struct mvebu_video_priv { |
| uintptr_t regs; |
| }; |
| |
| /* Setup Mbus Bridge Windows for LCD */ |
| static void mvebu_lcd_conf_mbus_registers(uintptr_t regs) |
| { |
| const struct mbus_dram_target_info *dram; |
| int i; |
| |
| dram = mvebu_mbus_dram_info(); |
| |
| /* Disable windows, set size/base/remap to 0 */ |
| for (i = 0; i < 6; i++) { |
| writel(0, regs + MVEBU_LCD_WIN_CONTROL(i)); |
| writel(0, regs + MVEBU_LCD_WIN_BASE(i)); |
| writel(0, regs + MVEBU_LCD_WIN_REMAP(i)); |
| } |
| |
| /* Write LCD bridge window registers */ |
| for (i = 0; i < dram->num_cs; i++) { |
| const struct mbus_dram_window *cs = dram->cs + i; |
| writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) | |
| (dram->mbus_dram_target_id << 4) | 1, |
| regs + MVEBU_LCD_WIN_CONTROL(i)); |
| |
| writel(cs->base & 0xffff0000, regs + MVEBU_LCD_WIN_BASE(i)); |
| } |
| } |
| |
| /* Initialize LCD registers */ |
| static void mvebu_lcd_register_init(struct mvebu_lcd_info *lcd_info, |
| uintptr_t regs) |
| { |
| /* Local variable for easier handling */ |
| int x = lcd_info->x_res; |
| int y = lcd_info->y_res; |
| u32 val; |
| |
| /* Setup Mbus Bridge Windows */ |
| mvebu_lcd_conf_mbus_registers(regs); |
| |
| /* |
| * Set LVDS Pads Control Register |
| * wr 0 182F0 FFE00000 |
| */ |
| clrbits_le32(MVEBU_LVDS_PADS_REG, 0x1f << 16); |
| |
| /* |
| * Set the LCD_CFG_GRA_START_ADDR0/1 Registers |
| * This is supposed to point to the "physical" memory at memory |
| * end (currently 1GB-64MB but also may be 2GB-64MB). |
| * See also the Window 0 settings! |
| */ |
| writel(lcd_info->fb_base, regs + MVEBU_LCD_CFG_GRA_START_ADDR0); |
| writel(lcd_info->fb_base, regs + MVEBU_LCD_CFG_GRA_START_ADDR1); |
| |
| /* |
| * Set the LCD_CFG_GRA_PITCH Register |
| * Bits 31-28: Duty Cycle of Backlight. value/16=High (0x8=Mid Setting) |
| * Bits 25-16: Backlight divider from 32kHz Clock |
| * (here 16=0x10 for 1kHz) |
| * Bits 15-00: Line Length in Bytes |
| * 240*2 (for RGB1555)=480=0x1E0 |
| */ |
| writel(0x80100000 + 2 * x, regs + MVEBU_LCD_CFG_GRA_PITCH); |
| |
| /* |
| * Set the LCD_SPU_GRA_OVSA_HPXL_VLN Register |
| * Bits 31-16: Vertical start of graphical overlay on screen |
| * Bits 15-00: Horizontal start of graphical overlay on screen |
| */ |
| writel(0x00000000, regs + MVEBU_LCD_SPU_GRA_OVSA_HPXL_VLN); |
| |
| /* |
| * Set the LCD_SPU_GRA_HPXL_VLN Register |
| * Bits 31-16: Vertical size of graphical overlay 320=0x140 |
| * Bits 15-00: Horizontal size of graphical overlay 240=0xF0 |
| * Values before zooming |
| */ |
| writel((y << 16) | x, regs + MVEBU_LCD_SPU_GRA_HPXL_VLN); |
| |
| /* |
| * Set the LCD_SPU_GZM_HPXL_VLN Register |
| * Bits 31-16: Vertical size of graphical overlay 320=0x140 |
| * Bits 15-00: Horizontal size of graphical overlay 240=0xF0 |
| * Values after zooming |
| */ |
| writel((y << 16) | x, regs + MVEBU_LCD_SPU_GZM_HPXL_VLN); |
| |
| /* |
| * Set the LCD_SPU_HWC_OVSA_HPXL_VLN Register |
| * Bits 31-16: Vertical position of HW Cursor 320=0x140 |
| * Bits 15-00: Horizontal position of HW Cursor 240=0xF0 |
| */ |
| writel((y << 16) | x, regs + MVEBU_LCD_SPU_HWC_OVSA_HPXL_VLN); |
| |
| /* |
| * Set the LCD_SPU_HWC_OVSA_HPXL_VLN Register |
| * Bits 31-16: Vertical size of HW Cursor |
| * Bits 15-00: Horizontal size of HW Cursor |
| */ |
| writel(0x00000000, regs + MVEBU_LCD_SPU_HWC_HPXL_VLN); |
| |
| /* |
| * Set the LCD_SPU_HWC_OVSA_HPXL_VLN Register |
| * Bits 31-16: Screen total vertical lines: |
| * VSYNC = 1 |
| * Vertical Front Porch = 2 |
| * Vertical Lines = 320 |
| * Vertical Back Porch = 2 |
| * SUM = 325 = 0x0145 |
| * Bits 15-00: Screen total horizontal pixels: |
| * HSYNC = 1 |
| * Horizontal Front Porch = 44 |
| * Horizontal Lines = 240 |
| * Horizontal Back Porch = 2 |
| * SUM = 287 = 0x011F |
| * Note: For the display the backporch is between SYNC and |
| * the start of the pixels. |
| * This is not certain for the Marvell (!?) |
| */ |
| val = ((y + lcd_info->y_fp + lcd_info->y_bp + 1) << 16) | |
| (x + lcd_info->x_fp + lcd_info->x_bp + 1); |
| writel(val, regs + MVEBU_LCD_SPUT_V_H_TOTAL); |
| |
| /* |
| * Set the LCD_SPU_V_H_ACTIVE Register |
| * Bits 31-16: Screen active vertical lines 320=0x140 |
| * Bits 15-00: Screen active horizontakl pixels 240=0x00F0 |
| */ |
| writel((y << 16) | x, regs + MVEBU_LCD_SPU_V_H_ACTIVE); |
| |
| /* |
| * Set the LCD_SPU_H_PORCH Register |
| * Bits 31-16: Screen horizontal backporch 44=0x2c |
| * Bits 15-00: Screen horizontal frontporch 2=0x02 |
| * Note: The terms "front" and "back" for the Marvell seem to be |
| * exactly opposite to the display. |
| */ |
| writel((lcd_info->x_fp << 16) | lcd_info->x_bp, |
| regs + MVEBU_LCD_SPU_H_PORCH); |
| |
| /* |
| * Set the LCD_SPU_V_PORCH Register |
| * Bits 31-16: Screen vertical backporch 2=0x02 |
| * Bits 15-00: Screen vertical frontporch 2=0x02 |
| * Note: The terms "front" and "back" for the Marvell seem to be exactly |
| * opposite to the display. |
| */ |
| writel((lcd_info->y_fp << 16) | lcd_info->y_bp, |
| regs + MVEBU_LCD_SPU_V_PORCH); |
| |
| /* |
| * Set the LCD_SPU_BLANKCOLOR Register |
| * This should be black = 0 |
| * For tests this is magenta=00FF00FF |
| */ |
| writel(0x00FF00FF, regs + MVEBU_LCD_SPU_BLANKCOLOR); |
| |
| /* |
| * Registers in the range of 0x0128 to 0x012C are colors for the cursor |
| * Registers in the range of 0x0130 to 0x0138 are colors for video |
| * color keying |
| */ |
| |
| /* |
| * Set the LCD_SPU_RDREG4F Register |
| * Bits 31-12: Reservd |
| * Bit 11: SRAM Wait |
| * Bit 10: Smart display fast TX (must be 1) |
| * Bit 9: DMA Arbitration Video/Graphics overlay: 0=interleaved |
| * Bit 8: FIFO watermark for DMA: 0=disable |
| * Bits 07-00: Empty 8B FIFO entries to trigger DMA, default=0x80 |
| */ |
| writel(0x00000780, regs + MVEBU_LCD_CFG_RDREG4F); |
| |
| /* |
| * Set the LCD_SPU_DMACTRL 0 Register |
| * Bit 31: Disable overlay blending 1=disable |
| * Bit 30: Gamma correction enable, 0=disable |
| * Bit 29: Video Contrast/Saturation/Hue Adjust enable, 0=disable |
| * Bit 28: Color palette enable, 0=disable |
| * Bit 27: DMA AXI Arbiter, 1=default |
| * Bit 26: HW Cursor 1-bit mode |
| * Bit 25: HW Cursor or 1- or 2-bit mode |
| * Bit 24: HW Cursor enabled, 0=disable |
| * Bits 23-20: Graphics Memory Color Format: 0x1=RGB1555 |
| * Bits 19-16: Video Memory Color Format: 0x1=RGB1555 |
| * Bit 15: Memory Toggle between frame 0 and 1: 0=disable |
| * Bit 14: Graphics horizontal scaling enable: 0=disable |
| * Bit 13: Graphics test mode: 0=disable |
| * Bit 12: Graphics SWAP R and B: 0=disable |
| * Bit 11: Graphics SWAP U and V: 0=disable |
| * Bit 10: Graphics SWAP Y and U/V: 0=disable |
| * Bit 09: Graphic YUV to RGB Conversion: 0=disable |
| * Bit 08: Graphic Transfer: 1=enable |
| * Bit 07: Memory Toggle: 0=disable |
| * Bit 06: Video horizontal scaling enable: 0=disable |
| * Bit 05: Video test mode: 0=disable |
| * Bit 04: Video SWAP R and B: 0=disable |
| * Bit 03: Video SWAP U and V: 0=disable |
| * Bit 02: Video SWAP Y and U/V: 0=disable |
| * Bit 01: Video YUV to RGB Conversion: 0=disable |
| * Bit 00: Video Transfer: 0=disable |
| */ |
| writel(0x88111100, regs + MVEBU_LCD_SPU_DMA_CTRL0); |
| |
| /* |
| * Set the LCD_SPU_DMA_CTRL1 Register |
| * Bit 31: Manual DMA Trigger = 0 |
| * Bits 30-28: DMA Trigger Source: 0x2 VSYNC |
| * Bit 28: VSYNC_INV: 0=Rising Edge, 1=Falling Edge |
| * Bits 26-24: Color Key Mode: 0=disable |
| * Bit 23: Fill low bits: 0=fill with zeroes |
| * Bit 22: Reserved |
| * Bit 21: Gated Clock: 0=disable |
| * Bit 20: Power Save enable: 0=disable |
| * Bits 19-18: Reserved |
| * Bits 17-16: Configure Video/Graphic Path: 0x1: Graphic path alpha. |
| * Bits 15-08: Configure Alpha: 0x00. |
| * Bits 07-00: Reserved. |
| */ |
| writel(0x20010000, regs + MVEBU_LCD_SPU_DMA_CTRL1); |
| |
| /* |
| * Set the LCD_SPU_SRAM_CTRL Register |
| * Reset to default = 0000C000 |
| * Bits 15-14: SRAM control: init=0x3, Read=0, Write=2 |
| * Bits 11-08: SRAM address ID: 0=gamma_yr, 1=gammy_ug, 2=gamma_vb, |
| * 3=palette, 15=cursor |
| */ |
| writel(0x0000C000, regs + MVEBU_LCD_SPU_SRAM_CTRL); |
| |
| /* |
| * LCD_SPU_SRAM_WRDAT register: 019C |
| * LCD_SPU_SRAM_PARA0 register: 01A0 |
| * LCD_SPU_SRAM_PARA1 register: 01A4 - Cursor control/Power settings |
| */ |
| writel(0x00000000, regs + MVEBU_LCD_SPU_SRAM_PARA1); |
| |
| |
| /* Clock settings in the at 01A8 and in the range F0A0 see below */ |
| |
| /* |
| * Set LCD_SPU_CONTRAST |
| * Bits 31-16: Brightness sign ext. 8-bit value +255 to -255: default=0 |
| * Bits 15-00: Contrast sign ext. 8-bit value +255 to -255: default=0 |
| */ |
| writel(0x00000000, regs + MVEBU_LCD_SPU_CONTRAST); |
| |
| /* |
| * Set LCD_SPU_SATURATION |
| * Bits 31-16: Multiplier signed 4.12 fixed point value |
| * Bits 15-00: Saturation signed 4.12 fixed point value |
| */ |
| writel(0x10001000, regs + MVEBU_LCD_SPU_SATURATION); |
| |
| /* |
| * Set LCD_SPU_HUE |
| * Bits 31-16: Sine signed 2.14 fixed point value |
| * Bits 15-00: Cosine signed 2.14 fixed point value |
| */ |
| writel(0x00000000, regs + MVEBU_LCD_SPU_CBSH_HUE); |
| |
| /* |
| * Set LCD_SPU_DUMB_CTRL |
| * Bits 31-28: LCD Type: 3=18 bit RGB | 6=24 bit RGB888 |
| * Bits 27-12: Reserved |
| * Bit 11: LCD DMA Pipeline Enable: 1=Enable |
| * Bits 10-09: Reserved |
| * Bit 8: LCD GPIO pin (??) |
| * Bit 7: Reverse RGB |
| * Bit 6: Invert composite blank signal DE/EN (??) |
| * Bit 5: Invert composite sync signal |
| * Bit 4: Invert Pixel Valid Enable DE/EN (??) |
| * Bit 3: Invert VSYNC |
| * Bit 2: Invert HSYNC |
| * Bit 1: Invert Pixel Clock |
| * Bit 0: Enable LCD Panel: 1=Enable |
| * Question: Do we have to disable Smart and Dumb LCD |
| * and separately enable LVDS? |
| */ |
| writel(0x6000080F, regs + MVEBU_LCD_SPU_DUMB_CTRL); |
| |
| /* |
| * Set LCD_SPU_IOPAD_CTRL |
| * Bits 31-20: Reserved |
| * Bits 19-18: Vertical Interpolation: 0=Disable |
| * Bits 17-16: Reserved |
| * Bit 15: Graphics Vertical Mirror enable: 0=disable |
| * Bit 14: Reserved |
| * Bit 13: Video Vertical Mirror enable: 0=disable |
| * Bit 12: Reserved |
| * Bit 11: Command Vertical Mirror enable: 0=disable |
| * Bit 10: Reserved |
| * Bits 09-08: YUV to RGB Color space conversion: 0 (Not used) |
| * Bits 07-04: AXI Bus Master: 0x4: no crossing of 4k boundary, |
| * 128 Bytes burst |
| * Bits 03-00: LCD pins: ??? 0=24-bit Dump panel ?? |
| */ |
| writel(0x000000C0, regs + MVEBU_LCD_SPU_IOPAD_CONTROL); |
| |
| /* |
| * Set SUP_IRQ_ENA_2: Disable all interrupts |
| */ |
| writel(0x00000000, regs + MVEBU_LCD_SPU_IRQ_ENA_2); |
| |
| /* |
| * Set SUP_IRQ_ENA: Disable all interrupts. |
| */ |
| writel(0x00000000, regs + MVEBU_LCD_SPU_IRQ_ENA); |
| |
| /* |
| * Set up ADDL Control Register |
| * Bits 31-29: 0x0 = Fastest Delay Line (default) |
| * 0x3 = Slowest Delay Line (default) |
| * Bit 28: Calibration done status. |
| * Bit 27: Reserved |
| * Bit 26: Set Pixel Clock to ADDL output |
| * Bit 25: Reduce CAL Enable |
| * Bits 24-22: Manual calibration value. |
| * Bit 21: Manual calibration enable. |
| * Bit 20: Restart Auto Cal |
| * Bits 19-16: Calibration Threshold voltage, default= 0x2 |
| * Bite 15-14: Reserved |
| * Bits 13-11: Divisor for ADDL Clock: 0x1=/2, 0x3=/8, 0x5=/16 |
| * Bit 10: Power Down ADDL module, default = 1! |
| * Bits 09-08: Test point configuration: 0x2=Bias, 0x3=High-z |
| * Bit 07: Reset ADDL |
| * Bit 06: Invert ADLL Clock |
| * Bits 05-00: Delay taps, 0x3F=Half Cycle, 0x00=No delay |
| * Note: ADLL is used for a VGA interface with DAC - not used here |
| */ |
| writel(0x00000000, regs + MVEBU_LCD_ADLL_CTRL); |
| |
| /* |
| * Set the LCD_CLK_DIS Register: |
| * Bits 3 and 4 must be 1 |
| */ |
| writel(0x00000018, regs + MVEBU_LCD_CLK_DIS); |
| |
| /* |
| * Set the LCD_VGA_HSYNC/VSYNC Delay Register: |
| * Bits 03-00: Sets the delay for the HSYNC and VSYNC signals |
| */ |
| writel(0x00000000, regs + MVEBU_LCD_VGA_HVSYNC_DELAY); |
| |
| /* |
| * Clock registers |
| * See page 475 in the functional spec. |
| */ |
| |
| /* Step 1 and 2: Disable the PLL */ |
| |
| /* |
| * Disable PLL, see "LCD Clock Configuration 1 Register" below |
| */ |
| writel(0x8FF40007, regs + MVEBU_LCD_CLK_CFG_1); |
| |
| /* |
| * Powerdown, see "LCD Clock Configuration 0 Register" below |
| */ |
| writel(0x94000174, regs + MVEBU_LCD_CLK_CFG_0); |
| |
| /* |
| * Set the LCD_CFG_SCLK_DIV Register |
| * This is set fix to 0x40000001 for the LVDS output: |
| * Bits 31-30: SCLCK Source: 0=AXIBus, 1=AHBus, 2=PLLDivider0 |
| * Bits 15-01: Clock Divider: Bypass for LVDS=0x0001 |
| * See page 475 in section 28.5. |
| */ |
| writel(0x80000001, regs + MVEBU_LCD_CFG_SCLK_DIV); |
| |
| /* |
| * Set the LCD Clock Configuration 0 Register: |
| * Bit 31: Powerdown: 0=Power up |
| * Bits 30-29: Reserved |
| * Bits 28-26: PLL_KDIV: This encodes K |
| * K=16 => 0x5 |
| * Bits 25-17: PLL_MDIV: This is M-1: |
| * M=1 => 0x0 |
| * Bits 16-13: VCO band: 0x1 for 700-920MHz |
| * Bits 12-04: PLL_NDIV: This is N-1 and corresponds to R1_CTRL! |
| * N=28=0x1C => 0x1B |
| * Bits 03-00: R1_CTRL (for N=28 => 0x4) |
| */ |
| writel(0x940021B4, regs + MVEBU_LCD_CLK_CFG_0); |
| |
| /* |
| * Set the LCD Clock Configuration 1 Register: |
| * Bits 31-19: Reserved |
| * Bit 18: Select PLL: Core PLL, 1=Dedicated PPL |
| * Bit 17: Clock Output Enable: 0=disable, 1=enable |
| * Bit 16: Select RefClk: 0=RefClk (25MHz), 1=External |
| * Bit 15: Half-Div, Device Clock by DIV+0.5*Half-Dev |
| * Bits 14-13: Reserved |
| * Bits 12-00: PLL Full Divider [Note: Assumed to be the Post-Divider |
| * M' for LVDS=7!] |
| */ |
| writel(0x8FF40007, regs + MVEBU_LCD_CLK_CFG_1); |
| |
| /* |
| * Set the LVDS Clock Configuration Register: |
| * Bit 31: Clock Gating for the input clock to the LVDS |
| * Bit 30: LVDS Serializer enable: 1=Enabled |
| * Bits 29-11: Reserved |
| * Bit 11-08: LVDS Clock delay: 0x02 (default): by 2 pixel clock/7 |
| * Bits 07-02: Reserved |
| * Bit 01: 24bbp Option: 0=Option_1,1=Option2 |
| * Bit 00: 1=24bbp Panel: 0=18bpp Panel |
| * Note: Bits 0 and must be verified with the help of the |
| * Interface/display |
| */ |
| writel(0xC0000201, regs + MVEBU_LCD_LVDS_CLK_CFG); |
| |
| /* |
| * Power up PLL (Clock Config 0) |
| */ |
| writel(0x140021B4, regs + MVEBU_LCD_CLK_CFG_0); |
| |
| /* wait 10 ms */ |
| mdelay(10); |
| |
| /* |
| * Enable PLL (Clock Config 1) |
| */ |
| writel(0x8FF60007, regs + MVEBU_LCD_CLK_CFG_1); |
| } |
| |
| static int mvebu_video_probe(struct udevice *dev) |
| { |
| struct video_uc_platdata *plat = dev_get_uclass_plat(dev); |
| struct video_priv *uc_priv = dev_get_uclass_priv(dev); |
| struct mvebu_video_priv *priv = dev_get_priv(dev); |
| struct mvebu_lcd_info lcd_info; |
| struct display_timing timings; |
| u32 fb_start, fb_end; |
| int ret; |
| |
| priv->regs = dev_read_addr(dev); |
| if (priv->regs == FDT_ADDR_T_NONE) { |
| dev_err(dev, "failed to get LCD address\n"); |
| return -ENXIO; |
| } |
| |
| ret = ofnode_decode_display_timing(dev_ofnode(dev), 0, &timings); |
| if (ret) { |
| dev_err(dev, "failed to get any display timings\n"); |
| return -EINVAL; |
| } |
| |
| /* Use DT timing (resolution) in internal info struct */ |
| lcd_info.fb_base = plat->base; |
| lcd_info.x_res = timings.hactive.typ; |
| lcd_info.x_fp = timings.hfront_porch.typ; |
| lcd_info.x_bp = timings.hback_porch.typ; |
| lcd_info.y_res = timings.vactive.typ; |
| lcd_info.y_fp = timings.vfront_porch.typ; |
| lcd_info.y_bp = timings.vback_porch.typ; |
| |
| /* Initialize the LCD controller */ |
| mvebu_lcd_register_init(&lcd_info, priv->regs); |
| |
| /* Enable dcache for the frame buffer */ |
| fb_start = plat->base & ~(MMU_SECTION_SIZE - 1); |
| fb_end = plat->base + plat->size; |
| fb_end = ALIGN(fb_end, 1 << MMU_SECTION_SHIFT); |
| mmu_set_region_dcache_behaviour(fb_start, fb_end - fb_start, |
| DCACHE_WRITEBACK); |
| video_set_flush_dcache(dev, true); |
| |
| uc_priv->xsize = lcd_info.x_res; |
| uc_priv->ysize = lcd_info.y_res; |
| uc_priv->bpix = VIDEO_BPP16; /* Uses RGB555 format */ |
| |
| return 0; |
| } |
| |
| static int mvebu_video_bind(struct udevice *dev) |
| { |
| struct video_uc_platdata *plat = dev_get_uclass_plat(dev); |
| |
| plat->size = LCD_MAX_WIDTH * LCD_MAX_HEIGHT * |
| (1 << LCD_MAX_LOG2_BPP) / 8; |
| |
| return 0; |
| } |
| |
| static const struct udevice_id mvebu_video_ids[] = { |
| { .compatible = "marvell,armada-xp-lcd" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(mvebu_video) = { |
| .name = "mvebu_video", |
| .id = UCLASS_VIDEO, |
| .of_match = mvebu_video_ids, |
| .bind = mvebu_video_bind, |
| .probe = mvebu_video_probe, |
| .priv_auto = sizeof(struct mvebu_video_priv), |
| }; |