| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2010-2020 CS Group |
| * Charles Frey <charles.frey@c-s.fr> |
| * Florent Trinh Thai <florent.trinh-thai@c-s.fr> |
| * Christophe Leroy <christophe.leroy@c-s.fr> |
| * |
| * Common specific routines for the CS Group boards |
| */ |
| |
| #include <dm.h> |
| #include <env.h> |
| #include <fdt_support.h> |
| #include <hang.h> |
| #include <spi.h> |
| #include <linux/delay.h> |
| #include <asm/io.h> |
| |
| #include "common.h" |
| |
| #define ADDR_FPGA_R_BASE ((unsigned char __iomem *)CONFIG_FPGA_BASE) |
| |
| #define FPGA_R_ACQ_AL_FAV 0x04 |
| |
| #define TYPE_MCR 0x22 |
| #define TYPE_MIAE 0x23 |
| |
| #define FAR_CASRSA 2 |
| #define FAR_VGOIP 4 |
| #define FAV_CLA 7 |
| #define FAV_SRSA 8 |
| |
| #define SPI_EEPROM_READ 0x03 |
| |
| static int fdt_set_node_and_value(void *blob, char *node, const char *prop, |
| void *var, int size) |
| { |
| int ret, off; |
| |
| off = fdt_path_offset(blob, node); |
| |
| if (off < 0) { |
| printf("Cannot find %s node err:%s\n", node, fdt_strerror(off)); |
| |
| return off; |
| } |
| |
| ret = fdt_setprop(blob, off, prop, var, size); |
| |
| if (ret < 0) |
| printf("Cannot set %s/%s prop err: %s\n", node, prop, fdt_strerror(ret)); |
| |
| return ret; |
| } |
| |
| /* Checks front/rear id and remove unneeded nodes from the blob */ |
| static void ft_cleanup(void *blob, unsigned long id, const char *prop, const char *compatible) |
| { |
| int off; |
| |
| off = fdt_node_offset_by_compatible(blob, -1, compatible); |
| |
| while (off != -FDT_ERR_NOTFOUND) { |
| const struct fdt_property *ids; |
| int nb_ids, idx; |
| int tmp = -1; |
| |
| ids = fdt_get_property(blob, off, prop, &nb_ids); |
| |
| for (idx = 0; idx < nb_ids; idx += 4) { |
| if (*((uint32_t *)&ids->data[idx]) == id) |
| break; |
| } |
| |
| if (idx >= nb_ids) |
| fdt_del_node(blob, off); |
| else |
| tmp = off; |
| |
| off = fdt_node_offset_by_compatible(blob, tmp, compatible); |
| } |
| |
| fdt_set_node_and_value(blob, "/", prop, &id, sizeof(uint32_t)); |
| } |
| |
| int read_eeprom(u8 *din, int len) |
| { |
| struct udevice *eeprom; |
| struct spi_slave *slave; |
| uchar dout[3] = {SPI_EEPROM_READ, 0, 0}; |
| int ret; |
| |
| ret = uclass_get_device(UCLASS_SPI, 0, &eeprom); |
| if (ret) |
| return ret; |
| |
| ret = _spi_get_bus_and_cs(0, 0, 1000000, 0, "spi_generic_drv", |
| "generic_0:0", &eeprom, &slave); |
| if (ret) |
| return ret; |
| |
| ret = spi_claim_bus(slave); |
| |
| ret = spi_xfer(slave, sizeof(dout) << 3, dout, NULL, SPI_XFER_BEGIN); |
| if (ret) |
| return ret; |
| |
| ret = spi_xfer(slave, len << 3, NULL, din, SPI_XFER_END); |
| if (ret) |
| return ret; |
| |
| spi_release_bus(slave); |
| |
| return 0; |
| } |
| |
| int ft_board_setup_common(void *blob) |
| { |
| u8 far_id, fav_id; |
| |
| if (in_8(ADDR_FPGA_R_BASE) != TYPE_MIAE) |
| return 0; |
| |
| far_id = in_8(ADDR_FPGA_R_BASE + 0x43) >> 5; |
| ft_cleanup(blob, far_id, "far-id", "cs,mia-far"); |
| |
| fav_id = in_8(ADDR_FPGA_R_BASE + 0x44) >> 5; |
| |
| if (far_id == FAR_CASRSA && fav_id == FAV_CLA) |
| fav_id = FAV_SRSA; |
| |
| ft_cleanup(blob, fav_id, "fav-id", "cs,mia-fav"); |
| |
| if (far_id == FAR_CASRSA) |
| ft_board_setup_phy3(); |
| |
| return 0; |
| } |
| |
| int checkboard_common(void) |
| { |
| switch (in_8(ADDR_FPGA_R_BASE)) { |
| int far_id; |
| case TYPE_MCR: |
| printf("MCR3000_2G (CS GROUP)\n"); |
| break; |
| case TYPE_MIAE: |
| far_id = in_8(ADDR_FPGA_R_BASE + 0x43) >> 5; |
| |
| if (far_id == FAR_VGOIP) |
| printf("VGoIP (CS GROUP)\n"); |
| else |
| printf("MIAE (CS GROUP)\n"); |
| |
| break; |
| default: |
| printf("Unknown\n"); |
| for (;;) |
| ; |
| break; |
| } |
| return 0; |
| } |
| |
| void misc_init_r_common(void) |
| { |
| u8 tmp, far_id; |
| int count = 3; |
| |
| switch (in_8(ADDR_FPGA_R_BASE)) { |
| case TYPE_MCR: |
| /* if at boot alarm button is pressed, delay boot */ |
| if ((in_8(ADDR_FPGA_R_BASE + 0x31) & FPGA_R_ACQ_AL_FAV) == 0) |
| env_set("bootdelay", "60"); |
| |
| env_set("config", CFG_BOARD_MCR3000_2G); |
| env_set("hostname", CFG_BOARD_MCR3000_2G); |
| break; |
| |
| case TYPE_MIAE: |
| do { |
| tmp = in_8(ADDR_FPGA_R_BASE + 0x41); |
| count--; |
| mdelay(10); /* 10msec wait */ |
| } while (count && tmp != in_8(ADDR_FPGA_R_BASE + 0x41)); |
| |
| if (!count) { |
| printf("Cannot read the reset factory switch position\n"); |
| hang(); |
| } |
| |
| if (tmp & 0x1) |
| env_set_default("Factory settings switch ON", 0); |
| |
| env_set("config", CFG_BOARD_MIAE); |
| far_id = in_8(ADDR_FPGA_R_BASE + 0x43) >> 5; |
| |
| if (far_id == FAR_VGOIP) |
| env_set("hostname", CFG_BOARD_VGOIP); |
| else |
| env_set("hostname", CFG_BOARD_MIAE); |
| break; |
| |
| default: |
| env_set("config", CFG_BOARD_CMPCXXX); |
| env_set("hostname", CFG_BOARD_CMPCXXX); |
| break; |
| } |
| } |
| |
| void iop_setup_common(void) |
| { |
| u8 type = in_8(ADDR_FPGA_R_BASE); |
| |
| if (type == TYPE_MCR) |
| iop_setup_mcr(); |
| else if (type == TYPE_MIAE) |
| iop_setup_miae(); |
| } |