blob: eb53a2175994142c10844cc06ec8ed08e30acfd1 [file] [log] [blame]
/*
* LG Optimus Black codename sniper config
*
* Copyright (C) 2015 Paul Kocialkowski <contact@paulk.fr>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <asm/arch/cpu.h>
#include <asm/arch/omap.h>
/*
* CPU
*/
#define CONFIG_SYS_CACHELINE_SIZE 64
#define CONFIG_ARM_ARCH_CP15_ERRATA
#define CONFIG_ARM_ERRATA_454179
#define CONFIG_ARM_ERRATA_430973
#define CONFIG_ARM_ERRATA_621766
/*
* Platform
*/
#define CONFIG_OMAP
#define CONFIG_OMAP_COMMON
/*
* Board
*/
#define CONFIG_MISC_INIT_R
/*
* Clocks
*/
#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
#define CONFIG_SYS_PTV 2
#define V_NS16550_CLK 48000000
#define V_OSCK 26000000
#define V_SCLK (V_OSCK >> 1)
/*
* DRAM
*/
#define CONFIG_SDRC
#define CONFIG_NR_DRAM_BANKS 2
#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
/*
* Memory
*/
#define CONFIG_SYS_TEXT_BASE 0x80100000
#define CONFIG_SYS_SDRAM_BASE 0x80000000
#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_MALLOC_LEN (1024 * 1024 + CONFIG_ENV_SIZE)
/*
* GPIO
*/
#define CONFIG_OMAP_GPIO
#define CONFIG_OMAP3_GPIO_2
#define CONFIG_OMAP3_GPIO_3
#define CONFIG_OMAP3_GPIO_4
#define CONFIG_OMAP3_GPIO_5
#define CONFIG_OMAP3_GPIO_6
/*
* I2C
*/
#define CONFIG_SYS_I2C
#define CONFIG_SYS_OMAP24_I2C_SPEED 400000
#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
#define CONFIG_SYS_I2C_OMAP34XX
#define CONFIG_I2C_MULTI_BUS
/*
* Flash
*/
#define CONFIG_SYS_NO_FLASH
/*
* MMC
*/
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_OMAP_HSMMC
#define CONFIG_CMD_MMC
/*
* Power
*/
#define CONFIG_TWL4030_POWER
/*
* Input
*/
#define CONFIG_TWL4030_INPUT
/*
* Partitions
*/
#define CONFIG_PARTITION_UUIDS
#define CONFIG_CMD_PART
/*
* SPL
*/
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x40200000
#define CONFIG_SPL_MAX_SIZE (54 * 1024)
#define CONFIG_SPL_BSS_START_ADDR 0x80000000
#define CONFIG_SPL_BSS_MAX_SIZE (512 * 1024)
#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
#define CONFIG_SYS_SPL_MALLOC_SIZE (1024 * 1024)
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_POWER_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT
#define CONFIG_SPL_I2C_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION 2
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
/*
* Console
*/
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_CBSIZE 512
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) \
+ 16)
/*
* Serial
*/
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
#endif
#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
#define CONFIG_CONS_INDEX 3
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, \
115200 }
/*
* USB gadget
*/
#define CONFIG_USB_MUSB_PIO_ONLY
#define CONFIG_USB_MUSB_OMAP2PLUS
#define CONFIG_TWL4030_USB
/*
* Fastboot
*/
#define CONFIG_USB_FUNCTION_FASTBOOT
#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
#define CONFIG_FASTBOOT_BUF_SIZE 0x2000000
#define CONFIG_FASTBOOT_FLASH
#define CONFIG_FASTBOOT_FLASH_MMC_DEV 0
#define CONFIG_CMD_FASTBOOT
/*
* Environment
*/
#define CONFIG_ENV_SIZE (128 * 1024)
#define CONFIG_ENV_IS_NOWHERE
#define CONFIG_ENV_OVERWRITE
#define CONFIG_EXTRA_ENV_SETTINGS \
"kernel_addr_r=0x82000000\0" \
"loadaddr=0x82000000\0" \
"fdt_addr_r=0x88000000\0" \
"fdtaddr=0x88000000\0" \
"ramdisk_addr_r=0x88080000\0" \
"pxefile_addr_r=0x80100000\0" \
"scriptaddr=0x80000000\0" \
"bootm_size=0x10000000\0" \
"boot_mmc_dev=0\0" \
"kernel_mmc_part=3\0" \
"recovery_mmc_part=4\0" \
"fdtfile=omap3-sniper.dtb\0" \
"bootfile=/boot/extlinux/extlinux.conf\0" \
"bootargs=console=ttyO2,115200 vram=5M,0x9FA00000 omapfb.vram=0:5M\0"
/*
* ATAGs
*/
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_CMDLINE_TAG
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
#define CONFIG_SERIAL_TAG
/*
* Boot
*/
#define CONFIG_SYS_LOAD_ADDR 0x82000000
#define CONFIG_ANDROID_BOOT_IMAGE
#define CONFIG_BOOTCOMMAND \
"setenv boot_mmc_part ${kernel_mmc_part}; " \
"if test reboot-${reboot-mode} = reboot-r; then " \
"echo recovery; setenv boot_mmc_part ${recovery_mmc_part}; fi; " \
"if test reboot-${reboot-mode} = reboot-b; then " \
"echo fastboot; fastboot 0; fi; " \
"part start mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_start; " \
"part size mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_size; " \
"mmc dev ${boot_mmc_dev}; " \
"mmc read ${kernel_addr_r} ${boot_mmc_start} ${boot_mmc_size} && " \
"bootm ${kernel_addr_r};"
/*
* Defaults
*/
#include <config_defaults.h>
#include <config_distro_defaults.h>
#endif