blob: 69c4551ecae1f7e33d683a457591e305f01ae0cd [file] [log] [blame]
/*
* Copyright (C) 2012 Freescale Semiconductor, Inc.
* Author: Fabio Estevam <fabio.estevam@freescale.com>
*
* Copyright (C) 2013, 2014 TQ Systems (ported SabreSD to TQMa6x)
* Author: Markus Niebel <markus.niebel@tq-group.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <asm/arch/clock.h>
#include <asm/arch/mx6-pins.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/iomux.h>
#include <asm/arch/sys_proto.h>
#include <asm/errno.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/imx-common/mxc_i2c.h>
#include <common.h>
#include <fsl_esdhc.h>
#include <libfdt.h>
#include <i2c.h>
#include <mmc.h>
#include <power/pfuze100_pmic.h>
#include <power/pmic.h>
#include "tqma6_bb.h"
DECLARE_GLOBAL_DATA_PTR;
#define USDHC_CLK_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \
PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
#define GPIO_OUT_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_LOW | \
PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
#define GPIO_IN_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_LOW | \
PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
#define SPI_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
PAD_CTL_ODE | PAD_CTL_SRE_FAST)
int dram_init(void)
{
gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
return 0;
}
static const uint16_t tqma6_emmc_dsr = 0x0100;
/* eMMC on USDHCI3 always present */
static iomux_v3_cfg_t const tqma6_usdhc3_pads[] = {
NEW_PAD_CTRL(MX6_PAD_SD3_CLK__SD3_CLK, USDHC_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_SD3_CMD__SD3_CMD, USDHC_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_SD3_DAT0__SD3_DATA0, USDHC_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_SD3_DAT1__SD3_DATA1, USDHC_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_SD3_DAT2__SD3_DATA2, USDHC_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_SD3_DAT3__SD3_DATA3, USDHC_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_SD3_DAT4__SD3_DATA4, USDHC_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_SD3_DAT5__SD3_DATA5, USDHC_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_SD3_DAT6__SD3_DATA6, USDHC_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_SD3_DAT7__SD3_DATA7, USDHC_PAD_CTRL),
/* eMMC reset */
NEW_PAD_CTRL(MX6_PAD_SD3_RST__SD3_RESET, GPIO_OUT_PAD_CTRL),
};
/*
* According to board_mmc_init() the following map is done:
* (U-boot device node) (Physical Port)
* mmc0 eMMC (SD3) on TQMa6
* mmc1 .. n optional slots used on baseboard
*/
struct fsl_esdhc_cfg tqma6_usdhc_cfg = {
.esdhc_base = USDHC3_BASE_ADDR,
.max_bus_width = 8,
};
int board_mmc_getcd(struct mmc *mmc)
{
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
int ret = 0;
if (cfg->esdhc_base == USDHC3_BASE_ADDR)
/* eMMC/uSDHC3 is always present */
ret = 1;
else
ret = tqma6_bb_board_mmc_getcd(mmc);
return ret;
}
int board_mmc_getwp(struct mmc *mmc)
{
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
int ret = 0;
if (cfg->esdhc_base == USDHC3_BASE_ADDR)
/* eMMC/uSDHC3 is always present */
ret = 0;
else
ret = tqma6_bb_board_mmc_getwp(mmc);
return ret;
}
int board_mmc_init(bd_t *bis)
{
imx_iomux_v3_setup_multiple_pads(tqma6_usdhc3_pads,
ARRAY_SIZE(tqma6_usdhc3_pads));
tqma6_usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
if (fsl_esdhc_initialize(bis, &tqma6_usdhc_cfg)) {
puts("Warning: failed to initialize eMMC dev\n");
} else {
struct mmc *mmc = find_mmc_device(0);
if (mmc)
mmc_set_dsr(mmc, tqma6_emmc_dsr);
}
tqma6_bb_board_mmc_init(bis);
return 0;
}
static iomux_v3_cfg_t const tqma6_ecspi1_pads[] = {
/* SS1 */
NEW_PAD_CTRL(MX6_PAD_EIM_D19__GPIO3_IO19, SPI_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_EIM_D16__ECSPI1_SCLK, SPI_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_EIM_D17__ECSPI1_MISO, SPI_PAD_CTRL),
NEW_PAD_CTRL(MX6_PAD_EIM_D18__ECSPI1_MOSI, SPI_PAD_CTRL),
};
static unsigned const tqma6_ecspi1_cs[] = {
IMX_GPIO_NR(3, 19),
};
static void tqma6_iomuxc_spi(void)
{
unsigned i;
for (i = 0; i < ARRAY_SIZE(tqma6_ecspi1_cs); ++i)
gpio_direction_output(tqma6_ecspi1_cs[i], 1);
imx_iomux_v3_setup_multiple_pads(tqma6_ecspi1_pads,
ARRAY_SIZE(tqma6_ecspi1_pads));
}
static struct i2c_pads_info tqma6_i2c3_pads = {
/* I2C3: on board LM75, M24C64, */
.scl = {
.i2c_mode = NEW_PAD_CTRL(MX6_PAD_GPIO_5__I2C3_SCL,
I2C_PAD_CTRL),
.gpio_mode = NEW_PAD_CTRL(MX6_PAD_GPIO_5__GPIO1_IO05,
I2C_PAD_CTRL),
.gp = IMX_GPIO_NR(1, 5)
},
.sda = {
.i2c_mode = NEW_PAD_CTRL(MX6_PAD_GPIO_6__I2C3_SDA,
I2C_PAD_CTRL),
.gpio_mode = NEW_PAD_CTRL(MX6_PAD_GPIO_6__GPIO1_IO06,
I2C_PAD_CTRL),
.gp = IMX_GPIO_NR(1, 6)
}
};
static void tqma6_setup_i2c(void)
{
/* use logical index for bus, e.g. I2C1 -> 0 */
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &tqma6_i2c3_pads);
}
int board_early_init_f(void)
{
return tqma6_bb_board_early_init_f();
}
int board_init(void)
{
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
tqma6_iomuxc_spi();
tqma6_setup_i2c();
tqma6_bb_board_init();
return 0;
}
static const char *tqma6_get_boardname(void)
{
u32 cpurev = get_cpu_rev();
switch ((cpurev & 0xFF000) >> 12) {
case MXC_CPU_MX6SOLO:
return "TQMa6S";
break;
case MXC_CPU_MX6DL:
return "TQMa6DL";
break;
case MXC_CPU_MX6D:
return "TQMa6D";
break;
case MXC_CPU_MX6Q:
return "TQMa6Q";
break;
default:
return "??";
};
}
int board_late_init(void)
{
struct pmic *p;
u32 reg;
setenv("board_name", tqma6_get_boardname());
/*
* configure PFUZE100 PMIC:
* TODO: should go to power_init_board if bus switching is
* fixed in generic power code
*/
power_pfuze100_init(TQMA6_PFUZE100_I2C_BUS);
p = pmic_get("PFUZE100_PMIC");
if (p && !pmic_probe(p)) {
pmic_reg_read(p, PFUZE100_DEVICEID, &reg);
printf("PMIC: PFUZE100_PMIC ID=0x%02x\n", reg);
}
tqma6_bb_board_late_init();
return 0;
}
int checkboard(void)
{
printf("Board: %s on a %s\n", tqma6_get_boardname(),
tqma6_bb_get_boardname());
return 0;
}
/*
* Device Tree Support
*/
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
void ft_board_setup(void *blob, bd_t *bd)
{
/* bring in eMMC dsr settings */
do_fixup_by_path_u32(blob,
"/soc/aips-bus@02100000/usdhc@02198000",
"dsr", tqma6_emmc_dsr, 2);
tqma6_bb_ft_board_setup(blob, bd);
}
#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */