arch/mips/cpu/xburst/start.S

/*
 *  Startup Code for MIPS32 XBURST CPU-core
 *
 *  Copyright (c) 2010 Xiangfu Liu <xiangfu@sharism.cc>
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#include <config.h>
#include <version.h>
#include <asm/regdef.h>
#include <asm/mipsregs.h>
#include <asm/addrspace.h>
#include <asm/cacheops.h>

	.set noreorder

	.globl _start
	.text
_start:
	/* Initialize $gp */
	bal	1f
	 nop
	.word	_gp
1:
	lw	gp, 0(ra)

	/* Set up temporary stack */
	li	sp, CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET

	la	t9, board_init_f
	jr	t9
	 nop

/*
 * void relocate_code (addr_sp, gd, addr_moni)
 *
 * This "function" does not return, instead it continues in RAM
 * after relocating the monitor code.
 *
 * a0 = addr_sp
 * a1 = gd
 * a2 = destination address
 */
	.globl	relocate_code
	.ent	relocate_code
relocate_code:
	move	sp, a0			# set new stack pointer

	li	t0, CONFIG_SYS_MONITOR_BASE
	la	t3, in_ram
	lw	t2, -12(t3)		# t2 <-- uboot_end_data
	move	t1, a2

	/*
	 * Fix $gp:
	 *
	 * New $gp = (Old $gp - CONFIG_SYS_MONITOR_BASE) + Destination Address
	 */
	move	t6, gp
	sub	gp, CONFIG_SYS_MONITOR_BASE
	add	gp, a2			# gp now adjusted
	sub	t6, gp, t6		# t6 <-- relocation offset

	/*
	 * t0 = source address
	 * t1 = target address
	 * t2 = source end address
	 */
1:
	lw	t3, 0(t0)
	sw	t3, 0(t1)
	addu	t0, 4
	ble	t0, t2, 1b
	 addu	t1, 4

	/* If caches were enabled, we would have to flush them here. */

	/* flush d-cache */
	li	t0, KSEG0
	addi	t1, t0, CONFIG_SYS_DCACHE_SIZE
2:
	cache	INDEX_WRITEBACK_INV_D, 0(t0)
	bne	t0, t1, 2b
	 addi	t0, CONFIG_SYS_CACHELINE_SIZE

	sync

	/* flush i-cache */
	li	t0, KSEG0
	addi	t1, t0, CONFIG_SYS_ICACHE_SIZE
3:
	cache	INDEX_INVALIDATE_I, 0(t0)
	bne	t0, t1, 3b
	 addi	t0, CONFIG_SYS_CACHELINE_SIZE

	/* Invalidate BTB */
	mfc0	t0, CP0_CONFIG, 7
	nop
	ori	t0, 2
	mtc0	t0, CP0_CONFIG, 7
	nop

	/* Jump to where we've relocated ourselves */
	addi	t0, a2, in_ram - _start
	jr	t0
	 nop

	.word	_gp
	.word	_GLOBAL_OFFSET_TABLE_
	.word	uboot_end_data
	.word	uboot_end
	.word	num_got_entries

in_ram:
	/*
	 * Now we want to update GOT.
	 *
	 * GOT[0] is reserved. GOT[1] is also reserved for the dynamic object
	 * generated by GNU ld. Skip these reserved entries from relocation.
	 */
	lw	t3, -4(t0)		# t3 <-- num_got_entries
	lw	t4, -16(t0)		# t4 <-- _GLOBAL_OFFSET_TABLE_
	lw	t5, -20(t0)		# t5 <-- _gp
	sub	t4, t5			# compute offset
	add	t4, t4, gp		# t4 now holds relocated _G_O_T_
	addi	t4, t4, 8		# skipping first two entries
	li	t2, 2
1:
	lw	t1, 0(t4)
	beqz	t1, 2f
	 add	t1, t6
	sw	t1, 0(t4)
2:
	addi	t2, 1
	blt	t2, t3, 1b
	 addi	t4, 4

	/* Clear BSS */
	lw	t1, -12(t0)		# t1 <-- uboot_end_data
	lw	t2, -8(t0)		# t2 <-- uboot_end
	add	t1, t6			# adjust pointers
	add	t2, t6

	sub	t1, 4
1:	addi	t1, 4
	bltl	t1, t2, 1b
	 sw	zero, 0(t1)

	move	a0, a1			# a0 <-- gd
	la	t9, board_init_r
	jr	t9
	 move	a1, a2

	.end	relocate_code