| |
| /** |
| * @file IxAtmdAccCtrl.h |
| * |
| * @date 20-Mar-2002 |
| * |
| * @brief IxAtmdAcc Public API |
| * |
| * This file contains the public API of IxAtmdAcc, related to the |
| * control functions of the component. |
| * |
| * |
| * @par |
| * IXP400 SW Release version 2.0 |
| * |
| * -- Copyright Notice -- |
| * |
| * @par |
| * Copyright 2001-2005, Intel Corporation. |
| * All rights reserved. |
| * |
| * @par |
| * SPDX-License-Identifier: BSD-3-Clause |
| * @par |
| * -- End of Copyright Notice -- |
| */ |
| |
| /* ------------------------------------------------------ |
| Doxygen group definitions |
| ------------------------------------------------------ */ |
| |
| /** |
| * |
| * @defgroup IxAtmdAccCtrlAPI IXP400 ATM Driver Access (IxAtmdAcc) Control API |
| * |
| * @brief The public API for the IXP400 Atm Driver Control component |
| * |
| * IxAtmdAcc is the low level interface by which AAL PDU get transmitted |
| * to,and received from the Utopia bus |
| * |
| * This part is related to the Control configuration |
| * |
| * @{ |
| */ |
| |
| #ifndef IXATMDACCCTRL_H |
| #define IXATMDACCCTRL_H |
| |
| #include "IxAtmdAcc.h" |
| |
| /* ------------------------------------------------------ |
| AtmdAccCtrl Data Types definition |
| ------------------------------------------------------ */ |
| |
| /** |
| * |
| * @ingroup IxAtmdAccCtrlAPI |
| * |
| * @def IX_ATMDACC_PORT_DISABLE_IN_PROGRESS |
| * |
| * @brief Port enable return code |
| * |
| * This constant is used to tell IxAtmDAcc user that the port disable |
| * functions are not complete. The user can call ixAtmdAccPortDisableComplete() |
| * to find out when the disable has finished. The port enable can then proceed. |
| * |
| */ |
| #define IX_ATMDACC_PORT_DISABLE_IN_PROGRESS 5 |
| |
| /** |
| * |
| * @ingroup IxAtmdAccCtrlAPI |
| * |
| * @def IX_ATMDACC_ALLPDUS |
| * |
| * @brief All PDUs |
| * |
| * This constant is used to tell IxAtmDAcc to process all PDUs from |
| * the RX queue or the TX Done |
| * |
| * @sa IxAtmdAccRxDispatcher |
| * @sa IxAtmdAccTxDoneDispatcher |
| * |
| */ |
| #define IX_ATMDACC_ALLPDUS 0xffffffff |
| |
| /* ------------------------------------------------------ |
| Part of the IxAtmdAcc interface related to RX traffic |
| ------------------------------------------------------ */ |
| |
| /** |
| * |
| * @ingroup IxAtmdAccCtrlAPI |
| * |
| * @brief Callback prototype for notification of available PDUs for |
| * an Rx Q. |
| * |
| * This a protoype for a function which is called when there is at |
| * least one Pdu available for processing on a particular Rx Q. |
| * |
| * This function should call @a ixAtmdAccRxDispatch() with |
| * the aprropriate number of parameters to read and process the Rx Q. |
| * |
| * @sa ixAtmdAccRxDispatch |
| * @sa ixAtmdAccRxVcConnect |
| * @sa ixAtmdAccRxDispatcherRegister |
| * |
| * @param rxQueueId @ref IxAtmRxQueueId [in] indicates which RX queue to has Pdus to process. |
| * @param numberOfPdusToProcess unsigned int [in] indicates the minimum number of |
| * PDUs available to process all PDUs from the queue. |
| * @param reservedPtr unsigned int* [out] pointer to a int location which can |
| * be written to, but does not retain written values. This is |
| * provided to make this prototype compatible |
| * with @a ixAtmdAccRxDispatch() |
| * |
| * @return @li int - ignored. |
| * |
| */ |
| typedef IX_STATUS (*IxAtmdAccRxDispatcher) (IxAtmRxQueueId rxQueueId, |
| unsigned int numberOfPdusToProcess, |
| unsigned int *reservedPtr); |
| |
| /* ------------------------------------------------------ |
| Part of the IxAtmdAcc interface related to TX traffic |
| ------------------------------------------------------ */ |
| |
| /** |
| * |
| * @ingroup IxAtmdAccCtrlAPI |
| * |
| * @brief Callback prototype for transmitted mbuf when threshold level is |
| * crossed. |
| * |
| * IxAtmdAccTxDoneDispatcher is the prototype of the user function |
| * which get called when pdus are completely transmitted. This function |
| * is likely to call the @a ixAtmdAccTxDoneDispatch() function. |
| * |
| * This function is called when the number of available pdus for |
| * reception is crossing the threshold level as defined |
| * in @a ixAtmdAccTxDoneDispatcherRegister() |
| * |
| * This function is called inside an Qmgr dispatch context. No system |
| * resource or interrupt-unsafe feature should be used inside this |
| * callback. |
| * |
| * Transmitted buffers recycling implementation is a sytem-wide mechanism |
| * and needs to be set before any traffic is started. If this threshold |
| * mechanism is not used, the user is responsible for polling the |
| * transmitted buffers with @a ixAtmdAccTxDoneDispatch() |
| * and @a ixAtmdAccTxDoneLevelQuery() functions. |
| * |
| * @sa ixAtmdAccTxDoneDispatcherRegister |
| * @sa ixAtmdAccTxDoneDispatch |
| * @sa ixAtmdAccTxDoneLevelQuery |
| * |
| * @param numberOfPdusToProcess unsigned int [in] - The current number of pdus currently |
| * available for recycling |
| * @param *reservedPtr unsigned int [out] - pointer to a int location which can be |
| * written to but does not retain written values. This is provided |
| * to make this prototype compatible |
| * with @a ixAtmdAccTxDoneDispatch() |
| * |
| * @return @li IX_SUCCESS This is provided to make |
| * this prototype compatible with @a ixAtmdAccTxDoneDispatch() |
| * @return @li IX_FAIL invalid parameters or some unspecified internal |
| * error occured. This is provided to make |
| * this prototype compatible with @a ixAtmdAccTxDoneDispatch() |
| * |
| */ |
| typedef IX_STATUS (*IxAtmdAccTxDoneDispatcher) (unsigned int numberOfPdusToProcess, |
| unsigned int *reservedPtr); |
| |
| /** |
| * |
| * @ingroup IxAtmdAccCtrlAPI |
| * |
| * @brief Notification that the threshold number of scheduled cells |
| * remains in a port's transmit Q. |
| * |
| * The is the prototype for of the user notification function which |
| * gets called on a per-port basis, when the number of remaining |
| * scheduled cells to be transmitted decreases to the threshold level. |
| * The number of cells passed as a parameter can be used for scheduling |
| * purposes as the maximum number of cells that can be passed in a |
| * schedule table to the @a ixAtmdAccPortTxProcess() function. |
| * |
| * @sa ixAtmdAccPortTxCallbackRegister |
| * @sa ixAtmdAccPortTxProcess |
| * @sa ixAtmdAccPortTxFreeEntriesQuery |
| * |
| * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] |
| * @param numberOfAvailableCells unsigned int [in] - number of available |
| * cell entries.for the port |
| * |
| * @note - This functions shall not use system resources when used |
| * inside an interrupt context. |
| * |
| */ |
| typedef void (*IxAtmdAccPortTxLowCallback) (IxAtmLogicalPort port, |
| unsigned int numberOfAvailableCells); |
| |
| /** |
| * |
| * @ingroup IxAtmdAccCtrlAPI |
| * |
| * @brief Prototype to submit cells for transmission |
| * |
| * IxAtmdAccTxVcDemandUpdateCallback is the prototype of the callback |
| * function used by AtmD to notify an ATM Scheduler that the user of |
| * a VC has submitted cells for transmission. |
| * |
| * @sa IxAtmdAccTxVcDemandUpdateCallback |
| * @sa IxAtmdAccTxVcDemandClearCallback |
| * @sa IxAtmdAccTxSchVcIdGetCallback |
| * @sa ixAtmdAccPortTxScheduledModeEnable |
| * |
| * @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the VC to be updated |
| * is established |
| * @param vcId int [in] - Identifies the VC to be updated. This is the value |
| * returned by the @a IxAtmdAccTxSchVcIdGetCallback() call . |
| * @param numberOfCells unsigned int [in] - Indicates how many ATM cells should be added |
| * to the queue for this VC. |
| * |
| * @return @li IX_SUCCESS the function is registering the cell demand for |
| * this VC. |
| * @return @li IX_FAIL the function cannot register cell for this VC : the |
| * scheduler maybe overloaded or misconfigured |
| * |
| */ |
| typedef IX_STATUS (*IxAtmdAccTxVcDemandUpdateCallback) (IxAtmLogicalPort port, |
| int vcId, |
| unsigned int numberOfCells); |
| |
| /** |
| * |
| * @ingroup IxAtmdAccCtrlAPI |
| * |
| * @brief prototype to remove all currently queued cells from a |
| * registered VC |
| * |
| * IxAtmdAccTxVcDemandClearCallback is the prototype of the function |
| * to remove all currently queued cells from a registered VC. The |
| * pending cell count for the specified VC is reset to zero. After the |
| * use of this callback, the scheduler shall not schedule more cells |
| * for this VC. |
| * |
| * This callback function is called during a VC disconnection |
| * @a ixAtmdAccTxVcTryDisconnect() |
| * |
| * @sa IxAtmdAccTxVcDemandUpdateCallback |
| * @sa IxAtmdAccTxVcDemandClearCallback |
| * @sa IxAtmdAccTxSchVcIdGetCallback |
| * @sa ixAtmdAccPortTxScheduledModeEnable |
| * @sa ixAtmdAccTxVcTryDisconnect |
| * |
| * @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the VC to be cleared |
| * is established |
| * @param vcId int [in] - Identifies the VC to be cleared. This is the value |
| * returned by the @a IxAtmdAccTxSchVcIdGetCallback() call . |
| * |
| * @return none |
| * |
| */ |
| typedef void (*IxAtmdAccTxVcDemandClearCallback) (IxAtmLogicalPort port, |
| int vcId); |
| |
| /** |
| * |
| * @ingroup IxAtmdAccCtrlAPI |
| * |
| * @brief prototype to get a scheduler vc id |
| * |
| * IxAtmdAccTxSchVcIdGetCallback is the prototype of the function to get |
| * a scheduler vcId |
| * |
| * @sa IxAtmdAccTxVcDemandUpdateCallback |
| * @sa IxAtmdAccTxVcDemandClearCallback |
| * @sa IxAtmdAccTxSchVcIdGetCallback |
| * @sa ixAtmdAccPortTxScheduledModeEnable |
| * |
| * @param port @ref IxAtmLogicalPort [in] - Specifies the ATM logical port on which the VC is |
| * established |
| * @param vpi unsigned int [in] - For AAL0/AAL5 specifies the ATM vpi on which the |
| * VC is established. |
| * For OAM specifies the dedicated "OAM Tx channel" VPI. |
| * @param vci unsigned int [in] - For AAL0/AAL5 specifies the ATM vci on which the |
| * VC is established. |
| * For OAM specifies the dedicated "OAM Tx channel" VCI. |
| * @param connId @ref IxAtmConnId [in] - specifies the IxAtmdAcc connection Id already |
| * associated with this VC |
| * @param vcId int* [out] - pointer to a vcId |
| * |
| * @return @li IX_SUCCESS the function is returning a Scheduler vcId for this |
| * VC |
| * @return @li IX_FAIL the function cannot process scheduling for this VC. |
| * the contents of vcId is unspecified |
| * |
| */ |
| typedef IX_STATUS (*IxAtmdAccTxSchVcIdGetCallback) (IxAtmLogicalPort port, |
| unsigned int vpi, |
| unsigned int vci, |
| IxAtmConnId connId, |
| int *vcId); |
| |
| /* ------------------------------------------------------ |
| Part of the IxAtmdAcc interface related to RX traffic |
| ------------------------------------------------------ */ |
| |
| /** |
| * |
| * @ingroup IxAtmdAccCtrlAPI |
| * |
| * @fn ixAtmdAccRxDispatcherRegister ( |
| IxAtmRxQueueId queueId, |
| IxAtmdAccRxDispatcher callback) |
| * |
| * @brief Register a notification callback to be invoked when there is |
| * at least one entry on a particular Rx queue. |
| * |
| * This function registers a callback to be invoked when there is at |
| * least one entry in a particular queue. The registered callback is |
| * called every time when the hardware adds one or more pdus to the |
| * specified Rx queue. |
| * |
| * This function cannot be used when a Rx Vc using this queue is |
| * already existing. |
| * |
| * @note -The callback function can be the API function |
| * @a ixAtmdAccRxDispatch() : every time the threhold level |
| * of the queue is reached, the ixAtmdAccRxDispatch() is |
| * invoked to remove all entries from the queue. |
| * |
| * @sa ixAtmdAccRxDispatch |
| * @sa IxAtmdAccRxDispatcher |
| * |
| * @param queueId @ref IxAtmRxQueueId [in] RX queue identification |
| * @param callback @ref IxAtmdAccRxDispatcher [in] function triggering the delivery of incoming |
| * traffic. This parameter cannot be a null pointer. |
| * |
| * @return @li IX_SUCCESS Successful call to @a ixAtmdAccRxDispatcherRegister() |
| * @return @li IX_FAIL error in the parameters, or there is an |
| * already active RX VC for this queue or some unspecified |
| * internal error occurred. |
| * |
| */ |
| PUBLIC IX_STATUS ixAtmdAccRxDispatcherRegister ( |
| IxAtmRxQueueId queueId, |
| IxAtmdAccRxDispatcher callback); |
| |
| /** |
| * |
| * @ingroup IxAtmdAccCtrlAPI |
| * |
| * @fn ixAtmdAccRxDispatch (IxAtmRxQueueId rxQueueId, |
| unsigned int numberOfPdusToProcess, |
| unsigned int *numberOfPdusProcessedPtr) |
| * |
| * |
| * @brief Control function which executes Rx processing for a particular |
| * Rx stream. |
| * |
| * The @a IxAtmdAccRxDispatch() function is used to process received Pdus |
| * available from one of the two incoming RX streams. When this function |
| * is invoked, the incoming traffic (up to the number of PDUs passed as |
| * a parameter) will be transferred to the IxAtmdAcc users through the |
| * callback @a IxAtmdAccRxVcRxCallback(), as registered during the |
| * @a ixAtmdAccRxVcConnect() call. |
| * |
| * The user receive callbacks will be executed in the context of this |
| * function. |
| * |
| * Failing to use this function on a regular basis when there is traffic |
| * will block incoming traffic and can result in Pdus being dropped by |
| * the hardware. |
| * |
| * This should be used to control when received pdus are handed off from |
| * the hardware to Aal users from a particluar stream. The function can |
| * be used from a timer context, or can be registered as a callback in |
| * response to an rx stream threshold event, or can be used inside an |
| * active polling mechanism which is under user control. |
| * |
| * @note - The signature of this function is directly compatible with the |
| * callback prototype which can be register with @a ixAtmdAccRxDispatcherRegister(). |
| * |
| * @sa ixAtmdAccRxDispatcherRegister |
| * @sa IxAtmdAccRxVcRxCallback |
| * @sa ixAtmdAccRxVcFreeEntriesQuery |
| * |
| * @param rxQueueId @ref IxAtmRxQueueId [in] - indicates which RX queue to process. |
| * @param numberOfPdusToProcess unsigned int [in] - indicates the maxiumum number of PDU to |
| * remove from the RX queue. A value of IX_ATMDACC_ALLPDUS indicates |
| * to process all PDUs from the queue. This includes at least the PDUs |
| * in the queue when the fuction is invoked. Because of real-time |
| * constraints, there is no guarantee thatthe queue will be empty |
| * when the function exits. If this parameter is greater than the |
| * number of entries of the queues, the function will succeed |
| * and the parameter numberOfPdusProcessedPtr will reflect the exact |
| * number of PDUs processed. |
| * @param *numberOfPdusProcessedPtr unsigned int [out] - indicates the actual number of PDU |
| * processed during this call. This parameter cannot be a null |
| * pointer. |
| * |
| * @return @li IX_SUCCESS the number of PDUs as indicated in |
| * numberOfPdusProcessedPtr are removed from the RX queue and the VC callback |
| * are called. |
| * @return @li IX_FAIL invalid parameters or some unspecified internal |
| * error occured. |
| * |
| */ |
| PUBLIC IX_STATUS ixAtmdAccRxDispatch (IxAtmRxQueueId rxQueueId, |
| unsigned int numberOfPdusToProcess, |
| unsigned int *numberOfPdusProcessedPtr); |
| |
| /** |
| * |
| * @ingroup IxAtmdAccCtrlAPI |
| * |
| * @fn ixAtmdAccRxLevelQuery (IxAtmRxQueueId rxQueueId, |
| unsigned int *numberOfPdusPtr) |
| * |
| * @brief Query the number of entries in a particular RX queue. |
| * |
| * This function is used to retrieve the number of pdus received by |
| * the hardware and ready for distribution to users. |
| * |
| * @param rxQueueId @ref IxAtmRxQueueId [in] - indicates which of two RX queues to query. |
| * @param numberOfPdusPtr unsigned int* [out] - Pointer to store the number of available |
| * PDUs in the RX queue. This parameter cannot be a null pointer. |
| * |
| * @return @li IX_SUCCESS the value in numberOfPdusPtr specifies the |
| * number of incoming pdus waiting in this queue |
| * @return @li IX_FAIL an error occurs during processing. |
| * The value in numberOfPdusPtr is unspecified. |
| * |
| * @note - This function is reentrant, doesn't use system resources |
| * and can be used from an interrupt context. |
| * |
| */ |
| PUBLIC IX_STATUS ixAtmdAccRxLevelQuery (IxAtmRxQueueId rxQueueId, |
| unsigned int *numberOfPdusPtr); |
| |
| /** |
| * |
| * @ingroup IxAtmdAccCtrlAPI |
| * |
| * @fn ixAtmdAccRxQueueSizeQuery (IxAtmRxQueueId rxQueueId, |
| unsigned int *numberOfPdusPtr) |
| * |
| * @brief Query the size of a particular RX queue. |
| * |
| * This function is used to retrieve the number of pdus the system is |
| * able to queue when reception is complete. |
| * |
| * @param rxQueueId @ref IxAtmRxQueueId [in] - indicates which of two RX queues to query. |
| * @param numberOfPdusPtr unsigned int* [out] - Pointer to store the number of pdus |
| * the system is able to queue in the RX queue. This parameter |
| * cannot be a null pointer. |
| * |
| * @return @li IX_SUCCESS the value in numberOfPdusPtr specifies the |
| * number of pdus the system is able to queue. |
| * @return @li IX_FAIL an error occurs during processing. |
| * The value in numberOfPdusPtr is unspecified. |
| * |
| * @note - This function is reentrant, doesn't use system resources |
| * and can be used from an interrupt context. |
| * |
| */ |
| PUBLIC IX_STATUS ixAtmdAccRxQueueSizeQuery (IxAtmRxQueueId rxQueueId, |
| unsigned int *numberOfPdusPtr); |
| |
| /* ------------------------------------------------------ |
| Part of the IxAtmdAcc interface related to TX traffic |
| ------------------------------------------------------ */ |
| |
| /** |
| * |
| * @ingroup IxAtmdAccCtrlAPI |
| * |
| * @fn ixAtmdAccPortTxFreeEntriesQuery (IxAtmLogicalPort port, |
| unsigned int *numberOfCellsPtr) |
| * |
| * @brief Get the number of available cells the system can accept for |
| * transmission. |
| * |
| * The function is used to retrieve the number of cells that can be |
| * queued for transmission to the hardware. |
| * |
| * This number is based on the worst schedule table where one cell |
| * is stored in one schedule table entry, depending on the pdus size |
| * and mbuf size and fragmentation. |
| * |
| * This function doesn't use system resources and can be used from a |
| * timer context, or can be associated with a threshold event, or can |
| * be used inside an active polling mechanism |
| * |
| * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] |
| * @param numberOfCellsPtr unsigned int* [out] - number of available cells. |
| * This parameter cannot be a null pointer. |
| * |
| * @sa ixAtmdAccPortTxProcess |
| * |
| * @return @li IX_SUCCESS numberOfCellsPtr contains the number of cells that can be scheduled |
| * for this port. |
| * @return @li IX_FAIL error in the parameters, or some processing error |
| * occured. |
| * |
| */ |
| PUBLIC IX_STATUS ixAtmdAccPortTxFreeEntriesQuery (IxAtmLogicalPort port, |
| unsigned int *numberOfCellsPtr); |
| |
| /** |
| * |
| * @ingroup IxAtmdAccCtrlAPI |
| * |
| * @fn ixAtmdAccPortTxCallbackRegister (IxAtmLogicalPort port, |
| unsigned int numberOfCells, |
| IxAtmdAccPortTxLowCallback callback) |
| * |
| * @brief Configure the Tx port threshold value and register a callback to handle |
| * threshold notifications. |
| * |
| * This function sets the threshold in cells |
| * |
| * @sa ixAtmdAccPortTxCallbackRegister |
| * @sa ixAtmdAccPortTxProcess |
| * @sa ixAtmdAccPortTxFreeEntriesQuery |
| * |
| * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] |
| * @param numberOfCells unsigned int [in] - threshold value which triggers the callback |
| * invocation, This number has to be one of the |
| * values 0,1,2,4,8,16,32 .... |
| * The maximum value cannot be more than half of the txVc queue |
| * size (which can be retrieved using @a ixAtmdAccPortTxFreeEntriesQuery() |
| * before any Tx traffic is sent for this port) |
| * @param callback @ref IxAtmdAccPortTxLowCallback [in] - callback function to invoke when the threshold |
| * level is reached. |
| * This parameter cannot be a null pointer. |
| * |
| * @return @li IX_SUCCESS Successful call to @a ixAtmdAccPortTxCallbackRegister() |
| * @return @li IX_FAIL error in the parameters, Tx channel already set for this port |
| * threshold level is not correct or within the range regarding the |
| * queue size:or unspecified error during processing: |
| * |
| * @note - This callback function get called when the threshold level drops from |
| * (numberOfCells+1) cells to (numberOfCells) cells |
| * |
| * @note - This function should be called during system initialisation, |
| * outside an interrupt context |
| * |
| */ |
| PUBLIC IX_STATUS ixAtmdAccPortTxCallbackRegister (IxAtmLogicalPort port, |
| unsigned int numberOfCells, |
| IxAtmdAccPortTxLowCallback callback); |
| |
| /** |
| * |
| * @ingroup IxAtmdAccCtrlAPI |
| * |
| * @fn ixAtmdAccPortTxScheduledModeEnable (IxAtmLogicalPort port, |
| IxAtmdAccTxVcDemandUpdateCallback vcDemandUpdateCallback, |
| IxAtmdAccTxVcDemandClearCallback vcDemandClearCallback, |
| IxAtmdAccTxSchVcIdGetCallback vcIdGetCallback) |
| * |
| * @brief Put the port into Scheduled Mode |
| * |
| * This function puts the specified port into scheduled mode of |
| * transmission which means an external s/w entity controls the |
| * transmission of cells on this port. This faciltates traffic shaping on |
| * the port. |
| * |
| * Any buffers submitted on a VC for this port will be queued in IxAtmdAcc. |
| * The transmission of these buffers to and by the hardware will be driven |
| * by a transmit schedule submitted regulary in calls to |
| * @a ixAtmdAccPortTxProcess() by traffic shaping entity. |
| * |
| * The transmit schedule is expected to be dynamic in nature based on |
| * the demand in cells for each VC on the port. Hence the callback |
| * parameters provided to this function allow IxAtmdAcc to inform the |
| * shaping entity of demand changes for each VC on the port. |
| * |
| * By default a port is in Unscheduled Mode so if this function is not |
| * called, transmission of data is done without sheduling rules, on a |
| * first-come, first-out basis. |
| * |
| * Once a port is put in scheduled mode it cannot be reverted to |
| * un-scheduled mode. Note that unscheduled mode is not supported |
| * in ixp425 1.0 |
| * |
| * @note - This function should be called before any VCs have be |
| * connected on a port. Otherwise this function call will return failure. |
| * |
| * @note - This function uses internal locks and should not be called from |
| * an interrupt context |
| * |
| * @sa IxAtmdAccTxVcDemandUpdateCallback |
| * @sa IxAtmdAccTxVcDemandClearCallback |
| * @sa IxAtmdAccTxSchVcIdGetCallback |
| * @sa ixAtmdAccPortTxProcess |
| * |
| * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] |
| * @param vcDemandUpdateCallback @ref IxAtmdAccTxVcDemandUpdateCallback [in] - callback function used to update |
| * the number of outstanding cells for transmission. This parameter |
| * cannot be a null pointer. |
| * @param vcDemandClearCallback @ref IxAtmdAccTxVcDemandClearCallback [in] - callback function used to remove all |
| * clear the number of outstanding cells for a VC. This parameter |
| * cannot be a null pointer. |
| * @param vcIdGetCallback @ref IxAtmdAccTxSchVcIdGetCallback [in] - callback function used to exchange vc |
| * Identifiers between IxAtmdAcc and the entity supplying the |
| * transmit schedule. This parameter cannot be a null pointer. |
| * |
| * @return @li IX_SUCCESS scheduler registration is complete and the port |
| * is now in scheduled mode. |
| * @return @li IX_FAIL failed (wrong parameters, or traffic is already |
| * enabled on this port, possibly without ATM shaping) |
| * |
| */ |
| PUBLIC IX_STATUS ixAtmdAccPortTxScheduledModeEnable (IxAtmLogicalPort port, |
| IxAtmdAccTxVcDemandUpdateCallback vcDemandUpdateCallback, |
| IxAtmdAccTxVcDemandClearCallback vcDemandClearCallback, |
| IxAtmdAccTxSchVcIdGetCallback vcIdGetCallback); |
| |
| /** |
| * |
| * @ingroup IxAtmdAccCtrlAPI |
| * |
| * @fn ixAtmdAccPortTxProcess (IxAtmLogicalPort port, |
| IxAtmScheduleTable* scheduleTablePtr) |
| * |
| * @brief Transmit queue cells to the H/W based on the supplied schedule |
| * table. |
| * |
| * This function @a ixAtmdAccPortTxProcess() process the schedule |
| * table provided as a parameter to the function. As a result cells are |
| * sent to the underlaying hardware for transmission. |
| * |
| * The schedule table is executed in its entirety or not at all. So the |
| * onus is on the caller not to submit a table containing more cells than |
| * can be transmitted at that point. The maximum numbers that can be |
| * transmitted is guaranteed to be the number of cells as returned by the |
| * function @a ixAtmdAccPortTxFreeEntriesQuery(). |
| * |
| * When the scheduler is invoked on a threshold level, IxAtmdAcc gives the |
| * minimum number of cells (to ensure the callback will fire again later) |
| * and the maximum number of cells that @a ixAtmdAccPortTxProcess() |
| * will be able to process (assuming the ATM scheduler is able |
| * to produce the worst-case schedule table, i.e. one entry per cell). |
| * |
| * When invoked ouside a threshold level, the overall number of cells of |
| * the schedule table should be less than the number of cells returned |
| * by the @a ixAtmdAccPortTxFreeEntriesQuery() function. |
| * |
| * After invoking the @a ixAtmdAccPortTxProcess() function, it is the |
| * user choice to query again the queue level with the function |
| * @a ixAtmdAccPortTxFreeEntriesQuery() and, depending on a new cell |
| * number, submit an other schedule table. |
| * |
| * IxAtmdAcc will check that the number of cells in the schedule table |
| * is compatible with the current transmit level. If the |
| * |
| * Obsolete or invalid connection Id will be silently discarded. |
| * |
| * This function is not reentrant for the same port. |
| * |
| * This functions doesn't use system resources and can be used inside an |
| * interrupt context. |
| * |
| * This function is used as a response to the hardware requesting more |
| * cells to transmit. |
| * |
| * @sa ixAtmdAccPortTxScheduledModeEnable |
| * @sa ixAtmdAccPortTxFreeEntriesQuery |
| * @sa ixAtmdAccPortTxCallbackRegister |
| * @sa ixAtmdAccPortEnable |
| * |
| * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] |
| * @param scheduleTablePtr @ref IxAtmScheduleTable* [in] - pointer to a scheduler update table. The |
| * content of this table is not modified by this function. This |
| * parameter cannot be a null pointer. |
| * |
| * @return @li IX_SUCCESS the schedule table process is complete |
| * and cells are transmitted to the hardware |
| * @return @li IX_ATMDACC_WARNING : Traffic will be dropped: the schedule table exceed |
| * the hardware capacity If this error is ignored, further traffic |
| * and schedule will work correctly. |
| * Overscheduling does not occur when the schedule table does |
| * not contain more entries that the number of free entries returned |
| * by @a ixAtmdAccPortTxFreeEntriesQuery(). |
| * However, Disconnect attempts just after this error will fail permanently |
| * with the error code @a IX_ATMDACC_RESOURCES_STILL_ALLOCATED, and it is |
| * necessary to disable the port to make @a ixAtmdAccTxVcTryDisconnect() |
| * successful. |
| * @return @li IX_FAIL a wrong parameter is supplied, or the format of |
| * the schedule table is invalid, or the port is not Enabled, or |
| * an internal severe error occured. No cells is transmitted to the hardware |
| * |
| * @note - If the failure is linked to an overschedule of data cells |
| * the result is an inconsistency in the output traffic (one or many |
| * cells may be missing and the traffic contract is not respected). |
| * |
| */ |
| PUBLIC IX_STATUS ixAtmdAccPortTxProcess (IxAtmLogicalPort port, |
| IxAtmScheduleTable* scheduleTablePtr); |
| |
| /** |
| * |
| * @ingroup IxAtmdAccCtrlAPI |
| * |
| * @fn ixAtmdAccTxDoneDispatch (unsigned int numberOfPdusToProcess, |
| unsigned int *numberOfPdusProcessedPtr) |
| * |
| * @brief Process a number of pending transmit done pdus from the hardware. |
| * |
| * As a by-product of Atm transmit operation buffers which transmission |
| * is complete need to be recycled to users. This function is invoked |
| * to service the oustanding list of transmitted buffers and pass them |
| * to VC users. |
| * |
| * Users are handed back pdus by invoking the free callback registered |
| * during the @a ixAtmdAccTxVcConnect() call. |
| * |
| * There is a single Tx done stream servicing all active Atm Tx ports |
| * which can contain a maximum of 64 entries. If this stream fills port |
| * transmission will stop so this function must be call sufficently |
| * frequently to ensure no disruption to the transmit operation. |
| * |
| * This function can be used from a timer context, or can be associated |
| * with a TxDone level threshold event (see @a ixAtmdAccTxDoneDispatcherRegister() ), |
| * or can be used inside an active polling mechanism under user control. |
| * |
| * For ease of use the signature of this function is compatible with the |
| * TxDone threshold event callback prototype. |
| * |
| * This functions can be used inside an interrupt context. |
| * |
| * @sa ixAtmdAccTxDoneDispatcherRegister |
| * @sa IxAtmdAccTxVcBufferReturnCallback |
| * @sa ixAtmdAccTxDoneLevelQuery |
| * |
| * @param numberOfPdusToProcess unsigned int [in] - maxiumum number of pdus to remove |
| * from the TX Done queue |
| * @param *numberOfPdusProcessedPtr unsigned int [out] - number of pdus removed from |
| * the TX Done queue. This parameter cannot be a null pointer. |
| * |
| * @return @li IX_SUCCESS the number of pdus as indicated in |
| * numberOfPdusToProcess are removed from the TX Done hardware |
| * and passed to the user through the Tx Done callback registered |
| * during a call to @a ixAtmdAccTxVcConnect() |
| * @return @li IX_FAIL invalid parameters or numberOfPdusProcessedPtr is |
| * a null pointer or some unspecified internal error occured. |
| * |
| */ |
| PUBLIC IX_STATUS |
| ixAtmdAccTxDoneDispatch (unsigned int numberOfPdusToProcess, |
| unsigned int *numberOfPdusProcessedPtr); |
| |
| /** |
| * |
| * @ingroup IxAtmdAccCtrlAPI |
| * |
| * @fn ixAtmdAccTxDoneLevelQuery (unsigned int *numberOfPdusPtr) |
| * |
| * @brief Query the current number of transmit pdus ready for |
| * recycling. |
| * |
| * This function is used to get the number of transmitted pdus which |
| * the hardware is ready to hand back to user. |
| * |
| * This function can be used from a timer context, or can be associated |
| * with a threshold event, on can be used inside an active polling |
| * mechanism |
| * |
| * @sa ixAtmdAccTxDoneDispatch |
| * |
| * @param *numberOfPdusPtr unsigned int [out] - Pointer to the number of pdus transmitted |
| * at the time of this function call, and ready for recycling |
| * This parameter cannot be a null pointer. |
| * |
| * @return @li IX_SUCCESS numberOfPdusPtr contains the number of pdus |
| * ready for recycling at the time of this function call |
| * |
| * @return @li IX_FAIL wrong parameter (null pointer as parameter).or |
| * unspecified rocessing error occurs..The value in numberOfPdusPtr |
| * is unspecified. |
| * |
| */ |
| PUBLIC IX_STATUS |
| ixAtmdAccTxDoneLevelQuery (unsigned int *numberOfPdusPtr); |
| |
| /** |
| * |
| * @ingroup IxAtmdAccCtrlAPI |
| * |
| * @fn ixAtmdAccTxDoneQueueSizeQuery (unsigned int *numberOfPdusPtr) |
| * |
| * @brief Query the TxDone queue size. |
| * |
| * This function is used to get the number of pdus which |
| * the hardware is able to store after transmission is complete |
| * |
| * The returned value can be used to set a threshold and enable |
| * a callback to be notified when the number of pdus is going over |
| * the threshold. |
| * |
| * @sa ixAtmdAccTxDoneDispatcherRegister |
| * |
| * @param *numberOfPdusPtr unsigned int [out] - Pointer to the number of pdus the system |
| * is able to queue after transmission |
| * |
| * @return @li IX_SUCCESS numberOfPdusPtr contains the the number of |
| * pdus the system is able to queue after transmission |
| * @return @li IX_FAIL wrong parameter (null pointer as parameter).or |
| * unspecified rocessing error occurs..The value in numberOfPdusPtr |
| * is unspecified. |
| * |
| * @note - This function is reentrant, doesn't use system resources |
| * and can be used from an interrupt context. |
| */ |
| PUBLIC IX_STATUS |
| ixAtmdAccTxDoneQueueSizeQuery (unsigned int *numberOfPdusPtr); |
| |
| /** |
| * |
| * @ingroup IxAtmdAccCtrlAPI |
| * |
| * @fn ixAtmdAccTxDoneDispatcherRegister (unsigned int numberOfPdus, |
| IxAtmdAccTxDoneDispatcher notificationCallback) |
| * |
| * @brief Configure the Tx Done stream threshold value and register a |
| * callback to handle threshold notifications. |
| * |
| * This function sets the threshold level in term of number of pdus at |
| * which the supplied notification function should be called. |
| * |
| * The higher the threshold value is, the less events will be necessary |
| * to process transmitted buffers. |
| * |
| * Transmitted buffers recycling implementation is a sytem-wide mechanism |
| * and needs to be set prior any traffic is started. If this threshold |
| * mechanism is not used, the user is responsible for polling the |
| * transmitted buffers thanks to @a ixAtmdAccTxDoneDispatch() and |
| * @a ixAtmdAccTxDoneLevelQuery() functions. |
| * |
| * This function should be called during system initialisation outside |
| * an interrupt context |
| * |
| * @sa ixAtmdAccTxDoneDispatcherRegister |
| * @sa ixAtmdAccTxDoneDispatch |
| * @sa ixAtmdAccTxDoneLevelQuery |
| * |
| * @param numberOfPdus unsigned int [in] - The number of TxDone pdus which triggers the |
| * callback invocation This number has to be a power of 2, one of the |
| * values 0,1,2,4,8,16,32 ... |
| * The maximum value cannot be more than half of the txDone queue |
| * size (which can be retrieved using @a ixAtmdAccTxDoneQueueSizeQuery()) |
| * @param notificationCallback @ref IxAtmdAccTxDoneDispatcher [in] - The function to invoke. (This |
| * parameter can be @a ixAtmdAccTxDoneDispatch()).This |
| * parameter ust not be a null pointer. |
| * |
| * @return @li IX_SUCCESS Successful call to ixAtmdAccTxDoneDispatcherRegister |
| * @return @li IX_FAIL error in the parameters: |
| * |
| * @note - The notificationCallback will be called exactly when the threshold level |
| * will increase from (numberOfPdus) to (numberOfPdus+1) |
| * |
| * @note - If there is no Tx traffic, there is no guarantee that TxDone Pdus will |
| * be released to the user (when txDone level is permanently under the threshold |
| * level. One of the preffered way to return resources to the user is to use |
| * a mix of txDone notifications, used together with a slow |
| * rate timer and an exclusion mechanism protecting from re-entrancy |
| * |
| * @note - The TxDone threshold will only hand back buffers when the threshold level is |
| * crossed. Setting this threshold to a great number reduce the interrupt rate |
| * and the cpu load, but also increase the number of outstanding mbufs and has |
| * a system wide impact when these mbufs are needed by other components. |
| * |
| */ |
| PUBLIC IX_STATUS ixAtmdAccTxDoneDispatcherRegister (unsigned int numberOfPdus, |
| IxAtmdAccTxDoneDispatcher notificationCallback); |
| |
| /* ------------------------------------------------------ |
| Part of the IxAtmdAcc interface related to Utopia config |
| ------------------------------------------------------ */ |
| |
| /** |
| * |
| * @ingroup IxAtmdAccCtrlAPI |
| * |
| * @defgroup IxAtmdAccUtopiaCtrlAPI IXP400 ATM Driver Access (IxAtmdAcc) Utopia Control API |
| * |
| * @brief The public API for the IXP400 Atm Driver Control component |
| * |
| * IxAtmdAcc is the low level interface by which AAL PDU get |
| * transmitted to,and received from the Utopia bus |
| * |
| * This part is related to the UTOPIA configuration. |
| * |
| * @{ |
| */ |
| |
| /** |
| * |
| * @brief Utopia configuration |
| * |
| * This structure is used to set the Utopia parameters |
| * @li contains the values of Utopia registers, to be set during initialisation |
| * @li contains debug commands for NPE, to be used during development steps |
| * |
| * @note - the exact description of all parameters is done in the Utopia reference |
| * documents. |
| * |
| */ |
| typedef struct |
| { |
| /** |
| * @ingroup IxAtmdAccUtopiaCtrlAPI |
| * @struct UtTxConfig_ |
| * @brief Utopia Tx Config Register |
| */ |
| struct UtTxConfig_ |
| { |
| |
| unsigned int reserved_1:1; /**< [31] These bits are always 0.*/ |
| unsigned int txInterface:1; /**< [30] Utopia Transmit Interface. The following encoding |
| * is used to set the Utopia Transmit interface as ATM master |
| * or PHY slave: |
| * @li 1 - PHY |
| * @li 0 - ATM |
| */ |
| unsigned int txMode:1; /**< [29] Utopia Transmit Mode. The following encoding is used |
| * to set the Utopia Transmit mode to SPHY or MPHY: |
| * @li 1 - SPHY |
| * @li 0 - MPHY |
| */ |
| unsigned int txOctet:1; /**< [28] Utopia Transmit cell transfer protocol. Used to set |
| * the Utopia cell transfer protocol to Octet-level handshaking. |
| * Note this is only applicable in SPHY mode. |
| * @li 1 - Octet-handshaking enabled |
| * @li 0 - Cell-handshaking enabled |
| */ |
| unsigned int txParity:1; /**< [27] Utopia Transmit parity enabled when set. TxEvenParity |
| * defines the parity format odd/even. |
| * @li 1 - Enable Parity generation. |
| * @li 0 - ut_op_prty held low. |
| */ |
| unsigned int txEvenParity:1; /**< [26] Utopia Transmit Parity Mode |
| * @li 1 - Even Parity Generated. |
| * @li 0 - Odd Parity Generated. |
| */ |
| unsigned int txHEC:1; /**< [25] Header Error Check Insertion Mode. Specifies if the transmit |
| * cell header check byte is calculated and inserted when set. |
| * @li 1 - Generate HEC. |
| * @li 0 - Disable HEC generation. |
| */ |
| unsigned int txCOSET:1; /**< [24] If enabled the HEC is Exclusive-OR'ed with the value 0x55 before |
| * being presented on the Utopia bus. |
| * @li 1 - Enable HEC ExOR with value 0x55 |
| * @li 0 - Use generated HEC value. |
| */ |
| |
| unsigned int reserved_2:1; /**< [23] These bits are always 0 |
| */ |
| unsigned int txCellSize:7; /**< [22:16] Transmit expected cell size. Configures the cell size |
| * for the transmit module: Values between 52-64 are valid. |
| */ |
| unsigned int reserved_3:3; /**< [15:13] These bits are always 0 */ |
| unsigned int txAddrRange:5; /**< [12:8] When configured as an ATM master in MPHY mode this |
| * register specifies the upper limit of the PHY polling logical |
| * range. The number of active PHYs are TxAddrRange + 1. |
| */ |
| unsigned int reserved_4:3; /**< [7:5] These bits are always 0 */ |
| unsigned int txPHYAddr:5; /**< [4:0] When configured as a slave in an MPHY system this register |
| * specifies the physical address of the PHY. |
| */ |
| } |
| |
| utTxConfig; /**< Tx config Utopia register */ |
| |
| /** |
| * @ingroup IxAtmdAccUtopiaCtrlAPI |
| * @struct UtTxStatsConfig_ |
| * @brief Utopia Tx stats Register |
| */ |
| struct UtTxStatsConfig_ |
| { |
| |
| unsigned int vpi:12; /**< [31:20] ATM VPI [11:0] OR GFC [3:0] and VPI [7:0] |
| @li Note: if VCStatsTxGFC is set to 0 the GFC field is ignored in test. */ |
| |
| unsigned int vci:16; /**< [19:4] ATM VCI [15:0] or PHY Address[4] */ |
| |
| unsigned int pti:3; /**< [3:1] ATM PTI [2:0] or PHY Address[3:1] |
| @li Note: if VCStatsTxPTI is set to 0 the PTI field is ignored in test. |
| @li Note: if VCStatsTxEnb is set to 0 only the transmit PHY port |
| address as defined by this register is used for ATM statistics [4:0]. */ |
| |
| unsigned int clp:1; /**< [0] ATM CLP or PHY Address [0] |
| @li Note: if VCStatsTxCLP is set to 0 the CLP field is ignored in test. |
| @li Note: if VCStatsTxEnb is set to 0 only the transmit PHY port |
| address as defined by this register is used for ATM statistics [4:0]. */ |
| } |
| |
| utTxStatsConfig; /**< Tx stats config Utopia register */ |
| |
| /** |
| * @ingroup IxAtmdAccUtopiaCtrlAPI |
| * @struct UtTxDefineIdle_ |
| * @brief Utopia Tx idle cells Register |
| */ |
| struct UtTxDefineIdle_ |
| { |
| |
| unsigned int vpi:12; /**< [31:20] ATM VPI [11:0] OR GFC [3:0] and VPI [7:0] |
| @li Note: if VCIdleTxGFC is set to 0 the GFC field is ignored in test. */ |
| |
| unsigned int vci:16; /**< [19:4] ATM VCI [15:0] */ |
| |
| unsigned int pti:3; /**< [3:1] ATM PTI PTI [2:0] |
| @li Note: if VCIdleTxPTI is set to 0 the PTI field is ignored in test.*/ |
| |
| unsigned int clp:1; /**< [0] ATM CLP [0] |
| @li Note: if VCIdleTxCLP is set to 0 the CLP field is ignored in test.*/ |
| } |
| |
| utTxDefineIdle; /**< Tx idle cell config Utopia register */ |
| |
| /** |
| * @ingroup IxAtmdAccUtopiaCtrlAPI |
| * @struct UtTxEnableFields_ |
| * @brief Utopia Tx ienable fields Register |
| */ |
| struct UtTxEnableFields_ |
| { |
| |
| unsigned int defineTxIdleGFC:1; /**< [31] This register is used to include or exclude the GFC |
| field of the ATM header when testing for Idle cells. |
| @li 1 - GFC field is valid. |
| @li 0 - GFC field ignored.*/ |
| |
| unsigned int defineTxIdlePTI:1; /**< [30] This register is used to include or exclude the PTI |
| field of the ATM header when testing for Idle cells. |
| @li 1 - PTI field is valid |
| @li 0 - PTI field ignored.*/ |
| |
| unsigned int defineTxIdleCLP:1; /**< [29] This register is used to include or |
| exclude the CLP field of the ATM header when testing for Idle cells. |
| @li 1 - CLP field is valid. |
| @li 0 - CLP field ignored. */ |
| |
| unsigned int phyStatsTxEnb:1; /**< [28] This register is used to enable or disable ATM |
| statistics gathering based on the specified PHY address as defined |
| in TxStatsConfig register. |
| @li 1 - Enable statistics for specified transmit PHY address. |
| @li 0 - Disable statistics for specified transmit PHY address. */ |
| |
| unsigned int vcStatsTxEnb:1; /**< [27] This register is used to change the ATM |
| statistics-gathering mode from the specified logical PHY address |
| to a specific VPI/VCI address. |
| @li 1 - Enable statistics for specified VPI/VCI address. |
| @li 0 - Disable statistics for specified VPI/VCI address */ |
| |
| unsigned int vcStatsTxGFC:1; /**< [26] This register is used to include or exclude the GFC |
| field of the ATM header when ATM VPI/VCI statistics are enabled. |
| GFC is only available at the UNI and uses the first 4-bits of |
| the VPI field. |
| @li 1 - GFC field is valid |
| @li 0 - GFC field ignored.*/ |
| |
| unsigned int vcStatsTxPTI:1; /**< [25] This register is used to include or exclude the PTI |
| field of the ATM header when ATM VPI/VCI statistics are enabled. |
| @li 1 - PTI field is valid |
| @li 0 - PTI field ignored.*/ |
| |
| unsigned int vcStatsTxCLP:1; /**< [24] This register is used to include or exclude the CLP |
| field of the ATM header when ATM VPI/VCI statistics are enabled. |
| @li 1 - CLP field is valid |
| @li 0 - CLP field ignored. */ |
| |
| unsigned int reserved_1:3; /**< [23-21] These bits are always 0 */ |
| |
| unsigned int txPollStsInt:1; /**< [20] Enable the assertion of the ucp_tx_poll_sts condition |
| where there is a change in polling status. |
| @li 1 - ucp_tx_poll_sts asserted whenever there is a change in status |
| @li 0 - ucp_tx_poll_sts asserted if ANY transmit PHY is available |
| */ |
| unsigned int txCellOvrInt:1; /**< [19] Enable TxCellCount overflow CBI Transmit Status condition |
| assertion. |
| @li 1 - If TxCellCountOvr is set assert the Transmit Status Condition. |
| @li 0 - No CBI Transmit Status condition assertion */ |
| |
| unsigned int txIdleCellOvrInt:1; /**< [18] Enable TxIdleCellCount overflow Transmit Status Condition |
| @li 1 - If TxIdleCellCountOvr is set assert the Transmit Status Condition |
| @li 0 - No CBI Transmit Status condition assertion..*/ |
| |
| unsigned int enbIdleCellCnt:1; /**< [17] Enable Transmit Idle Cell Count. |
| @li 1 - Enable count of Idle cells transmitted. |
| @li 0 - No count is maintained. */ |
| |
| unsigned int enbTxCellCnt:1; /**< [16] Enable Transmit Valid Cell Count of non-idle/non-error cells |
| @li 1 - Enable count of valid cells transmitted- non-idle/non-error |
| @li 0 - No count is maintained.*/ |
| |
| unsigned int reserved_2:16; /**< [15:0] These bits are always 0 */ |
| } utTxEnableFields; /**< Tx enable Utopia register */ |
| |
| /** |
| * @ingroup IxAtmdAccUtopiaCtrlAPI |
| * @struct UtTxTransTable0_ |
| * @brief Utopia Tx translation table Register |
| */ |
| struct UtTxTransTable0_ |
| { |
| |
| unsigned int phy0:5; /**< [31-27] Tx Mapping value of logical phy 0 */ |
| |
| unsigned int phy1:5; /**< [26-22] Tx Mapping value of logical phy 1 */ |
| |
| unsigned int phy2:5; /**< [21-17] Tx Mapping value of logical phy 2 */ |
| |
| unsigned int reserved_1:1; /**< [16] These bits are always 0.*/ |
| |
| unsigned int phy3:5; /**< [15-11] Tx Mapping value of logical phy 3 */ |
| |
| unsigned int phy4:5; /**< [10-6] Tx Mapping value of logical phy 4 */ |
| |
| unsigned int phy5:5; /**< [5-1] Tx Mapping value of logical phy 5 */ |
| |
| unsigned int reserved_2:1; /**< [0] These bits are always 0 */ |
| } utTxTransTable0; /**< Tx translation table */ |
| |
| /** |
| * @ingroup IxAtmdAccUtopiaCtrlAPI |
| * @struct UtTxTransTable1_ |
| * @brief Utopia Tx translation table Register |
| */ |
| struct UtTxTransTable1_ |
| { |
| |
| unsigned int phy6:5; /**< [31-27] Tx Mapping value of logical phy 6 */ |
| |
| unsigned int phy7:5; /**< [26-22] Tx Mapping value of logical phy 7 */ |
| |
| unsigned int phy8:5; /**< [21-17] Tx Mapping value of logical phy 8 */ |
| |
| unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ |
| |
| unsigned int phy9:5; /**< [15-11] Tx Mapping value of logical phy 3 */ |
| |
| unsigned int phy10:5; /**< [10-6] Tx Mapping value of logical phy 4 */ |
| |
| unsigned int phy11:5; /**< [5-1] Tx Mapping value of logical phy 5 */ |
| |
| unsigned int reserved_2:1; /**< [0] These bits are always 0 */ |
| } utTxTransTable1; /**< Tx translation table */ |
| |
| /** |
| * @ingroup IxAtmdAccUtopiaCtrlAPI |
| * @struct UtTxTransTable2_ |
| * @brief Utopia Tx translation table Register |
| */ |
| struct UtTxTransTable2_ |
| { |
| |
| unsigned int phy12:5; /**< [31-27] Tx Mapping value of logical phy 6 */ |
| |
| unsigned int phy13:5; /**< [26-22] Tx Mapping value of logical phy 7 */ |
| |
| unsigned int phy14:5; /**< [21-17] Tx Mapping value of logical phy 8 */ |
| |
| unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ |
| |
| unsigned int phy15:5; /**< [15-11] Tx Mapping value of logical phy 3 */ |
| |
| unsigned int phy16:5; /**< [10-6] Tx Mapping value of logical phy 4 */ |
| |
| unsigned int phy17:5; /**< [5-1] Tx Mapping value of logical phy 5 */ |
| |
| unsigned int reserved_2:1; /**< [0] These bits are always 0 */ |
| } utTxTransTable2; /**< Tx translation table */ |
| |
| /** |
| * @ingroup IxAtmdAccUtopiaCtrlAPI |
| * @struct UtTxTransTable3_ |
| * @brief Utopia Tx translation table Register |
| */ |
| struct UtTxTransTable3_ |
| { |
| |
| unsigned int phy18:5; /**< [31-27] Tx Mapping value of logical phy 6 */ |
| |
| unsigned int phy19:5; /**< [26-22] Tx Mapping value of logical phy 7 */ |
| |
| unsigned int phy20:5; /**< [21-17] Tx Mapping value of logical phy 8 */ |
| |
| unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ |
| |
| unsigned int phy21:5; /**< [15-11] Tx Mapping value of logical phy 3 */ |
| |
| unsigned int phy22:5; /**< [10-6] Tx Mapping value of logical phy 4 */ |
| |
| unsigned int phy23:5; /**< [5-1] Tx Mapping value of logical phy 5 */ |
| |
| unsigned int reserved_2:1; /**< [0] These bits are always 0 */ |
| } utTxTransTable3; /**< Tx translation table */ |
| |
| /** |
| * @ingroup IxAtmdAccUtopiaCtrlAPI |
| * @struct UtTxTransTable4_ |
| * @brief Utopia Tx translation table Register |
| */ |
| struct UtTxTransTable4_ |
| { |
| |
| unsigned int phy24:5; /**< [31-27] Tx Mapping value of logical phy 6 */ |
| |
| unsigned int phy25:5; /**< [26-22] Tx Mapping value of logical phy 7 */ |
| |
| unsigned int phy26:5; /**< [21-17] Tx Mapping value of logical phy 8 */ |
| |
| unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ |
| |
| unsigned int phy27:5; /**< [15-11] Tx Mapping value of logical phy 3 */ |
| |
| unsigned int phy28:5; /**< [10-6] Tx Mapping value of logical phy 4 */ |
| |
| unsigned int phy29:5; /**< [5-1] Tx Mapping value of logical phy 5 */ |
| |
| unsigned int reserved_2:1; /**< [0] These bits are always 0 */ |
| } utTxTransTable4; /**< Tx translation table */ |
| |
| /** |
| * @ingroup IxAtmdAccUtopiaCtrlAPI |
| * @struct UtTxTransTable5_ |
| * @brief Utopia Tx translation table Register |
| */ |
| struct UtTxTransTable5_ |
| { |
| |
| unsigned int phy30:5; /**< [31-27] Tx Mapping value of logical phy 6 */ |
| |
| unsigned int reserved_1:27; /**< [26-0] These bits are always 0 */ |
| |
| } utTxTransTable5; /**< Tx translation table */ |
| |
| /** |
| * @ingroup IxAtmdAccUtopiaCtrlAPI |
| * @struct UtRxConfig_ |
| * @brief Utopia Rx config Register |
| */ |
| struct UtRxConfig_ |
| { |
| |
| unsigned int rxInterface:1; /**< [31] Utopia Receive Interface. The following encoding is used |
| to set the Utopia Receive interface as ATM master or PHY slave: |
| @li 1 - PHY |
| @li 0 - ATM */ |
| |
| unsigned int rxMode:1; /**< [30] Utopia Receive Mode. The following encoding is used to set |
| the Utopia Receive mode to SPHY or MPHY: |
| @li 1 - SPHY |
| @li 0 - MPHY */ |
| |
| unsigned int rxOctet:1; /**< [29] Utopia Receive cell transfer protocol. Used to set the Utopia |
| cell transfer protocol to Octet-level handshaking. Note this is only |
| applicable in SPHY mode. |
| @li 1 - Octet-handshaking enabled |
| @li 0 - Cell-handshaking enabled */ |
| |
| unsigned int rxParity:1; /**< [28] Utopia Receive Parity Checking enable. |
| @li 1 - Parity checking enabled |
| @li 0 - Parity checking disabled */ |
| |
| unsigned int rxEvenParity:1;/**< [27] Utopia Receive Parity Mode |
| @li 1 - Check for Even Parity |
| @li 0 - Check for Odd Parity.*/ |
| |
| unsigned int rxHEC:1; /**< [26] RxHEC Header Error Check Mode. Enables/disables cell header |
| error checking on the received cell header. |
| @li 1 - HEC checking enabled |
| @li 0 - HEC checking disabled */ |
| |
| unsigned int rxCOSET:1; /**< [25] If enabled the HEC is Exclusive-OR'ed with the value 0x55 |
| before being tested with the received HEC. |
| @li 1 - Enable HEC ExOR with value 0x55. |
| @li 0 - Use generated HEC value.*/ |
| |
| unsigned int rxHECpass:1; /**< [24] Specifies if the incoming cell HEC byte should be transferred |
| after optional processing to the NPE2 Coprocessor Bus Interface or |
| if it should be discarded. |
| @li 1 - HEC maintained 53-byte/UDC cell sent to NPE2. |
| @li 0 - HEC discarded 52-byte/UDC cell sent to NPE2 coprocessor.*/ |
| |
| unsigned int reserved_1:1; /**< [23] These bits are always 0 */ |
| |
| unsigned int rxCellSize:7; /**< [22:16] Receive cell size. Configures the receive cell size. |
| Values between 52-64 are valid */ |
| |
| unsigned int rxHashEnbGFC:1; /**< [15] Specifies if the VPI field [11:8]/GFC field should be |
| included in the Hash data input or if the bits should be padded |
| with 1'b0. |
| @li 1 - VPI [11:8]/GFC field valid and used in Hash residue calculation. |
| @li 0 - VPI [11:8]/GFC field padded with 1'b0 */ |
| |
| unsigned int rxPreHash:1; /**< [14] Enable Pre-hash value generation. Specifies if the |
| incoming cell data should be pre-hashed to allow VPI/VCI header look-up |
| in a hash table. |
| @li 1 - Pre-hashing enabled |
| @li 0 - Pre-hashing disabled */ |
| |
| unsigned int reserved_2:1; /**< [13] These bits are always 0 */ |
| |
| unsigned int rxAddrRange:5; /**< [12:8] In ATM master, MPHY mode, |
| * this register specifies the upper |
| * limit of the PHY polling logical range. The number of active PHYs are |
| * RxAddrRange + 1. |
| */ |
| unsigned int reserved_3:3; /**< [7-5] These bits are always 0 .*/ |
| unsigned int rxPHYAddr:5; /**< [4:0] When configured as a slave in an MPHY system this register |
| * specifies the physical address of the PHY. |
| */ |
| } utRxConfig; /**< Rx config Utopia register */ |
| |
| /** |
| * @ingroup IxAtmdAccUtopiaCtrlAPI |
| * @struct UtRxStatsConfig_ |
| * @brief Utopia Rx stats config Register |
| */ |
| struct UtRxStatsConfig_ |
| { |
| |
| unsigned int vpi:12; /**< [31:20] ATM VPI VPI [11:0] OR GFC [3:0] and VPI [7:0] |
| @li Note: if VCStatsRxGFC is set to 0 the GFC field is ignored in test. */ |
| |
| unsigned int vci:16; /**< [19:4] VCI [15:0] or PHY Address [4] */ |
| |
| unsigned int pti:3; /**< [3:1] PTI [2:0] or or PHY Address [3:1] |
| @li Note: if VCStatsRxPTI is set to 0 the PTI field is ignored in test. |
| @li Note: if VCStatsRxEnb is set to 0 only the PHY port address is used |
| for statistics gathering.. */ |
| |
| unsigned int clp:1; /**< [0] CLP [0] or PHY Address [0] |
| @li Note: if VCStatsRxCLP is set to 0 the CLP field is ignored in test. |
| @li Note: if VCStatsRxEnb is set to 0 only the PHY port address is used |
| for statistics gathering.. */ |
| } utRxStatsConfig; /**< Rx stats config Utopia register */ |
| |
| /** |
| * @ingroup IxAtmdAccUtopiaCtrlAPI |
| * @struct UtRxDefineIdle_ |
| * @brief Utopia Rx idle cells config Register |
| */ |
| struct UtRxDefineIdle_ |
| { |
| |
| unsigned int vpi:12; /**< [31:20] ATM VPI [11:0] OR GFC [3:0] and VPI [7:0] |
| @li Note: if VCIdleRxGFC is set to 0 the GFC field is ignored in test. */ |
| |
| unsigned int vci:16; /**< [19:4] ATM VCI [15:0] */ |
| |
| unsigned int pti:3; /**< [3:1] ATM PTI PTI [2:0] |
| @li Note: if VCIdleRxPTI is set to 0 the PTI field is ignored in test.*/ |
| |
| unsigned int clp:1; /**< [0] ATM CLP [0] |
| @li Note: if VCIdleRxCLP is set to 0 the CLP field is ignored in test.*/ |
| } utRxDefineIdle; /**< Rx idle cell config Utopia register */ |
| |
| /** |
| * @ingroup IxAtmdAccUtopiaCtrlAPI |
| * @struct UtRxEnableFields_ |
| * @brief Utopia Rx enable Register |
| */ |
| struct UtRxEnableFields_ |
| { |
| |
| unsigned int defineRxIdleGFC:1;/**< [31] This register is used to include or exclude the GFC |
| field of the ATM header when testing for Idle cells. |
| @li 1 - GFC field is valid. |
| @li 0 - GFC field ignored.*/ |
| |
| unsigned int defineRxIdlePTI:1;/**< [30] This register is used to include or exclude the PTI |
| field of the ATM header when testing for Idle cells. |
| @li 1 - PTI field is valid. |
| @li 0 - PTI field ignored.*/ |
| |
| unsigned int defineRxIdleCLP:1;/**< [29] This register is used to include or exclude the CLP |
| field of the ATM header when testing for Idle cells. |
| @li 1 - CLP field is valid. |
| @li 0 - CLP field ignored.*/ |
| |
| unsigned int phyStatsRxEnb:1;/**< [28] This register is used to enable or disable ATM statistics |
| gathering based on the specified PHY address as defined in RxStatsConfig |
| register. |
| @li 1 - Enable statistics for specified receive PHY address. |
| @li 0 - Disable statistics for specified receive PHY address.*/ |
| |
| unsigned int vcStatsRxEnb:1;/**< [27] This register is used to enable or disable ATM statistics |
| gathering based on a specific VPI/VCI address. |
| @li 1 - Enable statistics for specified VPI/VCI address. |
| @li 0 - Disable statistics for specified VPI/VCI address.*/ |
| |
| unsigned int vcStatsRxGFC:1;/**< [26] This register is used to include or exclude the GFC field |
| of the ATM header when ATM VPI/VCI statistics are enabled. GFC is only |
| available at the UNI and uses the first 4-bits of the VPI field. |
| @li 1 - GFC field is valid. |
| @li 0 - GFC field ignored. */ |
| |
| unsigned int vcStatsRxPTI:1;/**< [25] This register is used to include or exclude the PTI field |
| of the ATM header when ATM VPI/VCI statistics are enabled. |
| @li 1 - PTI field is valid. |
| @li 0 - PTI field ignored.*/ |
| |
| unsigned int vcStatsRxCLP:1;/**< [24] This register is used to include or exclude the CLP field |
| of the ATM header when ATM VPI/VCI statistics are enabled. |
| @li 1 - CLP field is valid. |
| @li 0 - CLP field ignored. */ |
| |
| unsigned int discardHecErr:1;/**< [23] Discard cells with an invalid HEC. |
| @li 1 - Discard cells with HEC errors |
| @li 0 - Cells with HEC errors are passed */ |
| |
| unsigned int discardParErr:1;/**< [22] Discard cells containing parity errors. |
| @li 1 - Discard cells with parity errors |
| @li 0 - Cells with parity errors are passed */ |
| |
| unsigned int discardIdle:1; /**< [21] Discard Idle Cells based on DefineIdle register values |
| @li 1 - Discard IDLE cells |
| @li 0 - IDLE cells passed */ |
| |
| unsigned int enbHecErrCnt:1;/**< [20] Enable Receive HEC Error Count. |
| @li 1 - Enable count of received cells containing HEC errors |
| @li 0 - No count is maintained. */ |
| |
| unsigned int enbParErrCnt:1;/**< [19] Enable Parity Error Count |
| @li 1 - Enable count of received cells containing Parity errors |
| @li 0 - No count is maintained. */ |
| |
| unsigned int enbIdleCellCnt:1;/**< [18] Enable Receive Idle Cell Count. |
| @li 1 - Enable count of Idle cells received. |
| @li 0 - No count is maintained.*/ |
| |
| unsigned int enbSizeErrCnt:1;/**< [17] Enable Receive Size Error Count. |
| @li 1 - Enable count of received cells of incorrect size |
| @li 0 - No count is maintained. */ |
| |
| unsigned int enbRxCellCnt:1;/**< [16] Enable Receive Valid Cell Count of non-idle/non-error cells. |
| @li 1 - Enable count of valid cells received - non-idle/non-error |
| @li 0 - No count is maintained. */ |
| |
| unsigned int reserved_1:3; /**< [15:13] These bits are always 0 */ |
| |
| unsigned int rxCellOvrInt:1; /**< [12] Enable CBI Utopia Receive Status Condition if the RxCellCount |
| register overflows. |
| @li 1 - CBI Receive Status asserted. |
| @li 0 - No CBI Receive Status asserted.*/ |
| |
| unsigned int invalidHecOvrInt:1; /**< [11] Enable CBI Receive Status Condition if the InvalidHecCount |
| register overflows. |
| @li 1 - CBI Receive Condition asserted. |
| @li 0 - No CBI Receive Condition asserted */ |
| |
| unsigned int invalidParOvrInt:1; /**< [10] Enable CBI Receive Status Condition if the InvalidParCount |
| register overflows |
| @li 1 - CBI Receive Condition asserted. |
| @li 0 - No CBI Receive Condition asserted */ |
| |
| unsigned int invalidSizeOvrInt:1; /**< [9] Enable CBI Receive Status Condition if the InvalidSizeCount |
| register overflows. |
| @li 1 - CBI Receive Status Condition asserted. |
| @li 0 - No CBI Receive Status asserted */ |
| |
| unsigned int rxIdleOvrInt:1; /**< [8] Enable CBI Receive Status Condition if the RxIdleCount overflows. |
| @li 1 - CBI Receive Condition asserted. |
| @li 0 - No CBI Receive Condition asserted */ |
| |
| unsigned int reserved_2:3; /**< [7:5] These bits are always 0 */ |
| |
| unsigned int rxAddrMask:5; /**< [4:0] This register is used as a mask to allow the user to increase |
| the PHY receive address range. The register should be programmed with |
| the address-range limit, i.e. if set to 0x3 the address range increases |
| to a maximum of 4 addresses. */ |
| } utRxEnableFields; /**< Rx enable Utopia register */ |
| |
| /** |
| * @ingroup IxAtmdAccUtopiaCtrlAPI |
| * @struct UtRxTransTable0_ |
| * @brief Utopia Rx translation table Register |
| */ |
| struct UtRxTransTable0_ |
| { |
| |
| unsigned int phy0:5; /**< [31-27] Rx Mapping value of logical phy 0 */ |
| |
| unsigned int phy1:5; /**< [26-22] Rx Mapping value of logical phy 1 */ |
| |
| unsigned int phy2:5; /**< [21-17] Rx Mapping value of logical phy 2 */ |
| |
| unsigned int reserved_1:1; /**< [16] These bits are always 0 */ |
| |
| unsigned int phy3:5; /**< [15-11] Rx Mapping value of logical phy 3 */ |
| |
| unsigned int phy4:5; /**< [10-6] Rx Mapping value of logical phy 4 */ |
| |
| unsigned int phy5:5; /**< [5-1] Rx Mapping value of logical phy 5 */ |
| |
| unsigned int reserved_2:1; /**< [0] These bits are always 0 */ |
| } |
| |
| utRxTransTable0; /**< Rx translation table */ |
| |
| /** |
| * @ingroup IxAtmdAccUtopiaCtrlAPI |
| * @struct UtRxTransTable1_ |
| * @brief Utopia Rx translation table Register |
| */ |
| struct UtRxTransTable1_ |
| { |
| |
| unsigned int phy6:5; /**< [31-27] Rx Mapping value of logical phy 6 */ |
| |
| unsigned int phy7:5; /**< [26-22] Rx Mapping value of logical phy 7 */ |
| |
| unsigned int phy8:5; /**< [21-17] Rx Mapping value of logical phy 8 */ |
| |
| unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ |
| |
| unsigned int phy9:5; /**< [15-11] Rx Mapping value of logical phy 3 */ |
| |
| unsigned int phy10:5; /**< [10-6] Rx Mapping value of logical phy 4 */ |
| |
| unsigned int phy11:5; /**< [5-1] Rx Mapping value of logical phy 5 */ |
| |
| unsigned int reserved_2:1; /**< [0] These bits are always 0 */ |
| } |
| |
| utRxTransTable1; /**< Rx translation table */ |
| |
| /** |
| * @ingroup IxAtmdAccUtopiaCtrlAPI |
| * @struct UtRxTransTable2_ |
| * @brief Utopia Rx translation table Register |
| */ |
| struct UtRxTransTable2_ |
| { |
| |
| unsigned int phy12:5; /**< [31-27] Rx Mapping value of logical phy 6 */ |
| |
| unsigned int phy13:5; /**< [26-22] Rx Mapping value of logical phy 7 */ |
| |
| unsigned int phy14:5; /**< [21-17] Rx Mapping value of logical phy 8 */ |
| |
| unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ |
| |
| unsigned int phy15:5; /**< [15-11] Rx Mapping value of logical phy 3 */ |
| |
| unsigned int phy16:5; /**< [10-6] Rx Mapping value of logical phy 4 */ |
| |
| unsigned int phy17:5; /**< [5-1] Rx Mapping value of logical phy 5 */ |
| |
| unsigned int reserved_2:1; /**< [0] These bits are always 0 */ |
| } utRxTransTable2; /**< Rx translation table */ |
| |
| /** |
| * @ingroup IxAtmdAccUtopiaCtrlAPI |
| * @struct UtRxTransTable3_ |
| * @brief Utopia Rx translation table Register |
| */ |
| struct UtRxTransTable3_ |
| { |
| |
| unsigned int phy18:5; /**< [31-27] Rx Mapping value of logical phy 6 */ |
| |
| unsigned int phy19:5; /**< [26-22] Rx Mapping value of logical phy 7 */ |
| |
| unsigned int phy20:5; /**< [21-17] Rx Mapping value of logical phy 8 */ |
| |
| unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ |
| |
| unsigned int phy21:5; /**< [15-11] Rx Mapping value of logical phy 3 */ |
| |
| unsigned int phy22:5; /**< [10-6] Rx Mapping value of logical phy 4 */ |
| |
| unsigned int phy23:5; /**< [5-1] Rx Mapping value of logical phy 5 */ |
| |
| unsigned int reserved_2:1; /**< [0] These bits are always 0 */ |
| } utRxTransTable3; /**< Rx translation table */ |
| |
| /** |
| * @ingroup IxAtmdAccUtopiaCtrlAPI |
| * @struct UtRxTransTable4_ |
| * @brief Utopia Rx translation table Register |
| */ |
| struct UtRxTransTable4_ |
| { |
| |
| unsigned int phy24:5; /**< [31-27] Rx Mapping value of logical phy 6 */ |
| |
| unsigned int phy25:5; /**< [26-22] Rx Mapping value of logical phy 7 */ |
| |
| unsigned int phy26:5; /**< [21-17] Rx Mapping value of logical phy 8 */ |
| |
| unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */ |
| |
| unsigned int phy27:5; /**< [15-11] Rx Mapping value of logical phy 3 */ |
| |
| unsigned int phy28:5; /**< [10-6] Rx Mapping value of logical phy 4 */ |
| |
| unsigned int phy29:5; /**< [5-1] Rx Mapping value of logical phy 5 */ |
| |
| unsigned int reserved_2:1; /**< [0] These bits are always 0 */ |
| } utRxTransTable4; /**< Rx translation table */ |
| |
| /** |
| * @ingroup IxAtmdAccUtopiaCtrlAPI |
| * @struct UtRxTransTable5_ |
| * @brief Utopia Rx translation table Register |
| */ |
| struct UtRxTransTable5_ |
| { |
| |
| unsigned int phy30:5; /**< [31-27] Rx Mapping value of logical phy 6 */ |
| |
| unsigned int reserved_1:27; /**< [26-0] These bits are always 0 */ |
| |
| } utRxTransTable5; /**< Rx translation table */ |
| |
| /** |
| * @ingroup IxAtmdAccUtopiaCtrlAPI |
| * @struct UtSysConfig_ |
| * @brief NPE setup Register |
| */ |
| struct UtSysConfig_ |
| { |
| |
| unsigned int reserved_1:2; /**< [31-30] These bits are always 0 */ |
| unsigned int txEnbFSM:1; /**< [29] Enables the operation ofthe Utopia Transmit FSM |
| * @li 1 - FSM enabled |
| * @li 0 - FSM inactive |
| */ |
| unsigned int rxEnbFSM:1; /**< [28] Enables the operation ofthe Utopia Revieve FSM |
| * @li 1 - FSM enabled |
| * @li 0 - FSM inactive |
| */ |
| unsigned int disablePins:1; /**< [27] Disable Utopia interface I/O pins forcing the signals to an |
| * inactive state. Note that this bit is set on reset and must be |
| * de-asserted |
| * @li 0 - Normal data transfer |
| * @li 1 - Utopia interface pins are forced inactive |
| */ |
| unsigned int tstLoop:1; /**< [26] Test Loop Back Enable. |
| * @li Note: For loop back to function RxMode and Tx Mode must both be set |
| * to single PHY mode. |
| * @li 0 - Loop back |
| * @li 1 - Normal operating mode |
| */ |
| |
| unsigned int txReset:1; /**< [25] Resets the Utopia Coprocessor transmit module to a known state. |
| * @li Note: All transmit configuration and status registers will be reset |
| * to their reset values. |
| * @li 0 - Normal operating mode |
| * @li 1 - Reset transmit modules |
| */ |
| |
| unsigned int rxReset:1; /**< [24] Resets the Utopia Coprocessor receive module to a known state. |
| * @li Note: All receive configuration and status registers will be reset |
| * to their reset values. |
| * @li 0 - Normal operating mode |
| * @li 1 - Reset receive modules |
| */ |
| |
| unsigned int reserved_2:24; /**< [23-0] These bits are always 0 */ |
| } utSysConfig; /**< NPE debug config */ |
| |
| } |
| IxAtmdAccUtopiaConfig; |
| |
| /** |
| * |
| * @brief Utopia status |
| * |
| * This structure is used to set/get the Utopia status parameters |
| * @li contains debug cell counters, to be accessed during a read operation |
| * |
| * @note - the exact description of all parameters is done in the Utopia reference |
| * documents. |
| * |
| */ |
| typedef struct |
| { |
| |
| unsigned int utTxCellCount; /**< count of cells transmitted */ |
| |
| unsigned int utTxIdleCellCount; /**< count of idle cells transmitted */ |
| |
| /** |
| * @ingroup IxAtmdAccUtopiaCtrlAPI |
| * @struct UtTxCellConditionStatus_ |
| * @brief Utopia Tx Status Register |
| */ |
| struct UtTxCellConditionStatus_ |
| { |
| |
| unsigned int reserved_1:2; /**< [31:30] These bits are always 0 */ |
| unsigned int txFIFO2Underflow:1; /**< [29] This bit is set if 64-byte |
| * Transmit FIFO2 indicates a FIFO underflow |
| * error condition. |
| */ |
| unsigned int txFIFO1Underflow:1; /**< [28] This bit is set if |
| * 64-byte Transmit FIFO1 indicates a FIFO |
| * underflow error condition. |
| */ |
| unsigned int txFIFO2Overflow:1; /**< [27] This bit is set if 64-byte |
| * Transmit FIFO2 indicates a FIFO overflow |
| * error condition. |
| */ |
| unsigned int txFIFO1Overflow:1; /**< [26] This bit is set if 64-byte |
| * Transmit FIFO1 indicates a FIFO overflow |
| * error condition. |
| */ |
| unsigned int txIdleCellCountOvr:1; /**< [25] This bit is set if the |
| * TxIdleCellCount register overflows. |
| */ |
| unsigned int txCellCountOvr:1; /**< [24] This bit is set if the |
| * TxCellCount register overflows |
| */ |
| unsigned int reserved_2:24; /**< [23:0] These bits are always 0 */ |
| } utTxCellConditionStatus; /**< Tx cells condition status */ |
| |
| unsigned int utRxCellCount; /**< count of cell received */ |
| unsigned int utRxIdleCellCount; /**< count of idle cell received */ |
| unsigned int utRxInvalidHECount; /**< count of invalid cell |
| * received because of HEC errors |
| */ |
| unsigned int utRxInvalidParCount; /**< count of invalid cell received |
| * because of parity errors |
| */ |
| unsigned int utRxInvalidSizeCount; /**< count of invalid cell |
| * received because of cell |
| * size errors |
| */ |
| |
| /** |
| * @ingroup IxAtmdAccUtopiaCtrlAPI |
| * @struct UtRxCellConditionStatus_ |
| * @brief Utopia Rx Status Register |
| */ |
| struct UtRxCellConditionStatus_ |
| { |
| |
| unsigned int reserved_1:3; /**< [31:29] These bits are always 0.*/ |
| unsigned int rxCellCountOvr:1; /**< [28] This bit is set if the RxCellCount register overflows. */ |
| unsigned int invalidHecCountOvr:1; /**< [27] This bit is set if the InvalidHecCount register overflows.*/ |
| unsigned int invalidParCountOvr:1; /**< [26] This bit is set if the InvalidParCount register overflows.*/ |
| unsigned int invalidSizeCountOvr:1; /**< [25] This bit is set if the InvalidSizeCount register overflows.*/ |
| unsigned int rxIdleCountOvr:1; /**< [24] This bit is set if the RxIdleCount register overflows.*/ |
| unsigned int reserved_2:4; /**< [23:20] These bits are always 0 */ |
| unsigned int rxFIFO2Underflow:1; /**< [19] This bit is set if 64-byte Receive FIFO2 |
| * indicates a FIFO underflow error condition. |
| */ |
| unsigned int rxFIFO1Underflow:1; /**< [18] This bit is set if 64-byte Receive |
| * FIFO1 indicates a FIFO underflow error condition |
| . */ |
| unsigned int rxFIFO2Overflow:1; /**< [17] This bit is set if 64-byte Receive FIFO2 |
| * indicates a FIFO overflow error condition. |
| */ |
| unsigned int rxFIFO1Overflow:1; /**< [16] This bit is set if 64-byte Receive FIFO1 |
| * indicates a FIFO overflow error condition. |
| */ |
| unsigned int reserved_3:16; /**< [15:0] These bits are always 0. */ |
| } utRxCellConditionStatus; /**< Rx cells condition status */ |
| |
| } IxAtmdAccUtopiaStatus; |
| |
| /** |
| * @} defgroup IxAtmdAccUtopiaCtrlAPI |
| */ |
| |
| /** |
| * |
| * @ingroup IxAtmdAccCtrlAPI |
| * |
| * @fn ixAtmdAccUtopiaConfigSet (const IxAtmdAccUtopiaConfig * |
| ixAtmdAccUtopiaConfigPtr) |
| * |
| * @brief Send the configuration structure to the Utopia interface |
| * |
| * This function downloads the @a IxAtmdAccUtopiaConfig structure to |
| * the Utopia and has the following effects |
| * @li setup the Utopia interface |
| * @li initialise the NPE |
| * @li reset the Utopia cell counters and status registers to known values |
| * |
| * This action has to be done once at initialisation. A lock is preventing |
| * the concurrent use of @a ixAtmdAccUtopiaStatusGet() and |
| * @A ixAtmdAccUtopiaConfigSet() |
| * |
| * @param *ixAtmdAccNPEConfigPtr @ref IxAtmdAccUtopiaConfig [in] - pointer to a structure to download to |
| * Utopia. This parameter cannot be a null pointer. |
| * |
| * @return @li IX_SUCCESS successful download |
| * @return @li IX_FAIL error in the parameters, or configuration is not |
| * complete or failed |
| * |
| * @sa ixAtmdAccUtopiaStatusGet |
| * |
| */ |
| PUBLIC IX_STATUS ixAtmdAccUtopiaConfigSet (const IxAtmdAccUtopiaConfig * |
| ixAtmdAccUtopiaConfigPtr); |
| |
| /** |
| * |
| * @ingroup IxAtmdAccCtrlAPI |
| * |
| * @fn ixAtmdAccUtopiaStatusGet (IxAtmdAccUtopiaStatus * |
| ixAtmdAccUtopiaStatus) |
| * |
| * @brief Get the Utopia interface configuration. |
| * |
| * This function reads the Utopia registers and the Cell counts |
| * and fills the @a IxAtmdAccUtopiaStatus structure |
| * |
| * A lock is preventing the concurrent |
| * use of @a ixAtmdAccUtopiaStatusGet() and @A ixAtmdAccUtopiaConfigSet() |
| * |
| * @param ixAtmdAccUtopiaStatus @ref IxAtmdAccUtopiaStatus [out] - pointer to structure to be updated from internal |
| * hardware counters. This parameter cannot be a NULL pointer. |
| * |
| * @return @li IX_SUCCESS successful read |
| * @return @li IX_FAIL error in the parameters null pointer, or |
| * configuration read is not complete or failed |
| * |
| * @sa ixAtmdAccUtopiaConfigSet |
| * |
| */ |
| PUBLIC IX_STATUS ixAtmdAccUtopiaStatusGet (IxAtmdAccUtopiaStatus * |
| ixAtmdAccUtopiaStatus); |
| |
| /** |
| * |
| * @ingroup IxAtmdAcc |
| * |
| * @fn ixAtmdAccPortEnable (IxAtmLogicalPort port) |
| * |
| * @brief enable a PHY logical port |
| * |
| * This function enables the transmission over one port. It should be |
| * called before accessing any resource from this port and before the |
| * establishment of a VC. |
| * |
| * When a port is enabled, the cell transmission to the Utopia interface |
| * is started. If there is no traffic already running, idle cells are |
| * sent over the interface. |
| * |
| * This function can be called multiple times. |
| * |
| * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] |
| * |
| * @return @li IX_SUCCESS enable is complete |
| * @return @li IX_ATMDACC_WARNING port already enabled |
| * @return @li IX_FAIL enable failed, wrong parameter, or cannot |
| * initialise this port (the port is maybe already in use, |
| * or there is a hardware issue) |
| * |
| * @note - This function needs internal locks and should not be |
| * called from an interrupt context |
| * |
| * @sa ixAtmdAccPortDisable |
| * |
| */ |
| PUBLIC IX_STATUS ixAtmdAccPortEnable (IxAtmLogicalPort port); |
| |
| /** |
| * |
| * @ingroup IxAtmdAccCtrlAPI |
| * |
| * @fn ixAtmdAccPortDisable (IxAtmLogicalPort port) |
| * |
| * @brief disable a PHY logical port |
| * |
| * This function disable the transmission over one port. |
| * |
| * When a port is disabled, the cell transmission to the Utopia interface |
| * is stopped. |
| * |
| * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] |
| * |
| * @return @li IX_SUCCESS disable is complete |
| * @return @li IX_ATMDACC_WARNING port already disabled |
| * @return @li IX_FAIL disable failed, wrong parameter . |
| * |
| * @note - This function needs internal locks and should not be called |
| * from an interrupt context |
| * |
| * @note - The response from hardware is done through the txDone mechanism |
| * to ensure the synchrnisation with tx resources. Therefore, the |
| * txDone mechanism needs to be serviced to make a PortDisable complete. |
| * |
| * @sa ixAtmdAccPortEnable |
| * @sa ixAtmdAccPortDisableComplete |
| * @sa ixAtmdAccTxDoneDispatch |
| * |
| */ |
| PUBLIC IX_STATUS ixAtmdAccPortDisable (IxAtmLogicalPort port); |
| |
| /** |
| * |
| * @ingroup IxAtmdAccCtrlAPI |
| * |
| * @fn ixAtmdAccPortDisableComplete (IxAtmLogicalPort port) |
| * |
| * @brief disable a PHY logical port |
| * |
| * This function indicates if the port disable for a port has completed. This |
| * function will return true if the port has never been enabled. |
| * |
| * @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1] |
| * |
| * @return @li true disable is complete |
| * @return @li false disable failed, wrong parameter . |
| * |
| * @note - This function needs internal locks and should not be called |
| * from an interrupt context |
| * |
| * @sa ixAtmdAccPortEnable |
| * @sa ixAtmdAccPortDisable |
| * |
| */ |
| PUBLIC BOOL ixAtmdAccPortDisableComplete (IxAtmLogicalPort port); |
| |
| #endif /* IXATMDACCCTRL_H */ |
| |
| /** |
| * @} defgroup IxAtmdAccCtrlAPI |
| */ |
| |
| |