| # |
| # (C) Copyright 2000, 2001, 2002 |
| # Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| # |
| # See file CREDITS for list of people who contributed to this |
| # project. |
| # |
| # This program is free software; you can redistribute it and/or |
| # modify it under the terms of the GNU General Public License as |
| # published by the Free Software Foundation; either version 2 of |
| # the License, or (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software |
| # Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| # MA 02111-1307 USA |
| # |
| |
| HOSTARCH := $(shell uname -m | \ |
| sed -e s/i.86/i386/ \ |
| -e s/sun4u/sparc64/ \ |
| -e s/arm.*/arm/ \ |
| -e s/sa110/arm/ \ |
| -e s/powerpc/ppc/ \ |
| -e s/macppc/ppc/) |
| |
| HOSTOS := $(shell uname -s | tr A-Z a-z | \ |
| sed -e 's/\(cygwin\).*/cygwin/') |
| |
| export HOSTARCH |
| |
| # Deal with colliding definitions from tcsh etc. |
| VENDOR= |
| |
| ######################################################################### |
| |
| TOPDIR := $(shell if [ "$$PWD" != "" ]; then echo $$PWD; else pwd; fi) |
| export TOPDIR |
| |
| ifeq (include/config.mk,$(wildcard include/config.mk)) |
| # load ARCH, BOARD, and CPU configuration |
| include include/config.mk |
| export ARCH CPU BOARD VENDOR |
| # load other configuration |
| include $(TOPDIR)/config.mk |
| |
| ifndef CROSS_COMPILE |
| ifeq ($(HOSTARCH),ppc) |
| CROSS_COMPILE = |
| else |
| ifeq ($(ARCH),ppc) |
| CROSS_COMPILE = ppc_8xx- |
| endif |
| ifeq ($(ARCH),arm) |
| CROSS_COMPILE = arm-linux- |
| endif |
| ifeq ($(ARCH),i386) |
| ifeq ($(HOSTARCH),i386) |
| CROSS_COMPILE = |
| else |
| CROSS_COMPILE = i386-linux- |
| endif |
| endif |
| ifeq ($(ARCH),mips) |
| CROSS_COMPILE = mips_4KC- |
| endif |
| endif |
| endif |
| |
| export CROSS_COMPILE |
| |
| # The "tools" are needed early, so put this first |
| SUBDIRS = tools \ |
| lib_generic \ |
| lib_$(ARCH) \ |
| cpu/$(CPU) \ |
| board/$(BOARDDIR) \ |
| common \ |
| disk \ |
| fs \ |
| net \ |
| rtc \ |
| dtt \ |
| drivers \ |
| post \ |
| post/cpu \ |
| examples |
| |
| ######################################################################### |
| # U-Boot objects....order is important (i.e. start must be first) |
| |
| OBJS = cpu/$(CPU)/start.o |
| ifeq ($(CPU),i386) |
| OBJS += cpu/$(CPU)/start16.o |
| OBJS += cpu/$(CPU)/reset.o |
| endif |
| ifeq ($(CPU),ppc4xx) |
| OBJS += cpu/$(CPU)/resetvec.o |
| endif |
| |
| LIBS = board/$(BOARDDIR)/lib$(BOARD).a |
| LIBS += cpu/$(CPU)/lib$(CPU).a |
| LIBS += lib_$(ARCH)/lib$(ARCH).a |
| LIBS += fs/jffs2/libjffs2.a fs/fdos/libfdos.a fs/fat/libfat.a |
| LIBS += net/libnet.a |
| LIBS += disk/libdisk.a |
| LIBS += rtc/librtc.a |
| LIBS += dtt/libdtt.a |
| LIBS += drivers/libdrivers.a |
| LIBS += post/libpost.a post/cpu/libcpu.a |
| LIBS += common/libcommon.a |
| LIBS += lib_generic/libgeneric.a |
| |
| ######################################################################### |
| |
| all: u-boot.srec u-boot.bin System.map |
| |
| install: all |
| -cp u-boot.bin /tftpboot/u-boot.bin |
| -cp u-boot.bin /net/denx/tftpboot/u-boot.bin |
| |
| u-boot.srec: u-boot |
| $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ |
| |
| u-boot.bin: u-boot |
| $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ |
| |
| u-boot.dis: u-boot |
| $(OBJDUMP) -d $< > $@ |
| |
| u-boot: depend subdirs $(OBJS) $(LIBS) $(LDSCRIPT) |
| UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\ |
| $(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \ |
| --start-group $(LIBS) --end-group \ |
| -Map u-boot.map -o u-boot |
| |
| subdirs: |
| @for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir || exit 1 ; done |
| |
| depend dep: |
| @for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir .depend ; done |
| |
| tags: |
| ctags -w `find $(SUBDIRS) include \ |
| \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)` |
| |
| etags: |
| etags -a `find $(SUBDIRS) include \ |
| \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)` |
| |
| System.map: u-boot |
| @$(NM) $< | \ |
| grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ |
| sort > System.map |
| |
| ######################################################################### |
| else |
| all install u-boot u-boot.srec depend dep: |
| @echo "System not configured - see README" >&2 |
| @ exit 1 |
| endif |
| |
| ######################################################################### |
| |
| unconfig: |
| rm -f include/config.h include/config.mk |
| |
| #======================================================================== |
| # PowerPC |
| #======================================================================== |
| |
| ######################################################################### |
| ## MPC5xx Systems |
| ######################################################################### |
| |
| cmi_mpc5xx_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc5xx cmi |
| |
| ######################################################################### |
| ## MPC8xx Systems |
| ######################################################################### |
| |
| ADS860_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx fads |
| |
| AMX860_config : unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx amx860 westel |
| |
| c2mon_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx c2mon |
| |
| CCM_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx CCM siemens |
| |
| cogent_mpc8xx_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx cogent |
| |
| ELPT860_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx elpt860 LEOX |
| |
| ESTEEM192E_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx esteem192e |
| |
| ETX094_config : unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx etx094 |
| |
| FADS823_config \ |
| FADS850SAR_config \ |
| FADS860T_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx fads |
| |
| FLAGADM_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx flagadm |
| |
| xtract_GEN860T = $(subst _SC,,$(subst _config,,$1)) |
| |
| GEN860T_SC_config \ |
| GEN860T_config: unconfig |
| @ >include/config.h |
| @[ -z "$(findstring _SC,$@)" ] || \ |
| { echo "#define CONFIG_SC" >>include/config.h ; \ |
| echo "With reduced H/W feature set (SC)..." ; \ |
| } |
| @./mkconfig -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t |
| |
| GENIETV_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx genietv |
| |
| GTH_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx gth |
| |
| hermes_config : unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx hermes |
| |
| IAD210_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx IAD210 siemens |
| |
| xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1)) |
| |
| ICU862_100MHz_config \ |
| ICU862_config: unconfig |
| @ >include/config.h |
| @[ -z "$(findstring _100MHz,$@)" ] || \ |
| { echo "#define CONFIG_100MHz" >>include/config.h ; \ |
| echo "... with 100MHz system clock" ; \ |
| } |
| @./mkconfig -a $(call xtract_ICU862,$@) ppc mpc8xx icu862 |
| |
| IP860_config : unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx ip860 |
| |
| IVML24_256_config \ |
| IVML24_128_config \ |
| IVML24_config: unconfig |
| @ >include/config.h |
| @[ -z "$(findstring IVML24_config,$@)" ] || \ |
| { echo "#define CONFIG_IVML24_16M" >>include/config.h ; \ |
| } |
| @[ -z "$(findstring IVML24_128_config,$@)" ] || \ |
| { echo "#define CONFIG_IVML24_32M" >>include/config.h ; \ |
| } |
| @[ -z "$(findstring IVML24_256_config,$@)" ] || \ |
| { echo "#define CONFIG_IVML24_64M" >>include/config.h ; \ |
| } |
| @./mkconfig -a IVML24 ppc mpc8xx ivm |
| |
| IVMS8_256_config \ |
| IVMS8_128_config \ |
| IVMS8_config: unconfig |
| @ >include/config.h |
| @[ -z "$(findstring IVMS8_config,$@)" ] || \ |
| { echo "#define CONFIG_IVMS8_16M" >>include/config.h ; \ |
| } |
| @[ -z "$(findstring IVMS8_128_config,$@)" ] || \ |
| { echo "#define CONFIG_IVMS8_32M" >>include/config.h ; \ |
| } |
| @[ -z "$(findstring IVMS8_256_config,$@)" ] || \ |
| { echo "#define CONFIG_IVMS8_64M" >>include/config.h ; \ |
| } |
| @./mkconfig -a IVMS8 ppc mpc8xx ivm |
| |
| KUP4K_config : unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx kup4k |
| |
| LANTEC_config : unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx lantec |
| |
| lwmon_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx lwmon |
| |
| MBX_config \ |
| MBX860T_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx mbx8xx |
| |
| MHPC_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx mhpc eltec |
| |
| MVS1_config : unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx mvs1 |
| |
| xtract_NETVIA = $(subst _V2,,$(subst _config,,$1)) |
| |
| NETVIA_V2_config \ |
| NETVIA_config: unconfig |
| @ >include/config.h |
| @[ -z "$(findstring NETVIA_config,$@)" ] || \ |
| { echo "#define CONFIG_NETVIA_VERSION 1" >>include/config.h ; \ |
| echo "... Version 1" ; \ |
| } |
| @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \ |
| { echo "#define CONFIG_NETVIA_VERSION 2" >>include/config.h ; \ |
| echo "... Version 2" ; \ |
| } |
| @./mkconfig -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia |
| |
| NX823_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx nx823 |
| |
| pcu_e_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx pcu_e siemens |
| |
| R360MPI_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx r360mpi |
| |
| RBC823_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx rbc823 |
| |
| RPXClassic_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx RPXClassic |
| |
| RPXlite_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx RPXlite |
| |
| rmu_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx rmu |
| |
| RRvision_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx RRvision |
| |
| RRvision_LCD_config: unconfig |
| @echo "#define CONFIG_LCD" >include/config.h |
| @echo "#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h |
| @./mkconfig -a RRvision ppc mpc8xx RRvision |
| |
| SM850_config : unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx tqm8xx |
| |
| SPD823TS_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx spd8xx |
| |
| svm_sc8xx_config: unconfig |
| @ >include/config.h |
| @./mkconfig $(@:_config=) ppc mpc8xx svm_sc8xx |
| |
| SXNI855T_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx sixnet |
| |
| # EMK MPC8xx based modules |
| TOP860_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8xx top860 emk |
| |
| # Play some tricks for configuration selection |
| # All boards can come with 50 MHz (default), 66MHz, 80MHz or 100 MHz clock, |
| # but only 855 and 860 boards may come with FEC |
| # and 823 boards may have LCD support |
| xtract_8xx = $(subst _66MHz,,$(subst _80MHz,,$(subst _100MHz,,$(subst _LCD,,$(subst _config,,$1))))) |
| |
| FPS850L_config \ |
| FPS860L_config \ |
| NSCU_config \ |
| TQM823L_config \ |
| TQM823L_66MHz_config \ |
| TQM823L_80MHz_config \ |
| TQM823L_LCD_config \ |
| TQM823L_LCD_66MHz_config \ |
| TQM823L_LCD_80MHz_config \ |
| TQM850L_config \ |
| TQM850L_66MHz_config \ |
| TQM850L_80MHz_config \ |
| TQM855L_config \ |
| TQM855L_66MHz_config \ |
| TQM855L_80MHz_config \ |
| TQM860L_config \ |
| TQM860L_66MHz_config \ |
| TQM860L_80MHz_config \ |
| TQM862L_config \ |
| TQM862L_66MHz_config \ |
| TQM862L_80MHz_config \ |
| TQM855M_config \ |
| TQM855M_66MHz_config \ |
| TQM855M_80MHz_config \ |
| TQM860M_config \ |
| TQM860M_66MHz_config \ |
| TQM860M_80MHz_config \ |
| TQM862M_config \ |
| TQM862M_66MHz_config \ |
| TQM862M_80MHz_config \ |
| TQM862M_100MHz_config: unconfig |
| @ >include/config.h |
| @[ -z "$(findstring _66MHz,$@)" ] || \ |
| { echo "#define CONFIG_66MHz" >>include/config.h ; \ |
| echo "... with 66MHz system clock" ; \ |
| } |
| @[ -z "$(findstring _80MHz,$@)" ] || \ |
| { echo "#define CONFIG_80MHz" >>include/config.h ; \ |
| echo "... with 80MHz system clock" ; \ |
| } |
| @[ -z "$(findstring _100MHz,$@)" ] || \ |
| { echo "#define CONFIG_100MHz" >>include/config.h ; \ |
| echo "... with 100MHz system clock" ; \ |
| } |
| @[ -z "$(findstring _LCD,$@)" ] || \ |
| { echo "#define CONFIG_LCD" >>include/config.h ; \ |
| echo "#define CONFIG_NEC_NL6648BC20" >>include/config.h ; \ |
| echo "... with LCD display" ; \ |
| } |
| @./mkconfig -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx |
| |
| TTTech_config: unconfig |
| @echo "#define CONFIG_LCD" >include/config.h |
| @echo "#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h |
| @./mkconfig -a TQM823L ppc mpc8xx tqm8xx |
| |
| v37_config: unconfig |
| @echo "#define CONFIG_LCD" >include/config.h |
| @echo "#define CONFIG_SHARP_LQ084V1DG21" >>include/config.h |
| @./mkconfig $(@:_config=) ppc mpc8xx v37 |
| |
| ######################################################################### |
| ## PPC4xx Systems |
| ######################################################################### |
| |
| ADCIOP_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx adciop esd |
| |
| AR405_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx ar405 esd |
| |
| ASH405_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx ash405 esd |
| |
| BUBINGA405EP_config:unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx bubinga405ep |
| |
| CANBT_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx canbt esd |
| |
| CPCI405_config \ |
| CPCI4052_config \ |
| CPCI405AB_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx cpci405 esd |
| @echo "BOARD_REVISION = $(@:_config=)" >>include/config.mk |
| |
| CPCI440_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx cpci440 esd |
| |
| CPCIISER4_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx cpciiser4 esd |
| |
| CRAYL1_config:unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx L1 cray |
| |
| DASA_SIM_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx dasa_sim esd |
| |
| DU405_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx du405 esd |
| |
| EBONY_config:unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx ebony |
| |
| ERIC_config:unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx eric |
| |
| EXBITGEN_config:unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx exbitgen |
| |
| MIP405_config:unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx mip405 mpl |
| |
| MIP405T_config:unconfig |
| @echo "#define CONFIG_MIP405T" >include/config.h |
| @echo "Enable subset config for MIP405T" |
| @./mkconfig -a MIP405 ppc ppc4xx mip405 mpl |
| |
| ML2_config:unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx ml2 |
| |
| OCRTC_config \ |
| ORSG_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx ocrtc esd |
| |
| PCI405_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx pci405 esd |
| |
| PIP405_config:unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx pip405 mpl |
| |
| PMC405_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx pmc405 esd |
| |
| W7OLMC_config \ |
| W7OLMG_config: unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx w7o |
| |
| WALNUT405_config:unconfig |
| @./mkconfig $(@:_config=) ppc ppc4xx walnut405 |
| |
| ######################################################################### |
| ## MPC824x Systems |
| ######################################################################### |
| xtract_82xx = $(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1))))) |
| |
| A3000_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc824x a3000 |
| |
| BMW_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc824x bmw |
| |
| CPC45_config \ |
| CPC45_ROMBOOT_config: unconfig |
| @./mkconfig $(call xtract_82xx,$@) ppc mpc824x cpc45 |
| @cd ./include ; \ |
| if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ |
| echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ |
| echo "... booting from 8-bit flash" ; \ |
| else \ |
| echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ |
| echo "... booting from 64-bit flash" ; \ |
| fi; \ |
| echo "export CONFIG_BOOT_ROM" >> config.mk; |
| |
| CU824_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc824x cu824 |
| |
| MOUSSE_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc824x mousse |
| |
| MUSENKI_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc824x musenki |
| |
| OXC_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc824x oxc |
| |
| PN62_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc824x pn62 |
| |
| Sandpoint8240_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc824x sandpoint |
| |
| Sandpoint8245_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc824x sandpoint |
| |
| SL8245_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc824x sl8245 |
| |
| utx8245_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc824x utx8245 |
| |
| ######################################################################### |
| ## MPC8260 Systems |
| ######################################################################### |
| |
| cogent_mpc8260_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8260 cogent |
| |
| CPU86_config \ |
| CPU86_ROMBOOT_config: unconfig |
| @./mkconfig $(call xtract_82xx,$@) ppc mpc8260 cpu86 |
| @cd ./include ; \ |
| if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ |
| echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ |
| echo "... booting from 8-bit flash" ; \ |
| else \ |
| echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ |
| echo "... booting from 64-bit flash" ; \ |
| fi; \ |
| echo "export CONFIG_BOOT_ROM" >> config.mk; |
| |
| ep8260_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8260 ep8260 |
| |
| gw8260_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8260 gw8260 |
| |
| hymod_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8260 hymod |
| |
| IPHASE4539_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8260 iphase4539 |
| |
| MPC8260ADS_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8260 mpc8260ads |
| |
| MPC8266ADS_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8260 mpc8266ads |
| |
| PM825_config \ |
| PM825_ROMBOOT_config: unconfig |
| @echo "#define CONFIG_PCI" >include/config.h |
| @./mkconfig -a PM826 ppc mpc8260 pm826 |
| @cd ./include ; \ |
| if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ |
| echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ |
| echo "... booting from 8-bit flash" ; \ |
| else \ |
| echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ |
| echo "... booting from 64-bit flash" ; \ |
| fi; \ |
| echo "export CONFIG_BOOT_ROM" >> config.mk; \ |
| |
| PM826_config \ |
| PM826_ROMBOOT_config: unconfig |
| @./mkconfig $(call xtract_82xx,$@) ppc mpc8260 pm826 |
| @cd ./include ; \ |
| if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ |
| echo "CONFIG_BOOT_ROM = y" >> config.mk ; \ |
| echo "... booting from 8-bit flash" ; \ |
| else \ |
| echo "CONFIG_BOOT_ROM = n" >> config.mk ; \ |
| echo "... booting from 64-bit flash" ; \ |
| fi; \ |
| echo "export CONFIG_BOOT_ROM" >> config.mk; \ |
| |
| ppmc8260_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8260 ppmc8260 |
| |
| RPXsuper_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8260 rpxsuper |
| |
| rsdproto_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8260 rsdproto |
| |
| sacsng_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8260 sacsng |
| |
| sbc8260_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8260 sbc8260 |
| |
| SCM_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8260 SCM siemens |
| |
| TQM8255_config \ |
| TQM8260_config \ |
| TQM8260_L2_config \ |
| TQM8255_266MHz_config \ |
| TQM8260_266MHz_config \ |
| TQM8260_L2_266MHz_config \ |
| TQM8255_300MHz_config \ |
| TQM8260_300MHz_config: unconfig |
| @ >include/config.h |
| @if [ "$(findstring _L2_,$@)" ] ; then \ |
| echo "#define CONFIG_L2_CACHE" >>include/config.h ; \ |
| echo "... with L2 Cache support (60x Bus Mode)" ; \ |
| else \ |
| echo "#undef CONFIG_L2_CACHE" >>include/config.h ; \ |
| echo "... without L2 Cache support" ; \ |
| fi |
| @[ -z "$(findstring _266MHz,$@)" ] || \ |
| { echo "#define CONFIG_266MHz" >>include/config.h ; \ |
| echo "... with 266MHz system clock" ; \ |
| } |
| @[ -z "$(findstring _300MHz,$@)" ] || \ |
| { echo "#define CONFIG_300MHz" >>include/config.h ; \ |
| echo "... with 300MHz system clock" ; \ |
| } |
| @[ -z "$(findstring TQM8255_,$@)" ] || \ |
| { echo "#define CONFIG_MPC8255" >>include/config.h ; } |
| @./mkconfig -a TQM8260 ppc mpc8260 tqm8260 |
| |
| atc_config: unconfig |
| @./mkconfig $(@:_config=) ppc mpc8260 atc |
| |
| ######################################################################### |
| ## 74xx/7xx Systems |
| ######################################################################### |
| |
| AmigaOneG3SE_config: unconfig |
| @./mkconfig $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI |
| |
| EVB64260_config \ |
| EVB64260_750CX_config: unconfig |
| @./mkconfig EVB64260 ppc 74xx_7xx evb64260 |
| |
| ZUMA_config: unconfig |
| @./mkconfig $(@:_config=) ppc 74xx_7xx evb64260 |
| |
| PCIPPC2_config \ |
| PCIPPC6_config: unconfig |
| @./mkconfig $(@:_config=) ppc 74xx_7xx pcippc2 |
| |
| BAB7xx_config: unconfig |
| @./mkconfig $(@:_config=) ppc 74xx_7xx bab7xx eltec |
| |
| ELPPC_config: unconfig |
| @./mkconfig $(@:_config=) ppc 74xx_7xx elppc eltec |
| |
| #======================================================================== |
| # ARM |
| #======================================================================== |
| ######################################################################### |
| ## StrongARM Systems |
| ######################################################################### |
| |
| at91rm9200dk_config : unconfig |
| @./mkconfig $(@:_config=) arm at91rm9200 at91rm9200dk |
| |
| lart_config : unconfig |
| @./mkconfig $(@:_config=) arm sa1100 lart |
| |
| dnp1110_config : unconfig |
| @./mkconfig $(@:_config=) arm sa1100 dnp1110 |
| |
| shannon_config : unconfig |
| @./mkconfig $(@:_config=) arm sa1100 shannon |
| |
| ######################################################################### |
| ## ARM92xT Systems |
| ######################################################################### |
| |
| xtract_trab = $(subst _big_flash,,$(subst _config,,$1)) |
| |
| omap1510inn_config : unconfig |
| @./mkconfig $(@:_config=) arm arm925t omap1510inn |
| |
| smdk2400_config : unconfig |
| @./mkconfig $(@:_config=) arm arm920t smdk2400 |
| |
| smdk2410_config : unconfig |
| @./mkconfig $(@:_config=) arm arm920t smdk2410 |
| |
| trab_config \ |
| trab_big_flash_config: unconfig |
| @ >include/config.h |
| @[ -z "$(findstring _big_flash,$@)" ] || \ |
| { echo "#define CONFIG_BIG_FLASH" >>include/config.h ; \ |
| echo "... with big flash support" ; \ |
| } |
| @./mkconfig -a $(call xtract_trab,$@) arm arm920t trab |
| |
| VCMA9_config : unconfig |
| @./mkconfig $(@:_config=) arm arm920t vcma9 mpl |
| |
| ######################################################################### |
| ## ARM720T Systems |
| ######################################################################### |
| |
| impa7_config : unconfig |
| @./mkconfig $(@:_config=) arm arm720t impa7 |
| |
| ep7312_config : unconfig |
| @./mkconfig $(@:_config=) arm arm720t ep7312 |
| |
| ######################################################################### |
| ## XScale Systems |
| ######################################################################### |
| |
| cradle_config : unconfig |
| @./mkconfig $(@:_config=) arm pxa cradle |
| |
| csb226_config : unconfig |
| @./mkconfig $(@:_config=) arm pxa csb226 |
| |
| innokom_config : unconfig |
| @./mkconfig $(@:_config=) arm pxa innokom |
| |
| lubbock_config : unconfig |
| @./mkconfig $(@:_config=) arm pxa lubbock |
| |
| logodl_config : unconfig |
| @./mkconfig $(@:_config=) arm pxa logodl |
| |
| wepep250_config : unconfig |
| @./mkconfig $(@:_config=) arm pxa wepep250 |
| |
| #======================================================================== |
| # i386 |
| #======================================================================== |
| ######################################################################### |
| ## AMD SC520 CDP |
| ######################################################################### |
| sc520_cdp_config : unconfig |
| @./mkconfig $(@:_config=) i386 i386 sc520_cdp |
| |
| sc520_spunk_config : unconfig |
| @./mkconfig $(@:_config=) i386 i386 sc520_spunk |
| |
| sc520_spunk_rel_config : unconfig |
| @./mkconfig $(@:_config=) i386 i386 sc520_spunk |
| |
| #======================================================================== |
| # MIPS |
| #======================================================================== |
| ######################################################################### |
| ## MIPS32 4Kc |
| ######################################################################### |
| |
| incaip_config : unconfig |
| @./mkconfig $(@:_config=) mips mips incaip |
| |
| purple_config : unconfig |
| @./mkconfig $(@:_config=) mips mips purple |
| |
| ######################################################################### |
| ######################################################################### |
| |
| clean: |
| find . -type f \ |
| \( -name 'core' -o -name '*.bak' -o -name '*~' \ |
| -o -name '*.o' -o -name '*.a' \) -print \ |
| | xargs rm -f |
| rm -f examples/hello_world examples/timer \ |
| examples/eepro100_eeprom examples/sched \ |
| examples/mem_to_mem_idma2intr examples/82559_eeprom |
| |
| rm -f tools/img2srec tools/mkimage tools/envcrc tools/gen_eth_addr |
| rm -f tools/easylogo/easylogo tools/bmp_logo |
| rm -f tools/gdb/astest tools/gdb/gdbcont tools/gdb/gdbsend |
| rm -f tools/env/fw_printenv tools/env/fw_setenv |
| rm -f board/cray/L1/bootscript.c board/cray/L1/bootscript.image |
| |
| clobber: clean |
| find . -type f \ |
| \( -name .depend -o -name '*.srec' -o -name '*.bin' \) \ |
| -print \ |
| | xargs rm -f |
| rm -f $(OBJS) *.bak tags TAGS |
| rm -fr *.*~ |
| rm -f u-boot u-boot.bin u-boot.srec u-boot.map System.map |
| rm -f tools/crc32.c tools/environment.c tools/env/crc32.c |
| rm -f tools/inca-swap-bytes cpu/mpc824x/bedbug_603e.c |
| rm -f include/asm/proc include/asm/arch include/asm |
| |
| mrproper \ |
| distclean: clobber unconfig |
| |
| backup: |
| F=`basename $(TOPDIR)` ; cd .. ; \ |
| gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F |
| |
| ######################################################################### |