| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2014 - 2015 Xilinx, Inc. |
| * Michal Simek <michal.simek@xilinx.com> |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <cpu_func.h> |
| #include <debug_uart.h> |
| #include <dfu.h> |
| #include <env.h> |
| #include <env_internal.h> |
| #include <init.h> |
| #include <image.h> |
| #include <lmb.h> |
| #include <log.h> |
| #include <net.h> |
| #include <sata.h> |
| #include <ahci.h> |
| #include <scsi.h> |
| #include <soc.h> |
| #include <malloc.h> |
| #include <memalign.h> |
| #include <wdt.h> |
| #include <asm/arch/clk.h> |
| #include <asm/arch/hardware.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/arch/psu_init_gpl.h> |
| #include <asm/cache.h> |
| #include <asm/global_data.h> |
| #include <asm/io.h> |
| #include <asm/ptrace.h> |
| #include <dm/device.h> |
| #include <dm/uclass.h> |
| #include <usb.h> |
| #include <dwc3-uboot.h> |
| #include <zynqmppl.h> |
| #include <zynqmp_firmware.h> |
| #include <g_dnl.h> |
| #include <linux/bitops.h> |
| #include <linux/delay.h> |
| #include <linux/sizes.h> |
| #include "../common/board.h" |
| |
| #include "pm_cfg_obj.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #if CONFIG_IS_ENABLED(FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) |
| static xilinx_desc zynqmppl = XILINX_ZYNQMP_DESC; |
| #endif |
| |
| int __maybe_unused psu_uboot_init(void) |
| { |
| int ret; |
| |
| ret = psu_init(); |
| if (ret) |
| return ret; |
| |
| /* |
| * PS_SYSMON_ANALOG_BUS register determines mapping between SysMon |
| * supply sense channel to SysMon supply registers inside the IP. |
| * This register must be programmed to complete SysMon IP |
| * configuration. The default register configuration after |
| * power-up is incorrect. Hence, fix this by writing the |
| * correct value - 0x3210. |
| */ |
| writel(ZYNQMP_PS_SYSMON_ANALOG_BUS_VAL, |
| ZYNQMP_AMS_PS_SYSMON_ANALOG_BUS); |
| |
| /* Delay is required for clocks to be propagated */ |
| udelay(1000000); |
| |
| return 0; |
| } |
| |
| #if !defined(CONFIG_SPL_BUILD) |
| # if defined(CONFIG_DEBUG_UART_BOARD_INIT) |
| void board_debug_uart_init(void) |
| { |
| # if defined(CONFIG_ZYNQMP_PSU_INIT_ENABLED) |
| psu_uboot_init(); |
| # endif |
| } |
| # endif |
| |
| # if defined(CONFIG_BOARD_EARLY_INIT_F) |
| int board_early_init_f(void) |
| { |
| int ret = 0; |
| # if defined(CONFIG_ZYNQMP_PSU_INIT_ENABLED) && !defined(CONFIG_DEBUG_UART_BOARD_INIT) |
| ret = psu_uboot_init(); |
| # endif |
| return ret; |
| } |
| # endif |
| #endif |
| |
| static int multi_boot(void) |
| { |
| u32 multiboot = 0; |
| int ret; |
| |
| ret = zynqmp_mmio_read((ulong)&csu_base->multi_boot, &multiboot); |
| if (ret) |
| return -EINVAL; |
| |
| return multiboot; |
| } |
| |
| #if defined(CONFIG_SPL_BUILD) |
| static void restore_jtag(void) |
| { |
| if (current_el() != 3) |
| return; |
| |
| writel(CSU_JTAG_SEC_GATE_DISABLE, &csu_base->jtag_sec); |
| writel(CSU_JTAG_DAP_ENABLE_DEBUG, &csu_base->jtag_dap_cfg); |
| writel(CSU_JTAG_CHAIN_WR_SETUP, &csu_base->jtag_chain_status_wr); |
| writel(CRLAPB_DBG_LPD_CTRL_SETUP_CLK, &crlapb_base->dbg_lpd_ctrl); |
| writel(CRLAPB_RST_LPD_DBG_RESET, &crlapb_base->rst_lpd_dbg); |
| writel(CSU_PCAP_PROG_RELEASE_PL, &csu_base->pcap_prog); |
| } |
| #endif |
| |
| static void print_secure_boot(void) |
| { |
| u32 status = 0; |
| |
| if (zynqmp_mmio_read((ulong)&csu_base->status, &status)) |
| return; |
| |
| printf("Secure Boot:\t%sauthenticated, %sencrypted\n", |
| status & ZYNQMP_CSU_STATUS_AUTHENTICATED ? "" : "not ", |
| status & ZYNQMP_CSU_STATUS_ENCRYPTED ? "" : "not "); |
| } |
| |
| int board_init(void) |
| { |
| #if CONFIG_IS_ENABLED(FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) |
| struct udevice *soc; |
| char name[SOC_MAX_STR_SIZE]; |
| int ret; |
| #endif |
| #if defined(CONFIG_ZYNQMP_FIRMWARE) |
| struct udevice *dev; |
| |
| uclass_get_device_by_name(UCLASS_FIRMWARE, "zynqmp-power", &dev); |
| if (!dev) |
| panic("PMU Firmware device not found - Enable it"); |
| #endif |
| |
| #if defined(CONFIG_SPL_BUILD) |
| /* Check *at build time* if the filename is an non-empty string */ |
| if (sizeof(CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE) > 1) |
| zynqmp_pmufw_load_config_object(zynqmp_pm_cfg_obj, |
| zynqmp_pm_cfg_obj_size); |
| printf("Silicon version:\t%d\n", zynqmp_get_silicon_version()); |
| |
| /* the CSU disables the JTAG interface when secure boot is enabled */ |
| if (CONFIG_IS_ENABLED(ZYNQMP_RESTORE_JTAG)) |
| restore_jtag(); |
| #else |
| if (CONFIG_IS_ENABLED(DM_I2C) && CONFIG_IS_ENABLED(I2C_EEPROM)) |
| xilinx_read_eeprom(); |
| #endif |
| |
| printf("EL Level:\tEL%d\n", current_el()); |
| |
| #if CONFIG_IS_ENABLED(FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) |
| ret = soc_get(&soc); |
| if (!ret) { |
| ret = soc_get_machine(soc, name, sizeof(name)); |
| if (ret >= 0) { |
| zynqmppl.name = strdup(name); |
| fpga_init(); |
| fpga_add(fpga_xilinx, &zynqmppl); |
| } |
| } |
| #endif |
| |
| /* display secure boot information */ |
| print_secure_boot(); |
| if (current_el() == 3) |
| printf("Multiboot:\t%d\n", multi_boot()); |
| |
| return 0; |
| } |
| |
| int board_early_init_r(void) |
| { |
| u32 val; |
| |
| if (current_el() != 3) |
| return 0; |
| |
| val = readl(&crlapb_base->timestamp_ref_ctrl); |
| val &= ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT; |
| |
| if (!val) { |
| val = readl(&crlapb_base->timestamp_ref_ctrl); |
| val |= ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT; |
| writel(val, &crlapb_base->timestamp_ref_ctrl); |
| |
| /* Program freq register in System counter */ |
| writel(zynqmp_get_system_timer_freq(), |
| &iou_scntr_secure->base_frequency_id_register); |
| /* And enable system counter */ |
| writel(ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_EN, |
| &iou_scntr_secure->counter_control_register); |
| } |
| return 0; |
| } |
| |
| unsigned long do_go_exec(ulong (*entry)(int, char * const []), int argc, |
| char *const argv[]) |
| { |
| int ret = 0; |
| |
| if (current_el() > 1) { |
| smp_kick_all_cpus(); |
| dcache_disable(); |
| armv8_switch_to_el1(0x0, 0, 0, 0, (unsigned long)entry, |
| ES_TO_AARCH64); |
| } else { |
| printf("FAIL: current EL is not above EL1\n"); |
| ret = EINVAL; |
| } |
| return ret; |
| } |
| |
| #if !defined(CONFIG_SYS_SDRAM_BASE) && !defined(CONFIG_SYS_SDRAM_SIZE) |
| int dram_init_banksize(void) |
| { |
| int ret; |
| |
| ret = fdtdec_setup_memory_banksize(); |
| if (ret) |
| return ret; |
| |
| mem_map_fill(); |
| |
| return 0; |
| } |
| |
| int dram_init(void) |
| { |
| if (fdtdec_setup_mem_size_base() != 0) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| ulong board_get_usable_ram_top(ulong total_size) |
| { |
| phys_size_t size; |
| phys_addr_t reg; |
| struct lmb lmb; |
| |
| if (!total_size) |
| return gd->ram_top; |
| |
| if (!IS_ALIGNED((ulong)gd->fdt_blob, 0x8)) |
| panic("Not 64bit aligned DT location: %p\n", gd->fdt_blob); |
| |
| /* found enough not-reserved memory to relocated U-Boot */ |
| lmb_init(&lmb); |
| lmb_add(&lmb, gd->ram_base, gd->ram_size); |
| boot_fdt_add_mem_rsv_regions(&lmb, (void *)gd->fdt_blob); |
| size = ALIGN(CONFIG_SYS_MALLOC_LEN + total_size, MMU_SECTION_SIZE); |
| reg = lmb_alloc(&lmb, size, MMU_SECTION_SIZE); |
| |
| if (!reg) |
| reg = gd->ram_top - size; |
| |
| return reg + size; |
| } |
| #else |
| int dram_init_banksize(void) |
| { |
| gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; |
| gd->bd->bi_dram[0].size = get_effective_memsize(); |
| |
| mem_map_fill(); |
| |
| return 0; |
| } |
| |
| int dram_init(void) |
| { |
| gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, |
| CONFIG_SYS_SDRAM_SIZE); |
| |
| return 0; |
| } |
| #endif |
| |
| #if !CONFIG_IS_ENABLED(SYSRESET) |
| void reset_cpu(void) |
| { |
| } |
| #endif |
| |
| static u8 __maybe_unused zynqmp_get_bootmode(void) |
| { |
| u8 bootmode; |
| u32 reg = 0; |
| int ret; |
| |
| ret = zynqmp_mmio_read((ulong)&crlapb_base->boot_mode, ®); |
| if (ret) |
| return -EINVAL; |
| |
| debug("HW boot mode: %x\n", reg & BOOT_MODES_MASK); |
| debug("ALT boot mode: %x\n", reg >> BOOT_MODE_ALT_SHIFT); |
| |
| if (reg >> BOOT_MODE_ALT_SHIFT) |
| reg >>= BOOT_MODE_ALT_SHIFT; |
| |
| bootmode = reg & BOOT_MODES_MASK; |
| |
| return bootmode; |
| } |
| |
| #if defined(CONFIG_BOARD_LATE_INIT) |
| static const struct { |
| u32 bit; |
| const char *name; |
| } reset_reasons[] = { |
| { RESET_REASON_DEBUG_SYS, "DEBUG" }, |
| { RESET_REASON_SOFT, "SOFT" }, |
| { RESET_REASON_SRST, "SRST" }, |
| { RESET_REASON_PSONLY, "PS-ONLY" }, |
| { RESET_REASON_PMU, "PMU" }, |
| { RESET_REASON_INTERNAL, "INTERNAL" }, |
| { RESET_REASON_EXTERNAL, "EXTERNAL" }, |
| {} |
| }; |
| |
| static int reset_reason(void) |
| { |
| u32 reg; |
| int i, ret; |
| const char *reason = NULL; |
| |
| ret = zynqmp_mmio_read((ulong)&crlapb_base->reset_reason, ®); |
| if (ret) |
| return -EINVAL; |
| |
| puts("Reset reason:\t"); |
| |
| for (i = 0; i < ARRAY_SIZE(reset_reasons); i++) { |
| if (reg & reset_reasons[i].bit) { |
| reason = reset_reasons[i].name; |
| printf("%s ", reset_reasons[i].name); |
| break; |
| } |
| } |
| |
| puts("\n"); |
| |
| env_set("reset_reason", reason); |
| |
| return 0; |
| } |
| |
| static int set_fdtfile(void) |
| { |
| char *compatible, *fdtfile; |
| const char *suffix = ".dtb"; |
| const char *vendor = "xilinx/"; |
| int fdt_compat_len; |
| |
| if (env_get("fdtfile")) |
| return 0; |
| |
| compatible = (char *)fdt_getprop(gd->fdt_blob, 0, "compatible", |
| &fdt_compat_len); |
| if (compatible && fdt_compat_len) { |
| char *name; |
| |
| debug("Compatible: %s\n", compatible); |
| |
| name = strchr(compatible, ','); |
| if (!name) |
| return -EINVAL; |
| |
| name++; |
| |
| fdtfile = calloc(1, strlen(vendor) + strlen(name) + |
| strlen(suffix) + 1); |
| if (!fdtfile) |
| return -ENOMEM; |
| |
| sprintf(fdtfile, "%s%s%s", vendor, name, suffix); |
| |
| env_set("fdtfile", fdtfile); |
| free(fdtfile); |
| } |
| |
| return 0; |
| } |
| |
| int board_late_init(void) |
| { |
| u8 bootmode; |
| struct udevice *dev; |
| int bootseq = -1; |
| int bootseq_len = 0; |
| int env_targets_len = 0; |
| const char *mode; |
| char *new_targets; |
| char *env_targets; |
| int ret, multiboot; |
| |
| #if defined(CONFIG_USB_ETHER) && !defined(CONFIG_USB_GADGET_DOWNLOAD) |
| usb_ether_init(); |
| #endif |
| |
| if (!(gd->flags & GD_FLG_ENV_DEFAULT)) { |
| debug("Saved variables - Skipping\n"); |
| return 0; |
| } |
| |
| if (!CONFIG_IS_ENABLED(ENV_VARS_UBOOT_RUNTIME_CONFIG)) |
| return 0; |
| |
| ret = set_fdtfile(); |
| if (ret) |
| return ret; |
| |
| multiboot = multi_boot(); |
| if (multiboot >= 0) |
| env_set_hex("multiboot", multiboot); |
| |
| bootmode = zynqmp_get_bootmode(); |
| |
| puts("Bootmode: "); |
| switch (bootmode) { |
| case USB_MODE: |
| puts("USB_MODE\n"); |
| mode = "usb_dfu0 usb_dfu1"; |
| env_set("modeboot", "usb_dfu_spl"); |
| break; |
| case JTAG_MODE: |
| puts("JTAG_MODE\n"); |
| mode = "jtag pxe dhcp"; |
| env_set("modeboot", "jtagboot"); |
| break; |
| case QSPI_MODE_24BIT: |
| case QSPI_MODE_32BIT: |
| mode = "qspi0"; |
| puts("QSPI_MODE\n"); |
| env_set("modeboot", "qspiboot"); |
| break; |
| case EMMC_MODE: |
| puts("EMMC_MODE\n"); |
| if (uclass_get_device_by_name(UCLASS_MMC, |
| "mmc@ff160000", &dev) && |
| uclass_get_device_by_name(UCLASS_MMC, |
| "sdhci@ff160000", &dev)) { |
| puts("Boot from EMMC but without SD0 enabled!\n"); |
| return -1; |
| } |
| debug("mmc0 device found at %p, seq %d\n", dev, dev_seq(dev)); |
| |
| mode = "mmc"; |
| bootseq = dev_seq(dev); |
| env_set("modeboot", "emmcboot"); |
| break; |
| case SD_MODE: |
| puts("SD_MODE\n"); |
| if (uclass_get_device_by_name(UCLASS_MMC, |
| "mmc@ff160000", &dev) && |
| uclass_get_device_by_name(UCLASS_MMC, |
| "sdhci@ff160000", &dev)) { |
| puts("Boot from SD0 but without SD0 enabled!\n"); |
| return -1; |
| } |
| debug("mmc0 device found at %p, seq %d\n", dev, dev_seq(dev)); |
| |
| mode = "mmc"; |
| bootseq = dev_seq(dev); |
| env_set("modeboot", "sdboot"); |
| break; |
| case SD1_LSHFT_MODE: |
| puts("LVL_SHFT_"); |
| fallthrough; |
| case SD_MODE1: |
| puts("SD_MODE1\n"); |
| if (uclass_get_device_by_name(UCLASS_MMC, |
| "mmc@ff170000", &dev) && |
| uclass_get_device_by_name(UCLASS_MMC, |
| "sdhci@ff170000", &dev)) { |
| puts("Boot from SD1 but without SD1 enabled!\n"); |
| return -1; |
| } |
| debug("mmc1 device found at %p, seq %d\n", dev, dev_seq(dev)); |
| |
| mode = "mmc"; |
| bootseq = dev_seq(dev); |
| env_set("modeboot", "sdboot"); |
| break; |
| case NAND_MODE: |
| puts("NAND_MODE\n"); |
| mode = "nand0"; |
| env_set("modeboot", "nandboot"); |
| break; |
| default: |
| mode = ""; |
| printf("Invalid Boot Mode:0x%x\n", bootmode); |
| break; |
| } |
| |
| if (bootseq >= 0) { |
| bootseq_len = snprintf(NULL, 0, "%i", bootseq); |
| debug("Bootseq len: %x\n", bootseq_len); |
| env_set_hex("bootseq", bootseq); |
| } |
| |
| /* |
| * One terminating char + one byte for space between mode |
| * and default boot_targets |
| */ |
| env_targets = env_get("boot_targets"); |
| if (env_targets) |
| env_targets_len = strlen(env_targets); |
| |
| new_targets = calloc(1, strlen(mode) + env_targets_len + 2 + |
| bootseq_len); |
| if (!new_targets) |
| return -ENOMEM; |
| |
| if (bootseq >= 0) |
| sprintf(new_targets, "%s%x %s", mode, bootseq, |
| env_targets ? env_targets : ""); |
| else |
| sprintf(new_targets, "%s %s", mode, |
| env_targets ? env_targets : ""); |
| |
| env_set("boot_targets", new_targets); |
| free(new_targets); |
| |
| reset_reason(); |
| |
| return board_late_init_xilinx(); |
| } |
| #endif |
| |
| int checkboard(void) |
| { |
| puts("Board: Xilinx ZynqMP\n"); |
| return 0; |
| } |
| |
| int mmc_get_env_dev(void) |
| { |
| struct udevice *dev; |
| int bootseq = 0; |
| |
| switch (zynqmp_get_bootmode()) { |
| case EMMC_MODE: |
| case SD_MODE: |
| if (uclass_get_device_by_name(UCLASS_MMC, |
| "mmc@ff160000", &dev) && |
| uclass_get_device_by_name(UCLASS_MMC, |
| "sdhci@ff160000", &dev)) { |
| return -1; |
| } |
| bootseq = dev_seq(dev); |
| break; |
| case SD1_LSHFT_MODE: |
| case SD_MODE1: |
| if (uclass_get_device_by_name(UCLASS_MMC, |
| "mmc@ff170000", &dev) && |
| uclass_get_device_by_name(UCLASS_MMC, |
| "sdhci@ff170000", &dev)) { |
| return -1; |
| } |
| bootseq = dev_seq(dev); |
| break; |
| default: |
| break; |
| } |
| |
| debug("bootseq %d\n", bootseq); |
| |
| return bootseq; |
| } |
| |
| enum env_location env_get_location(enum env_operation op, int prio) |
| { |
| u32 bootmode = zynqmp_get_bootmode(); |
| |
| if (prio) |
| return ENVL_UNKNOWN; |
| |
| switch (bootmode) { |
| case EMMC_MODE: |
| case SD_MODE: |
| case SD1_LSHFT_MODE: |
| case SD_MODE1: |
| if (IS_ENABLED(CONFIG_ENV_IS_IN_FAT)) |
| return ENVL_FAT; |
| if (IS_ENABLED(CONFIG_ENV_IS_IN_EXT4)) |
| return ENVL_EXT4; |
| return ENVL_NOWHERE; |
| case NAND_MODE: |
| if (IS_ENABLED(CONFIG_ENV_IS_IN_NAND)) |
| return ENVL_NAND; |
| if (IS_ENABLED(CONFIG_ENV_IS_IN_UBI)) |
| return ENVL_UBI; |
| return ENVL_NOWHERE; |
| case QSPI_MODE_24BIT: |
| case QSPI_MODE_32BIT: |
| if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH)) |
| return ENVL_SPI_FLASH; |
| return ENVL_NOWHERE; |
| case JTAG_MODE: |
| default: |
| return ENVL_NOWHERE; |
| } |
| } |
| |
| #if defined(CONFIG_SET_DFU_ALT_INFO) |
| |
| #define DFU_ALT_BUF_LEN SZ_1K |
| |
| void set_dfu_alt_info(char *interface, char *devstr) |
| { |
| u8 multiboot; |
| int bootseq = 0; |
| |
| ALLOC_CACHE_ALIGN_BUFFER(char, buf, DFU_ALT_BUF_LEN); |
| |
| if (!CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT) && |
| env_get("dfu_alt_info")) |
| return; |
| |
| memset(buf, 0, sizeof(buf)); |
| |
| multiboot = multi_boot(); |
| if (multiboot < 0) |
| multiboot = 0; |
| |
| multiboot = env_get_hex("multiboot", multiboot); |
| debug("Multiboot: %d\n", multiboot); |
| |
| switch (zynqmp_get_bootmode()) { |
| case EMMC_MODE: |
| case SD_MODE: |
| case SD1_LSHFT_MODE: |
| case SD_MODE1: |
| bootseq = mmc_get_env_dev(); |
| if (!multiboot) |
| snprintf(buf, DFU_ALT_BUF_LEN, |
| "mmc %d:1=boot.bin fat %d 1;" |
| "%s fat %d 1", |
| bootseq, bootseq, |
| CONFIG_SPL_FS_LOAD_PAYLOAD_NAME, bootseq); |
| else |
| snprintf(buf, DFU_ALT_BUF_LEN, |
| "mmc %d:1=boot%04d.bin fat %d 1;" |
| "%s fat %d 1", |
| bootseq, multiboot, bootseq, |
| CONFIG_SPL_FS_LOAD_PAYLOAD_NAME, bootseq); |
| break; |
| #if defined(CONFIG_SYS_SPI_U_BOOT_OFFS) |
| case QSPI_MODE_24BIT: |
| case QSPI_MODE_32BIT: |
| snprintf(buf, DFU_ALT_BUF_LEN, |
| "sf 0:0=boot.bin raw %x 0x1500000;" |
| "%s raw 0x%x 0x500000", |
| multiboot * SZ_32K, CONFIG_SPL_FS_LOAD_PAYLOAD_NAME, |
| CONFIG_SYS_SPI_U_BOOT_OFFS); |
| break; |
| #endif |
| default: |
| return; |
| } |
| |
| env_set("dfu_alt_info", buf); |
| puts("DFU alt info setting: done\n"); |
| } |
| #endif |