| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2014 |
| * NVIDIA Corporation <www.nvidia.com> |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <errno.h> |
| #include <log.h> |
| #include <asm/gpio.h> |
| #include <asm/io.h> |
| #include <asm/arch/pinmux.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/mc.h> |
| #include <asm/arch-tegra/clk_rst.h> |
| #include <asm/arch-tegra/pmc.h> |
| #include <linux/delay.h> |
| #include <power/as3722.h> |
| #include <power/pmic.h> |
| #include "pinmux-config-nyan-big.h" |
| |
| /* |
| * Routine: pinmux_init |
| * Description: Do individual peripheral pinmux configs |
| */ |
| void pinmux_init(void) |
| { |
| gpio_config_table(nyan_big_gpio_inits, |
| ARRAY_SIZE(nyan_big_gpio_inits)); |
| |
| pinmux_config_pingrp_table(nyan_big_pingrps, |
| ARRAY_SIZE(nyan_big_pingrps)); |
| |
| pinmux_config_drvgrp_table(nyan_big_drvgrps, |
| ARRAY_SIZE(nyan_big_drvgrps)); |
| } |
| |
| int tegra_board_id(void) |
| { |
| static const int vector[] = {TEGRA_GPIO(Q, 3), TEGRA_GPIO(T, 1), |
| TEGRA_GPIO(X, 1), TEGRA_GPIO(X, 4), |
| -1}; |
| |
| gpio_claim_vector(vector, "board_id%d"); |
| return gpio_get_values_as_int(vector); |
| } |
| |
| int tegra_lcd_pmic_init(int board_id) |
| { |
| struct udevice *dev; |
| int ret; |
| |
| ret = uclass_get_device_by_driver(UCLASS_PMIC, |
| DM_DRIVER_GET(pmic_as3722), &dev); |
| if (ret) { |
| debug("%s: Failed to find PMIC\n", __func__); |
| return ret; |
| } |
| |
| if (board_id == 0) |
| pmic_reg_write(dev, 0x00, 0x3c); |
| else |
| pmic_reg_write(dev, 0x00, 0x50); |
| pmic_reg_write(dev, 0x12, 0x10); |
| pmic_reg_write(dev, 0x0c, 0x07); |
| pmic_reg_write(dev, 0x20, 0x10); |
| |
| return 0; |
| } |
| |
| /* Setup required information for Linux kernel */ |
| static void setup_kernel_info(void) |
| { |
| struct mc_ctlr *mc = (void *)NV_PA_MC_BASE; |
| |
| /* The kernel graphics driver needs this region locked down */ |
| writel(0, &mc->mc_video_protect_bom); |
| writel(0, &mc->mc_video_protect_size_mb); |
| writel(1, &mc->mc_video_protect_reg_ctrl); |
| } |
| |
| /* |
| * We need to take ALL audio devices conntected to AHUB (AUDIO, APBIF, |
| * I2S, DAM, AMX, ADX, SPDIF, AFC) out of reset and enable the clocks. |
| * Otherwise reading AHUB devices will hang when the kernel boots. |
| */ |
| static void enable_required_clocks(void) |
| { |
| static enum periph_id ids[] = { |
| PERIPH_ID_I2S0, |
| PERIPH_ID_I2S1, |
| PERIPH_ID_I2S2, |
| PERIPH_ID_I2S3, |
| PERIPH_ID_I2S4, |
| PERIPH_ID_AUDIO, |
| PERIPH_ID_APBIF, |
| PERIPH_ID_DAM0, |
| PERIPH_ID_DAM1, |
| PERIPH_ID_DAM2, |
| PERIPH_ID_AMX0, |
| PERIPH_ID_AMX1, |
| PERIPH_ID_ADX0, |
| PERIPH_ID_ADX1, |
| PERIPH_ID_SPDIF, |
| PERIPH_ID_AFC0, |
| PERIPH_ID_AFC1, |
| PERIPH_ID_AFC2, |
| PERIPH_ID_AFC3, |
| PERIPH_ID_AFC4, |
| PERIPH_ID_AFC5, |
| PERIPH_ID_EXTPERIPH1 |
| }; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(ids); i++) |
| clock_enable(ids[i]); |
| udelay(2); |
| for (i = 0; i < ARRAY_SIZE(ids); i++) |
| reset_set_enable(ids[i], 0); |
| } |
| |
| int nvidia_board_init(void) |
| { |
| clock_start_periph_pll(PERIPH_ID_EXTPERIPH1, CLOCK_ID_OSC, 12000000); |
| clock_start_periph_pll(PERIPH_ID_I2S1, CLOCK_ID_CLK_M, 1500000); |
| |
| /* For external MAX98090 audio codec */ |
| clock_external_output(1); |
| setup_kernel_info(); |
| enable_required_clocks(); |
| |
| return 0; |
| } |