blob: d516270292a3081e630a92f3082df277c8eb3e6d [file] [log] [blame]
if STM32MP15x
config STM32MP15x_STM32IMAGE
bool "Support STM32 image for generated U-Boot image"
depends on TFABOOT
help
Support of STM32 image generation for SOC STM32MP15x
for TF-A boot when FIP container is not used
choice
prompt "STM32MP15x board select"
optional
config TARGET_ST_STM32MP15x
bool "STMicroelectronics STM32MP15x boards"
imply BOOTSTAGE
imply CMD_BOOTSTAGE
imply CMD_CLS if CMD_BMP
imply DISABLE_CONSOLE
imply PRE_CONSOLE_BUFFER
imply SILENT_CONSOLE
help
target the STMicroelectronics board with SOC STM32MP15x
managed by board/st/stm32mp1:
Evalulation board (EV1) or Discovery board (DK1 and DK2).
The difference between board are managed with devicetree
config TARGET_DH_STM32MP1_PDK2
bool "DH STM32MP1 PDK2"
help
Target the DH PDK2 development kit with STM32MP15x SoM.
config TARGET_MICROGEA_STM32MP1
bool "Engicam MicroGEA STM32MP1 SOM"
imply BOOTSTAGE
imply CMD_BOOTSTAGE
imply CMD_CLS if CMD_BMP
imply DISABLE_CONSOLE
imply PRE_CONSOLE_BUFFER
imply SILENT_CONSOLE
help
MicroGEA STM32MP1 is a STM32MP157A based Micro SOM.
MicroGEA STM32MP1 MicroDev 2.0:
* MicroDev 2.0 is a general purpose miniature carrier board with CAN,
LTE and LVDS panel interfaces.
* MicroGEA STM32MP1 needs to mount on top of this MicroDev 2.0 board
for creating complete MicroGEA STM32MP1 MicroDev 2.0 Carrier board.
MicroGEA STM32MP1 MicroDev 2.0 7" OF:
* 7" OF is a capacitive touch 7" Open Frame panel solutions with LVDS
panel and toucscreen.
* MicroGEA STM32MP1 needs to mount on top of MicroDev 2.0 board with
pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0 7"
Open Frame Solution board.
config TARGET_ICORE_STM32MP1
bool "Engicam i.Core STM32MP1 SOM"
imply BOOTSTAGE
imply CMD_BOOTSTAGE
imply CMD_CLS if CMD_BMP
imply DISABLE_CONSOLE
imply PRE_CONSOLE_BUFFER
imply SILENT_CONSOLE
help
i.Core STM32MP1 is an EDIMM SOM based on STM32MP157A.
i.Core STM32MP1 EDIMM2.2:
* EDIMM2.2 is a Form Factor Capacitive Evaluation Board.
* i.Core STM32MP1 needs to mount on top of EDIMM2.2 for
creating complete i.Core STM32MP1 EDIMM2.2 Starter Kit.
i.Core STM32MP1 C.TOUCH 2.0
* C.TOUCH 2.0 is a general purpose Carrier board.
* i.Core STM32MP1 needs to mount on top of this Carrier board
for creating complete i.Core STM32MP1 C.TOUCH 2.0 board.
endchoice
config STM32MP15_PWR
bool "Enable driver for STM32MP15x PWR"
depends on DM_REGULATOR && DM_PMIC
default y
help
This config enables implementation of driver-model pmic and
regulator uclass features for access to STM32MP15x PWR.
config SPL_STM32MP15_PWR
bool "Enable driver for STM32MP15x PWR in SPL"
depends on SPL && SPL_DM_REGULATOR && SPL_DM_PMIC
default y
help
This config enables implementation of driver-model pmic and
regulator uclass features for access to STM32MP15x PWR in SPL.
config SYS_TEXT_BASE
default 0xC0100000
config PRE_CON_BUF_ADDR
default 0xC02FF000
config PRE_CON_BUF_SZ
default 4096
config BOOTSTAGE_STASH_ADDR
default 0xC3000000
if BOOTCOUNT_GENERIC
config SYS_BOOTCOUNT_SINGLEWORD
default y
# TAMP_BOOTCOUNT = TAMP_BACKUP_REGISTER(21)
config SYS_BOOTCOUNT_ADDR
default 0x5C00A154
endif
if DEBUG_UART
config DEBUG_UART_BOARD_INIT
default y
# debug on UART4 by default
config DEBUG_UART_BASE
default 0x40010000
# clock source is HSI on reset
config DEBUG_UART_CLOCK
default 64000000
endif
source "board/st/stm32mp1/Kconfig"
source "board/dhelectronics/dh_stm32mp1/Kconfig"
source "board/engicam/stm32mp1/Kconfig"
endif