| /* |
| * Copyright (C) 2006 Freescale Semiconductor, Inc. |
| * |
| * Dave Liu <daveliu@freescale.com> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| */ |
| |
| #include <common.h> |
| #include <ioports.h> |
| #include <mpc83xx.h> |
| #include <i2c.h> |
| #include <spd.h> |
| #include <miiphy.h> |
| #include <command.h> |
| #if defined(CONFIG_PCI) |
| #include <pci.h> |
| #endif |
| #if defined(CONFIG_SPD_EEPROM) |
| #include <spd_sdram.h> |
| #else |
| #include <asm/mmu.h> |
| #endif |
| #if defined(CONFIG_OF_FLAT_TREE) |
| #include <ft_build.h> |
| #elif defined(CONFIG_OF_LIBFDT) |
| #include <libfdt.h> |
| #endif |
| #if defined(CONFIG_PQ_MDS_PIB) |
| #include "../common/pq-mds-pib.h" |
| #endif |
| |
| const qe_iop_conf_t qe_iop_conf_tab[] = { |
| /* ETH3 */ |
| {1, 0, 1, 0, 1}, /* TxD0 */ |
| {1, 1, 1, 0, 1}, /* TxD1 */ |
| {1, 2, 1, 0, 1}, /* TxD2 */ |
| {1, 3, 1, 0, 1}, /* TxD3 */ |
| {1, 9, 1, 0, 1}, /* TxER */ |
| {1, 12, 1, 0, 1}, /* TxEN */ |
| {3, 24, 2, 0, 1}, /* TxCLK->CLK10 */ |
| |
| {1, 4, 2, 0, 1}, /* RxD0 */ |
| {1, 5, 2, 0, 1}, /* RxD1 */ |
| {1, 6, 2, 0, 1}, /* RxD2 */ |
| {1, 7, 2, 0, 1}, /* RxD3 */ |
| {1, 8, 2, 0, 1}, /* RxER */ |
| {1, 10, 2, 0, 1}, /* RxDV */ |
| {0, 13, 2, 0, 1}, /* RxCLK->CLK9 */ |
| {1, 11, 2, 0, 1}, /* COL */ |
| {1, 13, 2, 0, 1}, /* CRS */ |
| |
| /* ETH4 */ |
| {1, 18, 1, 0, 1}, /* TxD0 */ |
| {1, 19, 1, 0, 1}, /* TxD1 */ |
| {1, 20, 1, 0, 1}, /* TxD2 */ |
| {1, 21, 1, 0, 1}, /* TxD3 */ |
| {1, 27, 1, 0, 1}, /* TxER */ |
| {1, 30, 1, 0, 1}, /* TxEN */ |
| {3, 6, 2, 0, 1}, /* TxCLK->CLK8 */ |
| |
| {1, 22, 2, 0, 1}, /* RxD0 */ |
| {1, 23, 2, 0, 1}, /* RxD1 */ |
| {1, 24, 2, 0, 1}, /* RxD2 */ |
| {1, 25, 2, 0, 1}, /* RxD3 */ |
| {1, 26, 1, 0, 1}, /* RxER */ |
| {1, 28, 2, 0, 1}, /* Rx_DV */ |
| {3, 31, 2, 0, 1}, /* RxCLK->CLK7 */ |
| {1, 29, 2, 0, 1}, /* COL */ |
| {1, 31, 2, 0, 1}, /* CRS */ |
| |
| {3, 4, 3, 0, 2}, /* MDIO */ |
| {3, 5, 1, 0, 2}, /* MDC */ |
| |
| {0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */ |
| }; |
| |
| int board_early_init_f(void) |
| { |
| volatile u8 *bcsr = (volatile u8 *)CFG_BCSR; |
| |
| /* Enable flash write */ |
| bcsr[9] &= ~0x08; |
| |
| return 0; |
| } |
| |
| int board_early_init_r(void) |
| { |
| #ifdef CONFIG_PQ_MDS_PIB |
| pib_init(); |
| #endif |
| return 0; |
| } |
| |
| int fixed_sdram(void); |
| |
| long int initdram(int board_type) |
| { |
| volatile immap_t *im = (immap_t *) CFG_IMMR; |
| u32 msize = 0; |
| |
| if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) |
| return -1; |
| |
| /* DDR SDRAM - Main SODIMM */ |
| im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; |
| |
| msize = fixed_sdram(); |
| |
| /* return total bus SDRAM size(bytes) -- DDR */ |
| return (msize * 1024 * 1024); |
| } |
| |
| /************************************************************************* |
| * fixed sdram init -- doesn't use serial presence detect. |
| ************************************************************************/ |
| int fixed_sdram(void) |
| { |
| volatile immap_t *im = (immap_t *) CFG_IMMR; |
| u32 msize = 0; |
| u32 ddr_size; |
| u32 ddr_size_log2; |
| |
| msize = CFG_DDR_SIZE; |
| for (ddr_size = msize << 20, ddr_size_log2 = 0; |
| (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) { |
| if (ddr_size & 1) { |
| return -1; |
| } |
| } |
| im->sysconf.ddrlaw[0].ar = |
| LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); |
| #if (CFG_DDR_SIZE != 128) |
| #warning Currenly any ddr size other than 128 is not supported |
| #endif |
| im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL; |
| im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS; |
| im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG; |
| im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0; |
| im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1; |
| im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2; |
| im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3; |
| im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG; |
| im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2; |
| im->ddr.sdram_mode = CFG_DDR_MODE; |
| im->ddr.sdram_mode2 = CFG_DDR_MODE2; |
| im->ddr.sdram_interval = CFG_DDR_INTERVAL; |
| __asm__ __volatile__ ("sync"); |
| udelay(200); |
| |
| im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN; |
| __asm__ __volatile__ ("sync"); |
| return msize; |
| } |
| |
| int checkboard(void) |
| { |
| puts("Board: Freescale MPC832XEMDS\n"); |
| return 0; |
| } |
| |
| #if defined(CONFIG_OF_BOARD_SETUP) |
| void ft_board_setup(void *blob, bd_t *bd) |
| { |
| #if defined(CONFIG_OF_FLAT_TREE) |
| u32 *p; |
| int len; |
| |
| p = ft_get_prop(blob, "/memory/reg", &len); |
| if (p != NULL) { |
| *p++ = cpu_to_be32(bd->bi_memstart); |
| *p = cpu_to_be32(bd->bi_memsize); |
| } |
| #endif |
| ft_cpu_setup(blob, bd); |
| #ifdef CONFIG_PCI |
| ft_pci_setup(blob, bd); |
| #endif |
| } |
| #endif |